1999 Emmegi LMS 300 M

Emmegi LMS 300 M

Year of construction: 2004, condition: good (used), Underfloor saw Manual operation For saw blade up to Ø 300 mm Mitre cutting left - right up to 45° Manual spray unit for emulsion Robust steel housing and support table made of grey cast iron 400V Dsdpfsy Nm Hisx Aiwjkl Mobile on base frame

Condition: refurbished (used), Year of construction: 2024, Manufacturer: Elumatec Type SA/ SAS 142 Overhaul year: 2024 Saw blade max. carbide: 500 mm Drive power saw motor: 4 KW Saw motor speed: 2800 min-1 Cutting speed saw blade 500 mm: 4400 m/min Saw height control: infinitely variable, fully electronic Working range square 90° max.: 130 x 130 mm Working range flat: 90° max.: 190 x 130 mm Working range round: 90° max.:150 mm Pneumatic feed length: 5-560, 10-1120 mm Compressed air connection, on site 6 bar Weight(saw)approx.: 800 kg Dimensions LxWxH (saw)approx.:2900mm x 1400mm x 1500mm Installation area LxW: 2900mm x 1400mm Additional description Elumatec SA/ SAS 142 4KW Retrofit Elumatec SA 142 4KW Retrofit Fully automatic sawing machine for non-ferrous metal and plastic Dsdpouiy Nyefx Aiwjkl After completion of the retrofit, the machine is in mint condition, both technically and visually. The machine will be overhauled in our company at the customer's request. Among other things, the following points were renewed: - Conversion to Siemens S7 PLC control - Conversion to Siemens HMI control panel - New electrical components - New pneumatic lines - Maintenance or replacement of all pneumatic cylinders and valve terminals - Maintenance of minimum lubrication system - Replacement of general wear parts - Overhaul of the cab Warranty: Unless otherwise agreed, we provide a 6-month warranty on all parts overhauled or replaced by us. Working time and wearing parts are excluded from the warranty. Optional: - Extension of the sawing area to flat 90° max.: 300 x 120 mm - Splitting extension (for a high-quality cut surface without return marks) - Servo-controlled material feed - Saw blade feed Servo-controlled - Mass clamping device Feed vice - Delivery and installation on your premises - Training of your employees

Condition: new, Extraction capacity of filter unit at spigot*: 350 m³/h Total power consumption*: 0.09 kW Operating voltage: 230 V, 50/60 Hz, 1PH + N + PE Noise level*: 52 db(A) Dkedpoh Rdwxsfx Aiwsl Dimensions L/W/H in mm: L 329 / W 374 /H 510 Colour: RAL 7035 Weight: 25 kg Manufacturer: ISI Industrieprodukte GmbH *Depending on the filter equipment Special voltage or special colour on request Application: Extraction of oil mist and smoke, for small to very large machine workrooms. Your advantages of the ELBARON series: - 18 unit variants available - Direct from the manufacturer - ISI-TRONIC as standard (digitalised filter control) - Electronically controlled EC fan as standard - Speed and air flow rate adjustable - Simplex (single-stage) or duplex (two-stage) available - Wide range of air flow rates available - Adaptable to pollutant load and air performance requirements - Large range of mounting and connection accessories - Quality Made in Germany We have developed the ELBARON® filter series for use in machining operations with pure oil or for separating oil mist and smoke. For many years now, the digital electrostatic air filters of the ELBARON® series have been among the most efficient filter units on the market and are in use worldwide. Our filter units are already digitalised as standard and can be controlled, for example, using a laptop. The ELBARON® unit series comprises 18 unit variants and can be optimally designed for your application in terms of size and performance. ELBARON® units impress with their long service life and absolute functional reliability. Our electrostatic filter cells are dimensioned in such a way that the best possible filter efficiencies, service lives and trouble-free operation are achieved under economic aspects.

Condition: excellent (used), Year of construction: 2014, machine/vehicle number: XZ 10480, rotational speed (max.): 3,500 rpm, Machine in working progress / 400 FCRO 32 mm / Sawing machine for the foam industry, Type Panda 400, M80, 1.9 kW, Year of manufacture 2014, Saw blade 400 mm, Total dimensions 1155 x 100 x 140 cm (with roller tables), Dimensions without roller tables: 71 x 100 x 140 cm. Dedpfx Aiow Iwaijwjkl

Condition: refurbished (used), Year of construction: 2024, Overhauled: 2024 Control: SPS Siemens S7 Saw blade max: 500 mm motor power 4,0 KW Saw blade feed: 0-40 mm/ s continuously adjustable Saw height control electronic Working range square 90° max.: 130 x 130 mm Working range flat 90° max.: 190 x 130 mm Dodpfx Aiouiy Ngswjkl Working range round 90° max.: 170 mm The machine has been completely overhauled in our company and is in mint condition. Among other things, the following points were renewed: Conversion to Siemens S7 PLC control Conversion to Siemens HMI user interface Conversion to pusher with servo control New electrical components New pneumatic lines New pneumatic components Conversion to valve terminal Optimization of the suction capacity New minimum lubrication system Replacement of general wear parts Overhaul of the cab The machine also has Minimum quantity lubrication Splitting extension (for a high-quality cutting surface without return marks) Pre-loading magazine for gentle handling of painted/anodized surfaces Offcut ejector in the pusher Foldable offcut tray Optional: Magazine width 3000mm Pusher length 6000mm Pusher length 8000mm Reinforced motor 5.5 kW Mass clamping device for parallel sawing of several workpieces Online support connection Delivery and installation on your premises Training of your employees

Year of construction: 1985, condition: excellent (used), machine/vehicle number: (20020324 EG) - VK-RES, DEMAG KBK crane canopy crane runway with dimensions approx. 16.5 x 7 m (7 m bridge - double-girder crane) Payload / lifting capacity 500 kg - 0.5 tonnes Technical specifications of the system: Crane runway made of Demag KBK2 rails System is supplied complete: KBK rails, rail connectors, trolleys, end plates, cable tray, brackets/suspension, etc. Incl. Demag PK2 500 kg chain hoist - lifting height approx. 4.5 m Crane is disassembled and immediately available Used condition, see pictures Item location: 75053 Gondelsheim Shipping via freight forwarder or pickup by appointment only Dsdjty S I Eepfx Aiwekl Demag KBK1, KBK2, and KBK3 rails are in stock! Other KBK systems are also in stock. Payload 125kg - 1600kg Please inquire about your crane runway, including load capacity and dimensions, without obligation.

Condition: used, Year of construction: 2018, Number of motors 1 Stück 0 2500 mm Control nein Hecht ES 350 single-sided glazing bead saw ----- Pneumatic pivoting against fixed stops. 45º/ 90º/ 135º with pneumatic sawblade feed Dedovpr N Rspfx Aiwokl pneumatic tilting via manual tilt stop with machine base, pneumatic clamping HM sawblade 350 x 3.0/2.2/30 Z 100 Saw stand dimensions: length 700 mm, depth 1,600 mm, height 1,500 mm 1.5 m touch stop 1.5 m support with support 3 m touch stop Support extension from 1.5 m to 3 m with support Table inserts grooved for rebated glazing beads HECHT ASB manual length stop with digital display, 2,500 mm With dust extraction unit (Technical specifications according to the manufacturer - no guarantee!)

Condition: ready for operation (used), Year of construction: 1994, Load capacity: 500kg, lifting speed: 6m/min. Documentation available. On-site inspection is possible. Dedpfewydghsx Aiwskl

Condition: new, saw blade diameter 350 x 32 mm capacity 90 degrees: round 120 mm capacity 90 degrees: square 105 x 105 mm capacity 90 degrees: flat 180 x 70 mm capacity 45 degrees: round 120 / 110 mm capacity 45 degrees: square 100x100 / 95x95 mm capacity 45 degrees: flat 135 x 60 mm turning speeds 1700 / 3400 U/min Control MEP NC total power requirement 1.5 / 2.2 kW weight of the machine ca. 290 kg range L-W-H 1240 x 1360 x 1800 mm Features: - Semi-automatic high-performance circular saw * For cuts from 45° right to 45° left * In aluminum and light metal alloys - MEP microprocessor control * Simple user interface with display and mechanical buttons * Start and end positions of the saw head can be saved Dkedpfx Asxaa Hnjiwel - Manually opened safety cover - Mechanical stops at -45°, +0°, and +45° * Enable quick positioning of the saw head - Pneumatic vise with quick-release clamp * Pneumatic clamping system allows adjustment of the clamping pressure * Depending on the hardness of the material to be cut * A pneumatic vertical vise is available as an option - Heavy-duty cast iron construction ensures . vibration-free operation and maximum precision - The saw head can also be tilted up to 45° - 2 sawing speeds - Base frame with lockable door - Pneumatic cooling and lubrication - Machine base frame Included in delivery: - Adjustable length stop 600 mm - Tool kit - Mounting adapter for feed roller conveyor including 1 support roller - Tool kit - Detailed operating instructions, maintenance manual, etc. - Machine is delivered without a saw blade!

Condition: used, Year of construction: 2000, with automatic stop The stop slides the material to be cut to the cutting position according to the entered measurement Saw blade: rising from below Dodpfx Aisx Srrvswekl Maximum saw blade diameter (mm): 300 right long table: with automatically adjustable stop Table length (mm): 3200 Table width (mm): 120 Roller conveyor left: roller conveyor length – 3550 mm, roller conveyor width – 310 mm Roller width (mm): 240 Roller conveyor and stop table: not separable Machine weight (kg): 80 without extraction system as shown