Used Spot Welder Tongs for sale (2,763)

Year of construction: 1999, condition: ready for operation (used), functionality: limited functionality, machine/vehicle number: N SERIE: 99 1220, Hot air Polypropylene box seam welder. Manually fed polypropylene welding machine. Ndedpjw Elrpjfx Abgjd

Condition: excellent (used), functionality: fully functional, WMA WMP 08 Spot Welders in TOP Condition, The unit shows barely any signs of use and has only been operated very occasionally. Air-cooled one-handed spot welding unit for vehicle manufacturing, tank construction, steel cabinet fabrication, sheet metal processing, and the wire industry. - Trouble-free welding of all sheet metals - Galvanized sheets can be welded perfectly thanks to controlled current rise and fall - Air-cooled, equipped for external water cooling - Tools can be easily changed using standardized rotating connectors - Only one plug required for welding current, control cable, and water cooling - Always reproducible welding results thanks to built-in automatic energy control Microprocessor Thyristor Control - Constant current regulation - Continuous process monitoring - Simple and ergonomic operation - All set parameters and process values are visible at a glance - Changes to welding parameters allowed only for authorized personnel - Management of configuration and program settings possible via a central PC WMA WMS 108 Microprocessor Thyristor Control - 7 time settings - 8 program slots - Built-in controller - Automatic mains frequency detection 50/60 Hz - Power outage-proof parameter storage - 'with/without current' toggle at the press of a button Additional configuration parameters (locked for user): - Program selection - Advance contact - Advance contact time - Two-hand lock (check) - Locking start signal - Current flow control - Response threshold - Current flow monitoring - Monitoring time - Current flow control - Power factor adjustment - Delay first half wave External inputs (24V, DC stabilized and switching): - Thermal switch - Thyristor temperature - EMERGENCY STOP - Start 1 - Start 2* - Pressure contact - Program 1* - Program 2* Ndedpoxrb Tgjfx Abgod - Pre-stroke ON - Program interruption after hold time (only force) - Two-hand lock (check)* * These functions can be activated or locked via configuration parameters. External outputs (24V, DC unstable ± 20%; + switching, max. 5 W): - Solenoid valve pre-stroke - Solenoid valve welding - Relay advance contact - Relay ready for operation Dispatch via freight carrier possible upon prior arrangement. #8407

Condition: ready for operation (used), functionality: fully functional, Equipment: 4 in one shovel, Longitudinal seam welder Plasma HN Automatic A/S with EWM Tetrix 400 Comfort Plasma, 3000 mm Nodpfjxqmu Tjx Abgodd

Condition: used, functionality: fully functional, • Welding length: up to 5m • Perfect streight welding result • Welding width: 24mm Ndsdpfx Asw Dp Ixjbged • Welds a variety of pvc and pvc-free materials by electrical impulse technology The machine is in good technical condition. Price is negotiable.

Condition: new, functionality: fully functional, The Brugger Grip 130 logging tongs with 3-ton rotator is the ideal solution for efficient logging and handling. logging and handling. These forwarding tongs offer an opening width of 130 cm and are Ndsdsrbidvopfx Abgjd equipped with a powerful rotator that enables precise control and rotation. rotation. The versatile attachment option makes the Grip 130 extremely flexible. It can be easily attached to the rear attachment with three-point linkage or on the front loader with Eur linkage. This adaptability enables effective wood processing in various application areas. areas of application. - Opening width 130cm - 3T rotator can be rotated through 360 - Two double-acting circles are required - Suitable for three-point linkage KAT 2 + 3 - Suitable for Euro mount front loader The robust construction and high-quality workmanship guarantee durability and reliability reliability even under demanding conditions. The Brugger Grip 130 is the perfect choice for farmers, foresters and anyone who needs a reliable grapple for their woodwork. timber work.

Condition: used, Year of construction: 2019, functionality: fully functional, machine/vehicle number: SC7.3 - 321ESE00112, cooling capacity: 7.32 kW (9.95 HP), type of input current: AC, type of cooling: air, overall weight: 90 kg, ambient temperature (max.): 31 °C, ambient temperature (min.): 1 °C, input voltage: 230 V, total width: 600 mm, total length: 490 mm, total height: 1,303 mm, warranty duration: 3 months, Equipment: type plate available, MTA Spotcooler SC7.3 Manufacturer: THERMOBILE INDUSTRIES BV Model: Coolmobile 25 (Industrial version) Mobile spot cooler Coolmobile 25 for targeted cooling of, for example, materials, cooling tunnels, specific room areas, and heat sources. The spot cooler is mobile on wheels and can be easily moved to the desired cooling location. The control panel has a temperature range from +1°C to +31°C and can be switched on and off automatically via a timer. The unit can be used anywhere with a standard Schuko plug (230V / 50Hz). Cold air can be distributed via three flexible hose nozzles. Warm air can be discharged using a flange and warm air hose (both not included in the scope of supply). Technical data: Cooling capacity / Kw: 7.32 (25,000 Btu) Airflow rate m³/h: 10.5 - 8.5 Power supply / V / Hz: 230 / 50 Starting current / A: 57 Operating current / A: 13 Power consumption / Kw: 2.6 Air filter: Aluminum and carbon Max. static pressure / mm: 30 WG ΔT °C: 10 - 15 Max. room size / m²: 58 Dimensions (W x H x D) / mm: 490 x 1303 x 600 Weight / kg: 90 Outlet: 3 x 125 mm Max. hose length / m: 12 Power cable length / m: 3 Refrigerant: R407C (1.2 kg) Dimensions (mm) L x W x H: 490 x 600 x 1303 Weight (kg): 90 Serial No.: 321ESE00112 Nsdpfx Abew Drtqsgjdd Year of manufacture: 2019 Condition: Visual: 2, Technically OK Used Used machines may have visual imperfections due to their previous use. (Technical changes and prior sale reserved!) Location: MTA Deutschland GmbH, 41334 Nettetal

Condition: excellent (used), L-sealer Brand: Smi Pack Model: FP 870 A Sealing frame length: 870 mm Sealing frame width: 600 mm Maximum film width: 800 mm Film bag thickness: 10 - 50 μm Accessories: Foot switch Roller conveyor: Length: 1000 mm Width: 550 mm Transport dimensions: Length: 1900 mm Njdoxk Uxmspfx Abgodd Width: 950 mm Height: 1500 mm Weight: 250 kg

Condition: used, Spot Welding Machine SCIAKY type S0 432 NT Capacity: from 0,5 to 6 mm thick Throat depth: 380 mm Arm spacing: from 190 to 340 mm Arm Length: de 250 à 500 mm Ndjdpfx Abjxnk Tnogjd Pressure: 6 bars Voltage: 380 V Width: 1100 mm Depth: 500 mm Total height: 1500 mm Weight: approx 500 KG

Condition: excellent (used), Year of construction: 2014, functionality: fully functional, Water-cooled, pneumatic spot welding tong Nimak L193 TB. Very good used condition, fully functional. Item located in 75053 Gondelsheim. See photos. Shipping by forwarding agent or collection. Nedpfx Asxmuypobgsdd

Condition: used, continuous power (apparent): 50 kVA, short-circuit current: 31 A, input voltage: 380 V, overall weight: 420 kg, welding power (max.): 126 kVA, Dear Sir or Madam, Below we offer you a DALEX spot welding machine "PMS 10-4", used and in very good condition. Technical data and dimensions: errors excepted. Prices are quoted: plus VAT ex stock, loaded free truck. Delivery time: immediately available from stock, subject to prior sale. Ndedpswtr Exofx Abgod Payment: advance payment. For further details, see PDF.

Year of construction: 2000, condition: used, TIG welder direct current 380 Volt for stainless steel Arkoquad 220 40 % ED at 220 AH 10 % ED at 140 AH with torch Nedpfx Aogt Auuobgedd Ground cable Pressure reducer Water cooling

Year of construction: 2014, condition: excellent (used), From operation resolution: Njdsm Tit Njpfx Abgsdd MIgatronic PI 250 DC Year of manufacture 2014 Pulse function HF ignition Water cooling without function Welding range: 5-250Ampere 250Ampere at 30% ED 180A at 60% ED 150A at 100% ED 220 Volt with 8meter torch(sheath partly damaged), ground cable and pressure reducer dimensions in mm approx. 1100x630x720 --Very well maintained unit-

Condition: excellent (used), functionality: fully functional, welding power (max.): 180 kVA, Schlatter Posiweld type Libra. Machine was built in 2005, control was upgraded by Schlatter in 2022. Ndodpfxoxlvn Eo Abgod

Condition: as good as new (ex-display), Year of construction: 2022, throat depth: 400 mm, nominal power at 50% duty cycle: 50 kVA, input voltage: 400 V, type of cooling: water, nominal power (apparent): 14 kVA, Spot Welding Machine Type 4666 TECNA – suitable for welding nuts and sheet metal – lightly used – fully overhauled and tested. Nsdpsh N Sd Uofx Abgjdd Rated voltage: 400V Rated power: 50kVA at 50% duty cycle Short-circuit current: 17kA Welding current: 13.6kA Fuse protection: 100A Connection cable L=3m mounted on machine Throat depth: 400mm Electrode force: 470daN Cylinder with pre-stroke Total stroke: 100mm Electrode taper: MK2 Weight: approx. 400kg - TE101 with digital welding current display, current ramp-up, etc. - Main switch on control cabinet - Original documentation / operating manual available - Machine inspection with certificate valid until 08/2025 Demonstration and inspection possible by appointment. Commissioning and operator training on site at customer location available at additional cost. Machine is located in Dresden, near A17. A suitable cooling unit is also in stock – additional price EUR 1,800,-.

Condition: ready for operation (used), Refurbished - 2008 UV - full or spot TG Color system Ndodpfsxhfwuex Abgod

Condition: refurbished (used), Power at 50%: 20kVA Short circuit-current: 19kA Electrode force: 187daN / single stroke Throat depth: 160mm --- Weld control: TE 91 (12-times, 2-program) --- Nsdoxl U Aujpfx Abgjdd Warranty: 12 months --- Spotwelding electrodes + spare parts at stock

Year of construction: 2002, condition: ready for operation (used), A longitudinal seam welding system Schnelldorfer is available. Welding process: TIG, sheet materials: carbon steel/stainless steel/aluminum, sheet thickness range: 0.5mm-10mm, max. welding speed: 7m/min, welding length: 2100mm, min. pipe inner diameter: 165mm, max. pipe outer diameter: 800mm, rail dimensions X/Y: 40mm/15mm. Machine dimensions X/Y/Z: approx. 4400mm/1850mm/3300mm, weight: approx. 4300kg, control: Siemens S7. Documentation available. An on-site inspection is possible. Nodpfxexl Uphj Abgsdd

Condition: excellent (used), Stud welder Ndedsvcl T Aopfx Abged Make TRW. Nelson Type Alpha 850 YEAR OF MANUFACTURE 1995 maximum welding capacity studs up to 12 mm welding current continuously adjustable from 100 - 850 A supply voltage 400 Volt , 32 A Transport dimension : length 550 mm width 320 mm height 380 mm

Condition: refurbished (used), functionality: fully functional, working width: 1,200 mm, Schlatter MG900, 1,200mm wide, with 4 x 100kVA transformers, updated control with Siemens S7-300 PLC from 2016. Mechanically completely rebuilt and all new control cables. Ndedpfx Aovvf T Ajbgsd

Condition: like new (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 21220, type of input current: AC, total height: 3,100 mm, total width: 4,000 mm, total length: 9,400 mm, overall weight: 8,600 kg, input voltage: 400 V, type of cooling: water, Resistance spot welding system LASO Tech Systems "WP Welding System" Year of manufacture: 2023 Serial number: 21220 Order number: 11B01 265845 Manufacturer: LASO Tech Systems GmbH, 98527 Suhl Type: WP welding system Total weight: approx. 8,600 kg Dimensions (L x W x H): approx. 9.4 x 4.0 x 3.1 m Rated voltage: 400 V / 3 Ph / 50 Hz Rated power: 138 kVA at 100% duty cycle Main Components: YASKAWA Positioner V2-500D3 L = 1650 Serial number: 466843-1-1 | Year of manufacture: 2022 | Weight: 1,409 kg | Item number: 411503 | Part No.: 148548-100 (Yaskawa Nordic AB, Sweden) Equipment: Servo rotary axis, swivel unit, Penlink rotary union (P/N 365003 – S/N 3197). Total unit weight: approx. 1,500 kg. Project assignment: LASO Tech, Project No. 30101293. Welding cell LASO WP-SLK Steel frame construction with safety enclosure, electrically interlocked access points. Integrated positioning systems (S1 / S2). Controller: LASO industrial PC / Siemens S7 / Robot controller compatible with YASKAWA Motoman. Power supply 400 V / 50 Hz / 138 kVA. Process control for resistance spot welding with cooling water, compressed air, and network interfaces. Full I/O wiring provided. YASKAWA Industrial Robot GP180 with Controller YRC1000 Type: YR-1-06VX180-A00 | Year of manufacture: 11/2022 | Payload: 180 kg | Own weight: 1,020 kg Serial number: 6V22Y2842450001 | Manufacturer: YASKAWA Europe Robotics d.o.o., Kocevje (Slovenia) Controller: YRC1000, type ERAS-1000-06VX280-E10, SN 6V22X2807840001, year: 10/2022 Power: 6.5 kVA, supply: AC 380–440 V, 50/60 Hz | Teach Pendant +RM1 | Integrated safety shutdown. Control Cabinet NIMAK multiCONTROL with Bosch Rexroth PRC7300 Type: PRC7300-L1-01VRS-0105-01-00002-EC-01 | Serial number: 7261404217680 Supply: 3~ 400–480 V / 110 A | Manufacturer: Bosch Rexroth AG, Lohr am Main Year: 2023 | Fully wired with safety modules and EMZ interface. Nedpfxexlixws Abgedd RSP Tool Changer System Manufacturer: Robot System Products (RSP), Sweden | Type: P8366-150 with tool changer P7501-036 (Sn 0001 / 0002) and docking units P8303A. Pneumatic, coolant, and signal transfer integrated. Connection via RobiFix. Welding Guns Gun 1 – NIMAK LRN 300-650-R54-175-150-P2U-WR Project: 95.011.360 | Machine No.: 2212–2129 N | Weight: 120.5 kg | Year: 2023 Transformer: Expert MF100-530 V-A.01 (SN: T-297432). Coupling: RSP P7501-036 + P8303A. Gun 2 – NIMAK CRN 300-650-R54-200-P2U-WL Project: 95.029.224 | Machine No.: 2212–2128 N | Weight: 109.5 kg | Year: 2023 Transformer: Expert MF100-530 V-A.01 (SN: T-297431). Coupling: RSP P7501-036 + P8303A. Welding Gun Cleaning Station (LASO Special Construction) Free-standing unit on steel base with SEW geared motor (400 V). Two round brushes Ø 180 mm x 150 mm. Condition and Scope of Delivery Entire system built 2022/2023, as new condition. All components including cabling, control cabinets, safety enclosure, and documentation are supplied. Dismantled and transport-secured as agreed.

Condition: refurbished (used), Year of construction: 2025, Power at 50%: 80kVA Short circuit-current: 35kA Electrode force: 100-600daN / single stroke Throat depth: 350-650mm --- Weld control: MPS 200 (8-times, 4-program) --- Ndsdpjxl Uv Uofx Abged Extra Equipment: - doppel foot pedal "currentless contact --- Warranty: 6 months --- Spotwelding electrodes + spare parts at stock

Condition: new, Year of construction: 2025, Power at 50%: 80kVA Short circuit-current: 35kA Electrode force: 100-600daN / single stroke Throat depth: 350-650mm --- Weld control: MPS 10beta (5-times, 8-program) --- Warranty: 12 months Nedpsxl Uudjfx Abgedd --- Spotwelding electrodes + spare parts at stock

Condition: new, Year of construction: 2025, Power at 50%: 100kVA Short circuit-current: 41,5kA Electrode force: 100-600daN / double stroke Throat depth: 350-650mm --- Weld control: MPS 10beta (5-times, 8-program) --- Nedpfx Abexl Ur Ajgodd Warranty: 12 months --- Spotwelding electrodes + spare parts at stock

Condition: new, Year of construction: 2025, Power at 50%: 40kVA Ndodpoxl Urcofx Abgod Short circuit-current: 26,2kA Electrode force: 100-600daN / single stroke Throat depth: 250-550mm --- Weld control: MPS 10 (5-times, 8-program) --- Extra Equipment: - doppel foot pedal "currentless contact" - forearm support --- Warranty: 12 months --- Spotwelding electrodes + spare parts at stock

Condition: new, Year of construction: 2025, Power rating at 50%: 2,5kVA Short-circuit current: 8,2kA Electrode force: 120daN (at 125mm Throat depth) weight: 11kg --- with Electrode arm 125mm --- welding control --- warranty: 12 months Nodpexl Uqxsfx Abgsdd