Used Tig Welding System for sale (43,652)

Condition: good (used), MERKLE Insquare W 300 AC/DC Welding Machine with original hose kit Primary: Voltage: 3 x 400 V Frequency: 50 (60) Hz cos phi: 0.95 TIG DC range: Open-circuit voltage: 80 V Working voltage: 10-22.8 V Welding current: 5-320 A Duty cycle 60% (10 min.) 320 A Duty cycle 80% (10 min.) 300 A Duty cycle 100% : 260 A (40°C) Primary continuous power: 9.5 kVA Primary continuous current: 13.7 A Primary peak current: 19 A TIG AC range: Open-circuit voltage: 80 V Working voltage: 10-22.8 V Welding current: 5-320 A Duty cycle 60% (10 min.) 320 A Duty cycle 80% (10 min.) 300 A Duty cycle 100% : 260 A (40°C) Primary continuous power: 9.5 kVA Primary continuous current: 13.7 A Primary peak current: 19 A Electrode welding: Electrode diameter: 1.5-6 mm Open-circuit voltage: 80 V Working voltage: 20-32.8 V Welding current: 5-320 A Duty cycle 60% (10 min.) 320 A Duty cycle 80% (10 min.) 300 A Duty cycle 100% : 260 A (40°C) Primary continuous power: 13.1 kVA Primary continuous current: 19 A Primary peak current: 22 A Welding processes: Selector switch, 10 levels: TIG DC Negative, TIG DC Positive, TIG DC Negative with start pulse, TIG AC low-noise, TIG AC Rectangular, TIG AC "Balanced TIG", Electrode Negative, Electrode Positive, Electrode "Sine wave", Electrode Rectangular Selector switch 1, 10 levels: Current 1, Time 1, Ramp-up and ramp-down time, Start current, End current, Ignition pulse, Spot time, Pre-flow and post-flow time Selector switch 2, 9 levels: Current 2, Time 2 (for pulse operation), AC Balance, AC Frequency, Hot start time and current, Current regulation, Electrode diameter, Display U Settings: 2 potentiometers for selector switches 1 and 2 Displays: 2 LED displays with preview and hold function for current, voltage, time, frequency Time functions: Selector switch, 4 levels: OFF, Pulse slow, Pulse fast, Spot welding Ignition: Selector switch, 4 levels: OFF, High frequency, Lift-Tig Energy control: Selector switch, 4 levels: on the machine, Hand or foot control, Welding torch Operating mode: Selector switch, 4 levels: 2-stroke, 4-stroke, 4-stroke with 2 currents, Gas test, Test, Program Program memory: 20 memory locations, freely assignable AC frequency: 50-200 Hz AC balance: 9-91% Gas pre-flow time: 0-3 s Gas post-flow time: 0-25 s Current ramp-up time: 0-2 s Current ramp-down time: 0-20 s Ignition pulse: 0-100 ms Spot time: 0.1-2.5 s Pulse slow: 10 ms-2.5 s Pulse fast: 50 Hz-5 kHz Dedpfx Aol Sm Hboilecn Hot start time: 0-1.5 s Hot start current: 10-200% Current regulation: 100-250% Button: Test protective device Button: Program selection LED: Power ON, Over temperature, Fault, Protection circuit, Display hold, Start current Ramp-up, Current 1, Current 2, Ramp-down, End current Power source: IGBT inverter Ignition: High frequency or Lift-Tig Standard: EN 60974-1 "S" / CE Torch connection: EURO central connection with 5-pin plug Torch cooling: Water-cooled Socket 50 mm²: Workpiece cable Socket 50 mm²: Electrode welding cable Power connection: 4 x 4 mm², 5 m long Gas connection hose: 2 m Weight: 130 kg (300 AC/DC) Dimensions L x W x H: 910 x 600 x 910 mm with gas cylinder holder Gas cylinder holder: 10 - 20 - 50 l gas cylinder You can find more items - new and used - in our shop! International shipping costs on request!

Condition: used, functionality: fully functional, overall weight: 7,500 kg, total length: 14,470 mm, total width: 3,500 mm, total height: 1,509 mm, We offer this used CSM automatic tube welding system, manufactured in 2014. Our general terms and conditions apply. Payment in advance required. Shipping costs not included. Dcjdpjz Hk Erjfx Ailen If you have any questions or require further information, please send us a message or call us. Recommended tube diameters: 5 - 15 mm Wall thicknesses: 0.40 - 1.00 mm Using the profiling unit, a stainless steel strip from a coil is formed into a tube by passing through seven profiling stations. The continuously profiled tube is welded in the welding chamber (TIG) in a continuous process. The torch tracking system can detect and automatically correct changes in the position of the material joint relative to the arc during the welding process. A measuring wheel mounted on the continuously moving tube continuously measures its speed and records the length. A double straightening device eliminates any residual curvature of the tube during the continuous process. A flex unit continuously cuts the tube and places it on the sorting rail for tubes that meet or do not meet the quality requirements. Two deburring stations deburr the tube ends, and an automatic length measurement system measures each tube before it is placed in the box. The tube welding system is fully functional and can be inspected while in operation.

Condition: good (used), We are selling a Merkle W 300 DC TIG direct current welding machine TIG direct current range: Open circuit voltage: 80 V Working voltage: 10-22.8 V Welding current: 5-320 A HSB 60 % ED (10 min.) 320 A HSB 80 % ED (10 min.) 300 A DB 100 % ED: 260 A (40°C) Primary continuous power: 9.5 kVA primary continuous current: 13.7 A primary maximum current: 19 A Weight: 130 kg Dimensions L x W x H: 910 x 600 x 910 mm with bottle holder Djdpju Sqqisfx Ailecn

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: 82397, type of input current: three-phase, welding current (max.): 420 A, Equipment: type plate available, MERKLE Insquare W 421 AC/DC water-cooled TIG welding system Manufacturer: MERKLE Model: Insquare W 421 AC/DC Year of manufacture: 2012 Serial number: 82397 Description For sale is a powerful AC/DC TIG welding system from MERKLE with water cooling. This system is suitable for professional welding applications on steel, stainless steel, aluminum, and other non-ferrous metals. The AC/DC technology allows for both DC and AC welding, covering a wide range of applications. With a welding current of up to 420 A, the system is ideal for industrial use in metal, tank, plant, and pipeline construction. The water cooling ensures continuous and reliable operation, even at high welding currents. Technical data Manufacturer: MERKLE Type: Insquare W 421 AC/DC Year of manufacture: 2012 Welding current range: 5 – 420 A AC frequency: 50 – 200 Hz Open-circuit voltage: 80 V Mains connection: 400 / 415 V, 50 / 60 Hz, 3~ Duty cycle at 40 °C: 420 A at 40 % 360 A at 60 % 310 A at 100 % Protection class: IP23 Water cooling Standard: EN 60974-1 Dcjdozamffspfx Ailen Scope of delivery MERKLE Insquare W 421 AC/DC Water cooling TIG torch Ground cable Foot pedal All information is subject to change without notice.

Condition: excellent (used), Professional 3M Speedglas welding set with Adflo powered air-purifying respirator (PAPR) system. Used equipment, fully functional, in good technical condition. Ideal for professional MIG/MAG, TIG, and shielded metal arc welding (SMAW) applications. ⚠️ Price is for 1 set (1 SET). The set includes: 3M Speedglas auto-darkening welding helmet, 3M Adflo PAPR system, Dcodpsy Ucnajfx Ailon waist belt, air hose, charger, Speedglas carrying bag, battery. Condition: used equipment, normal signs of use, visible in the photos, visor darkens properly, PAPR system starts and operates, complete set as shown in the photos. Applications: MIG/MAG welding, TIG welding, SMAW welding, industry, workshop, manufacturing, metalworking. Why it’s a good choice: reputable 3M Speedglas brand, very high level of comfort, respiratory protection thanks to the Adflo system, convenient carrying bag, professional, premium-class equipment. Shipping by courier or personal pickup is possible.

Condition: used, Year of construction: 2005, functionality: fully functional, total width: 6,300 mm, total height: 2,100 mm, total length: 20,000 mm, working width: 2,600 mm, input voltage: 380 V, type of input current: three-phase, roll width: 2,600 mm, roller length: 7,600 mm, We offer this ready-to-use ICO SYSTEM reactive PUR hot melt press, model ICO SYSTEM, manufactured in 2005. ICO SYSTEM reactive PU hot melt press line – 2,600 × 7,000 mm For sale: complete industrial reactive PU hot melt press line for single-sided bonding of large sheet materials. This robust production line from ICO SYSTEM International Coating GmbH has been successfully used for years by TABB Interior Systems BV for the production of high-quality laminated sheet materials. The installation is in excellent technical condition, is fully operational, and can be put into production immediately. Key features: Reactive PUR hot melt bonding Maximum panel size: 2,600 × 7,000 mm Suitable for single-sided bonding Year of manufacture: approx. 2005 Fully functional and well-maintained PLC control with touchscreen Automatic vacuum portal for precise panel positioning Throughfeed system for controlled curing and constant pressing force Roller conveyors and transport tables included Suitable for: The installation is suitable for bonding a variety of flat sheet materials, including: plywood MDF HDF particleboard HPL composite panels aluminum and steel sheets Dcodpfjzlh Aujx Ailsn various other industrial sheet materials. Production process The line is designed for an efficient and reproducible production process: positioning of the bottom sheet application of reactive PUR hot melt automatic placement of the top sheet using a vacuum portal passage through the heated press controlled curing and output of the finished product. Thanks to the automatic handling, large panels are produced quickly, accurately, and with consistent adhesive quality. Scope of supply The complete installation includes, among other things: ICO SYSTEM heated throughfeed system automatic vacuum portal with suction cups conveyor belts and roller conveyors control cabinet with PLC/HMI complete steel structure and handling. Condition The machine is fully operational, is still in use in production, and is available only due to a change in the production process. Inspection while running is possible by appointment. Interested? Please contact us for additional information, technical specifications, a demonstration, or an inspection. This high-quality industrial press line is ideally suited for companies that want to efficiently bond large sheet materials with a high-quality PUR hot melt bond.

Condition: good (used), Welding current: 10 - 200 A Dsdpfxsyrglco Ailocn Weight: 103 kg Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: good (used), machine/vehicle number: 75804, Welding current range, AC TIG: 7 - 390 A Welding current range, DC TIG: 6 - 230 A Electrical connection: 380 V, 45 A Dcodpfx Aieb Nv Irolon Space requirement: 1100 x 600 x 1370 mm

Condition: new, Year of construction: 2022, functionality: fully functional, machine/vehicle number: 21_0346, NEW - NEVER USED heavy-duty positioner for manual or robotic welding - lifting and turning device. Special Device for Special Tasks designed and produced by FÖRSTER welding systems GmbH. Max diameter of the workpiece: 2500 mm Max weight of the workpiece: 20 tons Dimensions of the welding positioner: 7000x3000x3750 mm Weight [without counterweigh]: 20 000 kg Overall dimensions of the whole system: 8900x4800x3750 mm Total weight of the whole system: 40 000 kg Counterweight included with the machine. Dedpfx Aiourlcrslocn Full documentation available. Manufacturer's technical support on request. Machine located in central Poland.

Year of construction: 2023, condition: used, functionality: fully functional, machine/vehicle number: SN-22-1409, For sale is a high-quality extraction system from the brand Absaugwerk, year of manufacture 2023, specifically designed for the collection and filtration of welding fume (e.g. aluminum dust). The system meets the latest technical standards and includes: Equipment: • Extraction table with downward extraction • Integrated wet separator in line with the latest safety standards • Suitable for professional welding applications • ATEX-compliant (Zone 2, Ex II 3G) • Power: 4.0 kW / 400 V / 50 Hz • Condition: almost as new, fully functional Collection by buyer. Assistance with dismantling/transport can be arranged if required. Djdsx Da Tispfx Ailjcn If you are interested or have any questions, please feel free to send me a message. On-site inspection by appointment is possible. More metalworking machines available, such as bench drill presses, press brakes, column drill presses, eccentric presses, heavy-duty racking, welding tables, MIG/MAG welding units, compressors, etc. – please check my other listings. Domestic price net plus VAT or Net export price Pick-up only – dismantling and transport by buyer or by arrangement. If you are interested or have any questions, please feel free to send me a message. More photos and technical details available on request. All information provided without guarantee or warranty. Subject to errors and prior sale. For further questions, please call. Nous parlons Francais / Мы говорим по русски We speak English / Noi vorbim româneste Viber / WhatsApp / Skype For an additional fee, we handle all customs and registration formalities. We transfer vehicles to the port for an extra charge.

Condition: like new (used), Year of construction: 2020, operating hours: 200 h, functionality: fully functional, arm reach: 1,437 mm, For sale: Panasonic robotic TIG welding workstation purchased from ValkWelding. Workstation includes: Panasonic TM 1400 G3 robot (6 axes, reach 1437 mm, payload 6 kg), two-axis L positioner PD1000/500, TIG welding unit Tetrix 352 AC/DC Synergic CW, accessories, and safety equipment. This workstation is distinguished by its ability to safely weld not only steels and stainless steels but also aluminum. The process is highly synchronized with wire feeding and is capable of seam tracking and adapting to changes in arc height. A very versatile device. Dcsdpfx Aioy Efmgjlon I am selling this system because our original capacity expectations have not been met (we don’t have work in the hundreds or thousands of pieces). Over its entire lifetime (approximately 5 years), the workstation was powered on for around 200 hours and did actual test welding for less than an hour in total. It is practically in like-new condition. It would be a pity for it to just “collect dust.” All support has been directly provided by ValkWelding. In case of sale, they will arrange installation, commissioning, and personnel training as agreed.

Year of construction: 2014, condition: ready for operation (used), An ultrasonic welding system with nine Telsonic Ultrasonic, cabin, nine generators and documentation is available. Control system: Siemens SIMATIC PANEL. On-site inspection is possible. Dsdpfjuy T Nqsx Ailjcn

Condition: good (used), Year of construction: 1980, TIG welding machine Messer Griesheim GW 200 DC 400 Volt Dcjdotd Hhdjpfx Ailen

Year of construction: 2002, condition: good (used), Machine type: Laser welding system Manufacturer: Arnold Factory number: 20435 DCS Year of manufacture: 2002 Available from January 2027 Available at the current location for self-dismantling. Dcsdpfjkv Upijx Ailon Optionally, we can offer dismantling and loading services.

Year of construction: 2010, condition: ready for operation (used), An ultrasonic welding system with two Telsonic TSP-3000-1P, cabin, generators and documentation is available. Welding force: 2500N, table dimensions: 420x415mm, height adjustment: 250mm, stroke: 100mm, control: Siemens SIMATIC PANEL, length: 762mm, width: 854mm, height: 1316mm, weight: 130kg. On-site inspection is possible. Dedpeuy T Ndefx Ailocn

Condition: used, Compact dust collector, dust extraction system HURRICAN Type Tonga BG32 / ST / 27-3000 Filter system, extraction system, central extraction system, cartridge impulse filter, dust extraction Cartridge filter system, rectangular filter system, central fume extraction system Ideal for plastics, metals, wood, etc. Manufacturer: DAMBAUER GmbH Air and Environmental Technology Brand: HURRICAN Model: Tonga Machine No. 50313000 62187 Year of construction 2014 Nominal volume flow 3000 m³/h Nominal volume flow 50 m³/sec Filter area 27 m² (9 pieces, each with 3 m²) Differential pressure 3699 Pa Extraction connection at the filter inlet Ø 250 mm Extraction diameter max. 355 mm (manufacturer's specification) Exhaust connection at the filter outlet 600 x 600 mm Compressed air connection 5 bar Compressed air requirement 60 standard liters per cleaning impulse Motor power 5.5 kW Mains connection 400 Volt, 50 Hz - Filter control via SIEMENS PLC S7-1200, with touch panel - Pneumatic filter cleaning, automatic via control - Control cabinet mounted on the extraction system - 9 filter cartridges, Type 51065081200, Ø 160 mm, length 1180 mm - Maintenance flap for filter replacement - Radial fan installed on the top inside, Type VUVI 500 DF - 2 mobile dust collection containers, each approx. 106 liters (ECO bins) Djdpfx Aoz Db Nijilocn - Firewater connection with sprinkler nozzle in the filter chamber - Electrical wiring diagram available - Silencer on the air outlet side 600 x 600 x 1000 mm Space requirement L x W 1850 x 1500 mm Width with silencer on the air outlet side 2500 mm Overall height 4050 mm Footprint 1080 x 1080 mm Weight 820 kg (manufacturer's specification) Weight 1070 kg (weighed) Very good condition Transport dimensions for horizontal transport: Length 420 cm x Width 190 cm x Height 200 cm Transport weight: 1150 kg

Condition: used, Micro welding head unit, spot welding system with welding head, inverter power source, I/O module, welding inverter MIYACHI PECO / AMADA WELD TECH GmbH Type ISQ20 Kompakt ISQ-AC/DC-AWS-EXT-250A 22KVA + PECO F160S Year of manufacture: 2011 The system consists of the following components: - Welding inverter MIYACHI PECO Type ISQ20 Kompakt ISQ-AC/DC-AWS-EXT-250A 22KVA with MFT1 control panel - External welding transformer MIYACHI PECO (mounted on the welding head frame) - External interface module MIYACHI PECO Type ISQ-MG - Spot welding head MIYACHI PECO Type F160S – 25 mm stroke with Heidenhain measurement system - Connection cables Mains voltage: 3x 400 V AC Mains frequency: 50 / 60 Hz Connected load: 22 KVA Welding current types: AC / DC Output current: max. 10 kA Dedpfx Aspy Uzysiljcn Output frequency: 1 - 10 kHz Welding time: max. 640 ms/pulse Current measurement: external toroidal coil Control panel: MFT1 (independent removable control unit) Analog input: pressure sensor for proportional valve Analog output: proportional valve control Interface: RS232 Protection class: IP30 - Error monitoring and process control - Monitoring of current, voltage, power, energy - Test pulse for part recognition - Program memory for 99 programs Inverter dimensions (W x H x D): 216 x 420 x 560 mm Inverter weight: approx. 21 kg Spot welding head MIYACHI PECO F160S Rated current: max. 5 kA Electrode stroke: 25 mm Closing stroke: pneumatic - Adjustable force ignition from 1.2 to 550 N - Heidenhain distance measuring system Welding unit with 5 pneumatic cylinders and Festo valve terminal Type CPX Welding head mounted on horizontal guide rail and can be moved 20 mm via pneumatic cylinder. 3 pneumatic cylinders available for workpiece clamping (2 units with 46 mm stroke, 1 unit with 20 mm stroke). Throat depth (distance from welding tip to frame): 300 mm Welding tip height above floor: 315 mm Welding unit dimensions (W x H x D): 410 x 760 x 700 mm Welding unit weight: 75 kg Total weight: 100 kg 2 nearly identical units available, price per complete unit.

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, type of input current: three-phase, Carton sealer, packaging machine, carton sealing machine, sealing tape machine, adhesive tape machine -Manufacturer: Soco System, carton sealer type T-55 -Carton width: max. 550 mm -Overall dimensions: 1100/800/1750 mm -Weight: 150 kg This additional information is standard for this model. Please always double-check the details during a visit. The Soco System T-55 Cartoning Machine is a state-of-the-art packaging solution designed for efficient and high-speed cartoning of various products. With its advanced technology and robust construction, the T-55 is ideal for industries requiring precise and reliable cartoning, such as food, pharmaceuticals, cosmetics, and consumer goods. Featuring a compact and ergonomic design, the T-55 maximizes floor space utilization while ensuring easy operation and maintenance. Its modular construction allows for flexibility in configuration, enabling seamless integration into existing production lines and adaptation to changing packaging requirements. The T-55 Cartoning Machine offers versatile carton handling capabilities, accommodating a wide range of carton sizes and styles, including straight-line, reverse-tuck, and glue-sealed cartons. It utilizes advanced automation and servo-driven mechanisms to ensure accurate carton forming, product loading, and sealing, minimizing downtime and enhancing productivity. Equipped with intuitive controls and a user-friendly interface, the T-55 provides operators with easy access to machine settings and diagnostics, facilitating quick setup and changeover between different carton formats. Additionally, the machine incorporates safety features to protect operators and prevent damage to products during operation. Overall, the Soco System T-55 Cartoning Machine is a reliable and efficient packaging solution that meets the demanding requirements of modern production environments, delivering consistent performance and high-quality cartoning results. Dcjdpfxozhv Rlo Ailon

Condition: used, Automatic Welding System Brand: Motoman / Robotec Dsdpfxox Dbiro Ailscn Model: W45/635/2.2/F1CS - A45 G59 Single-station welding system composed of: * 2 six-axis anthropomorphic robots * 1 two-column positioner Wire welding (MIG/MAG)

Year of construction: 2009, condition: ready for operation (used), Welding force: 2500N, table dimensions: 420x415mm, height adjustment: 250mm, stroke: 100mm, control: Telsonic MPS-4, connected load: 4000W, length: 459mm, width: 854mm, height: 1315mm, weight: 130kg. With SICK C4000 safety light curtains, cabin and documentation. On-site inspection is possible. Dcsdpsuy T I Hsfx Ailen

Condition: used, Ex-protected filter unit, extraction system, central extraction cartridge - impulse filter P. RIES GmbH Type 330 D ATEX Cartridge filter system, rectangular filter unit, central welding fume extraction Machine no. 10011932 Year of manufacture: 2020 - as new, unused Airflow rate: 3,300 m³/h Airflow rate: 0.9 m³/sec Filter area: 20 m² (1 piece cartridge filter) Differential pressure: 3,300 Pa (33 mbar) Extraction connection at filter inlet: 2x Ø 150 mm Exhaust connection at filter outlet: sound insulation hood Compressed air connection: approx. 8 bar Dcsdpfxoy N Duqs Ailjn Motor power: 3 kW Mains connection: 400 Volt, 50 Hz - Explosion-protected design ATEX II 2Db 125°C / 3G T4 - Pneumatic rotating filter cleaning, manual via push button - Manometer for differential pressure display (vacuum display in mbar) - Service door for filter replacement - Filter stage 1 = 1 cartridge filter Ø 325 mm, length 900 mm P-RIES, type cartridge filter 20.1 m², BGIA/IFA class M, antistatic - Filter stage 2 = filter outlet (sound insulation hood) equipped with 9 activated carbon filter cartridges, type AKZ 2500V, 266 m³/h per filter cartridge - Built-in radial fan, type IE 3-premium efficiency, 12% improved efficiency - Robust steel construction in RAL 7035 light grey, antistatic powder-coated - Dirt collection container as pull-out drawer approx. 70 litres (440 x 530 x 300 mm) - EC Declaration of Conformity, operating instructions with wiring diagram available Required space (L x W x H): 670 x 700 x 2430 mm Weight extraction unit: 211 kg Transport dimensions on pallet (L x W x H): 930 x 1350 x 1950 mm Weight incl. transport pallet: 236 kg As new, unused, ex stock

Condition: used, Stainless steel welding line MOD.50/60, made OLIMPIA 80 with TIG welder & Seam bead roller & Orbital polishing Specifications: Dcodpfxeymauts Ailjn - Diameter : 18 – 63.5 mm - Thickness : 0.5 – 3 mm - Length : 3 – 6 m - Speed : Up to 3 m/min Diameter: 18 – 63.5 mm Length: 3 – 6 m Speed: Up to 3 m/min

Condition: used, Welding fume extraction, filtration unit, dust extraction by LINCOLN NORWELD Central extraction system, extraction plant, silo filter, cartridge filter, pulse jet filter, dedusting filter Type FU-80-A Serial no. 001799 Year of manufacture: 1996 Airflow rate max. 6000 m³/h (depending on fan capacity) Filter area 80 m² (4 units of 20 m² each) Extraction inlet at filter entry Ø 250 mm Exhaust outlet at filter exit Ø 250 mm Compressed air connection 4 bar - without fan, without filter control - Filter category C, 99.9% separation efficiency - Pneumatic filter cleaning - Filter inlet with pneumatic shut-off valve - 4 used filter cartridges, Ø 325 mm, length 1200 mm - Service access hatch 240 x 240 mm Space required (L x W x H): 1400 x 1600 x 2970 mm Weight: approx. 300 kg In good condition Djdpfxexf Up Ie Ailjcn

Year of construction: 2019, condition: like new (used), functionality: fully functional, Laser Welding Robotic system for welding steel, stainless steel. Scope of supply: 1 x YASKAWA 6-axis robot YASKAWA MH6.(Payload: 6kg, H-Reach:1422mm, Robot Mass: 130kg, 2009.03) 1 x YASKAWA DX100 controller.( 2009.03 ) 1 x IPG YLS-1000 Ytterbium 1kW Laser.(2011.05) 1 x IPG P30 laser welding head with coaxial nozzle and cam.(2018.05) 1 x Cooling water circulation system RIEDEL for laser.(2011) 1 x Cooling water circulation system Chilly-35-S for optics.(2010). 1 x siegmund table 1200x800.(2019) 1 x IPG Welding Head Alarm Module Box WHAM.(2018.05) Dcjdpfx Aeh Ad E Heilen 1 x PC for Laser with LaserNet software. Machine can be inspected. Very good condition. Connected, can be tested. Shipping to EU countries is our responsibility and the shipping cost is free.

Condition: ready for operation (used), An automatic Weil tube welding system with rounder, tube transfer, end processing and Trumpf TruFlow laser unit is available. Tube diameter range: 80mm-250mm, material thickness range: 0.4mm-1mm, max. tube length: 1000mm. Documentation available. An on-site inspection is possible. Dsdjzg Iqzepfx Ailecn