Used Spot Welder Tongs for sale (1,768)

Condition: new, machine/vehicle number: DF0177, pressing force: 315 t, pressure:315 t table length:2500 mm table width:1800 mm stroke max.:800 mm dimensions:3910 x 4905 x 4169 mm weight:36 t column diameter:220 mm power capacity:25 kW work speed:1 - 10 mm/sec. :1 - 25 mm/sec :450 l :entfällt ? :entfällt ? Hodpfx Amefxyhisyer :entfällt ? :entfällt ? :enthalten ? :entfällt ? :entfällt ? :entfällt ? :entfällt ?

Condition: used, Year of construction: 2015, machine/vehicle number: 4273, pressing force: 110 t, pressure:110 t table length:1200 mm table width:1000 mm stroke max.:1150 mm Hodpfx Amed Ap Ugoyor dimensions:4200 x 2400 x 4800 mm draw back pressure:11 t stroke max.:1150 mm weight:16 t stroke of the table:1200 mm swivable table::45 Grad table load:12 t table speed:25 mm/sec table speed:10 mm/sec power capacity:23 kW voltage:400 V control voltage:24 V DC frequency:50 Hz work speed:0 - 10 mm/sec. :130 mm/sec :195 mm/sec. Colour:Grau 7035 RAL Colour:Orange 2009 RAL Colour:Dunkelgrau 7021 RAL Oil tank capacity:400 l Recommended oil:DIN HLP / ISO VG 46

Condition: as good as new (ex-display), Year of construction: 2015, machine/vehicle number: 4293, pressing force: 40 t, pressure:40 t table length:1000 mm table width:700 mm daylight opening:1200 mm No. of Cylinders:1 St. stroke length max.:1200 mm table height over floor:700 mm table extendable:1200 mm Speed of table:25 mm/sec Table tilting:45 Grad table load:5 t Fold-down upper tool:170 Grad Hedpfjdxrqxex Amyjr :1250 x 1000 mm :95 mm/sec speed of return flow:80 mm/sec working speed:0 - 10 / 10 - 155 mm/sec dimensions:4300 x 2700 x 4500 mm total weight:8,5 t Monitor Siemens:9 Zoll :1200 mm

Condition: good (used), 2 used water-cooled spot welding machines Hodpfjy Naq Isx Amysr Technical data: Max. welding output: 23.7 kVA Rated output at 50% duty cycle: 8 kVA Short-circuit current: 8.8 kA Open-circuit voltage in 4 steps: from 2 – 3.2 V Electrode force: 17 – 235 daN Cooling water flow rate: 4 l/min Weight: 85 kg per machine Price: 550,-- EUR net per machine Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Year of construction: 2024, condition: new, Parameter: JSW-3000 Laser power: 3000W Life span of laser source: 100,000 hours Laser wavelength: 1064 - 1070nm Cable: 10m (15m on request) Operating temperature: -10 - 45℃ Working environment humidity%: 10 - 90% Hsdpfxjtwz Nmo Amysr Positioning: laser pointer (red dot or line) Protective gas: Nitrogen / Argon / Oxygen Power supply: 3-phase 380V 50/60 HZ Maximum total energy consumption: 24.6KVA/37.4A Average energy consumption: 14.7KVA Unit operation status indication: Operating status indication regarding water cooler, protective mirror temperature, controller temperature Thickness of welded sheets: 0.5 - 8mm Maximum gap width: ≤2mm Laser beam width in cleaning function: 0 - 70mm Cooling method: water-based Control method: touch panel / monitor and PLC Wire feeder - fully automatic Weight of the machine: 195kg Machine dimensions: Height: 1050mm, Width: 530mm, Length: 1240mm. Material processing capabilities for JSW 3000W welding function. Material: Stainless steel 0.5 - 8mm Carbon steel 0.5 - 8mm Galvanized sheet metal 0.5 - 8mm Aluminum 0.5 - 6mm Price includes: - JSW welding system of your choice - Laser source [MAXPhotonics or Raycus]. - Automated wire feeder - Working gun with the function of working in modes: welding, cleaning, cutting. - Integrated cooling system - Touch control panel with menu in Polish language - Set of welding nozzles - Spare safety glasses - Safety glasses OD6+ - Welding mask OD8+ - Warranty 24 months

Year of construction: 2024, condition: new, Parameter: JSW-1500 Laser power: 1500W Life span of laser source: 100,000 hours Laser wavelength: 1064 - 1070nm Cable: 10m (15m on request) Operating temperature: -10 - 45℃ Working environment humidity:%: 10 - 90% Positioning: laser pointer (red dot or line) Protective gas: nitrogen / argon / oxygen Power supply: 1-phase 220V 50/60 HZ Maximum total power consumption: 8.2KVA/37.3A Average power consumption: 4.9KVA Unit operation status indication: Operating status indication regarding water cooler, protective mirror temperature, controller temperature Thickness of welded sheets: 0.5 - 8mm Maximum gap width: ≤2mm Laser beam width in cleaning function: 0 - 70mm Cooling method: water-based Control method: touch panel / monitor and PLC Wire feeder - fully automatic Weight of the machine: 175kg Machine dimensions: Height 800mm, Width 540mm, Hjdpetwzhvofx Amyjr Length 900mm. Material processing capabilities for the JSW 1500W welding function. Material: Stainless steel 0.5 - 5mm Carbon steel 0.5 - 5mm Galvanized sheet metal 0.5 - 5mm Aluminum 0.5 - 4mm Price includes: - JSW welding system of your choice - Laser source [MAXPhotonics or Raycus]. - Automated wire feeder - Working gun with the function of working in modes: welding, cleaning, cutting. - Integrated cooling system - Touch control panel with menu in Polish language - Set of welding nozzles - Spare safety glasses - Safety glasses OD6+ - Welding mask OD8+ - Warranty 24 months

Year of construction: 2024, condition: new, Parameter: JSW-2000 Laser power: 2000W Life span of laser source: 100,000 hours Laser wavelength: 1064 - 1070nm Cable: 10m (15m on request) Operating temperature: -10 - 45℃ Working environment humidity%: 10 - 90% Positioning: laser pointer (red dot or line) Protective gas: Nitrogen / Argon / Oxygen Power supply: 1-phase 220V 50/60 HZ Maximum total energy consumption: 10.6KVA/48.3A Average power consumption: 6.4KVA Unit operation status indication: Operating status indication regarding water cooler, protective mirror temperature, controller temperature Thickness of welded sheets: 0.5 - 8mm Maximum gap width: ≤2mm Laser beam width in cleaning function: 0 - 70mm Cooling method: water-based Control method: touch panel / monitor and PLC Wire feeder - fully automatic Weight of the machine: 175kg Machine dimensions: Height 800mm, Width 540mm, Hsdpfx Ajtwzxujmyor Length 900mm. Material processing capabilities for the JSW 1500W welding function. Material: Stainless steel 0.5 - 6mm Carbon steel 0.5 - 6mm Galvanized sheet metal 0.5 - 6mm Aluminum 0.5 - 5mm Price includes: - JSW welding system of your choice - Laser source [MAXPhotonics or Raycus]. - Automated wire feeder - Working gun with the function of working in modes: welding, cleaning, cutting. - Integrated cooling system - Touch control panel with menu in Polish language - Set of welding nozzles - Spare safety glasses - OD6+ safety glasses - Welding mask OD8+ - Warranty 24 months

Condition: new, Year of construction: 2025, Laser Handheld Welding Machine – Welding – Cutting – Cleaning Compact, Flexible, Easy to Use • 2kW unit for welding up to 6mm steel, 5mm stainless steel, 4mm aluminum. • All our welding units feature water cooling • Industrial-grade machines for continuous operation. • Dual-wire feeder for use with up to 2 x 15 kg flux-cored wire reels, which can be operated simultaneously or individually. When both wire reels are activated, double the amount of wire is fed, allowing for the welding of very large seams. • Includes laser safety glasses, replacement nozzles, and protective lenses -TECHNICAL DATA Hedpfx Aey T N Rljmysr -Model: Revobotics 2KW LASER -Torch package length: 10m -Laser power: 2000W -Total weight: 160kg -Safety: Contact clamp -Wire feeder: Ø0.8, 1.0, 1.2, 1.6, 2.0, 2.5mm (dual-wire version) -Mild steel up to 6mm -Stainless steel up to 5mm -Aluminum up to 4mm -Power supply: 32A CEE -Dimensions (L x W x H): 1000mm x 410mm x 710mm -Water cooling: Yes

Condition: excellent (used), Spot welding tongs Dalex Type 3011/2 Throat depth 250 mm Rated power 2.4 KVA Hjdpfx Aoy Inwgsmyjr 380 Volt

Year of construction: 2025, condition: new, functionality: fully functional, working width: 2,400 mm, wire diameter (max.): 8 mm, mesh size: 6,000 mm, welding power (max.): 900 kVA, Double cross wire mesh welder VM-15/25-1000NC-UD-2C Technical characteristics - power: 14 x 63 kVA - drawing motors: 155 kW - el. voltage: 3 x 400 VAC - controlled by: PC - wire mesh dimension: 6000 x 2000 mm - wire diameter: 4-8 mm/6-10 mm - distance between line wires 150 mm and 200 mm - distance between cross wires from 150 to 200 mm - working speed 180 cross wires/min - machine dimension: 55 x 11 x 4 mm Hsdjuv Eg Hopfx Amyor - machine is operated by two workers

Condition: used, Year of construction: 2007, weight of the machine ca. 290 kg dimensions of the machine ca. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding unit for direct current welding (DC version) and for direct and alternating current welding (AC/DC version) based on an innovative arc forming process developed by Hermann GmbH. In application, the SHARC process leads to higher welding speed with simultaneous improvement of the weld quality and reduction of the ancillary welding costs (less distortion, improved penetration, reduced annealing colours of the workpiece, less hardening of the transition edge zones and, if required, no need for filler materials). --> Technical data Welding current type: DC --> Mains voltage (50/60 Hz): 400 V --> Phases: 3 --> Setting range: 10 -320 A --> Electrode setting range: 25- 280 A --> Welding voltage: 22 V --> Open circuit voltage without HF: 70 V --> Open circuit voltage with HF: 90 V Hsdpjwf Rg Ejfx Amysr --> Primary power: 23 kVA --> Duty cycle 60%: 320 --> Duty cycle 100%: 260 --> Cooling type: F --> Protection class: IP 23

Condition: used, Year of construction: 2007, weight of the machine ca. 290 kg dimensions of the machine ca. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding unit for direct current welding (DC version) and for direct and alternating current welding (AC/DC version) based on an innovative arc forming process developed by Hermann GmbH. In application, the SHARC process leads to higher welding speed with simultaneous improvement of the weld quality and reduction of the ancillary welding costs (less distortion, improved penetration, reduced annealing colours Hedpfswf Rgxox Amyor of the workpiece, less hardening of the transition edge zones and, if required, no need for filler materials). --> Technical data Welding current type: DC --> Mains voltage (50/60 Hz): 400 V --> Phases: 3 --> Setting range: 10 -320 A --> Electrode setting range: 25- 280 A --> Welding voltage: 22 V --> Open circuit voltage without HF: 70 V --> Open circuit voltage with HF: 90 V --> Primary power: 23 kVA --> Duty cycle 60%: 320 --> Duty cycle 100%: 260 --> Cooling type: F --> Protection class: IP 23

Condition: used, Year of construction: 2007, weight of the machine ca. 290 kg dimensions of the machine ca. 1050 x 560 x 840 mm The SHARC T power source is a TIG welding unit for direct current welding (DC version) and for direct and alternating current welding (AC/DC version) based on an innovative arc forming process developed by Hermann GmbH. In application, the SHARC process leads to higher welding speed with simultaneous improvement of the weld quality and reduction of the ancillary welding costs (less distortion, improved penetration, reduced annealing colours of the workpiece, less hardening of the transition edge zones and, if required, no need for filler materials). --> Technical data Welding current type: DC --> Mains voltage (50/60 Hz): 400 V --> Phases: 3 --> Setting range: 10 -320 A --> Electrode setting range: 25- 280 A Hedpfx Aswf Rgrsmyjr --> Welding voltage: 22 V --> Open circuit voltage without HF: 70 V --> Open circuit voltage with HF: 90 V --> Primary power: 23 kVA --> Duty cycle 60%: 320 --> Duty cycle 100%: 260 --> Cooling type: F --> Protection class: IP 23

Condition: new, functionality: fully functional, Year of construction: 2026, machine/vehicle number: WG002553, Make/model: MCWEL M630 ( Miller ) Rated DC output: 26.4kW Rated current: 550A Voltage: 20 – 45V Current range: 55 – 550A Rated duty cycle: 60% Applicable electrode: 1.6 – 8.0mm Engine model: F3L912 Rate output: 28kW /1800rpm, 60Hz Hjdpfx Amovznbysysr Cooling system: air-cooled environment conditions Dimension: L – 1,525mm x W – 760mm x H – 1,050mm Weight: 900kg

Condition: excellent (used), functionality: fully functional, WMA WMP 08 Spot Welders in TOP Condition, The unit shows barely any signs of use and has only been operated very occasionally. Air-cooled one-handed spot welding unit for vehicle manufacturing, tank construction, steel cabinet fabrication, sheet metal processing, and the wire industry. - Trouble-free welding of all sheet metals - Galvanized sheets can be welded perfectly thanks to controlled current rise and fall - Air-cooled, equipped for external water cooling - Tools can be easily changed using standardized rotating connectors - Only one plug required for welding current, control cable, and water cooling - Always reproducible welding results thanks to built-in automatic energy control Microprocessor Thyristor Control - Constant current regulation - Continuous process monitoring - Simple and ergonomic operation - All set parameters and process values are visible at a glance - Changes to welding parameters allowed only for authorized personnel - Management of configuration and program settings possible via a central PC WMA WMS 108 Microprocessor Thyristor Control - 7 time settings - 8 program slots - Built-in controller - Automatic mains frequency detection 50/60 Hz Hjdpfxexrb Tgo Amysr - Power outage-proof parameter storage - 'with/without current' toggle at the press of a button Additional configuration parameters (locked for user): - Program selection - Advance contact - Advance contact time - Two-hand lock (check) - Locking start signal - Current flow control - Response threshold - Current flow monitoring - Monitoring time - Current flow control - Power factor adjustment - Delay first half wave External inputs (24V, DC stabilized and switching): - Thermal switch - Thyristor temperature - EMERGENCY STOP - Start 1 - Start 2* - Pressure contact - Program 1* - Program 2* - Pre-stroke ON - Program interruption after hold time (only force) - Two-hand lock (check)* * These functions can be activated or locked via configuration parameters. External outputs (24V, DC unstable ± 20%; + switching, max. 5 W): - Solenoid valve pre-stroke - Solenoid valve welding - Relay advance contact - Relay ready for operation Dispatch via freight carrier possible upon prior arrangement. #8407

Condition: excellent (used), Year of construction: 2014, operating hours: 11,065 h, functionality: fully functional, machine/vehicle number: 03001212-03.14, The ALPHA LASER ALM 200 laser welding machine was manufactured in Germany by Alpha Laser GmbH in 2014, but it has been in operation since 2017. This mobile laser welding machine is equipped with a 200 W laser source (9kW laser beam power), enabling the repair and modification of various components such as dies, molds, injection molds, tools, and machine parts in any selected location. Welding is performed in a semi-automatic mode. The mobile laser welding system features a narrow laser head, allowing access to the interior of the welded component. It is controlled via a computer, joystick, and foot switch. The machine is in very good technical and visual condition and has been regularly serviced. The machine comes with a table. Price: 170,000 PLN net (VAT invoice provided). Technical parameters of the ALPHA LASER ALM 200 laser welding machine: Hjdpfx Amotqtrfsyer – Power: 200 W – Wavelength: 1064 nm – Travel speed (X, Y, Z): 0-25 mm/s – Travel range (X, Y, Z): 140 x 120 x 1300 mm – Pulse energy: 90 J – Pulse duration: 0.5-20 ms – Pulse frequency: 100 Hz – Laser beam power: 9 kW – Laser beam diameter: 0.2-2.0 mm – Operating mode: Pulsed – Focal length: 150 mm – Power consumption: 380 V/ 50-60 Hz / 16 A/8kW – External dimensions: W-1410 x D-730 x H-1585 mm – Machine weight: approx. 320 kg – Operating hours: 11065 – Serial number: 03001212-03.14 Additional parameters and equipment of the ALPHA LASER ALM 200 laser: – Optics: LEICA microscope mount, 10x magnification, optionally 16x – Display with keyboard – Multifunctional foot switch – Joystick – Adjustable laser arm – Complete workstation with table – Option to purchase spare parts for the machine and accessories at a good price, e.g., lamps, hoses, wire guide holders, spheres/bases for parts, magnets, etc. – Option to purchase various types of welding wires at good prices – Option to purchase a fume extraction system

Condition: used, Year of construction: 1985, functionality: fully functional, machine/vehicle number: PS1/9173/9169/2, type of input current: three-phase, input voltage: 400 V, overall weight: 775 kg, electrical fuse: 105 A, compressed air connection: 5 bar, This Schlatter PS 130 is a robust, industrial spot welding machine renowned for its reliability in metal welding applications. Hodey Snycepfx Amyjr

Condition: good (used), Year of construction: 1988, machine/vehicle number: 03105, clearance between the columns: 1,300 mm, table width: 1,200 mm, table length: 1,500 mm, Weight: approx. 16,000 kg, table size: approx. 1500x1200 mm, distance between top plate and bottom plate max is 1550mm, with sliding table and separate control/operating panel Hedpfxotdnnme Amysr

Condition: good (used), Year of construction: 1970, functionality: fully functional, machine/vehicle number: 64511, stroke length: 500 mm, pressing force: 100 t, Very rarely used test press for running in new tools. Machine works perfectly Pressing force: 100 tons Distance table - punch: 500 mm Table size 1100 x 800 mm Weight: approx. 7 tons Dimensions: 2300x1100x3000 mm (LWH) Hydraulic unit: 1200x1200x1600 mm (LWH) Hjdpsm Rgh Tofx Amyor Free loading

Condition: ready for operation (used), Refurbished - 2008 UV - full or spot Hjdpexhfwuefx Amyor TG Color system

Year of construction: 2000, condition: used, TIG welding machine, DC, 380 volts, for stainless steel. Arkoquad 220, 40% duty cycle at 220 amps, 10% duty cycle at 140 amps, with torch. Ground cable, pressure reducer, water cooling. Hedpfx Aegt Auujmyjr

Condition: used, Dalex-Werke Hodpfxog Rcpxs Amyer Pms 10-2 380V 50Hz Rated power at 50% duty cycle: 63 kVA Secondary short-circuit current: 45 kA Rated primary voltage 380 V - 50 Hz Open-circuit voltage of 5.6 V Electrode force: 65-390 daN Machine weight: 341 kg

Year of construction: 1970, condition: used, Spot welding machine Manufacturer: Dalex Type: SF 16 Continuous power output: 16 kVA at 50% duty cycle. Hjdpfek Tt Hfsx Amysr

Year of construction: 2000, condition: good (used), machine/vehicle number: Nbg, Only brackets available !!! 1x steel chain hoist with 2 load strands each 125KG with a Müller Martini pneumatic stacking tongs - gripper - lifter bundle Camp type 0277.0401 Hjdpfx Amshy Eqhoysr including chassis for mounting on Stahl KT2000, ABUS HB, or Demag KBK For paper, pallets, cardboard boxes etc. Chain hoist with 2 lifting speeds (fine lift), lifting height/chain length approx. 4m Weight complete approx. 150 kg Connection to 400V 50Hz Good condition, fully functional Different years of construction, about 20 pieces available! Item location is 75053 Gondelsheim See pictures Shipping by forwarding agent or pick-up

Condition: excellent (used), Year of construction: 2001, pressure 100 t table length 2000 mm table width 1580 mm voltage 400 V max. table loading capacity 10.000 / 20.000 kg total power requirement 18 kW weight of the machine ca. 22 t dimensions of the machine ca. 5,65 x 2,95 x 5,85 m Serial no: 03.246.00 max. Distance between columns (width) 1620 mm d upper table no swiveling 10t / swiveling 6t d lower table 22t Hedpfxjucgqws Amysr