Used Spindle Router for sale (12,499)

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1750x1300x1150 mm Weight 600 kg Total power requirement 5,5 kw Dwjdsv A Hh Ujpfx Ab Tsf

Condition: good (used), Jack, support jack, lifting stand, bottle jack, mechanical lifting stand, axle jack -Lifting jack: Spindle jack -Type: unfortunately without a type designation Dodpfx Aex Eih Ejb Tewf -Height: 330 to 545 mm -Quantity: 1x lifting jack available -Dimensions: 240/140/H330 mm -Weight: 8.6 kg

Condition: ready for operation (used), Fanuc A06B-1401-B105 AC spindle motor, serial number: C194SB3A0, used, in good preserved condition, 100% functional, scope of delivery as per photos. Dwedpfx Ajx Eghcsb Tsf

Condition: used, Year of construction: 2001, spindle tilting: Ja -25 bis +45° height adjustment: elektrisch tilting adjustment: elektrisch read out tilting: digital read out spindle height: digital read out fence: Siko Zähler spindle diameter: 30 mm Dedpfxswx Nnbo Ab Tswf speeds: 1.500/3.000/4.000/4.500/5.000/6.000/8.000/9.000/10.000 U / min motor power: 7,5 kW motor brake: Ja, automatisch feeder: Wegoma 4 Rollen suction connection: 2 x 120mm machine length: 1900mm machine depth: 1400mm weight: 1000 kg

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Weiler Praktikant 160 B Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C from Technical College Inventory Technical Data: - Year of manufacture: 1992, Machine No. 92 160 3273 - Center height: 160 mm - Center distance: 650 mm - Spindle speeds: from 24 to 2500 rpm - Spindle bore: 40 mm - Short taper spindle nose DIN 55027 size 5 with bayonet lock - Tailstock Morse taper 3 - Feeds from 0.02 to 0.63 mm/rev - Thread cutting options: metric, inch, module, and diametral pitch - Metric thread pitches from 0.25 to 8 mm - Weight approx. 680 kg - Spindle brake can be engaged - Length 1.6 m, height 1.25 m, depth 0.7 m Accessories and Features: - 3-axis DRO by K&C with operating manual Functions: mm/inch switching, coordinate selection ABS/INC, value halving, reference mark, tool programming for up to 200 tools, taper calculation, radius/diameter display, quick zeroing, counting direction reversal, - Collet chuck with NEW collets from 3 to 26 mm in 1 mm increments - 160 mm three-jaw chuck (with 1 set of jaws) - Quick-change tool post with 4 tool holders - Bed stop - Electronic spindle guard - Rear splash guard - Coolant system - Operating manual, spare parts diagram About the Machine: Dsdpex Eb D Ejfx Ab Towf Offered is a Weiler Praktikant 160 B lead and feed screw lathe with toolroom accuracy, year 1992, in very good condition. The machine is, of course, fully functional. All carriage slides move very smoothly and evenly. The Weiler also runs quietly at high speeds. This newer generation of Weiler lathes is very user-friendly and allows for finishes similar to grinding. Take the opportunity to inspect this machine under power at our premises and see the condition for yourself. Immediately available.

Condition: good (used), Year of construction: 1966, functionality: fully functional, Digital display Dodpfxsx Eah Ae Ab Towf Centre height: 150 mm Swing over bed: 300 mm Distance between centres: 1000 mm 3-jaw chuck, Tool holder Chip guard Chip tray

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1300x900x1370 mm Weight 530 kg Dwodsv A Hh Iopfx Ab Tjf Total power requirement 5,5 kw

Condition: good (used), Swivel Spindle Milling Machine, Table Milling Machine, Bench Milling Machine Dwodpfx Ash Nvyzjb Tjf -Spindle adjustment: height and angle -Swivel: -3° to 45° -Drive: 4.5/5.5 kW -Speed: 3000/4500/6000/9000/12000 rpm -Feed apparatus Holz-Her 3 rolls -Useful shaft length: 100 mm -Spindle: Ø 30 mm -Max. Milling cutter: Ø 220 mm -Dimensions: 1540/1100/H1520 mm -Weight: 962 kg

Condition: ready for operation (used), Year of construction: 2001, operating hours: 120,000 h, General Data Machine weight 6000 kg Control Unit Brand FANUC Model 21i Dwedpfxsx D D Nbe Ab Tef Main Drive Number of axis 2 This Takisawa TT-200 BMC multi-spindle turning machine was manufactured in 2001. It features a twin-spindle (X + Z) horizontal CNC lathe configuration with a gantry forklift. Weighing approximately 6000 kg, it has both spindles operational, though the tool turret on the right side is broken. Contact us for more information about this machine. Application Types Turning

Condition: used, Year of construction: 2022, Optimum Optiturn TH5620V – Lathe with DPA and SWH Signs of use present • Hardened and ground Z-axis guideway • Spindle mount: Camlock DIN ISO 702-2 No. 8 • Precisely machined carriage • Handwheels with adjustable fine graduation 0.04 / 0.02 mm • All guides adjustable via gib strips • Shafts, gears, and main spindle running in oil bath • Compound slide adjustment range ± 90° • Guaranteed spindle nose runout accuracy better than 0.015 mm • Gear wheels move smoothly, hardened and ground, mounted with 2 adjustable precision tapered roller bearings • Clearly arranged selector levers for feed speed selection • Enclosed rapid-shift feed gearbox design • Gears and shafts hardened and ground, running in oil bath on precision bearings • Switches with lifecycle calculation, tested according to EN ISO 13849 Djdpfx Absx Dzxas Tswf • Bed carriage with reversible operation via shift spindle • Centralized lubrication on bed carriage • Leadscrew cover • Emergency stop pushbutton, motor protection switch, lockable main switch • Tailstock quill and handwheel with adjustable fine graduation 0.025 mm • Fast, simple, tool-free adjustment via clamping lever • Heavily ribbed prism bed, inductively hardened and precision-ground from cast iron • Coolant system with separate coolant tank, fill level indicator and oil separator; easy and complete draining and cleaning according to DIN • LED machine lamp in chip guard • Two gearbox stages • Spindle bore / bar capacity Ø 105 mm • Siemens Sinamics frequency converter / Safety Integrated • Drag chain for gentle routing of cables and hoses • Thread dial gauge scale adjustable • Quick-change toolholder SWH 7-C • 1 toolholder 32 x 150 Type D for 25 mm square tool bits • Digital position display DPA 21 • Glass scales Dimensions and Weight Length approx. 3450 mm Width/depth approx. 1150 mm Height approx. 1650 mm Weight approx. 2560 kg Working Range Centre height: 280 mm Centre distance: 1910 mm Swing over bed: 560 mm Swing in bed gap: 790 mm Swing over cross slide: 355 mm Turning length in bed gap: 170 mm Bed width: 350 mm Speed range Number of speed ranges: 2 Speed range: 25 – 1600 rpm Speed control: electronically adjustable Electrical Data Output power (motor): 7.5 kW Total power rating: 8.5 kW Connection voltage: 400 V Mains frequency: 50 Hz Coolant System Coolant pump capacity: 125 W Standards and Approvals Standard: DIN EN 55011 Tailstock Mount: MK 5 Quill travel: 180 mm Quill diameter: 75 mm Max. toolholder seat height: 25 mm Spindle taper: Ø 113 (Taper 1:20) mm Metric thread pitches: 0.1–14 mm/rev Number of metric threads: 47 Imperial thread pitches: 112–2 TPI Number of imperial threads: 60 Diametral pitch: 4–112 DPI Number of diametral pitch threads: 50 Module threads: 0.1–7 mm/rev Number of module threads: 34 Compound slide travel: 130 mm Cross slide travel: 316 mm Bed carriage travel: 1710 mm Longitudinal feed range: 0.031–1.7 mm/rev Number of longitudinal feeds: 42 Face feed range: 0.014–0.784 mm/rev Number of face feeds: 42

Condition: excellent (used), Year of construction: 1992, functionality: fully functional, Weiler Praktikant 160 B Lead and Feed Screw Lathe with 3-Axis Digital Readout by K&C from Vocational School Technical Data: >> Year of manufacture: 1992; Machine No. 92 160 3260 >> Centre height: 160 mm >> Centre distance: 650 mm >> Spindle speeds: from 24 to 2500 rpm >> Spindle bore: 40 mm >> Short taper spindle nose DIN 55027 size 5 with bayonet lock >> Tailstock: Morse taper 3 >> Feeds: from 0.02 to 0.63 mm/rev >> Thread cutting: metric, inch, module, and diametral pitch threads possible >> Metric thread pitches from 0.25 to 8 mm >> Weight approx. 680 kg >> Spindle brake can be engaged >> Length 1.6 m, Height 1.25 m, Depth 0.7 m Accessories and Equipment: >> 3-axis digital readout by K&C with manual Features: switching mm/inch, coordinate mode selection ABS/INC, halving of display value, reference mark, 200-tool programming, taper calculation, radius/diameter, quick zeroing, counting direction reversal >> Collet chuck with NEW collets from 3 to 26 mm (in 1 mm increments) >> 160 mm 3-jaw chuck (Kelistangen) with 1 set of jaws >> Quick-change toolpost with 4 steel holders >> Bed stop >> Electronic spindle guard >> Rear panel >> Coolant system >> Operating manual, spare parts diagram Dsdjx Eb A Ujpfx Ab Tewf About the machine: For sale is a Weiler Praktikant 160 B lead and feed screw lathe, toolroom accuracy, year 1992, in very good condition. The machine is of course fully functional. The carriages all run very smoothly and evenly. Even at high speeds, the Weiler runs quietly. This newer generation of Weiler lathes is very user-friendly and can produce surfaces with ground finish quality. Take the opportunity to inspect this machine under power on site and convince yourself of its condition.

Condition: excellent (used), Year of construction: 2024, INDEX MS22-8 Mfd. 2024 2 NCU (4) Y-Axis SL Control Cutting hours: 1,000 Turnkey Available Located in Europe 4-Meter IEMCA SIR MS22-8/43/P Rack loader 50 Hz D9-13-19-25 Bar length 4300 mm with drilling unit and minimum quantity lubrication unit additional end-of-bar sensor Bar stock 500mm (D12-D24) Bar stock 340 mm (D5-D11). Additional storage chain for 22 bars with Profinet interface. 1 11007253 (21711) 1 set (8 pieces) bar stock pushers, external clamping for bar stock diameters D7-D10 mm, internal clamping for bar stock diameters D13-D18 mm, consisting of: 8 bar stock pushers D12 8 rotating sleeves D12 1 10287026 (21712) 1 set (8 pieces) bar stock pushers, external clamping for bar stock diameters D11-D16 mm, internal clamping for bar stock diameters D19-D24 mm, consisting of: 8 bar stock pushers D18 8 rotating sleeves D18 1 10536056 (21713) 1 set (8 pieces) bar stock pushers for bar diameters D17 mm-D22 mm, consisting of: 8 bar stock pushers D23 8 rotating sleeves D23 1 10414481 (21702) 1 set (8 pcs.) of internal clamping sleeves D12mm for bar diameters D13 mm - D18 mm Drill diameter D8 mm. 1 10472413 (21704) 1 set (8 pcs.) of external stops D12 mm for bar diameters D13 mm - D18 mm pre-machined. 1 10264327 (21703) 1 set (8 pcs.) of internal clamping sleeves D18mm for bar diameters D19 mm - D24 mm Drill diameter D15mm. Dwsdpfx Aox Ddcuob Tof 1 10058206 (21705) 1 set (8 pcs.) of external stops D18 mm for bar diameter D19 mm - D24 mm pre-machined. 1 12123486 Drill for drilling unit consisting of: 1 indexable insert drill D 15 mm 10 indexable inserts for steel 2 solid carbide drills D 8 mm

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Dwsdpov A Hhzjfx Ab Tof Weight 190 kg Total power requirement 2,8 kw

Condition: good (used), Leadscrew and feedscrew lathe type Celtic 12 Centre height: 160 mm Centre distance: 500 mm Spindle speeds: 35 - 1560 rpm Dedsx Dy U Tjpfx Ab Tewf Multifix tool holder A Lathe chuck Live centre

Condition: ready for operation (used), Year of construction: 2025, This 3-axis QUICK CNC UE-481 was manufactured in 2025. It features a 1300 x 2500 x 200 mm working area, a 9 kW high-performance spindle, and a linear tool changer. The vacuum table has 6 zones, complemented by a Becker 250 m³/h vacuum pump. It includes a 3-sided safety fence with a front light barrier, tools, and dust extraction. If you are looking to get high-quality CNC routing capabilities consider the QUICK CNC UE-481 machine we have for sale. Contact us for more information. Application Types Dwsdpfex D Dnqsx Ab Tef CNC Wood Machining

Condition: ready for operation (used), additional equipment features: yes, Besturing: Siemens Sinumerik 840 C Siemens-aandrijving: 6SN1145-1BA00-OCAO Worklength with magnetic table: 1230 mm Worklenth without magnetic table: 1260 mm Grindingwidth: 600 mm Longitudinal travel X-axis (autom.): 1260 mm Cross-travel Y-axis (autom.): 630 mm Dedpfxjxuwxwj Ab Tjwf Travel Z-axis (autom.): 477 mm Dimensions of the table: 1215 x 500 mm Distance between table -- spindlecentre: 680 mm Max dia grindingstone: 406 x 50 x 127 mm Spindlespeeds: rpm Motorpower: 22 kW Cooling system: yes

Condition: new, Fanuc A06B-6052-H002 AC spindle servo unit, serial number as per photo, unused in opened original packaging, 100% functional, scope of delivery as per photos. Djdpjx Dwmyefx Ab Tewf

Condition: ready for operation (used), Year of construction: 2021, Main Drive Number of axis 3 This 3-axis H. Winter Routermax Basic 1325 Eco was manufactured in 2021. Ideal for precision CNC routing, this machine offers robust performance for woodworking and other detailed applications. Consider the opportunity to buy this H. Winter Routermax Basic 1325 Eco CNC router. Contact us for more information. Application Types CNC Wood Machining Djdpfex D D S Ajx Ab Tswf

Condition: new, Fanuc A06B-0845-B200 #3000 AC spindle motor SN: C994J1130, unused, 100% functional, delivery as per photos. ATTENTION: Please enquire separately for packaging and shipping costs! Dwodpfox Dt N Rox Ab Tef

Condition: ready for operation (used), Year of construction: 2025, Main Drive Number of axis 3 This 3-axis QUICK CNC KQ-63E was manufactured in 2025. It's a multi-spindle drilling machine capable of handling workpieces from 70 to 2800 mm in length and 50 to 1220 mm in width. Features include top and bottom milling spindles, a high-speed tool changer, and brushless servo motors. If you are looking to get high-quality drilling capabilities, consider the QUICK CNC KQ-63E machine we have for sale. Contact us for more information. Dedpfsx D Dnkex Ab Tewf Application Types Boring & Drilling (Wood)

Condition: ready for operation (used), Fanuc AC Spindle Motor Model 40P 4P 18.5/22kW max. 4500 RPM from IKEGAI TURN 25, L x W x H: 625 (+ shaft 140) x 315 x 400 mm, hole spacing of the fastening holes: 255 x 280 mm, Ø drive shaft: 60 mm, it is probably type A06B-0758-B201 #3000, used, normal signs of wear, 100% functional ATTENTION: Please inquire for charges for packing and transport separately! ATTENTION: Please inquire for charges for packing and transport separately! Dwjdei D H Sbjpfx Ab Tof

Condition: ready for operation (used), Year of construction: 2009, General Data Machine weight 4500 kg Dwedpfx Aox D Rdljb Tef Main Drive Spindle speed range 45–4500 Number of axis 4 Movement X-Axis Movement 130 mm X-Axis Rapid Traverse 24 m/min Z-Axis Movement 145 mm Z-Axis Rapid Traverse 24 m/min This 4-axis MURATA Muratec MD 120 was manufactured in 2009. A CNC 2-spindle, 2-turret precision lathe with FANUC FS31i – Model A control, it features a max turning diameter of Ø 120 mm and a max turning length of 75 mm. Spindle speeds reach up to 4,500 rpm, and it includes a chip conveyor. If you are looking to get high-quality turning capabilities, consider the MURATA Muratec MD 120 machine we have for sale. Contact us for more information. Application Types Turning

Condition: ready for operation (used), Year of construction: 2004, General Data Dwodpfxox D Ikce Ab Tsf Machine weight 5500 kg Workpiece Workpiece drm 15 mm Workpiece X 300 mm This EUBAMA S8 rotary transfer machine was manufactured in 2004. It handles parts up to 15 mm in diameter and approximately 300 mm in length. It operates on a 24 V control voltage and requires a 400 V, 50 Hz electrical connection. Weighing a maximum of 5.5 tons, the EUBAMA S8 machine we have for sale is robust and reliable. Contact us for further details regarding this rotary transfer machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 2008, General Data Machine weight 8300 kg Dwodpfx Abjx D R Iks Tef Main Drive Number of spindles 2 Spindle speed range 5000 Spindle motor power 22 kW Number of axis 9 Additional Equipment Automatic Conversational Programming System: Mapps 4 Automatic Effort Control and Tool Consumption Monitoring Oil Cooler for Both Spindles Double Pedal for Chuck Opening and Closing Interface for Bar Feeder Installation Automatic Rear Part Catcher (Special Clamp for Long Parts) Side Chip Conveyor (Hinged Type) Communication Ports: USB, PCMCIA Card, RS-232 Includes Electrical Transformer, Documentation, Parts List, Electrical Schematics, Programming, and Operation Manual This 9-axis MORI SEIKI NZ2000 was manufactured in 2008, offering advanced capabilities for precision horizontal turning. Ideal for complex machining tasks, this machine ensures efficient production with its multi-axis configuration. Consider the opportunity to buy this MORI SEIKI NZ2000 horizontal turning machine. Contact us for more information about this machine. Application Types Turning

Condition: ready for operation (used), Year of construction: 2021, Control Unit Brand Taiwan Model SYNTEC 60WE Main Drive Spindle speed range 6000–24000 Number of axis 3 Workpiece Workpiece X 2200 mm Workpiece Y 3700 mm Workpiece Z 200 mm Tools Type of tool holder ISO30 Dodpfox D S Nvox Ab Towf This 3-axis BLUE ELEPHANT ELECNC 2200x3700 was manufactured in 2021. It features a working area of 2200 mm by 3700 mm, a 9.6 kW HSD ATC spindle, and speeds ranging from 6000 to 24,000 RPM. Equipped with a Taiwan SYNTEC 60WE control system and Japanese YASKAWA 850W servomotors, consider the opportunity to buy this BLUE ELEPHANT ELECNC 2200x3700 CNC router. Contact us for more information about this machine. Application Types CNC Wood Machining