Used Router Table for sale (17,198)

Condition: used, Year of construction: 2019, incl. 4-roller feed unit Felder Variofeed 4 (3-18 m/min.) electronically controlled height and angle adjustment milling spindle D=30 mm Centrex access protection for milling milling fence max. cutter diameter 250 mm infinitely variable fine adjustment of the take-off side +35/-10 mm with digital display complete fence position-controlled adjustable milling fence can be folded up and down milling fence rails 550 mm ALU anodized with safety rulers quick clamping of the milling fence extension frame 1270 mm with emergency stop EURO run-in protection 5.5 kW motor with variable speed control speed range: 1500 - 10000 rpm speed range: 8000 - 15000 rpm HG spindle control panel at eye level with x-motion control table size: 1160 x 770 mm table opening: 320 mm swing-away device for feed unit on F 900 incl. extension for feed unit Dkedpsxta Dyofx Ac Nsh Location: Supplier

Condition: used, Year of construction: 1996, Incl. 3-roller feed, control panel on top, table extensions, pull-out support, tilting from -5° to +45°. Location: supplier Dedpfx Ajyfp N Roc Nskh

Condition: repair required (used), Year of construction: 1987, functionality: limited functionality, Table milling machine with 2 milling spindles Dedpeycq Aysfx Ac Nekh Table size: 1,500 x 800 mm Extendable rail on the table, length 2,500 mm Rail extendable up to approx. 640 mm from table front edge 2 extension pieces for the rail, each L = 850 mm Spindle diameter: 30 mm Usable spindle length approx. 140 mm Spindle 1 height-adjustable with mechanical digital display Spindle 2 height- and side-adjustable, with mechanical digital displays Max. tool diameter approx. 180 mm Distance between spindles approx. 550 mm Milling spindle locking mechanical via lever 2 motors, each 4.5 / 5.5 kW Motors with pole-changing function Forward/reverse operation 6 spindle speeds: 3000/4000/5000/6000/8000/10000 rpm Pneumatic milling spindle braking 2 extraction ports, diameter 120 mm Connection data: 400 V, 50 Hz, 3 Ph, N Additional notes: + Spindles heat up during operation. Therefore, likely necessary to replace bearings (not included in price) + Table insert rings for milling spindles are missing.

Condition: good (used), GF Milling machine with feed cast jaws Suva protection Dkedpfoi Hgxxjx Ac Nsh

Condition: new, Year of construction: 2025, Woodworking machinesTable routers Minimax twf55 es Item number: 5502261 Sturdy cast steel construction Anodized aluminum sliding carriage Large dimensioned milling unit made of grey cast iron, swivels up to -45° to the rear Four milling speeds from 3500 to 10000 min¯¹ Right-left rotation as standard Height and inclination display accurate to 1/10 mm Fast and easy speed change via eccentric clamping Solid and precise cast iron table, stress relieved and re-annealed for lasting precision Powerful 5.0 kW industrial motor Curved milling hood included in delivery Made in Italy Dimensions and weights Length (product) approx. 1200mm width/depth (product) approx. 2000mm Weight (net) approx. 510kg Connection suction suction connection diameter 2 x 120mm Work table working table length 1200mm working table width 530mm table height 900mm sliding carriage length 1200mm Slide width 360mm Slide height 142mm Installation information Required space length 2800mm Space requirement width/depth 2910mm Explanation of space requirements The dimensions take into account maximum travels or useful lengths. Machine body length 1200mm Machine body width/depth 846mm Working area length 1600mm Working area width/depth 2300mm Explanation of working area Please add the dimensions given with the space requirement to obtain the free installation area recommended for the machine. Electrical data Supply voltage 400V Mains frequency 50Hz Power drive motor 5,0kW Dksdei Dphtepfx Ac Njh Milling spindle spindle inclination 0 to -45 useful length of the spindle 125mm Spindeldrehzahl(en) 3500/6000/8000/10000min¯¹ Milling spindle speed indicator LED on the front of the machine spindle arbor diameter 30mm Milling tool diameter max. Tool diameter max. 240mm tool diameter max. lowerable 230mm tool diameter max. profile milling 240mm Tool diameter max. tenon milling 320mm EQUIPMENT Equipment Aluminum sliding carriage ✔ Milling fence Heavy-duty professional version with hold-down device, protective cover and aluminum milling fence jaws Telescopic miter fence with two folding stops Cantilever table ✔ Curved milling protective hood ✔ Eccentric clamp ✔ Handle on sliding carriage ✔ Height adjustment of the spindle manually Tilt adjustment of the spindle manual Control manual height and tilt adjustment of the milling unit Position of the control elements on the machine body location: ex stock 54634 Bitburg - immediately available -

Condition: new, Table router HOLZKRAFT t 45c LL With table extension right and left, Dkjdou U Rfpopfx Ac Njh and extendable workpiece support ----- Technical data ----- Table size: 1,945 x 695 mm, max. spindle projection over table: 130 mm, Useful length of milling spindle: 100 mm, max. retractable milling cutter Ø: 180 mm, Speeds: 3,500 / 7,000 / 10,000 rpm, Motor 400 V: 6.6 HP / 5.0 kW, suction nozzle Ø: 2 x 120 mm - Special offer price - - new exhibition machine -

Condition: as good as new (ex-display), Year of construction: 2024, Carriage length: 2500 mm Cutting width at the width stop: 1200 mm Cutting width at the cross-cut fence: 2500 mm Cutting depth: 100 mm Scorer: yes Height and tilt adjustment of saw blade: handwheel Width stop adjustment: manual Saw blade angle display: Scale Cutting height display: Scale Dedpfx Acjtpivkj Njkh Width stop display: Scala Cutting ruler display: Scala Saw blade diameter: 300mm Speeds: 4000 rpm Motor power / saw: 4.4 kW Motor brake: yes / automatic Tiltable cutter arbor: yes 0 - 45° Milling arbor height and tilt adjustment: handwheel Milling arbor height and tilt indicator: Scale Milling arbor: 30mm Milling arbor speed: 3000 / 6000 / 7500 / 10000 rpm Max. Tool diameter: 180 mm Motor power / cutter: 4.4kW Suction connection: 100 mm, 100 mm, 80 mm Machine length: 2500mm Machine width: 1500mm weight: 530kg

Condition: as good as new (ex-display), Year of construction: 2025, Carriage length: 2500 mm Cutting width at the width stop: 1000 mm Cutting width at the crosscut stop: 3000 mm Cutting depth: 125 mm Scoring cutter: yes Sawblade height and tilt adjustment: handwheel Width stop adjustment: manual Sawblade angle indicator: scale Cutting height indicator: scale Dedpfx Acowhuuxs Njkh Width stop indicator: scale Crosscut ruler indicator: scale Sawblade diameter: 400 mm Speed: 4000 rpm Motor power / saw: 4.4 kW Motor brake: yes / automatic Mill arbor pivoting: yes 0 - 45° Mill arbor height and tilt adjustment: handwheel Mill arbor height and tilt indicator: scale Mill arbor: 30 mm Mill arbor speed: 3000 / 6000 / 7500 / 10000 rpm Max. tool diameter: 180 mm Motor power / milling cutter: 4.4 kW Extraction connection: 100 mm, 100 mm, 80 mm Machine length: 2500 mm Machine width: 1500 mm Weight: 800 kg

Condition: ready for operation (used), Technical characteristics Power and Motors Voltage: 380 V Pluging: Three-phased Overall dimensions Dkjdpetvczxjfx Ac Noh

Condition: ready for operation (used), Technical characteristics Control panel Digital adjustment of spindle, fence and speed Shaft height and motorized fence Speed 1500 to 9000 RPM (variable speed drive) Dsdet Sbqfopfx Ac Nokh Shaft diameter : 50 mm Shaft length : 170 mm Quick tool change (hydraulic) Infeed-outfeed adjustable steel fence Front extension Quick table opening Motorized drive support 4-roller drive (4 speeds) Top-of-the-range machine Ideal for joinery, windows and cabinetmaking Power and Motors Voltage: 400 V Pluging: Three-phased Power: 7,5 Kw Overall dimensions

Condition: ready for operation (used), Technical characteristics En cours de vérification Dkodpfx Aet Splwoc Njh Control panel Digital adjustment of spindle height and speed Shaft height and motorized fence HSK F80 tilting spindle Tilting +30°/45 Speed 1500, 4500, 6000 and 9000 rpm Shaft diameter: 50 mm Shaft length: 160 mm Maximum tool diameter: 220 mm Quick tool change (hydraulic) Infeed/outfeed adjustable steel guide Top-of-the-range machine Ideal for joinery, windows and cabinetmaking Power and Motors Voltage: 400 V Pluging: Three-phased Power: 6 Kw Motor: 7,5 CV Overall dimensions Lenght: 1340 mm Width: 1430 mm Height: 1320 mm Weight: 1300 Kg

Condition: ready for operation (used), Technical characteristics Digital adjustment of shaft height and speed Spindle height and motorized fence HSK F80 tilting spindle Djdpfxjtvcz Ao Ac Nskh Tilting -10° / +45 5.5kW motor Speed 3000, 4500, 6000, 7000 and 10000 rpm Shaft diameter: 50 mm Shaft length: 180 mm Maximum tool diameter : 320 mm Quick tool change (hydraulic) Table dimensions : 1200 x 730 mm Top-of-the-range machine Ideal for joinery, windows and cabinetmaking Power and Motors Voltage: 400 V Pluging: Three-phased Power: 5,5 Kw Motor: 7,5 CV Overall dimensions Lenght: 1400 mm Width: 1150 mm Height: 1100 mm Weight: 900 Kg

Condition: good (used), Table size:1500x1500mm Dsdjfvqmxjpfx Ac Nskh Capacity : 6t Dimension: 1600x2500x2000mm Hydraulic

Condition: repair required (used), functionality: limited functionality, For sale Vecoplan infeed table. Can be used for infeeding up to 3.1meter long woodwaist to chipper feeder. Dodpfsvuk Uiex Ac Nekh

Condition: ready for operation (used), Year of construction: 2026, functionality: fully functional, travel distance X-axis: 2,600 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 200 mm, rapid traverse X-axis: 50 m/min, rapid traverse Y-axis: 50 m/min, rapid traverse Z-axis: 15 m/min, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, - BudgeCraft CNC ROUTER - Best Price-Quality CNC - CNC Router: Wood, Plastic & Aluminum Processing - High Precision (0.01mm) Milling - No Annual License Fees Descriptions: The most complete CNC machine for wood, plastic, and aluminum. Fully servo-driven for the most complex operations. Starting at €34,500. - Take advantage of a fixed price for CadCam software and starter kit. - Assembled in the Netherlands according to the strictest CE standards. - Powerful 9KW ATC spindle and speeds up to 50m/min. - Equipped with automatic tool change magazine for up to 16 tools. - From standard milling jobs to complex projects. - BudgeCraft offers the highest precision and lowest purchase price for professionals. Featured Highlights: * No hidden license fees * CadCam Professional - translates; Image BMP, JPG, TIF, GIF, PNG vector files * Formats: Adobe Illustrator, DXF (AutoCAD), EPS, PLT, TXT * 9kW ATC spindle, air-cooled * Ready to use CNC ROUTER: Precision CNC ROUTER Specifications: Review the technical details of our 0.01mm precision machines. Work Area & Options: From 1300x2600 - 1600x3200 - 2100x3200mm. CE Safety: Why our machines are the safest choice for your workshop. Compliant with the New Machine Guidelines 2026. Full technical specifications available on the Danmar Machines Bv website: X-Axis work area : 2600, 3200mm Y-Axis work area : 1300-1600-2100mm Z-Axis stroke : 200mm Gantry construction : Yes, servomotors Dksdpfxjx Sx Rfo Ac Noh Spindle motor : 9Kw Servomotor (ATC spindle) Speed : 1,000-24,000 RPM X-Axis travel : 50m/min Y-Axis travel : 50m/min Z-Axis travel : 15m/min Holder : ISO30-ER32-ER40 Software : Pegasus PWoodMilling Vacuum pump : included Contact us for more information.

Condition: good (used), Hard cover assembly table The device is fully functional and in very good condition. Dkedpfx Ajvkt N Uec Noh Technical data: Max. binding width 810mm. Power supply: Pneumatic Weight: 140 kg Equipment: – elements for fixing the cardboard – module for wrapping the cover

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, degree of automation: automatic, laser type: fiber laser, laser power: 3,000 W, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Working Area (mm): 3048×1524 X-Axis Travel (mm）: 1524 Y-Axis Travel(mm）: 3048 Z-Axis Travel（mm）: 80 X/Y Axis Positioning Accuracy: ≤0.03mm/m X/Y Axis Repositioning Accuracy: ≤±0.02mm Maximum Synthetic Positioning Speed: 150m/min Maximum Acceleration: 1.2G Dkjdpfsxvwcxox Ac Nsh Cutting Slit Width: 0.1mm-0.5mm (measured for platesless than3mm thick) Cutting Surface Roughness: Ra3.2um-Ra25.4um(measured for plate thickness below3mm） Floor Size(mm): 6000*3000 Mainframe Dimension(mm): 5000*2300*1800 Screen Size: 21"LCD TransmissionMode: Rack andpinion dual drive Table Loading Capacity: 1.1(ton)

Condition: good (used), Rotating table Lazy Susan Perfect for buffering products, bags or trays prior to further handling. This to prevent from overflowing and giving several issues in (automatic) production lines. Height: 80 cm (height is adjustable) Dkjdpetpgxisfx Ac Nsh Diamter: 120 cm

Condition: used, Outfeed table before resaw IDL000793 Dkodpfx Acjul Rgvj Njh

Condition: excellent (used), Year of construction: 2020, - total length: 8,1 m - total width: 1200 mm Dksdpfjtddw Aox Ac Noh - height: 950 mm Hydraulic lift, lifting capacity around 1 ton.

Condition: used, Log table with elevator and log scanner Rema Control Dsdou Smq Sepfx Ac Nskh - logs up to 6 m - between rails 1100/1050/ 1050/1250 mm - log table length: 10 m - Rema Scanner - log infeed conveyor

Condition: ready for operation (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: 14219, travel distance X-axis: 1,250 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 560 mm, spindle diameter: 75 mm, spindle speed (max.): 1,800 rpm, With digital readout of travel distances! TECHNICAL DETAILS X-axis: 1,250 mm Y-axis: 900 mm Z-axis (or W-axis): 560 mm Spindle diameter: 75 mm Spindle speeds: 18–1,800 rpm Dkodpfx Acjyfhghs Njh Table size: 950 mm x 950 mm MACHINE DETAILS Weight: 10,000 kg

Condition: not inspected (used), functionality: unexamined, travel distance X-axis: 1,600 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 1,200 mm, rotational speed (max.): 3,000 rpm, controller model: Heidenhain iTNC 530, The machine underwent a general overhaul in 2011! TECHNICAL DETAILS Travel X-axis: 1,600 mm Travel Y-axis: 1,300 mm Travel Z-axis: 1,200 mm B-axis: 360° Dkjdpfx Aeyfpu Tjc Nsh Speed range: 12 - 3,000 rpm Table size: 1,200 mm x 1,000 mm Maximum table load: 12,000 kg Tool holder: SK 50 Tool positions: 54 MACHINE DETAILS Control: Heidenhain iTNC 530 Drive power: 22 kW

Condition: used, machine/vehicle number: 005796, X axis working area: 3700 mm Y axis working area: 1550 mm Main Electrospindle power: 9 KW Number of controlled axes: 3 axes Total number of drilling spindles: 10 Dsdohwi U Topfx Ac Nskh Total number of tool changer positions: 8

Condition: excellent (used), functionality: fully functional, total length: 800 mm, total width: 4,000 mm, total height: 900 mm, Work table AT 4000 with beech wood top, mobile Stainless steel work table AT 4000 with beech wood worktop undershelf with storage grate left side drawer unit Dimensions: 4000 x 800 x 900 mm (WxDxH) Used machine, cleaned Top sanded & freshly oiled Dkedsyhzl Tspfx Ac Nsh We offer a large selection of work tables!