Used Spin Wheel Shot Blasting Machine for sale (79,451)

Condition: used, Dust separator, dust extractor, suction unit, dust cyclone, used equipment Overall Dimensions: Width: 1200 mm Depth: 600 mm Height: 1560 mm Inlet Size: 90 mm Tjdpfx Aoyzmihsmyja Outlet Size: 115 mm Equipped with a pneumatic valve

Condition: new, Year of construction: 2026, functionality: fully functional, New HC-1500 Suspension Monorail Shot Blasting Machine Description: The HC-1500 suspension monorail shot blasting machine from ABRAZIV Kft. has been developed for the economical surface treatment of cast, forged, and welded parts as well as smaller steel structures. It is ideally suited for descaling, derusting, cleaning, and roughening a wide variety of workpieces. The machine is manufactured to order and can be individually configured according to customer requirements. The HC-1500 features a Y-shaped suspension monorail with two carriers, which enables continuous operation. While one carrier is in the shot blasting process, the second can already be loaded or unloaded. The machine is equipped with three high-performance ABR-400 shot blasting turbines, which are arranged at different angles. This ensures uniform and thorough cleaning of complex workpiece geometries. The internal surfaces of the shot blasting chamber are lined with highly wear-resistant manganese steel in the active shot blasting area. Other areas are protected by wear-resistant rubber, which also reduces noise levels. A closed shot blasting media circuit with a collection hopper, screw conveyor, bucket elevator, air separator, and dosing system ensures reliable and economical operation. A high-performance cartridge filter with a fan is included in the scope of supply for the extraction and filtration of dust generated during the shot blasting process. All functions of the machine are operated via a central control unit. In addition to automatic operation, a manual mode is also available for maintenance work. Technical data Workpiece dimensions Maximum workpiece height: 2,000 mm Maximum workpiece diameter: 1,500 mm Shot blasting turbines Number: 3 Type: ABR-400 Turbine diameter: 400 mm Speed: 2,400 rpm Shot blasting media flow rate: 180 kg/min Tsdpfxszifcgj Amysa Motor power per turbine: 11 kW Suspension monorail Load capacity per carrier: 500 kg Power consumption Machine power: 37 kW Cartridge filter: 7.5 kW Compressed air: 6 bar Compressed air consumption: 8 m³/h Other data Shot blasting media capacity: 1,800 kg Recommended shot blasting media grain size: 0.4–1.2 mm Extraction capacity: 6,000 m³/h Supply voltage: 3 × 400 V Control voltage: 220 V Frequency: 50 Hz Optionally available: Electric hoist Extended suspension monorail Frequency inverter Automatic shot blasting media dosing Special coating Transport Installation Commissioning Operator training Spare parts supply Maintenance and service Application areas The HC-1500 is particularly suitable for: Cast and forged parts Welded structures Small steel structures Mechanical engineering Tank and apparatus construction Job-order shot blasting operations Location / Production Lichtenfels (Germany) / Kecskemét (Hungary) As a manufacturer, we develop and produce our suspension monorail shot blasting machines individually according to customer requirements. In addition to the HC-1500, other sizes and special designs are available. We will be happy to advise you on the design of the appropriate machine and provide you with a non-binding offer. Price on request

Condition: used, Year of construction: 1998, control Siemens Sinumerik grinding wheel diameter 900 mm Tedsxuv Udopfx Amyoa grinding wheel width 20-80 mm In our opinion, the machine is in good condition used condition. Double face side grinders The machine was used for the production of connecting rods. Accessories, tools and clamping devices shown are only part of the scope of delivery if this is noted in the additional information. Changes and errors in the technical data and information as well as Subject to prior sale!

Condition: excellent (used), Year of construction: 2026, center height: 750 mm, total length: 4,200 mm, total height: 2,800 mm, total width: 2,300 mm, overall weight: 13,000 kg, feed length X-axis: 360 mm, feed length Y-axis: 800 mm, power: 28 kW (38.07 HP), Spinning machine LEIFELD - PNC 750 MACH-ID 9651 Make: LEIFELD Type: PNC 750 Control: BECKHOF PAULI Year: 2026 Retrofitted in 2026 New Controller  New SPS - SIEMENS  Main Power 28 kW Steel telescopic covers CE-Safety fence with door    Optional tooling for Parabolic 1200 mm Old owner machined 3 mm aluminum parts  Commisioning, Training, Tool, Installation Possible !! Max. blank / workpiece over bed:1500 Centre height over bed: 750mm Distance between centers: 1225mm Todpfx Amszd Dlvsyea Maximum sheet thickness: 7mm Stroke X-Axis: 360mm Stroke Y-Axis: 800mm Speedrange: 100 - 1000Rpm Power: 28kW Spindle taper head stock: 11DIN / Camlock Stroke pinole quill: 300mm Length: 4200mm Width: 2300mm Height: 2800mm Weight: 13000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2004, WIRE BELT BLAST MACHINE MANUFACTURER: RÖSLER WIRE BELT BLAST MACHINE BRAND: RÖSLER Manufacturer: Rösler Type: RDGE 800-4 Year of manufacture: 2004 Passage width: 800mm Passage height: 550mm Spinning wheel: 4 pieces with frequency converter, Filter system: wet filter system With several inlet and outlet belts. Incl., control cabinet, complete documentation, etc. TOP condition! System is dismantled! WIRE BELT BLAST MACHINE BRAND : RÖSLER Brand: Rösler Type: RDGE 800-4 Year: 2004 Belt Width : 800mm Inlethigh: 550mm Turbine: 4 Pieces with Drivers Filter: Wet Filter With many inlet- and outlet transport belt Incld. Main Panel, complete Doku Very good condition! Machine it s now desmantly Price: Loading on Truck Price: Loading on Truck Warranty: 6-month function and warranty guarantee when commissioned by DECK Sarl. Spare parts supply for the next 10 years Warranty: 6-month Functions- and warranty from DECK Sarl. When DECK Sarl. make the assembly OPTIONAL: Delivery to your factory: Tedpfx Ajv Idf Ismyea Assembly / commissioning / training Assembly by foreman We also offer spare parts for Rösler, Schlick, Wheelabrator, Gietart etc. blasting machines! We can offert for spare parts for Rösler, Shot Blasting Machines!

Condition: good (used), Loypack One shot chocolate depositor Tjdpfx Amomqm E Usyja Stainless one shot moulding machine, 100Kg twin hopper, moulds are loaded into a denester, adjustable temp control, variable speed, heated water tank, comes with over 300 different moulds for making neopolitans, 3Ph

Condition: good (used), Loypack One shot chocolate depositor Stainless one shot moulding machine, 100Kg twin hopper, moulds are loaded into a denester, adjustable temp control, variable speed, heated water tank, comes with over 300 different moulds for making neopolitans, 3Ph Tsdpomqm E Rjfx Amysa

Condition: used, Year of construction: 1998, Technical details: height of profile: 180 mm max. dia. of grinding wheel: 200 / Topfscheibe mm grinding wheel hole diameter: k.A. grinding spindle speed: 2800 U/min Table dimensions: LxB: 500 x 160mm mm Todou Ngrqepfx Amyoa voltage: 220 / 380 V total power requirement: 3,0 kW weight of the machine ca.: 0,57 t dimension machine xH: 1,28 x 1,0 x 1,75 m Application for face grinding Magnet mount: LxW = 680 x 200mm; tilt approx. 15°; swivel 360° via radial scale magnet: Type S2D; permanent magnet, clamping surface 300 x 150mm. Grinding wheel support: -adjustment vertical = length 180mm manual; swivel = approx. 45° right/left manual. Operation via control panel on machine. Coolant tank with pump and feed *

Year of construction: 2010, condition: used, Technical details: range of revolution per miute: 180 U/min voltage: 220/ 50 V/Hz machine weight approx.: 150 kg dimension machine xH: 1,2 x 0,8 x 1,3 m total power requirement: 550 kW Car tire balancing machine The balancing process is automatic with wheel braking. Program selection can be chosen between 11 balancing methods. Microprocessor controlled LED display with digital weight display. Center hole of rim Ø 40 - 154mm Shafts Ø 36mm Measuring speed 120 rpm. Measuring time 5 - 10 sec. Cone sizes: Ø 44 - 63mm; Ø 61 - 79mm; Ø 77 - 114mm; Ø 107 - 154mm Wheel dimension: Rim width: 1,5" - 18" RimØ max. 10" - 24" Wheel Ø max. 890mm Wheel weight max. 65kg Tedpfju Ic Aiox Amyoa *

Condition: used, Year of construction: 1980, machine/vehicle number: 46.60, workpiece length:310 mm work piece width:150 mm Tsdpfocxxlrex Amyja workpiece height:210 mm spindle speed max.:2800 U/min distance grinding wheel - table:280 mm magnetic clamping plate: magnetic:300 x 150 x 70 mm spindle throat:250 mm Column-Diameter:130 mm total power requirement:1,9 kW weight of the machine ca.:0,58 t dimensions of the machine ca.:0,62 x 0,72 x 1,80 m

Condition: reconditioned (used), Year of construction: 2012, operating hours: 1,785 h, functionality: fully functional, overall weight: 65 kg, Very well-maintained dry ice blasting machine from Cold Jet. Fully functional and tested. Year of manufacture 2012, including nozzles. Regular maintenance carried out. Can only be used with dry ice blocks! Tsdpoyzqy Dsfx Amyoa

Condition: used, Used automatic shot blasting machine from KF Strahltechnik for sale. The machine is designed for the automatic shot blasting of profiles, sheet metal, and steel structures. The four blast wheels/turbines make the machine suitable for efficient processing of the top and bottom surfaces of workpieces. The machine is in good condition and is currently in operation. An inspection and test run at our facility are possible by arrangement. Tsdpfjkw Ukuex Amyea Technical data: Manufacturer: KF Strahltechnik Machine type: Automatic shot blasting machine Number of turbines: 4 Maximum workpiece width: 800 mm Maximum workpiece height: 400 mm Suitable for: Profiles, sheet metal parts, steel structures, and similar workpieces Processing: Shot blasting of the top and bottom surfaces Roller conveyor at the front: approx. 6 m Roller conveyor at the rear: approx. 6 m Condition: Good, currently in operation Inspection: Possible at the facility Test run: Possible by arrangement Delivery and sales conditions The stated price is the ex-works price for direct collection. Dismantling, loading, transport, and installation/commissioning at the new location are not included in the price and can be offered separately if required. The machine is sold used and in its current condition. An inspection and examination before purchase is expressly possible. ✅ Automatic shot blasting machine from KF Strahltechnik ✅ 4 turbines/blast wheels ✅ For profiles and sheet metal parts up to 800 x 400 mm ✅ Roller conveyors at the front and rear, each approx. 6 m ✅ Currently in operation and in good condition ✅ Inspection and test run possible at the facility ✅ Price ex-works, dismantling and installation optionally available at an extra charge

Condition: used, Reading type / 0 weight - pallet system / kg Todpfxsy Sur Es Amyea length / mm

Condition: as good as new (ex-display), Year of construction: 2025, functionality: fully functional, Demo unit. Can be viewed and tested in our showroom. Self-collection or delivery available (plus transport costs). Equipped with integrated heating. Key Features: - Professional cleaning in a closed cycle using water, blasting media, and cleaning agent - Suitable for very wide wheels (up to 360 mm width) - Narrow wheels are stabilized by a pneumatic wheel support to prevent tipping - 50°C water temperature thanks to built-in heater for improved cleaning performance - After the wash cycle, wheels are blown off with compressed air - Automatic, environmentally friendly wheel washing machine - Minimal water consumption - Time savings due to automatic washing process - Robust stainless steel casing - Programmable water heating - Double noise insulation - Washing chamber and pump sump - Compartment for drive and controls Technical Specifications: Dimensions (W x D x H): 960 x 1,220 x 1,450 mm Weight (empty): 290 kg Tedpfox Hgb Uex Amyea Water volume: 300 l Blasting media capacity: 25 kg Rated output (motor and drive): 6 kW Heating capacity: up to 50°C with 4 kW Wheel diameter: 560 – 800 mm Wheel width: 135 – 360 mm Max. wheel weight: 60 kg Washing program durations: 40 / 60 / 120 seconds Heating time: 60 – 120 min Water temperature: 50°C Working media quantity: 20 kg Pump capacity: 600 L / min Electrical connection: 230/400 V, 50 Hz, 6 kW Recommended fuse: 25 A (32 A CEE plug) Min. operating pressure: 4 bar Max. operating pressure: 10 bar Noise level: 89.5 dB (A) Scope of delivery: 1x 360 HP wheel washing machine 1x Blasting media 25 kg 1x Blasting media basket 1x Rubber mat 1x Sound insulation foam 1x 30 liters washing fluid 1x Perforated PVD noise reduction filter

Condition: good (used), Year of construction: 1980, Spinning machine Tedpfjx Ttplex Amyea LEIFELD Spinning moulds

Condition: good (used), Year of construction: 1980, center width: 2,350 mm, center height: 1,200 mm, product height (max.): 6 mm, Manufacturer: LEIFELD Type: PLB 1200 Year of construction: 1980 Specifications: Metric Metric US Standard Max. Product over bed 1200 Max. Product in the pit 2260 Ø Tjdpfjq Dqdijx Amyea Center height above the bed 600 mm Distance between the centers 2350 mm Length of the gap 400 mm Max. Sheet thickness 6 mm Stroke X-Axis 1200 mm Stroke Y-axis 300 mm rotational speed 6 - 675 rpm Power output 40 kW Tailstock quill 750 mm Dimensions (estimate) length 4500 mm width 3200 mm height 2500 mm weight 10200 kg Please note: The information on this page is given in good faith and to the best of our knowledge and belief, and where possible obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: good (used), Year of construction: 1970, center width: 2,350 mm, center height: 2,400 mm, Max. blank / workpiece over bed:2400 Centre height over bed: 1200mm Distance between centers: 2350mm Length of the gap: 400mm Maximum sheet thickness: 6mm Stroke X-Axis: 1200mm Stroke Y-Axis: 300mm Speedrange: 6 - 675Rpm Tjdextaxwopfx Amyea Power: 40kW Stroke pinole quill: 1200mm Length: 4500mm Width: 3200mm Height: 2500mm Weight: 10200kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: like new (used), Year of construction: 2022, operating hours: 10 h, functionality: fully functional, compressed air connection: 16 bar, total width: 387 mm, total length: 565 mm, total height: 1,007 mm, overall weight: 75 kg, pressure: 16 bar, operating pressure: 8 bar, noise level: 120 dB, hose package length: 7,000 mm, High-performance dry ice blasting system IC 310 S with integrated dry ice mill IS 10 (built-in fully automatic crushing device) for delicate cleaning using micro-particles up to aggressive blasting on demanding surfaces. The patented dry ice mill IS 10 allows you to reduce 3 mm dry ice pellets to 1.5 mm micro-pellets as needed, enabling you to clean even sensitive surfaces, such as polished surfaces, pneumatic and electrical lines, machine panels, or vehicle interiors. The patented, continuously adjustable dosing system operates reliably without any loss of compressed air. The working pressure ranges from 1 to 16 bar. The compressed air supply hose is 10 m long. The integrated flow system prevents freezing and subsequent clogging at the hopper outlet. The design of the tube and hose system prevents the pellets from breaking. The blasting gun is ergonomically shaped, robust, safe, and easy to use. An optional LED lamp is available for the blasting gun. The stainless steel frame and machine housing guarantee a long service life. The machine requires only minimal maintenance costs, even under the most demanding operating conditions. The stainless steel hopper has a capacity of 13 kg. The dry ice consumption is between 10 and 100 kg/h. Included accessories: - Round spray nozzle RN-10-08 - Flex Case II Plus nozzle case (14-piece) - External Module PAM-01 (7m hose extension) - M306 protective helmet (with comfort face shield) Tjdpowum Svofx Amysa - Capsule hearing protection with helmet adapter - Length-adjustable air hose - Compressed air regulator with belt - 10m breathing air supply hose - Breathing air preparation unit - Ice scoop

Condition: used, Year of construction: 1995, Technical details: grinding height: -- mm grinding width: 220 mm grinding wheel diameter: 762 mm total power requirement: 90 kW weight of the machine ca.: 13 t grinding spindle 1 drive:: 37 kW Tedpswi Nh Nsfx Amyja grinding spindle 2 drive:: 37 kW Grinding machine for pre-grinding the connecting rod With 2 replacement spindle motors *

Condition: excellent (used), Year of construction: 2009, operating hours: 5,280 h, functionality: fully functional, We offer a table-type shot blasting machine – STEM with a table diameter of 1400 mm. The machine is in very good condition and ready for immediate use. The shot blasting machine has two rotating tables and two turbines, each with a power consumption of 5.5 kW. The designed shot blasting unit is manufactured for semi-automatic shot blasting of the external surface of parts placed on a rotating table. The machine is equipped with two rotating tables. Rotating table diameter – 1400 mm Maximum product height – 600 mm Type: 14x6/2S/2WX1M Year of manufacture: 2009 Number of operating hours – 5275 Commissioning date: 03/31/2009 Machine weight: 5000 kg Machine length: 3540 mm Machine height: 5540 mm Machine width: 6600 mm Total power consumption: 20 kW Operating range Blasting wheel, number and type: 2 WX1M External diameter of blasting wheel: 330 mm Blasting wheel speed: 2900 rpm Amount of abrasive material thrown per turbine: 80-90 kg/min Amount of abrasive material for initial filling: 500 kg Rotating table diameter: 1400 mm Rotating table speed: 2 rpm Spindle diameter in the front bearing: 105 mm Maximum torque on the spindle: 2500 Nm Distance from the spindle axis to the clamping surface of the table: 60-560 mm Tedpfx Amey Uc Iaoyea Maximum workpiece weight: 1500 kg

Condition: good (used), Year of construction: 1993, with oil filtration unit Unfortunately, we do not have any further technical data available. Todey H H Hqopfx Amyoa Transport and loading can be organised throughout Europe at an additional cost upon request. Prices are subject to VAT. Inspection is possible by appointment. Please contact us—our team will be happy to assist you. Machinery Purchasing / Sales PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES, MACHINE TOOLS, ETC. Do you need a high-quality yet affordable machine for your manufacturing shop? Or are you looking to sell your equipment? For further information or contact options, please use the contact form.

Condition: used, Year of construction: 2000, functionality: not functional, CLEARANCE SALE WILL BE SOLD TO HIGHEST BIDDER ON 'FIRST COME - FIRST SERVE BASIS' ; IMMEDIATE SHIPPING POSSIBLE LIST OF OTHER MACHINES FROM SAME MILL AVAILBLE UPON REQUEST Tedpfey Splgjx Amysa BARMAG EXTRUSION SPINNING LINE WITH 12 POSITION , 72 SPINNING ENDS FOR PET POY MICROFILAMENT YARN , evospeed • MANUFACTURER : BARMAG , GERMANY • AGE : INSTALLED IN 1998/ 9, STARTED UP IN 2000 ! BUT ONLY USED FOR 3-4 YEARS, THEREAFTER MAINTAINED & KEPT MOTHBALLED - 12 WINDERS, BARMAG CW6-1200/6 , 6 ENDS PER CHUCK 1 EXTRUDER BARMAG 12 E 8 • SPIN BEAM INCLUDING SPIN PACKS & SPIN PUMPS 3,5 CC/U • SPINNERETTES 100MM DIA, BOTTOM LOADED, DESIGNED FOR HIGH COUNTS MICRO & SUPERMICRO • POLYMER MANIFOLD EXTRUDER TO SPIN BEAM • DOWTHERM MANIFOLD FOR SPINBEAM AND POLYMER MANIFOLD • QUENCH SYSTEM INCLUDING FINISH SYSTEM, SPINFINISH JETS BY 'KYOCERA' • WITH CONVENTIONAL QUENCHING CABINETS + EVOSEPEED & RADIAL TYPE • TAKE UP UNITS, INCLUDING: • TAKE UP SECTIONS / PLATFORMS / LADDERS • COLD GODETS, ONE PAIR PER POSITION • INTERLACE SYSTEM WITH HEBERLINE INTERMINGLING JETS • YARN SUCTION SYSTEM • 12 WINDERS, BARMAG CW6-1200/6 , 6 ENDS PER CHUCK • + ONE SPARE WINDER

Year of construction: 2007, condition: ready for operation (used), A CNC precision grinding machine Peter Wolters with two opposing grinding wheels and a workpiece/carrier disc system for simultaneous machining of both workpiece sides is available. Carrier wheel outer diameter: 1050mm, carrier wheel ring diameter: 290mm, max. workpiece height: 100mm, machine dimensions X/Y/Z: approx. 2350mm/3400mm/2400mm, weight: approx. 7000kg, control: Siemens Simatic S7-400 with WinCC visualization, operating hours: approx. 7000h. Including twin loader, buffer table, CBN fine grinding wheels, dressing wheels, ultra-fine measuring system, temperature monitoring, remote maintenance system, wear compensation and alignment system. Without filter system and cooling system. Documentation available. An on-site inspection is possible. Todjy R Drlspfx Amysa

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 020616/P, total width: 70 mm, total length: 90 mm, total height: 180 mm, pressure: 8 bar, operating pressure: 8 bar, input voltage: 230 V, Equipment: cabin, For sale: METAL FINISHING water blasting machine - Type – waterblast 800 - Model – WBL 001 - Serial No. – 020616/P - Year: 2008 The machine has seen minimal use and has been regularly maintained. It is highly practical and extremely efficient. Its key advantage is that with high water pressure—containing abrasive media—it impacts the metal surface, achieving excellent results. The main benefit of the water blasting method is that the water and abrasives circulate continuously, returning to the tank. This means there is no dust, no abrasive particles released into the environment, and the work area remains clean at all times. Todey Rz Abspfx Amyja The machine is connected to the mains supply and ready for immediate operation.

Year of construction: 2024, condition: new, Work area Todpfx Ash Hxubsmysa 1100 x 660 x 816 mm (W x D x H) Blasting chamber Dust-tight, negatively pressurized chamber in a robust steel sheet construction Work gloves Special rubber, abrasion-resistant, cotton lining, firmly connected to the chamber to prevent dust leakage Doors Blasting chamber W x D x H = 1100 x 660 x 816 mm Two side doors, dust-tight sealing, double-walled, sound-absorbing foam filling, lockable, with electrical shut-off protection Abrasive recovery Via a coordinated MHG recovery system Operation ON/OFF switch for extraction and lighting, pressure regulator, pressure gauge, and foot switch Viewing windows