Used Shredding for sale (789)

Condition: used, Year of construction: 2021, operating hours: 3,300 h, functionality: fully functional, Basic Package AK 640 SA Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm Semi-trailer chassis with 3 axles, road approval for 80 km/h Brake system incl. ABS and lighting according to EU directive Tyres 385/65 R22.5 Permissible total weight 32,000 kg Hydraulically adjustable support legs Splash protection (internal and lateral mudguards) Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm, complies with EUROMOT V emission standard Additional hydraulic connection 20 l/min Load-dependent control of material feed incl. automatic scraper floor reversal Separate drive for feed roller and scraper floor (twin drive) Fuel tank 2 x 450 litres Feed roller: length 1,690 mm, diameter 510 mm, with attached tooth segments Four-row flail drum with 36 free-swinging cast steel flail holders and replaceable flail tips Standard: Flail tip "Streusel plus" Impact plate with teeth Centrally positioned wear strips Electric pump for actuating cylinder functions (e.g., raising/lowering support legs and opening/closing rear hopper, folding/unfolding rear conveyor, releasing drive system) when the engine is off 24 V electrical control Separate control box at rear of machine Hydraulically foldable fine shredding basket Multimesh (mesh size from 30 to 280 mm, gradations upon request) incl. one-piece rear flap Rear conveyor: belt length 7,500 mm, belt width 1,500 mm, discharge height 5,200 mm, hydraulically foldable and lowerable from 39° to 30°, incl. anti-magnetic central section Under belt: belt length 3,800 mm, belt width 1,400 mm Moistening device for external water connection Scraper floor with 71 slats Wear protection in the drum section Reinforcement plates on the infeed hopper (wear-resistant steel) on both sides for side wall Complete radio remote control Fire extinguisher Acoustic start-up warning Doppstadt telematics system Paintwork: RAL 2011 deep orange Additional Equipment: Hydraulic drive Scraper floor chain lubrication NEODYM overband magnet Frame for overband magnet Central lubrication Engine compartment protective plate Gbsdpfxexx Tigj An Rjl Lighting package: engine compartment and rear conveyor Watering system Delivery date to be arranged Available from 06/2026

Condition: used, Year of construction: 2022, operating hours: 3,000 h, functionality: fully functional, Basic package Inventhor 6: Load-sensing system Fuel tank 500 liters Longitudinal conveyor: belt length 2,900 mm, belt width 800 mm Centrally positioned wear/slide strips 24-V electric control system – additional electric pump enables the following functions with engine off: raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper Complete radio remote control Large side GRP maintenance doors Service-friendly engine compartment Gsdpexx N T Ijfx An Rjbl LED lighting package: engine compartment and rear Hydraulically reversible fan wheel Three-sided load protection Folding hopper Fire extinguisher Maintenance ladder Toolbox Acoustic start-up warning Doppstadt telematics system Painting: RAL2011 deep orange Optional equipment: Driveline 310 kW – EV 3-axle drawbar chassis unit Shredding system Size L-C3 600/4-30Z Size L limiter Auxiliary hydraulic connections 35 – 80 l/min Hydrostatic drive Hopper extension 350 mm, left-side watering Rear conveyor 7 m Overband magnet Neodymium Frame for 7 m overband magnet Central lubrication system Custom paint finish in RAL Delivery date to be arranged

Condition: used, Year of construction: 2022, operating hours: 1,150 h, functionality: fully functional, Basic package Inventhor 6: - Load-sensing system - Fuel tank 500 liters - Longitudinal conveyor: belt length 2,900 mm, belt width 800 mm - Centrally arranged wear strips - 24V electrical control system – additional electric pump for actuating the following functions when the engine is off: - Raise/lower/fold rear conveyor, open/close comb flap, open/close comb, raise/lower folding hopper - Complete radio remote control - Large side GRP service doors - Maintenance-friendly engine compartment - LED lighting package: engine compartment and rear - Hydraulically reversible fan - Three-sided loading protection - Folding hopper - Fire extinguisher - Maintenance ladder - Toolbox - Acoustic start-up warning - Doppstadt telematics system - Paint finish: RAL2011 deep orange Additional equipment: - Driveline 260 kW – EV - 2-axle semi-trailer chassis unit - Size L shredding system – 20 teeth - Size L limiter - Additional hydraulic ports 35–80 l/min - Hydraulic travel drive - Hopper extension 350 mm, watering system both sides - Hopper wedge Size L with NM brush Godpfxexx N Dgs An Robl - Rear conveyor 7 m - Overband magnet neodymium - Frame for 7 m overband magnet Delivery date by arrangement

Condition: new, Year of construction: 2026, The MT-1000 washer with shredder is a device designed for efficient washing and shredding of fruits and vegetables prior to further processing. An elevator conveys the produce toward the grinder; during this transport, the fruits are washed using flat-spray nozzles. Technical data: Capacity: 1500 kg/h Installed power: 3.5 kW Belt speed: adjustable Washing nozzles: yes Conveyor belt speed: 250 mm Gjdsukpnvopfx An Rebl Shredder power: 3 kW Side-channel blower: optional Water pump generating the water jet: optional Dimensions L × W × H (mm): 2600 × 680 × 2150 Construction material: AISI 304 stainless steel

Condition: new, Year of construction: 2026, The ideal machine for shredding softwood. Motor: 11/15 kW; 400 V - 50 Hz - 3 ph, Rotor diameter: 260 mm, Gbjdpfx Anjwzarcs Rel Hydraulically actuated pusher Screen perforation to choice (12 - 40 mm) Extraction port Ø 160 mm Weight approx. 1,100 kg Dimensions (LxWxH) approx. 1805 x 1118 x 1650 mm Colour: blue / grey Requirements for raw material: - Moisture content (atro) must be below 30% - Metal and mineral contaminants such as sand, stones, etc. lead to increased wear. We are pleased to offer a free test with your material. You are welcome to visit us in Neckartailfingen for this purpose. Alternatively, you can send us your material by freight and we will document the test with photos and videos.

Condition: new, Year of construction: 2026, Your advantages: + extremely large cutting unit opening with 1300x1200mm + special rotor suitable for hardwood and softwood + Energy-efficient and powerful with 37 kW at start-up Technical specifications: Colour: grey / blue Feed opening (mm): 1,300 x 1,200 Hopper capacity (cbm): 1.6 m³ Rotor diameter (mm): 368 Rotor speed (rpm): 65 - 125 Power requirement (kW): 37 Screen perforation (mm): 30 - 50 mm - selectable Tools: 37/70 knives Extraction nozzle Ø (mm): 200 mm Dimensions: 2430x2410x1735 mm (lxwxh) Weight (approx. Kg): 3,920 Optional for a surcharge: * to shred veneer or paper (anything thinner than 3 mm) - we recommend a segment floor. The machine in preproduction has not yet installed this. Special option at an additional cost. - 2nd row of knives, for up to 30% more throughput - Fast hydraulics, for increased throughput Gbedpfx Anogbkkrs Rel - Preparation for conveyor belt removal - conveyor belt - HAWK-EYE overbelt magnet --- Optimal pallet size with the option slide extension = 1200x1400 (option slide extension, the cutting unit opening 1300x1700 surcharge + 12,975.00) * is associated with significantly longer production time. * larger machines on request --- Requirements for the raw material: - The moisture content (atro) must be below 30% - The loading must be free of metals and mineral impurities. This can result in damage to the tools and / or increased wear

Condition: new, Year of construction: 2026, Belts and Accessories We offer top-quality conveyor belts suitable for all common screening machines and shredders. Custom-made to your specifications, we guarantee reliable performance and long service life. Suitable for Screening Machines - Doppstadt SM 518 / SM 618 / SM 620 / SM 720 - Terra Select T4 – T7 - Komptech Max - Mustang and other models Suitable for Shredders - Doppstadt Bison / Buffalo / Mammoth, Biopower, Inventhor - AK 430 / 510 / 635 - and other popular models Technical Features & Versions - Length: unlimited, tailored to customer requirements - Width: up to 1,800 mm - Number of plies: 2, 3, or 4 as required - Various profiles for optimal conveying performance Gbedpfx Ajyg D S Nen Rjl - Steel cord quantity: 10 cm / 35 ±1 - Various material thicknesses available Your Advantages - Custom manufacturing according to your specifications - Superior quality for maximum service life - Short delivery times for rapid availability - Reliable performance for all common machines Contact us for a tailored quote and advice on conveyor belts for your application.

Year of construction: 2011, condition: good (used), Shredder system, single-shaft shredder, shredder, chipper, cutting mill, single-shaft crusher, rotor mill Gedpfxeh Di H Ds An Rjbl -Shredder system: completely made of stainless steel, for frozen meat or other -Motor power: 4 kW -Speed: approx. 60 rpm -Number of cutting knives: 10 pieces -Dimensions cutting blade: 250 mm -Filling spout 500 x 895 x H480 mm -Dimension 880/1390/H2060 mm -Weight 640 kg

Condition: new, Year of construction: 2026, Shafts for shredders: Arjes, Terex, Pronar, Lindner, Eggersmann, Olnova, Komplet, Doppstadt Types – 750, 800, 850, U75, TDS820, Model 75, 2000 and more! - Standard shafts - Special shafts - Customer-designed shafts - Spare parts - Knives Concrete / Paddle / Star / Metal / Electro and many more! Gsdjycxvhepfx An Rjbl

Condition: new, Year of construction: 2026, functionality: fully functional, Shafts for Shredders: Arjes, Terex, Eggersmann, Olnova, Pronar, Komplet, Doppstadt Arjes Impaktor 250/350, Arjes Compactor 300, Terex TDS 815, Terex Caiman 150, Terex Greentec LS2, Komplet Krokodile, Olnova model 5, Doppstadt Core Shredd 250, Eggersmann Impaktor 250 - Standard shafts - Special shafts - Customer-designed shafts - Spare parts - Knives Gbsdpfx Anoychwzs Rol Concrete / Paddle / Star / Metal / Electro and many more!

Year of construction: 2026, condition: new, The MT-2000 washer with shredder is a device designed for effective washing and shredding of fruits and vegetables prior to further processing. An elevator transports the produce toward the grinder; during this transport, the fruits are washed using flat-spray nozzles. Technical data Capacity: 2000-2500 kg/h Installed power: 4.5 kW Belt speed: adjustable Washing nozzles: yes Conveyor belt speed: 350 mm Shredder power: 4 kW Side-channel blower: optional Water pump generating the water jet: optional Dimensions L×W×H (mm): 2970 × 920 × 2150 Gbjdpfx Ansfgir De Rol Construction material: AISI 304 stainless steel

Condition: refurbished (used), Year of construction: 2019, operating hours: 3,922 h, Doppstadt Inventhor Type 9 Engine Type: Diesel engine Make: MTU 6R 1300 Emission Standard: Stage V / EUROMOT III A Rated Power: 390 kW / 530 HP Fuel Capacity: 1,000 l Discharge Conveyor Width: 1,200 mm Length: 8,500 mm Belt Speed: 2.0 m/s Discharge Height: 5,050 mm Feed Hopper Loading Height: 3,307 mm Drum Number of Drums: 1 Drum Length: 3,000 mm Drum Diameter: 600 mm Drum Speed: -5 – 32 rpm Number of Tools (inserts): approx. 42 MACHINE DETAILS Total Weight: 33,000 kg Length: 16,786 mm Width: 2,500 mm Height: 5,050 mm Transport Width: 2,500 mm Transport Height: 3,893 mm Transport Length: 9,973 mm Operating Hours: 4,724 h EQUIPMENT - Additional equipment: Overband magnet - New stepless drive concept with VarioDirect Drive - No engine load caused by start-up torque thanks to load-free drum positioning - Self-cleaning function for the wrapping unit - Flexible shredding concept with various application packages - New door and housing design for improved maintenance access Gbjdpfx Aoxcx Snjn Rsl - Quick fold-out conveyor system at the push of a button - State-of-the-art monitoring concept - Reduced noise emissions Machine has been overhauled and is immediately available!!!!!

Condition: new, Year of construction: 2025, Economical solutions with short delivery times Conveyor belts suitable for all common screening machines such as Doppstadt SM518 / SM618 / SM620 / SM720 / Terra Select T4-T7, Komptech Max, Mustang and others Gedpoxmvplsfx An Rebl Conveyor belts suitable for all common shredders such as Doppstadt Bison / Büffel / Mamut, Biopower, AK 430, AK 235, AK 635 and others Manufactured according to your specifications: - Unlimited length - Width up to 1800 mm - 2, 3, or 4 material layers - Various profiles - Steel wire quantity: 10cm/ 35 +/-1 - in various material thicknesses Conveyor belts of the highest quality

Condition: reconditioned (used), Year of construction: 2018, operating hours: 6,070 h, Jenz BA 965 DL Titan - Year of manufacture: 2018 - Operating hours: 6,070 Gjdexmvn Ispfx An Rjbl - Engine: Mercedes MTU, 630 HP - AdBlue - Remote control - Hydraulic drive (self-propelled) - Weight: 25,000 kg Machine has been workshop overhauled and is immediately available.

Condition: new, Year of construction: 2025, The 3E Machinery tire recycling system is a state-of-the-art, modular industrial line engineered for the efficient processing of used passenger, truck, and industrial tires into clean fractions such as rubber granules, steel, and textile fibers. This installation provides high throughput, low energy consumption, and full compliance with environmental protection standards. Comprehensive Tire Processing Technology • The system comprises several processing stages that guarantee complete material downsizing and separation: • Pre-cutting and primary shredding of whole tires • Multi-stage size reduction with dual-shaft and four-shaft shredders • Granulation and fine milling of rubber • Magnetic separation of steel • Air and cyclone separation of textile fibers • Final purification and classification of rubber granulate This process enables the production of high-quality rubber granules in various sizes (from 30 mm down to 1–4 mm), as well as clean steel suitable for recycling. System Throughput and Application Range • Throughput: from 500 kg/h to over 10,000 kg/h • Material types: passenger car tires, truck tires, industrial tires, solid tires, bead-reinforced tires • Final output products: o rubber granules (30 mm, 10 mm, 1–4 mm) o rubber powder o steel o textile fibers • Optional low-noise and low-dust engineering packages available Gbsdpfx Aox Aidbon Rsl The layout can be customized to match the client's required capacity and available plant space. Why partner with our company – Official European Representative of 3E Machinery • Competitive pricing without intermediary markups. We offer equipment directly from the factory in China, without additional distributor or agent margins, ensuring highly competitive pricing while maintaining full manufacturer quality. • Comprehensive technical and commercial support. Based on client specifications, we select the appropriate line configuration, define process parameters, capacity, and technology scope—ensuring a perfect match for each project. • Full assistance throughout the entire procurement cycle. We support customers from the initial inquiry, through technical discussions, payment terms, and to the conclusion of the final agreement with the manufacturer. • Logistics and transportation support. We assist with organizing international transport, customs clearance, and required documentation so delivery proceeds smoothly and without complications. • Extensive experience in the recycling industry. As a long-standing European representative of 3E Machinery, we provide practical know-how and market expertise that greatly simplifies the purchasing process.

Condition: new, Year of construction: 2025, COMPLETE SHREDDING LINE!!! we have this line in stock, ready for sale!! -loading conveyor to shredder WT -single shaft shredder with hydraulic pusher WT3080 30kW, rotor length 800mm -unloading conveyor from WT and loading to knives mill PC -knives mill PC42100R 45kW, rotor length 1000mm Gsdpfx Anjv I T Eko Rebl -blower with 5.5kW motor -big-bag station for two bags

Condition: new, Year of construction: 2025, COMPLETE SHREDDING LINE!!! we have this line in stock, ready for sale!!! -loading conveyor to shredder WT -single shaft shredder with hydraulic pusher WT3080 30kW, rotor length 800mm -unloading conveyor from WT and loading to knives mill PC -knives mill PC42100R 45kW, rotor length 1000mm -blower with 5.5kW motor -big-bag station for two bags Gbedpfsv I T Dyex An Rsl

Condition: new, Year of construction: 2025, COMPLETE SHREDDING LINE!!! Gjdpfxjv I T E De An Rebl -loading conveyor to shredder WT -single shaft shredder with hydraulic pusher WT3080 30Kw, rotor length 800mm -unloading conveyor from WT and loading to knives mill PC -knives mill PC42100R 45kW, rotor length 1000mm -blower with 5.5kW motor -big bag station for two bags

Condition: excellent (used), Year of construction: 2023, operating hours: 119 h, functionality: fully functional, conveyor belt length: 7,000 mm, conveyor belt speed: 50 mm/s, conveyor belt width: 1,000 mm, filling opening width: 3,374 mm, Doppstadt Inventhor 6 with only 119 operating hours! TECHNICAL DETAILS Shredding system Type: Size L Number of roller teeth: 20 Feed hopper Loading height: 3,650 mm Feed width: 3,374 mm Rear discharge conveyor Width: 1,000 mm Length: 7,000 mm Discharge height: 4,209 mm Conveyor speed: 1.25 – 3.0 m/s MACHINE DETAILS Transport dimensions (L x W x H): 9,141 mm x 2,540 mm x 3,604 mm Permissible total weight: 25,000 kg Drive Engine type: Diesel-hydraulic Brand: MTU 6R1000 Rated power: 260 kW (353 hp) Emission standard: STAGE V Fuel tank capacity: 500 l Operating hours: 119 h EQUIPMENT Basic Inventhor Type 6 package Load-sensing system Longitudinal conveyor (conveyor length: 2,900 mm, conveyor width: 800 mm) Centrally arranged lubrication bars 24 V electric control system Full radio remote control Large side maintenance doors (GRP) Service-friendly engine compartment LED lighting package for engine compartment and rear Hydraulically reversible cooling fan Three-sided loading protection Folding hopper Fire extinguisher Maintenance ladder Toolbox Acoustic start-up warning Doppstadt telematics system Size L limiter Auxiliary hydraulic connection 35 - 80 l/min Gjdpfxoxln Rle An Rebl Hydrostatic drive Hopper extension 350 mm, bilateral water spray Overband magnet (neodymium) Frame for 7 m overband magnet

Condition: excellent (used), Year of construction: 2021, operating hours: 1,345 h, functionality: fully functional, machine/vehicle number: 40, transport width: 2,545 mm, transport length: 8,627 mm, transport height: 2,735 mm, power: 205 kW (278.72 HP), rotor diameter: 800 mm, rotational speed (max.): 33 rpm, Doppstadt Methor DW 126 K TECHNICAL DETAILS Chassis: tracked undercarriage Drive Engine type: diesel-hydraulic Brand: Caterpillar C7.1 Rated power: 205 kW (278 hp) Emission standard: Stage V Tank capacity: 300 l Shredding System Type: Size M Number of roller teeth: 26 Diameter: 800 mm Rotational speed: 33 rpm Tooth height: 100 mm Feed Hopper Loading height: 3,124 mm Discharge Conveyor Width: 1,000 mm Length: 6,900 mm Discharge height: 4,184 mm Conveyor speed: 1 - 4 m/s MACHINE DETAILS Operating hours: 1,345 h Total weight: 15,400 kg Working Position Length: 11,293 mm Width: 2,545 mm Height: 4,184 mm Transport Dimensions Length: 7,820 mm Width: 2,545 mm Height: 3,231 mm EQUIPMENT - Base Methor track package - Tracked undercarriage including 2 travel speeds - 400 mm triple grouser track chain - Auxiliary hydraulic connection, 70 l/min - 24 V electric control Gedpfx Anew Ew E Uj Rebl - Large complete radio remote control - Maintenance-friendly engine compartment with LED light - Folding hopper with position sensor and automatic control - Hydraulically reversible cooling fan - Acoustic start-up warning - Paintwork: RAL 2011 deep orange - Water spraying system - Quick-change system for roller at the roller - Quick-change system for roller at the machine - Frame for overband magnet - Overband magnet

Condition: ready for operation (used), Year of construction: 2021, operating hours: 506 h, functionality: fully functional, machine/vehicle number: 42, conveyor belt length: 6,900 mm, conveyor belt speed: 4,000 mm/s, conveyor belt width: 1,000 mm, Doppstadt Methor with only approx. 500 operating hours and extensive additional equipment! TECHNICAL DETAILS Shredding System Type: Size L Number of roller teeth: 8 Feed Hopper Loading height: 3,124 mm Rear Discharge Conveyor Width: 1,000 mm Length: 6,900 mm Discharge height: 4,184 mm Conveyor speed: 1 – 4 m/s MACHINE DETAILS Chassis: Crawler track undercarriage Working position (L x W x H): 11,293 x 2,545 x 4,184 mm Transport dimensions (L x W x H): 7,820 x 2,545 x 3,231 mm Engine type: Diesel-hydraulic Make: Caterpillar C7.1 Gjdpjxdwiuefx An Rjbl Rated power: 205 kW (278 HP) Emission standard: Stage V Fuel tank capacity: 300 l EQUIPMENT Methor basic package with crawler undercarriage Crawler undercarriage incl. 2 travel speeds Track width 400 mm, 3-bar Additional hydraulic connection 70 l/min 24 V electronic control system Large complete radio remote control Service-friendly engine compartment with LED light Folding hopper with travel sensor and automatic control Hydraulically reversible fan wheel Acoustic start-up warning Frame for overbelt magnet Overbelt magnet Quick-change roller system on the roller Quick-change roller system on the machine Additional E-pump for operation when engine is shut down

Condition: ready for operation (used), Year of construction: 2021, operating hours: 506 h, functionality: fully functional, machine/vehicle number: 42, conveyor belt length: 6,900 mm, conveyor belt speed: 4,000 mm/s, conveyor belt width: 1,000 mm, Doppstadt Methor with only approx. 500 operating hours and extensive additional equipment! TECHNICAL DETAILS Shredding System Type: Size L Number of roller teeth: 8 Feed Hopper Gbodoxrn Hgopfx An Rsl Loading height: 3,124 mm Rear Discharge Conveyor Width: 1,000 mm Length: 6,900 mm Discharge height: 4,184 mm Conveyor speed: 1 – 4 m/s MACHINE DETAILS Chassis: Crawler track undercarriage Working position (L x W x H): 11,293 x 2,545 x 4,184 mm Transport dimensions (L x W x H): 7,820 x 2,545 x 3,231 mm Engine type: Diesel-hydraulic Make: Caterpillar C7.1 Rated power: 205 kW (278 HP) Emission standard: Stage V Fuel tank capacity: 300 l EQUIPMENT Methor basic package with crawler undercarriage Crawler undercarriage incl. 2 travel speeds Track width 400 mm, 3-bar Additional hydraulic connection 70 l/min 24 V electronic control system Large complete radio remote control Service-friendly engine compartment with LED light Folding hopper with travel sensor and automatic control Hydraulically reversible fan wheel Acoustic start-up warning Frame for overbelt magnet Overbelt magnet Quick-change roller system on the roller Quick-change roller system on the machine Additional E-pump for operation when engine is shut down

Condition: as good as new (ex-display), Year of construction: 2024, Special price: €29,970 net A machine is currently available immediately. The ideal machine for shredding voluminous, light aluminum chips or turnings. Not suitable for more solid aluminum parts. Includes: + Optimized cutting geometry + Adapted slide control + Load-dependent controlled hydraulic slide (which presses the chips against the cutting mechanism) Motor: 18.5 kW; 400 V - 50 Hz - 3 ph, Blade: 40x40mm, multi-rotatable, Rotor diameter: 260 mm, Control: Omron PLC, Cutter opening 600 x 800 mm, Funnel volume approx. 0.6 qbm, Hydraulically operated slider Sieve perforation of your choice (15 - 40mm) Gbodpfxsgmh H Tj An Rjl Suction nozzle Ø 160 mm Weight approx. 1,300 kg Dimensions (lxwxh) approx. 1737 x 1167 x 1650 mm The following options are available for an additional charge: - Raise the shredder by 30 cm (preparation for conveyor belt) +2,990 € net - Angle conveyor belt (discharge height approx. 220 cm) +9,770 € net - Overband magnet + €6,980 net - Control of conveyor belt and overband magnet + €2,750 net (Start and stop synchronized with the chipper) We would be happy to carry out a free test with your material. We invite you to come to us in Neckartailfingen. It is also possible for you to send us your material by freight forwarder and we will document the test with pictures and videos.

Condition: new, Year of construction: 2025, Ideal for shredding straw, polystyrene, leaves, hay and bread. Throughput depends heavily on the sieve and source material: - up to a maximum of 350 kg / h for straw with a 15 mm sieve - up to 60 kg / h for EPS with a 15 mm sieve Motor 11 KW - 400 volts, (9.2 kW or 15 kW also possible upon request) Optional: *Surcharge for the next larger machine with 18.5 kW and larger silo diameter + 1,995 € net stable steel construction, hardened cutting blades, sieve with interchangeable inserts, optional (10), 15, 22, 26, 30, 40, or 60 mm perforation with electric drive with star-delta switch Ue protection and 8 m supply line ready to plug in, blow-out nozzle 150 mm, optional for plastic or Grain pipes, Blowing width approx. 12 m, Chassis with 2 wheels Ø 380 mm, and a swiveling support wheel Ø 125 mm, all wheels with solid rubber tires, Dimensions approx. 1200 x 900 x 1270/1400 mm lxwxh Weight approx. 240 KG, Spare parts prices and options: 24 blades, hardened €9.90 each net 6 bolts €14.90 each net 1 sieve €475 each net Gbedpfxjzbizo An Rjl Cover €290 each net Styrofoam disc: €600 each net

Condition: as good as new (ex-display), Year of construction: 2023, Ideal for shredding polystyrene or similar materials Throughput depends heavily on the sieve and source material: - up to 60 kg / h for EPS with a 15 mm sieve *the coarser the sieve, the higher the throughput Motor 9.2 / 11 KW - 400 volts, stable steel construction, Gbodpsh S H T Usfx An Rel hardened cutting blades, sieve with interchangeable inserts, optionally (8), (10), 15, 22, 26, 30, 40, or 60 mm perforation with electric drive with star-delta switch Ue protection and 8 m supply line ready to plug in, blow-out nozzle 150 mm, optionally for plastic or grain pipes, blow width approx. 12 m, chassis with 2 running wheels Ø 380 mm, and a swiveling support wheel Ø 125 mm, all Wheels with solid rubber tires, Dimensions approx. 1200 x 900 x 1270/1400 mm lxwxh Weight approx. 240 KG, Spare parts prices and options: 24 blades, hardened €9.90 each net 6 bolts €14.90 each net 1 sieve €475 each net Lid €290 each net