Used Weima Shredder for sale (79)

Condition: ready for operation (used), 🔧 Key Specifications Cutting System: Four-shaft configuration with two cutting shafts and two clearing shafts. Iodpfx Ahjwnx Uijvstd Cutting Disc Diameter: Approximately 280 mm (11 inches). Cutting Unit Dimensions: Working width of 1,000 mm and length of 700 mm. Hopper Opening: Approximately 1,400 mm x 1,600 mm. Motor Power: Typically equipped with two 18.5 kW motors. Operating Speed: Low-speed operation at around 25 rpm for high torque and reduced noise levels. Weight: Approximately 2,500 kg

Condition: used, Technical specifications: For shredding wood waste Shaft width: 800 mm Shaft diameter: 300 mm Number of knives: 18 Knife dimensions: 30/30 mm Hopper: 1000x800x900 mm Screen diameter: 15 mm Discharge diameter: 200 mm Emergency stop switch Ijdeyrfigepfx Ahvstd Power supply: 400 V Motor power: 22 kW Overall dimensions: Length: 2000 mm Width: 1600 mm Height: 1800 mm

Condition: used, Year of construction: 1991, total length: 1,660 mm, total height: 1,470 mm, total width: 1,100 mm, Empty weight: 1.300 kg - Year: 1991 - Documentation available: No - CE certificate present: No - Serial number: 500-1014 - Main motor power [kW]: 18.5 - Rotor width [mm]: 600 - Opening width [mm]: 600 - Opening length [mm]: 800 - Sieve perforation [mm]: 15 - Number of rotating knives [pcs.]: 1 Itjdjwu Uy Iepfx Ahvjd - Transport dimensions: 1660mm x 1100mm x 1470mm (l x w x h) - Transport weight [kg]: 1300kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2002, Single shaft shredder with hydraulic pusher Weima WLK6S Main motor: 37 kW Itedpfxoyi Uqze Ahvjd Rotor length: 800 mm Rotor diameter: around 380 mm Rotor knives size: 40x40x23 mm The machine is in very good technical condition, ready for further work.

Condition: used, Year of construction: 2002, Single shaft shredder with hydraulic pusher Weima WLK6S Iodeyi Upwjpfx Ahvstd Main motor: 37 kW Rotor length: 800 mm Rotor diameter: around 380 mm Rotor knives size: 40x40x23 mm The machine is in very good technical condition, ready for further work.

Condition: used, Year of construction: 2002, Single shaft shredder with hydraulic pusher Weima WLK6S Iodpfxoyi Tics Ahvetd Main motor: 37 kW Rotor length: 800 mm Rotor diameter: around 380 mm Rotor knives size: 40x40x23 mm The machine is in very good technical condition, ready for further work.

Condition: used, Year of construction: 2007, SINGLE SHAFT SHREDDER WEIMA Itodpoyfwz Iofx Ahved MODEL WLK15 MAIN MOTOR 90KW ROTOR KNIVES SIZE 50X50 (NEW KNIVES) ROTOR LENGTH 1500MM ROTOR DIAMETER 370MM THE MACHINE IS 100% FUNCTIONAL READY TO WORK

Condition: used, Year of construction: 2007, SINGLE SHAFT SHREDDER WEIMA MODEL WLK15 MAIN MOTOR 90KW ROTOR KNIVES SIZE 50X50 (NEW KNIVES) ROTOR LENGTH 1500MM ROTOR DIAMETER 370MM THE MACHINE IS 100% FUNCTIONAL Ijdpfx Aoyfwxgshvotd READY TO WORK

Condition: used, Year of construction: 1998, Slow-speed model: with hydraulic moving floor Filling opening (mm): 1200 x 1200 Hopper volume: 2 cubic meters Throughput depending on material: 2 - 4 hopper fills per hour Motor (kW): 37 Profile rotor: 8 x rotating knives (reversible breaker plates) Knives: easily and quickly reversible/replacable by screws Knife shaft diameter / rotor diameter (mm): 368 Rotor length (mm): 1200 Rotor speed (rpm): 90 Knives: 64 Extraction port diameter (mm): 200 Air speed at suction port (m/sec): 28 Chipper weight (kg): 3300 Itedpfx Ahjx Srq Sovod Chipper length (mm): 2500 Chipper width (mm): 1900 Chipper height (mm): 1750

Condition: used, total length: 1,650 mm, total height: 3,380 mm, total width: 2,600 mm, - Documentation available: No Itjdewf El Aspfx Ahvsd - CE certificate present: No - Main motor power [kW]: 11 - Number of shafts [pcs.]: 1 - Hydraulic slide present: Yes - Opening width [mm]: 1000 - Opening length [mm]: 1200 - Transport dimensions: 1650mm x 2600mm x 3380mm (l x w x h) Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 1999, functionality: fully functional, fuel type: electric, - German-made - Year of manufacture: 1999 Ijdpfsw H Rn Eox Ahvjtd TECHNICAL SPECIFICATIONS: - feed opening: 600 x 800 mm - rotor diameter: 175 mm - rotor length: 600 mm - total power: 18.5 kW - number of knives: 14 pcs - reversible cutting knives: 30 mm x 30 mm - screen: Ø 15 and 12 mm - AUTOREVERSE - HYDRAULIC RAM - pressing ram height: 180 mm - rotor speed: 80–120 rpm - extraction nozzle diameter: Ø 200 mm - dimensions (L/W/H): 200 x 120 x 160 cm - weight: 1200 kg

Condition: ready for operation (used), Year of construction: 2005, operating hours: 11,192 h, functionality: fully functional, overall weight: 35,000 kg, rotor diameter: 800 mm, number of blades: 70, type of input current: AC, WEIMA FineCut 2500-800 shredder Iodpfowh Rcfex Ahvstd Machine in good working order, used in the production of alternative fuel. Currently out of use, ready for loading.

Condition: excellent (used), Catalogue number 7836 TECHNICAL DATA - Loading hopper inlet 800x600mm - Outlet for shredded wood diameter 160mm - Rotor working width 580mm - Main motor 22kW - Pump motor 0.75kW - Number of knives 15 pcs - Knife dimensions (crown type) 40x40mm Isdeyg Iqpjpfx Ahvetd - Screen 25mm - Hydraulic pusher drawer - Electric autoreverse - Dimensions (L/W/H) 1730x1200x1620mm - Weight 1100kg ADVANTAGES – German-made – Operating documentation (DTR) – Hydraulic pusher drawer – Autoreverse – Used chipper, in very good condition Net price: 39,900 PLN Net price: 9,500 EUR (based on rate 4.2 EUR) (Prices may change with significant fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 6114 TECHNICAL DATA - Feed hopper inlet: 800x1000 mm - Rotor working width: 800 mm - Pump motor: 0.75 kW - Main motor: 15 kW - Number of knives: 21 pcs - Knife size: 30x30 mm - Screen: 0.8x10 mm - Pressure drawer - Electric auto-reverse - Discharge augers: 2×1.1 kW - Dimensions (L/W/H): 2460x1800x2250 mm - Weight: 1660 kg – German-made – Auto-reverse – Pressure drawer – Not painted – In very good condition – Used shredder Net price: 63,900 PLN Net price: 15,200 EUR depending on the exchange rate, 4.2 EUR Itsdpfx Ajx Rqtpohvsd (Prices may vary with significant exchange rate fluctuations)

Condition: excellent (used), CATALOGUE NO. 7922 TECHNICAL DATA - Feed hopper inlet: 800x600mm - Outlet for processed wood: diameter 160mm - Rotor working width: 590mm - Main motor: 18.5kW - Number of knives: 14 pcs Ijdpjyvimxsfx Ahvjtd - Knife dimension: 30x30mm - Screen: 15mm - Pressing drawer - Electric auto-reverse - Dimensions (L/W/H): 1800x1300x1650mm - Weight: 1044kg ADVANTAGES – German-made – DTR documentation – Pressing drawer – Auto-reverse – Used wood chipper, very good condition Net price: 36,900 PLN Net price: 8,790 EUR Net price calculated at the exchange rate of 4.2 PLN/EUR (In case of larger exchange rate fluctuations, the price may change)

Condition: used, Year of construction: 2009, Briquetting press with hopper Motor 7.5 kW Briquette diameter: 50 mm Throughput capacity: 80 - 100 kg/h Weight: approx. 870 kg Oil capacity: 100 L With oil heating, agitator, and screw discharge With fill level sensor With automatic start Container size: 1500 x 1500 x 900 mm Overall dimensions: 2300 x 1800 x 1200 mm Operating hours: 3370 h Storage location: Nattheim Itjdpox Twb Ssfx Ahvsd

Condition: excellent (used), Catalogue no.: 7923 TECHNICAL DATA inlet of loading hopper: 800x600mm outlet for shredded wood: Ø 150mm rotor working width: 590mm main motor: 18.5kW pump motor: 0.75kW number of blades: 14 pcs blade size: 30x30mm sieve: 15/20mm pressure drawer electric auto-reverse dimensions (L/W/H): 1750x1200x2000mm weight: 1100kg ADVANTAGES – German-made Itsdpfx Ahsyug Eusvod – DTR technical documentation – pressure drawer – auto-reverse – used chipper, very good condition Net price: 35,900 PLN Net price: 8,550 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (in case of major exchange rate fluctuations, the price may change)

Condition: used, Year of construction: 2026, Special price - exhibition machine Technical specification WL 4 Hopper opening with log spacer 600 x 1,050 mm Hopper content 0.6 m³ Working width of the rotor 600 mm Diameter of the rotor 252 mm Drive power 18.5 kW Rotor speed 80 -120 rpm Number of knives 28 Type and size of knives concave / 40 x 40 mm, cutting reversible crowns Screen perforation 15-20 mm Painting WEIMA Standard RAL 2002 / 7016 Connected load 400 V +/- 5% / 50 Hz Weight approx. 1,300 kg Including: • Control cabinet* (Rittal) including electrical control (Moeller / Siemens) and star-delta start-up • Rubber vibration elements • V - rotor (patented) with knife pockets milled into the profile • Gear limit switch • Slider cycle • Slider half back • Log spacer hopper • 2. Knife series Itedpfoytrmzox Ahvjd Storage location: Supplier

Condition: used, Year of construction: 2026, Special Price - Showroom Machine Garbsen Our Machine Concept WL 6 The Weima High-Performance - Shredders with their flexible application possibilities can process all types of wood-based materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer scraps, etc.) into fuel chips, achieving enormous volume reduction of material for bulky items. Functionality: The machine is equipped with a large feed hopper and can be fed with a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees continuous and cost-effective material feeding without the need for manual assistance. The hydraulically controlled pusher supplies the wood waste to be shredded to the cutting area of the rotor and is automatically and load-dependently controlled. The internal pusher guides are made of highly abrasion-resistant plastic (polyamide) and can be adjusted. The hydraulic cylinders are suspended in a cardanic way to avoid lateral forces on the piston seals. The patented and profiled V-rotor made of solid steel has a diameter of 252 mm and operates with a rotor speed of 80 - 120 rpm. The concavely ground, aggressive, and 4-times reversible knives / cutting crowns are located in milled knife pockets on special knife holders; this patented system guarantees high throughput performance, low energy consumption, and optimum discharge of shredded material by reducing the cutting gap between counter knife and rotor for the first time. The screen located under the rotor determines chip size (10 - 100 mm ). A hydraulically opening screen basket is available upon request. Power transmission from the electric motors is via V-belts to a heavy-duty gearbox mounted on one end of the rotor shaft. Precise cut at high throughput with profiled V-rotor The specially developed by WEIMA V-rotor can be used universally and is made from solid material. Its aggressive material intake with up to two rows of knives guarantees high throughput with low power requirements. It can be equipped with hardened steel cutting knives with edge lengths of 30 mm and 40 mm. These can be turned several times in case of wear, which drastically reduces maintenance costs. Intuitive operation via Siemens PLC control with touch display To ensure that the electronics are optimally matched to the machine, we design, build, and wire our control cabinets ourselves. We use only high-quality components – for example from Siemens or Rittal. Intuitively operated touch surfaces guarantee quick adjustments. Functions such as setting the pusher stroke or stop ensure high throughput. The built-in overload protection also prevents defects on the machine. Technical Specification WL 6Feed opening 800 x 1,250 mmHopper capacity 0.9 m³Rotor length 800 mmRotor diameter 256 mmDrive power 22 kWRotor speed 90 rpmMax. number of knives 42 piecesKnife type and size concave / 40 x 40 mm, cutting crownsScreen perforation 10-60 mmPaint finish WEIMA Standard RAL 2022 / 7016Connection value 400 V +/- 5% / 50 HzWeight approx. 1,600 kgIncluding: - Control cabinet* (Rittal) incl. electrical control (Moeller/Siemens) and S Itsdeytrkgepfx Ahvjd

Condition: used, 0 800x600 mm Motor output 18,5 kW 0 0,6 m³ Diameter of the motor 252 mm Number of working hours 1741 h Dimensions (L/W/H) 1650x1200x1595 mm loading dimensions L x W x H 1650x1200x1800 mm Weight 1300 kg WEIMA shredder WL 4, machine completely checked ----- Note: The machine has been completely checked by us, it is running perfectly, see video. The blade and slide plate have already been replaced by the previous owner. We replaced the V-belt during the inspection. Description: The Weima high-performance shredders with their flexible application options can process all types of wood materials (hardwood, softwood, chipboard, MDF materials, plywood, veneer residues, etc.) into fuel chips and achieve an enormous reduction in the volume of the material in the case of bulky materials. Function: The machine is equipped with a large filling hopper and can be fed using a conveyor belt or by hand. This hopper can be adapted to individual needs and guarantees a continuous and cost-effective material feed without the need for manual assistance. The hydraulically controlled slider feeds the wood waste to be shredded to the cutting area of ??the rotor and is controlled automatically and depending on the load. The internal slider guides are made of highly abrasion-resistant Isdpjyrtzwefx Ahvetd plastic (polyamide) and can be adjusted. The hydraulic cylinders are cardanically suspended to avoid transverse forces on the piston sleeves. The patented and profiled V-rotor made of solid steel has a diameter of 252 mm and works at a rotor speed of 80 - 120 rpm. The concavely ground, aggressive and 4- way rotating knives / cutting crowns are located in milled knife pockets on special knife carriers. This patented system guarantees high throughput, low energy consumption and optimal discharge of the shredded material by reducing the cutting gap between the counter knife and the rotor for the first time. The screen mounted under the rotor determines the chip size (10 - 100 mm). A hydraulically opened screen basket is also available on request. The power is transmitted from the electric motors via V-belts to a strongly dimensioned gear, which is mounted on one side of the rotor on the shaft stub. Technical data WL 4 / 18.5 kW ----- Feed opening: 600 x 800 mm Standard hopper capacity: 0.6 m³ Rotor working width: 600 mm Rotor diameter: 252 mm Power: 18.5 kW Rotor speed: approx. 90 rpm Sieve diameter: 15 mm Paint finish: Weima standard RAL 2002 / 7016 Connection value: 400 V +/- 5% / 50 Hz Weight: approx. 1,300 kg Includes: Electrical control (Moeller / Siemens / Allen-Bradley) Control cabinet (Rittal / Sarell) Concavely ground cutting crowns (40 x 40 mm ) Sterntriangular start Vibration-damping foundation V-rotor (patented) with knife pockets milled into the profile (technical information according to the manufacturer - no guarantee!)

Condition: used, operating hours: 1,250 h, overall weight: 1,500 kg, rotor diameter: 252 mm, total length: 1,800 mm, total height: 2,000 mm, total width: 1,200 mm, rotor width: 600 mm, power: 18.5 kW (25.15 HP), rotational speed (max.): 90 rpm, filling opening width: 600 mm, filling opening length: 800 mm, No. 3255 Single-shaft shredder WEIMA WL 4 Used, approx. 1250 operating hours Quiet-running and slow-running V-rotor system Motor power main drive 18.5 kW Rotor diameter 252 mm Isdpfx Ahox Hhk Rsvjtd Rotor width approx. 600 mm Rotor speed approx. 90 rpm Hopper volume 0.6 m3 Inlet cross-section 800 x 600 mm LW Reversible blades, concave ground Automatic operation / manual operation Sieve perforation 15 mm Suction nozzle 160 mm Transport dimensions approx. 1800 x 1200 x 2000 mm LWH Weight approx. 1500 kg Sale on behalf of customer, ex location near 73430 Aalen, without dismantling, without transport and assembly Dismantling, loading and transport by us optionally possible Subject to errors in the description and price To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Pictures and videos serve as examples and do not represent the actual scope of delivery Terms of payment: Prices plus VAT, payment before collection or shipment Terms of delivery: ex location

Condition: excellent (used), CATALOG NUMBER 7725 TECHNICAL DATA - Loading hopper inlet 1200x1000mm - Outlet for shredded wood ø 200mm - Rotor working width 980mm - Main motor 22kW - Number of knives 24 pcs - Knife dimensions 30x30mm - Screen 16/11mm - Feed drawer Itodpfx Ahoyaq Scjved - Electric auto-reverse - Dimensions (L/W/H) 2600x2000x1720mm - Weight 2125kg ADVANTAGES – German production – Auto-reverse – Feed drawer – Very good condition – Used wood shredder Net price: 95,900 PLN Net price: 22,830 euro depending on exchange rate, 4.2 euro (Prices may vary in case of significant fluctuations)

Condition: excellent (used), CATALOG NUMBER 7726 TECHNICAL DATA - Feed hopper inlet – hydraulic lift 1200x1000mm - Discharge outlet for shredded wood diameter 200mm - rotor working width 980mm Iodpfx Ahox Tg E Hevjtd - Main motor 37kW - Number of knives 52 pcs - Knife size 40x40mm - Screen 20/25mm - Pressing drawer (hydraulic pusher) - Electric auto-reverse - Dimensions (L/W/H) 2520x2000x1740mm - Weight approx. 2500kg ADVANTAGES – German made – Screw conveyor (for wood chips) – Pressing drawer, serrated – Knives as new – New counter-knife – Very good condition – Used chipper Net price: 106,900 PLN Net price: 25,450 EUR depending on exchange rate 4.2 EUR (Prices may vary with significant fluctuations)

Condition: excellent (used), Catalogue number 7867 TECHNICAL DATA - Feed hopper inlet: 1000x1250mm - Rotor working width: 440mm - 4-shaft design - Motor power: 2×7.5kW - Sieve: 20mm - Electric autoreverse - Extraction nozzle diameter: 180mm - Dimensions (LxWxH): 1200x1500x2000mm - Weight: 1192kg Iodpfx Ajyab H Rehvetd FEATURES – German-made – Four-shaft cutting mechanism – Autoreverse – Very good condition – Not repainted – Used shredder Net price: 45,900 PLN Net price: 10,930 EUR depending on the exchange rate of 4.2 EUR (Prices may change with significant fluctuations)

Condition: good (used), Year of construction: 2004, functionality: fully functional, Briquetting press for wood or wood-like materials Operating hours: 1205 Throughput: up to a maximum of 100 kg/h Briquette: 60 mm cylindrical Motor: 7.5 kW Dimensions: approx. 2150 x 1700 x 1400 mm Container size: 1400 x 1400 x 920 mm Optional: Extraction system available as a hopper attachment. Requirements: Input material should ideally be shorter than 25 mm chip length Moisture content 6–12 % AR (absolutely dry) Machine suitable for intermittent operation. For example, up to 2.5 hours briquetting; 1 hour pause, etc. Isdpfxsw Hpize Ahvetd If the machine is to run continuously for longer than 2.5 hours, an optional cooling unit must be connected.