Used Cardboard Shredders for sale (2,036)

Condition: like new (used), TETRA PAK CARDBOARD PACKER CBP 32 VERSION 400 YOM 2010 2177 RUNNING HOURS ONLY!! MULTI PACKER FOR 200/250/1000 ml Crjdpoya I Sgefx Aiiei AS NEW CONDITION LOCATION - POLAND READY FOR SHIPPING

Condition: used, Industrial shredder or shredding line with carbide blades for shredding various materials such as wood, cardboard, glass fibre mats or similar, e.g. as a pre-treatment for recycling processes. The plant consists of two feed conveyors, the shredder, a transport fan and a soundproof enclosure. Technical data: - Total power: 31.7 kW - Shredder motor: 7.5 kW Crjdpfszrx Hdjx Aiiji - Feed width: 550 mm - Feed height: approx. 25/75 mm - Fan: 22 kW / 10,800 m³/h

Condition: like new (used), Year of construction: 2016, TETRA PAK CARDBOARD PACKER CBP 32 V400 NEW CONDITION, FOR MULTI CARTON FORMATS LAST VERSION 600V YOM 2016 5477 RUNNING HOURS ONLY!! NORDSON PROBLUE FLEX UNIT NEW CONDITION LOCATION - POLAND Codpfxjylny Uo Aiiori READY FOR SHIPPING

Condition: repair required (used), Year of construction: 2002, Hacker chipper requiring overhaul with a 1300 mm rotor width 45 kW motor Crjdpfs Ah T R Tjx Aiiji approximately 50 knives, 40 x 40 mm, on the rotor The chipper runs, but the gearbox wobbles on the rotor stub It is still possible to chip material, but it will need to be repaired at some point Large hopper on top, approximately 2.4 x 2.4 m

Condition: good (used), Year of construction: 2014, operating hours: 18,520 h, Single-shaft shredder, especially suitable for secondary shredding and granulation of pre-shredded material. Application: Commercial waste for thermal or material recovery, e.g. paper, cardboard, plastics and foams, rubber, leather, textiles, floor coverings, etc. Lindner Power Komet 1800 Year of manufacture: 2014 Control cabinet; complete with ABB frequency converter, Recooler Operator panel Hopper Drive motors: 200 kW Hydraulic unit: complete Total weight approx. 21 t Dimensions approx. LxWxH mm: 5000 x 2800 x 3000 mm Inspection: possible upon arrangement. Csdpfx Aijwxmb Ejiori Delivery time: immediate.

Condition: refurbished (used), Year of construction: 2015, operating hours: 20,640 h, functionality: fully functional, overall weight: 24,500 kg, total width: 2,500 mm, Completely overhauled machine Single-shaft shredder, particularly suitable for secondary shredding and granulation of pre-shredded materials. Application: Commercial waste for thermal or material recycling, e.g., paper, cardboard, plastics and foams, rubber, leather, textiles, floor coverings, etc. Crjdpfx Aijyu Undsiei Lindner Komet 2200 HP, overhauled in March 2026 Year of manufacture: 2015 Control cabinet with ABB frequency converter, dust-tight with recooler Control panel: complete Drive motors: ABB 2x200 kW Paintwork new / RAL: 5003/7001 Rotor bearings/pull-off sleeve/shaft seals: new Hydraulic unit: complete Total weight approx. 24.5 t Dimensions (LxWxH) mm: 5800 x 2500 x 3100 mm Inspection and trial run/test run possible by appointment. Delivery time: immediate

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, power: 250 kW (339.91 HP), No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Machine type: Complete grinding system (dry chip mill, hammer mill) Throughput capacity: 12 t/h MACHINE DETAILS Drive power: 250 kW Power consumption: 430 A Crsds Ah Dzpopfx Aiiji EQUIPMENT Magnetic separator Heavy particle separator Scheuch top-mounted filter Collection trough with discharge screw conveyor from Knoblinger Steel structure

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, overall weight: 3,500 kg, rotor diameter: 420 mm, number of blades: 44, rotor length: 800 mm, power: 22 kW (29.91 HP), type of input current: three-phase, rotational speed (max.): 100 rpm, input voltage: 400 V, additional equipment features: Swan Neck Conveyor, Equipment: CE marking, The S-22 shredders are designed for optimal ease of maintenance and serviceability. It features easy access to all service points, including interchangeable screens and knives, allowing for quick and efficient replacements or adjustments. The machine is equipped with a hydraulic tipping Crsdpfx Aie Aa Anreiji hopper, which provides effortless access to the cutting chamber, making the removal of foreign objects both safe and straightforward. Additionally, the swing-out power pack design enhances accessibility, streamlining routine maintenance and minimizing downtime. • Rotatable knives for an extendable lifetime • Rotational speed adjusted to suit material • Compact and solid design • Low maintenance efforts and easy installations S-22 comes with swan neck conveyor designed to discharge shred into 1m3 bags. Option of 20mm, 30mm and 60mm screen size. APPLICATIONS • Plastics • Wood / Timber • Packaging • Cardboard

Condition: new, Year of construction: 2026, warranty duration: 12 months, rotational speed (max.): 25 rpm, Shredder ZEIGE300 is a strong and reliable equipment. We have calculated and designed everything so that the machine can withstand the loads that are required to shred plastic and similar materials. The ZEIGE300 Shredder can grind any shape plastic that fits between the blades. We have tested it with HDPE, PP,PET and PS. The shredder has no restrictions on thickness. If the piece of plastic is too thick, the blades will not shred because the machine is designed so that the plastic cannot jam the machine – automatic revers system. PP, HDPE, PS from 0.7mm to 12mm have been successfully tested. The films are too thin and slip between the blades. The shredder is also designed to be easy to clean and maintain. Very fine shredding is only possible with a shredding of the same material twice. Application: ZEIGE twin-shaft mechanism machines are mainly used in the shredding process, plastic, cardboard, pine boards with low thickness cardboard dividers. Shredder for different types of plastics. Compact mechanism design based on precious plastics – project adjusted to our needs. Technical data: Dimensions of the mechanism: 300x250mm Inlet dimensions, upper part: 515x480mm Drive of the machine: 1x4KW (electric motor) Drive transmission: hardened Number of drive shafts: 2 pcs. Number of knives: 26 pcs. Thickness of knives: 6 mm Machine dimensions: 1670x1410x600mm Capacity: 40 kg/h Construction: Solid frame construction with inlet for safety work. Painting: Powder coating Control: SIEMENS Codpfx Aieg Rci Ioijri Algorithm switching on the reverse rotation in case of overloading the machine. We can build any shredder with power up to 2 x 15 Kw. You can send RFQ we are Polish company full production process is done in our factory located in Tarnów. Please send us You material we can test it and design the machine according to your needs.

Condition: excellent (used), Year of construction: 2022, operating hours: 1,850 h, functionality: fully functional, machine/vehicle number: 220, total length: 13,000 mm, total width: 5,700 mm, total height: 4,200 mm, overall weight: 37,000 kg, power: 404.52 kW (549.99 HP), TITAN 950 ARJES, in very good condition and with very few hours of use. Equipped with a shredding rotor and a magnetic pulley on the cross conveyor, this shredder completely removes ferrous materials. Crjdpfx Aez D Dqcsiioi

Condition: like new (used), Year of construction: 2022, Rotor: 260 mm Feed opening: approx. 510 x 815 mm Rotor length: approx. 510 mm Motor: 15 kW Blades: 24 Screen: 15 / 20 mm Cjdpfxe Ah Rqve Aiisri Technical data available upon request. Completely factory-refurbished * New blades * New counter blade * New slide guide strips * Test run * New paint job

Year of construction: 2020, condition: excellent (used), Cabbage shredders S65 Cabbage cutting machine 2020, Stainless, cabbage shredding machine, with two top mounted de-stalkers, 5000kgs - 7500kgs per hour, disk diameter 650mm can be used for whole large cabbage heads, mobile, 3Ph Crodpfx Asy H Hm Roiisi

Condition: used, Year of construction: 2025, functionality: fully functional, machine/vehicle number: MT15324005, MT15124005, MT15224005, MT15424005, total height: 3,000 mm, total width: 4,000 mm, total length: 6,000 mm, overall weight: 5,700 kg, For sale, available from our location in 04225 Taucha, is a used, fully automatic EMMECI line. Credpfx Aj Agwlneiiei The EMMECI line, type E 450 HS, was acquired in 2025. The line consists of: * Gluing machine MC151 * Positioning machine MC152 * Wrapping machine MC153 * Square-corner stapler MC154 The line is used for the automatic production of wrapped boxes. Upon request, we will gladly send you a data sheet of the complete line if you are interested in purchasing it. Currently, the line is still connected to power and can be inspected after scheduling an appointment. Images of the line will follow in the next few days. Dismantling, loading, and transport are the responsibility of the buyer. The dismantling of the fully automatic line is to be carried out by the manufacturer. Only the manufacturer can guarantee full functionality after reassembly.

Condition: used, Year of construction: 2019, operating hours: 19,020 h, functionality: fully functional, total length: 5,813 mm, total height: 3,111 mm, overall weight: 23,200 kg, total width: 2,925 mm, rotor length: 2,200 mm, number of blades: 84, year of last overhaul: 2025, # Lindner Komet 2200 HP – Year of Construction 2019 – 400 kW – approx. 19,020 operating hours For sale is a powerful and regularly maintained Lindner Komet 2200 HP secondary shredder, year of construction 2019, from our existing industrial waste processing plant. The machine was used for the secondary shredding of processed material for the production of substitute fuels (SFS) and was permanently integrated into our stationary production line. ### Technical Data - Manufacturer: Lindner Recyclingtech - Model: Komet 2200-1 HP - Year of Construction: 2019 - Operating Hours: approx. 19,020 h - Drive Power: 2 × 200 kW (400 kW) - Speed: 355 RPM - Operating Voltage: 400 V / 50 Hz - Cutting Unit: 172R - Screening Unit: DM 30 - Hydraulic feed system - Frequency-controlled drive - Siemens HMI touch panel, 15 inches - Freestanding hydraulic unit - Mechanical safety couplings - Mechanical central lubrication ### Equipment and Features Powerful belt drive with ABB asynchronous motors and frequency inverters to adjust the shredding performance to the respective material. Hydraulic feed system for controlled material feed, reusable replaceable knives, and hydraulically pivoting screening unit and stripping comb for maintenance work. ### Maintenance and Servicing The machine was regularly and carefully maintained and serviced throughout its service life. Crjdpfx Ae Ahnl Reiisi A separate maintenance contract exists with the manufacturer, Lindner Recyclingtech, for the Komet 2200 HP. In addition to the scheduled maintenance, necessary repairs and wear parts were continuously replaced. Important maintenance measures: - 2025: Complete clutch replaced. - Regular rotor resurfacing: The rotor is completely resurfaced at regular intervals to repair worn areas and extend its service life. Maintenance and service records are available and can be viewed upon request. ### Protected Housing of the Control Cabinets The associated control cabinets are located in a separate control room and are thus protected from dust and dirt from the production environment. ### Spare Parts Various available spare parts are included in the scope of delivery and will be handed over to the buyer upon purchase. ### Sale Due to Plant Modernization The sale is taking place due to the modernization and restructuring of our existing recycling plant. An on-site inspection is possible after prior arrangement. ### Dismantling and Loading We will personally assist the buyer on-site during dismantling and loading and supervise the work to ensure a smooth process. Technical documentation as well as maintenance and service records can be provided upon request. Price upon request.

Condition: new, Year of construction: 2021, protection type (IP code): IP54, type of cooling: air, Specification: Cross feeding chain conveyor; Inclined separator, reversible; Longitudinal chain conveyor, reversible incl; Itsbkuow Uqqnor Ivfjn Cleaning roller conveyor; Flat belt conveyor with metal-free zone, reversible; Metal detector; Csdpfx Aij Afxc Aoisri Crane for contaminated material; Vibratory feeding table; Drum chipper „ORIGINAL PALLMANN“, type PHT 850 x 1250 with mechanical clamping system (3 knives-rotor); Auxiliary exhaust system; Trough belt conveyor for bark; Scraper conveyor; Double screw conveyor; Trough chain conveyor, type Z-1600/2; Electric design & automation.

Condition: good (used), Year of construction: 2012, 2 x Carton closing machine / carton sealer with wet adhesive strips, Bedo, VA 3821 – used: Price ex-works: Year of manufacture: 2006: €5,500 (net), incl. loading! Year of manufacture: 2012: €8,500 (net), incl. loading! Manufacturer: Bedo Type: VA 3821 (No.: 3821.2.7062) Year of manufacture: 2012 3/N/PE AC400/230V 50Hz Control voltage: 24 VDC Current: 16 A Compressed air: 5-7 bar Type: VA 3821 (No.: 3821.1.6093) Year of manufacture: 2006 400/3PN/50Hz, 14.8A, control voltage: 24V, Compressed air: 5-7 bar Carton infeed height: approx. 800 mm Infeed speed: approx. 0.4 m/s Carton design: FEFCO code 0201 Processing range: L 200–600 mm, W 150–500 mm, H 80–480 mm Carton sizes: e.g. 300 × 200 × 100 mm to 600 × 400 × 275 mm Carton content: 0.2–32.5 kg Crsdo Agpdgepfx Aiioi Capacity: approx. 25 cartons/minute Carton sealing: longitudinal, top and bottom with wet adhesive strips Adhesive strip tear control and warning “Adhesive strip roll end” Control “Water supply disrupted” Condition: good, regularly maintained, in operation until early 2026 Available: immediately Location: Leipzig area

Condition: refurbished (used), Year of construction: 2022, operating hours: 618 h, functionality: fully functional, power: 15 kW (20.39 HP), overall weight: 1,000 kg, total length: 1,750 mm, total width: 1,100 mm, total height: 1,640 mm, working width: 510 mm, input voltage: 400 V, control cabinet height: 200 mm, control cabinet length: 600 mm, control cabinet width: 600 mm, number of blades: 24, rotational speed (max.): 100 rpm, rotor diameter: 260 mm, rotor width: 510 mm, sieve perforation: 15 mm, type of input current: AC, warranty duration: 6 months, Equipment: documentation/manual, Recycling shredder, wood shredder, chipper, shredder MHR510 proline The MHR proline series consists of robust and energy-efficient wood shredding machines designed for reliable continuous operation in commercial environments. These ready-to-connect shredders offer high performance, low energy consumption, and excellent value for money. This makes them ideal for craft businesses, recycling companies, and wood processing companies looking for an economical yet powerful solution. The machines are manufactured in our factory in Germany and sold directly. Codpfx Aj Ahtd Ejiieri Advantages: - Continuous, uniform shredding process - High performance with low energy consumption - 2 knife rows - Robust construction - Larger feed opening - Excellent value for money - Siemens PLC controlled - MHR510 proline The offered machine has been completely overhauled; the motor, gearbox, and hydraulic unit have been inspected. Wear parts such as knives, counter-knives, and guide rails have been replaced. The hopper, drive protection, and cladding panels have been recoated. Rößler recycling shredder – "Made in Germany"

Condition: defective spare-parts repository (used), Year of construction: 2026, On behalf of our client, we are offering this 2026 JENZ BA926 Tiger Wood Shredder, available as fire damaged insurance salvage. This machine caught fire whilst in operation with the fire concentrated in the engine bay. Csdpe Ah Svkefx Aiisri Location: Midlothian, Scotland For questions or more information, please call us, or send a message.

Condition: used, Year of construction: 2012, operating hours: 33,400 h, functionality: fully functional, control cabinet height: 2,300 mm, number of blades: 28, year of last overhaul: 2025, overall weight: 33,000 kg, type of input current: AC, Lindner Jupiter 2200 – Year of manufacture 2012 – 264 kW – Pre-shredder For sale is a powerful and regularly maintained Lindner Jupiter 2200, year of manufacture 2012, from our existing commercial waste processing plant. The machine was used as an industrial pre-shredder for processing various commercial waste and recyclable material fractions and was permanently integrated into our stationary production line. Technical data Manufacturer: Lindner Recyclingtech Model: Jupiter 2200 Year of manufacture: 2012 Machine number: 1744 Machine weight: approx. 33,000 kg Drive power: 2 × 132 kW (264 kW total) Rotor speed: 51 rpm at 50 Hz Operating voltage: 400 V / 50 Hz Number of knives: 28 pieces Knife dimensions: 116 × 116 × 37 mm Screen opening: Sickles 79 mm Crjdpo Ahnlbsfx Aiisi Frequency converter: ABB ACS-800 Hydraulic unit: Bosch Rexroth Hydraulic drive: 11 kW Hydraulic oil tank: 400 liters Equipment and special features The Jupiter 2200 features a frequency-controlled drive and a hydraulic feed unit for controlled material feed. The robust design and powerful cutting unit enable use in industrial recycling and processing plants. Maintenance and servicing The machine was regularly and carefully maintained and serviced throughout its service life. A separate maintenance contract exists for the Jupiter 2200 with the manufacturer Lindner Recyclingtech. In addition to the regular maintenance, extensive maintenance and modernization measures were carried out. Important work carried out: Both couplings completely overhauled. Control computer and display renewed. Rotor completely armored and regularly serviced. Air conditioning unit renewed. Both frequency converters (FC) overhauled. Complete new set of sickles installed. The corresponding maintenance and service records are available and can be viewed upon request. Protected housing of the control cabinets The associated control cabinets are located in a separate control room and are therefore protected from dust and dirt from the production environment. Sale due to plant modernization The machine is being offered for sale as part of the modernization and restructuring of our existing recycling plant. An on-site inspection is possible after prior arrangement. Dismantling and loading We will personally assist the buyer on site during dismantling and loading and supervise the work to ensure a smooth process. Technical documentation as well as maintenance and service records can be provided upon request. Price on request. We look forward to your inquiry.

Condition: excellent (used), Year of construction: 2024, operating hours: 1,700 h, functionality: fully functional, A pre-shredder in perfect condition is for sale. Credpfx Aie Aia Svjisi The machine can be inspected at any time.

Condition: used, Year of construction: 2012, operating hours: 38,000 h, functionality: fully functional, overall weight: 20,500 kg, number of blades: 50, control cabinet length: 3,000 mm, control cabinet height: 2,300 mm, power: 200 kW (271.92 HP), rotational speed (max.): 264 rpm, # Lindner Power Komet 1800 – 200 kW – Year of Manufacture 2012 – Secondary Shredder For sale is a regularly maintained and well-kept Lindner Power Komet 1800, year of manufacture 2012, from our existing commercial waste processing plant. The machine was used as an industrial single-shaft secondary shredder for the processing of pre-treated commercial and construction mixed waste and was permanently integrated into our stationary processing line. ### Technical Data - Manufacturer: Lindner Recyclingtech - Model: Power Komet 1800 - Year of Manufacture: 2012 - Machine Number: 1953 - Operating Hours: approx. 38,000 h - Machine Weight: approx. 20,500 kg - Main Drive: 200 kW - Hydraulic Drive: 11 kW - Operating Voltage: 400 V / 50 Hz - Rotor Speed: 264 rpm at 50 Hz - Number of Blades: 50 pieces - Blade Dimensions: 172 × 57 × 28 mm - Screen Hole: Ø 30 mm - Frequency Inverter: ABB ACS-800 - Hydraulic Unit: Bosch Rexroth - Design Throughput: approx. 5 t/h (material-dependent) ### Equipment and Application Area The Power Komet 1800 features a frequency-controlled 200 kW main drive and a hydraulic feed unit for uniform material feeding. The machine was used for the secondary shredding of already pre-sorted and pre-shredded commercial and construction mixed waste. ### Maintenance and Servicing The machine was regularly and carefully maintained and serviced throughout its operating life. A separate maintenance contract with the manufacturer Lindner Recyclingtech exists for the Lindner Power Komet 1800. In addition to the regular maintenance work, necessary repairs and wear parts were continuously replaced. Important maintenance measures: - Drive bearings completely renewed. - Drive belts completely renewed. - Rotor completely re-armored. The complete rotor re-armoring is carried out regularly to repair areas subject to wear. Maintenance and service records are available and can be viewed upon request. ### Protected Housing of the Control Cabinets The associated control cabinets are located in a separate switchgear room and are therefore protected from dust and dirt from the production environment. ### Sale Due to Plant Modernization The sale is due to the modernization and restructuring of our existing recycling plant. An on-site inspection is possible after prior arrangement. Crodpfo Ahnqyox Aiioi ### Dismantling and Loading We will personally assist the buyer on site during the dismantling and loading and supervise the work to ensure a smooth process. Technical documentation as well as maintenance and service records can be provided upon request. Price on request. We look forward to your contact.

Condition: used, Year of construction: 1989, functionality: fully functional, machine/vehicle number: 89A 2664, power: 18.5 kW (25.15 HP), overall weight: 1,950 kg, fuel type: electric, loading space volume: 1.6 m³, loading space width: 800 mm, loading space length: 1,000 mm, loading space height: 2,000 mm, Description For sale is a robust ZENO wood waste shredder / single-shaft shredder, type ZTLL 800 × 1000, manufactured in 1989. The machine is in good working order and was used in a wood processing facility. The shredder features an 18.5 kW main drive and a hydraulic pusher floor. The feed hopper measures 1,000 × 800 mm, and the height is approximately 2,000 mm. The rotor diameter is approximately 300 mm (type-specific), and the rotor speed is approximately 140 rpm. The machine weight is approximately 1,950 kg (type-specific). The rotor is equipped with cutting plates / individual teeth mounted on tool holders. The blades or cutting teeth are in good used condition. The rotor also shows a well-maintained condition with no significant damage visible in the provided images. Crjdpfx Aoz Ikz Asiiji It is fitted with a sturdy, reinforced perforated screen basket with a 20 mm hole diameter. The perforated screen is in very good condition. The 20 mm screening is suitable for producing a correspondingly fine, uniform shredded material. The complete electrical control system, including the control cabinet, is included in the scope of delivery. This includes, among other things, a main switch, system on/off, operating and fault indicators, forward/reverse, and control for the hydraulic pump. The control cabinet is fully present and will be sold together with the machine. The offer also includes a powerful transport fan for pneumatic transport of the shredded material. The fan motor has 18.5 kW / 25 hp, 380/660 V, 36.5/21 A, 1,455 rpm, 50 Hz, cos φ 0.86, and protection class IP54. The motor weight is 136 kg. Existing pipes and fittings belonging to the system can be taken over after inspection. This means that not only the shredder itself is offered, but a largely complete combination of wood waste shredding, control, and pneumatic material transport. The machine is particularly suitable for wood waste and production residues from carpentry shops, interior design, timber construction, joineries, and comparable wood processing companies. Inspections are possible by appointment. The location of the system is 3608 Thun, Switzerland. Sale from the location. Dismantling, loading, and transport, as well as any export and customs costs, are the responsibility of the buyer, unless otherwise agreed in writing. The machine is sold in its existing used condition as inspected. Technical specifications are provided to the best of our knowledge; errors and prior sale are reserved. Selling price: 12,500.00 EUR Price net, plus any applicable statutory taxes and duties. Export, customs clearance, and import duties are the responsibility of the buyer. Technical specifications in brief Manufacturer: ZENO Zerkleinerungsmaschinenbau Norken GmbH · Type: ZTLL 800 × 1000 · Year of manufacture: 1989 · Machine No.: 89A 2664 · Feed hopper: 1,000 × 800 mm · Height: approx. 2,000 mm · Main drive: 18.5 kW · hydraulic pusher floor · Perforated screen: Ø 20 mm, very good condition · Blades/cutting teeth: good condition · Rotor diameter: approx. 300 mm* · Rotor speed: approx. 140 rpm* · Machine weight: approx. 1,950 kg* · complete control cabinet included · Transport fan: 18.5 kW / 25 hp. * Type-specific comparison data ZENO ZTLL 800 × 1000. The specifications and condition of the offered machine are binding.

Condition: like new (used), Year of construction: 2024, functionality: fully functional, rotor diameter: 640 mm, number of blades: 62, total length: 2,000 mm, Vecoplan original rotor for VAZ2000 Crjdpfxe Ah Hfrs Aiiei 60x60 mm cutters hardfaced rotor includes cutters

Condition: used, Year of construction: 1994, functionality: fully functional, machine/vehicle number: 500/2089, Weima shredder, type: WL 6 Cutting shaft with round knives Motor power: 22 kW Including control cabinet Discharge screw up to the suction nozzle Machine is available immediately Handover in its current condition, as inspected, Cedpfo Ahykyex Aiieri without warranty or guarantee.

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2012, overall weight: 10,000 kg, loading space length: 1,300 mm, loading space width: 1,000 mm, total height: 3,400 mm, total length: 3,500 mm, total width: 2,000 mm, power: 90 kW (122.37 HP), input voltage: 380 V, rotary shear 2 shafts - 2 motors 45kw - inversion in case of jam - shredding chamber 1300 x 1000 - thickness of new knives 55 - 4 tons - large loading hopper - possibility of loading Crsdps Ahrp Rjfx Aiioi very versatile and very powerful, can pre-grind organic matter for methanizers, copper cables, lumps, plaster, BA13, D3E, plastics, wood, bumpers, bottles, metals, hollow bodies, etc. use to grind up sick calves at the renderer.