Washing and shredding machine MT-1000

Stalmont MT-1000

Condition: new, Year of construction: 2025, functionality: fully functional, RSS 2-shaft shredder 600 series 2 x 7.5 kW rotor length: 600 mm blades: 30 mm The machine can be configured to your requirements, including electrical control cabinet. Delivery time by arrangement. Infeed and discharge conveyors available on request. This shredder is ideally suited for destroying items such as hard drives, laptops, mobile phones, rubber, wood, paper, etc. Want to know more? Call or email us. Gjdpfxsw Ry Alo Af Uobi On arrangement, we can also deliver and install the machines. Please respond with your name, company name, and a valid telephone number for a prompt reply.

Condition: used, Machine: Screw conveyor, Screw conveyor Type: Askania Maschinenbau GmbH, screw conveyor Model: TSF 315, No. 197 Year of construction: 1999 Mass: 350 kg Rated voltage: 230/400 V/ Connected load: 4 KW Length: 9.40 m Ø auger: 250 mm Material: Steel auger/stainless steel trough Gedpfxjrn U H Hj Af Ujbi

Year of construction: 2026, condition: new, The PT-1200 belt press is a device used for extracting apple juice. This process takes place between the machine’s belt and appropriately arranged press rollers. The extracted juice is pumped into the pasteurizer tank. Technical data: Capacity: up to 4000 kg of apples per hour Juice yield from pressed apples: up to 75% Installed power: 3.4 kW, 230 V Godpeukq T Hofx Af Ujbi Dimensions L × W × H (mm): 3100 x 2190 x 1650 Weight: 2000 kg Belt width: 1200 mm Belt speed: adjustable Juice collection tray with sieve Juice pump

Year of construction: 2026, condition: new, The obtained juice flows into integrated collection tank under the press. Then the pump transfers the juice from the press to a desired tank for further processing. The pressing process is continuous. Capacity: 3000 kg/h. Gjdpfx Asq Nl Aqef Ujbi The most evolutionary feature of our Belt press POWERPRESS line is that belt presses come with integrated pump and juice collection tank. This means you save money and do not need additional juice collection tank and pump which otherwise would use much space and cause additional costs. -The juice yield of apples using our belt press 3000 is ~75 %. -There is a filtration sieve integrated into the juice collection tank. It filtrates the juice providing clearer and purer product. -The belt presses work automatically: when the mash inlet tank is full, all other machines, which come before belt press, turn off automatically. When the juice tank is full, the pump automatically pumps the juice into the tanks. -The belt press 3000 includes a high-pressure washer, which continuously washes the belt of the machine. Our belt washing system is simple, does not contain any engines or reducers, so it prolongs the use time and saves the service costs. -Pneumatic lifting of the security cover of the press ensures easier access when cleaning. -After work, belt press should be manually washed with a water stream. A full washing process takes around 15-20 minutes. Washing is simple and all the parts of the belt press are easily removable without any tools. -Belt tension is adjustable. -Machine is made entirely of stainless steel and has adjustable feet for more convenient use. -Easy to clean with no closed or inaccessible spaces, all parts are easy to assemble.

Condition: new, Washing machine WA LC40 with centrifugal mill RM40 for single belt press EBP420, EBP500, EBP580 capacity up to 2 000 kg/h power: elevator 2,2 kW mill 4,0 (5,5) kW (PS) electric outlet 400V 50Hz (3 phases) fuse 16 A dimensions: length 2,000 mm width 700 mm height 2,200 mm insertion resp. discharge height 800 mm weight 280 kg material 1.4301 / AISI 304 connections: connection for cleaning ½ “ inside connection for waste water 2 “ outside mash discharge height 1,250 mm suitable for pomaceous fruit Gbsdpfx Afob Ncmfe Uei scope of delivery 7, 9 and 12 mm cutting screen

Condition: excellent (used), CERTUSS Universal 500 TC. 500 kg/h. 10 bar. Rapid steam generator Godpjxqr D Tofx Af Uobi

Condition: used, The TREPKO PKG 1 is equipped with a single stage of all station , the filling head are built to fill various products ie. Yoghurt, Cream, Sauces, Milk, Fruit pieces of 1 cm, Custard, Etc. The easy maintenance makes these machines highly recommended in production floors keeping productivity at a steady pace. Trepko cup fillers are mainly driven by a main motor converting the movement in an INDEX type gear box, signals for the air cylinders to take action on each station. The filling volumes depend on the clients needs, therefor these have a standard filling volume of 50-500 ml per cup, we can enlarge the filling volume by increasing the diameter of the filling cylinder on request. The machine was used for filling Cheese in small rectangular cups, in regards of change overs to 71,75,80,95 mm OUTSIDE DIAMETER Cups we can offer this service in-house. Contact us for more information. Capacity: 2400 c/h (40cps per minute ) Filling volume: 50-500 gr Prefilling: Fruits or flavours Cup dispensing: Automatic Lid applicator: Automatic Sealing: Automatic Out feed conveyor: Automatic E: 3 phase / 50 hz Control panel: PLC SIEMENS Cup format: Currently rectangular on order we can change to your cup size Gbjdpfouruf Aex Af Uji Loaction: IN STOCK Sale: The machine can be sold "as is " TLC Needed or Fully Refurbished. Contact us for more information.

Year of construction: 2026, condition: new, The semi-automatic filler is the perfect solution for small companies that produce up to 5000 bag-in-boxes per year. The system is equipped with: an electromagnetic flow sensor; an electronic control panel - for programming the filling quantity (minimum 1 liter) and - for performing the calibration; and a self-priming pump with a EURO 20 rubber impeller. At the beginning and at the end of the cycle, the vacuum should be controlled by the user and the injection of nitrogen should be managed by means of two manual pulsar valves. The valve is opened and closed using the two stainless steel tools supplied as standard. Drip collector buffer is included in the scope of delivery. The user selects the desired filling quantity and turns the switch on to start the filling cycle. The filler performs a complete cycle: Opening the valve / Starting the pump / Stopping the pump / Closing the valve. - Touch screen operation for programming capacity and calibration; - Digital flow meter max. 7000 l/h - Stainless steel filling head - Pulse valve for manual nitrogen injection - Blocking system for the filling head - Drip-free filling - Automatic start and stop - Double semi-automatic system for opening and closing the connection - Capacity for filling flexible bags or pouches (high or low type) from 1 liter capacity - S/S- Suitable for cleaning circuit (CIP) Technical data: - Electrical requirements: 220V 50-60 Hz - Suitable for: Ø 20 - 25 mm - Capacity: 5 lt/h 150 pcs. Gsdpfxotpxtuj Af Uebi - Capacity: 10 lt/h 100 pcs. - Capacity: 20 lt/h 40 pcs.

Condition: new, Year of construction: 2024, Tunnel type parts washer for metal and plastic parts. Used in different sectors like automotive, food, metal machining, sheet metal, plastic crates etc. Operation Principles The work piece enters in tunnel by means of belt conveyor system; the positioned nozzles wash every piece of the work piece. The work piece, while passing through the tunnel is washed by pressurized and heated water + chemical mixture. All oil, chip and other industrial contaminations are removed from the surface of work piece during this washing process. Tunnel washing machines are standardized as well as specially tailored according to application by INTERSONİK engineering department. Washing Process Flow Washing, passivation and drying are designed exclusively by the Intersonik Process Engineers in accordance with the desired results supported by Intersonik environmental friendly chemicals. Operation Process ► Pre wash ► Main wash Gbsdpfx Aed I Azvef Uoi ► Rinsing ► Passivation ► Drying Application Areas ► Automotive industry ► Military defense industry ► Food industry ► In all manufacturing industry for mass production and maintanance purpose ► Metal furniture industry Conveyor is specially designed and manufactured by INTERSONIK according to your needs and work piece. Conveyor speed is adjustible. Automatic liquid fill is standart. Electrical heating is standart heat exchanger and burner heating types are optional. All data is visible and controllable via digital screens PLC control is optional. All liquid tanks are isolated for heat retention. Mist collecting vacuum pump and unit is standart. Please feel free to contact with us for other options and details. tunnel washing, automatic washing, automotive parts washing, metal washing, parts washer, degreasing, spray washing, pressurised washing machine

Condition: new, capacity up to 2 000 kg/h power 1,5 (2,0) kW (PS) electric outlet 400V 50Hz (3 phases) fuse 16 A dimensions: length 1 600 mm width 700 mm height 2 100 / 2 350 mm insertion resp. discharge height 800 mm weight 200 kg Gbodpfx Asb I Ubwsf Usi material 1.4301 / AISI 304 connections: connection for cleaning ½ “ inside connection for washing bath 2 “ outside fruit discharge height 1 545 mm suitable for pomaceous fruit