Used Shoe Press for sale (12,661)

Condition: new, Year of construction: 2024, functionality: fully functional, operating hours: 1 h, type of input current: three-phase, table width: 1,000 mm, table length: 2,600 mm, total length: 2,000 mm, total width: 3,090 mm, total height: 3,600 mm, overall weight: 3,800 kg, workpiece height (max.): 60 mm, Wood gluing press 12 working fields main cylinders 12 x 3 =36 pieces ,cylinders 63 x 60 and 4 pressure side levelling 50 x 50 pieces 12 x 4 =48 pieces .Machine new invoice .Warranty one year .Press rotates with inverter controlled transmission .Press stop is on induction sensor .Or rotates smoothly .Actuation of cylinders with lever switches press field is one meter width 2,6 length 60 mm thickness . Gujdstx T Tyjpfx Ankjb

Year of construction: 2003, condition: used, frame hydraulic press WEGOMA Workspace: width 3600 mm height 2500 mm Guodpfecmat Usx Ankjb the amount of lateral hydraulic cylinders 3 pieces top two pieces beam mechanically Move Mechanical compression setting more photos an questions

Condition: new, Year of construction: 2026, machine/vehicle number: GP6000H2, functionality: fully functional, input voltage: 400 V, type of input current: AC, pressing force: 12 t, total length: 6,000 mm, overall weight: 2,600 kg, working width: 180 mm, working length: 6,000 mm, Equipment: chassis, documentation/manual, MASSIVE GLUING PRESS FOR GLULAM Technical Specifications: Gujdpfx Aneu Axfceksb Gluing Length: 6 m Multiple presses can be combined as needed to achieve the desired length (segments of 6 m) Pressure Bar Length: 980 mm Gluing Width: from 80 mm to 180 mm Overall Gluing Height: from 800 mm to 1300 mm (available as per inquiry) Cylinder Stroke: 150 to 300 mm Clamping Force: max 10 tons per cylinder; the appropriate force is adjusted on the pressure regulator We prepare 3D Model of the Machine for you to plan the floor space The hydraulic unit is equipped with a hydraulic accumulator and a pressure switch, which allows the hydraulic pump to operate intermittently during the pressing time. The hydraulic accumulator ensures constant pressure, even when the pump is not in operation. When the pressure drops, the pump restarts and refills the accumulator. Cycle Time: approximately 10 seconds. All surfaces that come into contact with the adhesive are protected with polished stainless steel, making it easy to clean adhesive with water. The press features two trolleys with pneumatic cylinders for the lateral alignment of the glued workpiece. Machine Weight: 2600 kg Power Supply Requirement: 5 kW, 3 x 400 VAC Options: -Customized length up to 6 meters -Customized working width -Number of trolleys for lateral alignment available upon request -Trolley with roller for adhesive application available upon request -Multiple presses can be combined as needed to achieve the desired length (segments of 6 m) last segment is as per order 2,0 - 6,0 meters -Customized Overall Gluing Height

Year of construction: 2002, condition: excellent (used), MULTI-PRESS MP.610 6 DIE 6 BLOW Perfect mechanics and electronics ! 12x80 mm 105 mm CUTOFF 170 ppm YEAR 2002 PERFECTLY WORKING AVAILABLE IN SPAIN Guodpfeh Rkhnox Ankjb SOME PICTURES AND VIDEOS AVAILABLE

Condition: excellent (used), Year of construction: 2002, You are purchasing an ironing system Presse Vite ironing/steam table with 4 height-adjustable whirlpool hoods and 2 steam generators Working width approx. 340 cm, 9000W Year of manufacture 2002 223-380V Pr12LP Control unit GE VAT20 U20NOK7S Guodju Nyu Sepfx Ankob Find more items in our shop!

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, pressing force: 173 t, stroke length: 500 mm, overall weight: 16,000 kg, working length: 4,250 mm, Equipment: CE marking, full service history, The machine can be inspected under power until 04/05/2026! TRUMPF TruBend 5170 including BendMaster! The machine has been regularly serviced and maintained exclusively by Trumpf with a complete service history. The hydraulic cylinders are leak-free and show no oil loss. All robot tooling shown in the pictures is included. TECHNICAL DETAILS Stroke: 500 mm Pressing force: 1,700 kN Working length: 4,250 mm Tool clamping: Hydraulic, upper and lower Number of axes: 6 Payload: 60 kg MACHINE DETAILS Voltage: 3 x 400 V Rated current: 41.0 A Frequency: 50 Hz Connected load: 28.0 kVA Control voltage: 24 V DC Overrun time: max. 90 ms Overrun distance at 220 mm/s: max. 10 mm Overrun distance at 160 mm/s: max. 8.5 mm Operating pressure: max. 300 bar Weight: 16,000 kg EQUIPMENT Gsdpfxey Hqc Nj Anksub CE marking Documentation/manual Back gauge with sensor technology CNC crowning CNC tool displacement BendMaster (robot on 8 m rail) Vacuum manipulators CNC regripping station Double sheet detection Safety device BendGuard Lasersafe Spare parts: cable drag chain, spare vacuum suction pads, BWF machine mounts (machine feet)

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, pressing force: 85 t, stroke length: 215 mm, throat depth: 410 mm, clearance between the columns: 1,750 mm, working length: 2,050 mm, TECHNICAL DETAILS Gedpfx Ansy Ix Ipjkjub Press force: 85 t Bending length: 2,050 mm Frame gap: 1,750 mm Stroke: 215 mm Throat depth: 410 mm Controlled axes: y1, y2, x, R MACHINE DETAILS Control manufacturer: DELEM Total power: 13 kW Dimensions & Weight Dimensions (L x W x H): 3,190 x 2,100 x 2,375 mm Machine weight: 8,750 kg EQUIPMENT Two-hand foot operation 2 support arms Crowning Die shifting CNC control Side safety doors 2 manual backgauge fingers

Condition: ready for operation (used), functionality: fully functional, Year of construction: 1995, machine/vehicle number: 9557, punching force: 110 t, stroke rate (max.): 28 1/min, working height: 990 mm, overall weight: 3,400 kg, hole diameter: 40 mm, TECHNICAL DETAILS Punching force: 110 t Punching capacity: Ø 40 x 20 mm Notching: 750 Stroke rate: 28 strokes/min Working height: 990 mm MACHINE DETAILS Control: conventional Dimensions & Weight Gsdpoy Iwwvofx Ankjub Space requirement (L x W x H): approx. 2,300 x 1,300 x 2,300 mm Machine weight: approx. 3,400 kg

Condition: ready for operation (used), Year of construction: 1973, machine/vehicle number: 22123, functionality: fully functional, pressing force: 315 t, table width: 1,500 mm, table length: 2,500 mm, TECHNICAL DETAILS Pressing force: 315 t Table width: 1,500 mm Table length: 2,500 mm Guodpfx Ansy Nbtkekjb Max. working area: 883 mm MACHINE DETAILS Dimensions: 3.0 m x 1.6 m x 4.5 m EQUIPMENT Separate hydraulic power unit Control panel

Condition: ready for operation (used), Year of construction: 2014, machine/vehicle number: 441, functionality: fully functional, pressing force: 28 t, throat depth: 220 mm, overall weight: 3,600 kg, working width: 1,000 mm, Equipment: CE marking, TECHNICAL DETAILS Pressing force: 28 t Max. working width: 1,000 mm Column gap: 950 mm Throat depth: 220 mm Gsdpfx Aoy Rxy Dsnkoub Back gauge depth: 415 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,500 x 1,150 x 2,400 mm Weight: 3,600 kg Transport packages: 1 Power: 3.0 kW EQUIPMENT CE marking Documentation

Condition: ready for operation (used), Year of construction: 2007, functionality: fully functional, pressing force: 28 t, stroke length: 200 mm, throat depth: 200 mm, installation height: 325 mm, working length: 835 mm, TECHNICAL DETAILS Pressing force: 28 t Bending length: 835 mm Gjdpsy Rry Defx Ankoub Back gauge travel range: 0 - 370 mm Stroke: 200 mm Distance between frames: 890 mm Support tables: 200 x 275 mm Throat depth: 200 mm Installation height: 325 mm Number of cylinders: 1 Working speed Pressing stroke: 8-10 mm/s Return: max. 35 mm/s Positioning accuracy: +/- 0.05 mm MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 1,600 x 1,500 x 2,200 mm Total weight: 3,500 kg EQUIPMENT Operating manual

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Weinig Dimter Profipress C 2800 P - 6 m gluing press Manufacturer: Weinig Dimter Model: Profipress C 2800 P - 6 m Year of manufacture: 2009 Condition: Very good Machine description: For sale: Weinig Dimter Profipress C 2800 P - 6 m wood gluing press, year 2009, designed for the production of glued wooden panels and elements made of soft timber. The machine was developed for efficient production using PVAC glue in D2 / D3 class and allows processing of material within specified width, thickness and input length ranges. According to the documentation, this model can process timber with widths from 30 to 80 mm, thicknesses from 15 to 40 mm and input lengths from 2100 to 2800 mm. The machine allows the production of panels with variable widths from 600 to 1200 mm. For short lengths, the collecting distance range is 700 to 1400 mm. The output is up to 10 to 15 infeeds per minute, depending on the entrance width. The Profipress C 2800 P - 6 m is intended for processing soft timber. The permitted bending tolerance is maximum 5 mm per meter. The documentation also specifies recommended operating conditions, including room temperature from 15 to 30 degrees Celsius and air humidity in the range of 40 to 65 percent. Technical data: - Model: Profipress C 2800 P - 6 m - Year of manufacture: 2009 - Performance: max. 10–15 infeeds/min, depending on entrance width - Timber width: 30–80 mm - Timber thickness: 15–40 mm - Timber entrance length: 2100–2800 mm - Collecting distance for short lengths: 700–1400 mm - Panel width: 600–1200 mm - Timber type: soft timber - Permitted bending: max. 5 mm/m - Glue type: PVAC D2 / D3 - Recommended room temperature: 15–30°C - Recommended air humidity: 40–65% Gsdpjyvgiasfx Ankoub Features and advantages: - Press designed for glued panel production - Machine from the renowned Weinig Dimter brand - Output up to 10–15 infeeds per minute - Possibility to produce panels with variable width - Suitable for processing soft timber - Works with common PVAC D2 / D3 glue - Industrial application for woodworking and production plants

Condition: good (used), 2-spindle paper drilling machine Gusdpey Sh Duofx Ankeb

Condition: good (used), Toggle Press - Hot Foil Stamping Machine Manufacturer unknown; very heavy-duty design Godsy Shz Tjpfx Ankoub Upper plate (heated) 24 x 37 cm Lower plate 39 x 37 cm

Condition: good (used), Year of construction: 2008, TruBend 5085 press brake Gsdjy Shc Djpfx Ankjub

Condition: good (used), Year of construction: 2012, TruBend 5050 Gujdpsy Shcdofx Ankob

Condition: good (used), Year of construction: 2007, functionality: fully functional, operating hours: 94,201 h, bending force (max.): 400 t, installation height: 595 mm, control type: CNC control, Bending length [mm]: 3550 Press force [t]: 400 Control: Cybelec ModEva 10s Operating hours [h]: 94,201 Standard equipment: - Robust machine frame as all-steel, welded construction - Ram with high bending strength - Electrohydraulic top drive via proportional valves - Modern block hydraulic system - CNC back gauge for X and R axes, safe finger adjustment from the front via safety interlock - EHT upper tool clamping system, manual, head width 26mm, max. load 3000 kN/m - EHT lower tool clamping, manual, clamping width 90mm for block and 13mm for single V-dies, without clamping - Control: CYBELEC ModEva 10S on Windows, 2D graphical control with 10.4" color display - Control cabinet air conditioning + Back gauge - System 1, 5 axes, straight fingers, 140mm width, R-axis travel 150mm + EHT quick-clamp device for upper tools, pneumatic, head width 26mm, max. load 3000 kN/m (self-centering horizontally) + EHT pneumatic lower tool clamping, clamping width 55mm + Hardened insert strip for EHT lower tool clamping 55mm / 90mm Guodpfx Asy Sauronkeb + CNC-controlled lower tool shifting, stepless positioning via back gauge 1 (max. working length 4550 mm) + CNC-controlled crowning device integrated in table, without tool clamping, max. load 3000 kN/m + Lazersafe safety system (for max. upper tool height 440mm) + Additional foot switch + Bending aid, 1st arm, max. load 1500N, with 2 integrated standard support rails + Bending aid, 2nd arm, max. load 1500N, with 2 integrated standard support rails + 2 support rails for a bending aid with 14mm T-slot, ruler, and ball rollers + 2 table extensions for bending aid + Left short park position + Right short park position

Condition: good (used), Year of construction: 2005, functionality: fully functional, pressing force: 320 t, installation height: 615 mm, control type: CNC control, Bending length [mm] 4220.00 Press force [tons] 320 Control unit TRUMPF TASC 6000 Hydraulic hours [h] 53,030 Standard equipment: - Rigid machine frame, all-steel welded construction - Press beam with high bending strength - Spherical mounting of the press beam with beam tilt capability - Electro-hydraulic top drive with 4-cylinder technology - Proportional valve technology and switchable double pump - Modern block hydraulics with control valves mounted on the cylinder - Electronic pressure scale - Measuring system with centrally mounted glass scales and temperature compensation - Manual, integrated wedge crowning in the bed - "New Standard Clamping" manual, hardened, self-centring upper tool clamping system for vertical tool change - Lower tool clamping with hydraulic clamping, hardened - Programmable lower tool displacement (pneumatic, 2 positions) - 2-axis backgauge system with rack-and-pinion drive for X and R axes, 2 stop fingers, safely adjustable from the front - Machine control: TASC 6000 - Operator console with LCD keypad, emergency up, down and E-stop foot switch - Safety features: integrated side doors and automatic rear roller cover - Control cabinet cooling - Oil cooler - Modern machine design + 5-axis backgauge system + Hydraulic upper tool clamping + CNC crowning + BendGuard + 2 support consoles Gusdpfsy Sarqjx Anksb + Park position + 1 bending aid + Additional foot switch

Condition: good (used), Year of construction: 2010, functionality: fully functional, bending force (max.): 85 t, installation height: 615 mm, number of axes: 6, Equipment: CE marking, documentation/manual, safety light barrier, Bending length [mm] 2720 Press force [t] 85 Control unit TRUMPF TASC 6000 Operating hours [h] 45666 Hydraulics on [h] 13762 - Top drive concept in four-cylinder design Y1/Y2 - Electrohydraulic ram drive with proportional valve technology - Ram position measuring system with deflection compensation via glass scales - Modern block-type hydraulics - Spherical suspension and inclined position of the pressure beam - CNC backgauge system - Safe finger adjustment from the front - 2 stop fingers - Self-centering, manual, hardened upper tool holder for vertical tool change - Hardened, manual lower tool clamping - Program-controlled lower tool displacement (I-axis) for 2 positions - Flat front cover - Modern safety guard - CE mark - Oil cooler clamping device - Increased installation height - 6-axis backgauge - Hydraulic upper tool clamping - Hydraulic lower tool clamping - CNC crowning Gsdpfx Anoy Saq Teksub - CNC I-axis - BendGuard - ACB preparation - 2 support consoles

Condition: excellent (used), Format: A4 Gjdpfx Anoy R U Dxokoub Number of Colors: 1

Condition: used, Year of construction: 2012, operating hours: 5,812 h, functionality: fully functional, Baler Presto HPK 50 HS, year of manufacture 2012, with perforator and incline conveyor (sliding belt conveyor) Manufacturer: Presto Gedpfsy R Tp Tox Ankjub Model: HPK 50 HS Year of manufacture: 2012 Operating hours: 5,812 Drive power: 30 kW Press force: 50 t Feed opening: 1,600 x 650 mm (L x W) Chamber cross-section: 700 x 950 mm Max. filling volume: 1.06 m³ Cycle time: 19 s Tying: 4-fold Throughput rate at 35 kg/m³: 5.5 t/h 60 kg/m³: 8.8 t/h 100 kg/m³: 12.7 t/h Bale weight: up to 500 kg Machine dimensions: 8,420 x 1,900 x 2,400 mm (L x W x H) Machine weight: approx. 10,500 kg Perforator, hydraulically movable Drive power: 2 x 4 kW / 400 V Throughput: approx. 220 m³/h Clear feed opening: 1,380 x 1,200 mm Incline conveyor Length: 7,931 mm Belt width: 1,400 mm Total width: 2,026 mm Incline: 29° Speed: 0.6 m/s Materials: Paper, cardboard, film, PET bottles Please note: All technical specifications are based on manufacturer information. We do not accept liability for the accuracy of these specifications or for potential errors. This offer is non-binding, subject to prior sale, and may be withdrawn at any time. Inspections by prior arrangement are possible. Sale is ex-works, subject to prepayment, with no warranty or guarantee.

Condition: good (used), Year of construction: 2021, operating hours: 123 h, functionality: fully functional, Vertical Baling Press HSM V-Press 860 plus, Year of Manufacture 2021 Technical Data: Manufacturer: HSM Model: V-Press 860 plus Year of manufacture: 2021 Operating hours: 123 Pressing force: 60 t Drive power: 4 kW Filling opening: 1195 x 645 mm Filling height: 1114 mm Bale size: approx. 1200 x 1200 x 780 mm Bale weight: 480 kg Tying: manual Theoretical idle cycle time: 25 s Theoretical press output: 12 cbm/h Gedpfx Aney R Tncjkjub Dimensions: 1800 x 1253 x 2990 mm (W x D x H) Weight: 2213 kg Materials: Film, paper, cardboard Note: The press is in good condition. It has been inspected and tested by us. A video is available on our website or YouTube channel. Please note: All technical data is based on manufacturer information. We do not assume liability for any provided information or possible errors. Offers are subject to change, prior sale reserved, and may be revoked at any time. Inspections are possible by appointment. Sale is ex location, without warranty or guarantee. Our payment terms are 100% advance payment.

Condition: used, Automatic feed in 2 speeds Drilling capacity up to 35 mm steel Gujdpfxjy R S Iuo Ankjb 2 engine speeds Cross table Coolant pump

Condition: good (used), Year of construction: 2021, operating hours: 450 h, functionality: fully functional, Vertical Baler HSM V-Press 860 plus, Year of Manufacture: 2021 Gujdpfxoy R Srto Anksb Technical Data: Manufacturer: HSM Model: V-Press 860 plus Year of Manufacture: 2021 Operating Hours: 450 Pressing Force: 60 t Drive Power: 4 kW Feed Opening: 1195 x 645 mm Filling Height: 1114 mm Bale Size: approx. 1200 x 1200 x 780 mm Bale Weight: 480 kg Binding: manual Theoretical Cycle Time (idle): 25 s Theoretical Throughput: 12 cbm/h Dimensions: 1800 x 1253 x 2990 mm (W x D x H) Weight: 2213 kg Materials: Film, Paper, Cardboard Comment: The baler is in good condition. It has been checked and tested by us. A video is available on our website or YouTube channel. Please note: All technical data is based on the manufacturer's information. We accept no liability for the accuracy of the information provided or for any possible errors. Offers are subject to change without notice, prior sale reserved, and may be withdrawn at any time. Inspections are possible by appointment. Sale is ex location, without warranty or guarantee. Our payment condition is 100% advance payment.

Condition: good (used), Year of construction: 2000, functionality: fully functional, CNC press brake, 6 axes - Pressing force: 1,300 kN - Bending length: 3,060 mm - Number of axes: 6 programmable (X1, X2, R1, R2, Z1, Z2) - Y-axis rapid traverse: 200 mm/s - Y-axis working speed: 11 mm/s - Y-axis return: 135 mm/s - Travel speeds: X - 500 mm/s, R - 300 mm/s, Z - 1,000 mm/s - X-axis travel: 600 mm - Max. back gauge range X: 860 mm - R-axis travel: 250 mm - Y-axis stroke: 365 mm - Installation height: 535 mm - Y-axis tilt: ±10 mm - Bending length: 3,060 mm - Clear distance between uprights: 2,690 mm - Throat depth: 410 mm - Table width: 120 mm - Working height: 1,050 mm - Oil capacity: 250 l Dimensions: Width: 3,640 mm, Depth: 2,210 mm, Height: 2,885 mm Weight: 12,950 kg The machine can be inspected under power! Gsdpfox S H Uxjx Ankeub