Used Sandvik Dx 780 for sale (97)

Condition: used, Year of construction: 2019, Serial number: 5xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21113 Specifications: 2019 model Impact hours: 3550 (may increase slightly) Compressor hours: 5538 (may increase slightly) Engine hours: approx. 8300 (may increase slightly) Winch Rod changer Water mist system Carousel Volvo engine Undercarriage (see photos) Remote control CME grinder L5 GPS Ihsdpow Rag Defx Ah Nst Recently serviced Hammer is good. Work lights Thread greasing system Radio Air conditioning Ready for delivery Description: Sandvik DX800i drill rig with L5 GPS for sale.According to the owner, everything is working properly, and the rig was recently serviced.The hammer has been repacked newly.Ready for delivery.

Condition: used, Year of construction: 2019, Please contact ATS Norway for more information Please provide reference number upon request: 21854 Specifications: 2019 model Ihedpfxjxypt Rj Ah Njt About 7135 hours (will give a little) Stroke hours: 3432 hours Compressor time: 5292 hours Chassis (see pictures) CME grinder Water mist Leica GPS Recently serviced Carousel Vacuum cleaner Rod shifter Automatic drilling Protective cage Winch Air conditioning/ac Radio Remote control Light Ready for delivery   Description: We have a 2019 DX800i drilling rig w/ water mist and Leica GPS for sale. All services and maintenance have been carried out continuously and the rig is in good condition according to the owner. The rig has recently undergone new service. Ready for delivery Engine hours: 7135

Condition: used, Various remote controls for mobile screening plants EXTEC/SANDVIK Track Control Handset Ihodpfx Aoxz Ez Toh Nst Track Handset Manual Handset Frequency: 418 and 433 Hz / 11 bit

Condition: excellent (used), End mills Make Sandvik Ihodpfjdwbkiox Ah Njt Coro mill 316

Year of construction: 2015, condition: excellent (used), 10 turning steels Make Sandvik Coromant : Iodpfsfr T D Tsx Ah Neht 1 : 340 SC5 DCLHR 291311 285 2226 2 : 340 SC5 DCLHR 291311 285 2226 3 : 340 SC5 DCLHR 291311 285 2226 4 :C5-PCLNB-35060-12 Sumitomo 5: PSC50-DDHNL-35060-15 6: C5-PCLNB-35060-12 Sumitomo 7: C5-PCLNB-35060-12 Sumitomo 8: SECO S5-DCLNR-35060-12 9: MPDES26073-105R03C 10 :MPDES 26073-105RO03C Tools are sold individually or as a lot Unit price 80 Euro plus VAT.

Condition: used, Drill sleeve MK 4 Length 170 mm Diameter 63 mm Ihedpjb Tyqasfx Ah Nst

Condition: used, Diameter 48 mm Bilz thread adapter Diameter 63 mm Variolock connection Ihodjb Tyqpjpfx Ah Njt Length 160 mm Total length 180 mm 2 pieces available

Condition: used, Diameter centering pin 60 mm Diameter bolt circle 4 inch 102 mm 4 thread MK 16 contact surface 128 mm Diameter vario hole 80 mm Iedpfob Tyrvjx Ah Noht

Condition: as good as new (ex-display), Mounting SK 60 Length 310mm Iodjb Tyv Iopfx Ah Njht Diameter 170 mm unused 3 pieces available

Condition: excellent (used), Professional milling head from the renowned brand Sandvik Coromant. Working diameter: Ø80 mm – ideal for roughing and finishing machining of steel, stainless steel, and cast iron. Mount: SK40 / ISO40. Model: 346.220242R25. Design with indexable inserts – currently equipped inserts are in good condition. High precision, rigidity, and durability – industrial-grade head for CNC machining centers and milling machines. Original Sandvik product – a leader in cutting tool technology. Condition: used, in very good technical condition – ready for immediate operation ✅ Ideal for facing, face milling, and processing large surfaces ✅ High performance and long service life thanks to high-quality inserts ✅ Premium tool – German and Swedish quality Isdexld Awspfx Ah Neht

Condition: used, Year of construction: 2014, operating hours: 8,150 h, Serial number: ZS00xxxx Ihedpfx Ahjx A R T Dj Nst Please contact ATS Norway for more information Please provide reference number upon request: 21953 Specifications: Model year: 2014 Hours: approx. 8,400 (may increase) Weight: 48,975 kg 310 kW Cable remote control Outer mantles replaced about 1,500 hours ago (summer 2024) Undercarriage (see photos) Video available Delivery by agreement Description:2014 Sandvik UH440i spindle.Operating hours will increase as the machine is in daily use.The outer mantles were replaced approximately 1,500 hours ago. See video.Delivery by agreement. Hours: 8150 Own weight: 48975 Model: UH440i spindel. SE VIDEO.

Condition: used, Year of construction: 2018, operating hours: 9,000 h, Serial number: UJ440i-1xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21954 Specifications: Model year: 2018 Hours: approx. 9,000 315 kW Weight: 68,334 kg Radio remote control Jaw opening: 80–250 mm 9,000-hour service completed Undercarriage (see photos) Delivery by agreement Description:2018 Sandvik UJ440i jaw crusher.The 9,000-hour service has been completed.The fixed jaw plates have been replaced; the others are worn, but the owner has new ones available.Delivery by agreement. Ihsdjx A R Ubopfx Ah Net Hours: 9000 Own weight: 68334 Model: UJ440i kjeftknuser. SE VIDEO.

Condition: used, Year of construction: 2018, Serial number: 4xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20805 Specifications: 2018 model Engine hours: Approx. 3500 Hammer hours: Approx. 19000 Weight: 11,100 kg Chassis (see pictures) Belt width: 25 cm Total width: 220 cm Iedswvzrmepfx Ah Nsht Rod shifter New depth gauge Vacuum cleaner Winch Service history 2 track guides are being replaced before sale Ready for delivery Description:Well maintained Sandvik DINO 400 Drilling Rig.The rig is from 2018 and has had approximately 3500 engine hours.Equipped with rod changer and new depth gauge.Ready for delivery. Own weight: 11100 Model: Dino DC400RI

Condition: used, Year of construction: 2006, Please contact ATS Norway for more information Please provide reference number upon request: 20763 Ijdowvzrajpfx Ah Njht Specifications: Approx. 2006-2007 model (stated by owner) Total hours: 13,800 (can increase) Chassis (see pictures) Central grease, some manual points Comes with an extra jaw (recently replaced) Hanging sieve Tape and rolls (see pictures) Main band completely overhauled with new band and side edges Daily operations Video is attached Deutz engine (provided by owner) Ready for delivery Notes: An output psb nd is worn Own weight: 48000 Model: Ca. 2006 Sandvik 1208 Knuser med Sandvik hengesikt. God stand!

Condition: used, Year of construction: 2014, Serial number: 2xxxx Please contact ATS Norway for more information Please provide reference number upon request: 21943 Specifications: Year model: 2014 Engine hours: approx. 6000 Power: 105 kW Weight: 11,000 kg Undercarriage (see photos) Remote control Winch Track width: approx. 25 cm Machine width: approx. 220 cm Newly overhauled engine Newly overhauled hammer, used approx. 20 hours after overhaul Stage 4 engine Screen backlight is slightly weak Description:Sandvik Dino DC400RI drilling rig from 2014.Both the engine and the hammer have been overhauled. The engine has run approx. 1000 hours since the overhaul, while the hammer has only been used for a couple of weeks.Some minor leakage/sweating.Can be delivered at short notice.See video. Own weight: 11000 Iodpfx Ahox Anaus Neht Engine hours: 6000 Model: Dino DC400RI Borerigg. Overhalt motor og hammer SE VIDEO

Condition: used, Year of construction: 2016, operating hours: 7,635 h, Serial number: CB00xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20363 Specifications: - 2016 model - 7635 Hours - 67600 kg - Good with crushing plates again - Side conveyor Ihjdpfowi Rp Uox Ah Net - Rubber in feeder - Central lubrication - Volvo engine - 315 kW - Magnet - Feed box - New batteries - Ready for delivery Description: We have a 2016 Sandvik UJ440i crusher w/ side conveyor and magnet for sale. Maintenance and services have been taken continuously. Everything works as it should according to the owner. Errors and defects may be found. Ready for delivery Hours: 7635 Own weight: 67600 Total Weight: 67600 Model: UJ440I

Condition: used, tool holder, milling holder, milling tool, adapter, intermediate sleeve, extension adapter -Manufacturer: Sandvik Coromant, milling adapter Ovp -Type: C8-391.01-80 125A -Mounting diameter: 80 mm -Functional length L: 125 mm -Transport dimensions: Ø 80 x 173 mm -Weight: 4.5 kg/total Ihodeu Tytyopfx Ah Not

Condition: used, cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter, corner milling cutter -Manufacturer: Sandvik Coromant, Secodex face milling cutter head shoulder milling cutter -Type: R290-160Q40-12M 848471 -Hole diameter: 40 mm / bolt circle diameter 66 x 14 mm -Dimensions: Ø 160 x 60 mm Ihsdpfxju Tytme Ah Njt -Weight: 3.9 kg

Condition: used, Tool holder, milling holder, collet holder, milling tool, adapter, clamping unit, tool holder, -Manufacturer: Sandvik Coromant / Komet, 60 pieces recording / clamping units SK50 -Different types: see photos, more pictures can be sent Iedpjhuf Izsfx Ah Njht -Type/number: see photo parts list -Price/sale: complete -Transport dimension: 600/500/H500 mm -Total weight: 210 kg

Condition: good (used), cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter, corner milling cutter -Manufacturer: Sandvik Coromant, face milling cutter head, shoulder milling cutter -Type: R 282.2 160 -Hole diameter: 40 mm / bolt circle diameter 67 x 14 mm -Dimensions: Ø 160 x 62 mm -Weight: 4.9 kg Iodpfx Ahevz T Aie Neht

Condition: good (used), cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter, corner milling cutter -Manufacturer: Sandvik Coromant, cutter head milling cutter -Type: R26Hole: Ø 27 mm -Dimensions: Ø 90 x 50 mm -Weight: 1.3 kg Ihedpfjvz T Thsx Ah Not

Condition: used, cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter, corner milling cutter -Manufacturer: Sandvik Coromant, face milling cutter head corner milling cutter 2 pieces -Type: 490-125Q40-14M 725386 Ihodpfxju Uwvue Ah Nst -Adapter: SK50x40x40 -Delivery/Price: complete -Dimensions: Ø 125 x245 mm -Weight: 6.8 kg/piece

Condition: used, Cutter head, milling holder, carbide milling cutter, indexable insert milling cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter -Handover in current condition as seen -Condition see pictures -Manufacturer: Sandvik Coromant, face milling cutter head shell milling cutter Ø 113 mm -Type: R260.22-100Q32-12H -Intake: SK50 -Dimensions: Ø 113 x 225 mm Iedpfx Asqh Efboh Neht -Weight: 5.5 kg

Condition: used, cutter head, milling holder, carbide cutter, indexable insert cutter, face milling head, milling head, cutter head shell milling cutter, face milling cutter, corner milling cutter Ihsdpsu Uwwxefx Ah Nst -Manufacturer: Gewefa Sandvik Coromant, face milling cutter head 5 pieces -Type: 1x Ø100 / 2x Ø125 / 2x Ø160 mm different versions, see photos -Adapter: SK50x40x40 -Delivery/Price: complete -Transport dimensions. 280/270/H230mm -Weight: 40 kg

Condition: good (used), Turning tool holder, tool holder, turning tool, turning tool holder, tool holder, axial tool holder, bar gripper, thread cutting head, boring bar holder -Number: 25 pieces turning tools -Take: Ø 30 mm -Various types: see photos, more pictures can be sent -Sale: is only sold as a whole -Dimensions: 400/655/H630 mm Iodpfx Ajgl Duhsh Njht -Weight: 34 kg