Used Sheet Offset for sale (8,897)

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 3 mm, Technical features: Maximum working length 2160 mm Maximum sheet thickness (steel 400 N/mm2) 2.0 mm Maximum sheet thickness (stainless steel) 1.5 mm Maximum sheet thickness (aluminium) 3.0 mm Maximum sheet width of development 1500 mm Maximum height of bending on four sides max * 203 mm Bending blade action radius 180 degrees Machine width approx. 5500 mm Machine length approx. 7000 mm Machine height 2500 mm Total weight 23000 kg Power 25 kW Frequency 50 Hz Pressure 6 bar Nsdpfx Aherwxkhsvjwd Loading system Blank Feeder with portal

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, functionality: fully functional, RISOGRAPH SF9350 EII A3 showroom machine with base cabinet and consumables. Njdpoyvuzujfx Ahvewd

Condition: excellent (used), Motorized folding bench, swing bending machine, bending machine (used) Manufacturer: GEKA Model: MA 200 Year of manufacture: 2003 Working length: 2040 mm Max. sheet thickness for St 37: 3 mm Max. sheet thickness for Al, Al Mg 3: 4 mm Max. sheet thickness for V2A: 2 mm Opening width of the upper beam: 180 mm Adjustability of the lower beam: 60 mm Max. bending angle: 135° Backgauge, mechanically adjustable by hand: 0 – 750 mm Weight of the machine: approx. 2600 kg Drive power: 3 kW Required space (L x W x H): 3600 mm x 2000 mm x 1400 mm The machine comes from a research center and is in very well-maintained condition. Forklift available for free loading onto truck Nwjdpfxsyvuh Uj Ahvsd Affordable shipping available Location of the machine: 48477 Hörstel

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, PM 74-2 Straight Easy Plate Rollers autowash Baldwin Weko Powder Nedjyvkl Aepfx Ahvowd 76 Mios Machine is top condition, rollers changed in 2025. Without any damages

Condition: excellent (used), Year of construction: 2004, operating hours: 18,990,620 h, functionality: fully functional, paper width (max.): 520 mm, paper height (max.): 360 mm, type of input current: three-phase, Equipment: documentation/manual, The machine is with console and are also a two-way print. Nedpswa Ulzsfx Ahvowd

Condition: excellent (used), functionality: fully functional, You are bidding here on: a branded machine – bending brake from a very reputable and well-known manufacturer – Schechtl. Machine features: - Schechtl MA folding/bending brake - Bends cleanly – test available - Angle indicator - Bending length: slightly over 2m - Material thickness: up to 2 mm for steel sheets; for aluminium, zinc, etc., up to approx. 3 mm - Standard rail (radius rail for aluminium and zinc is available as an optional extra, as well as attachment and special rails) - Foot switch operation - Optional back gauge possible Nedpfxex Rupho Ahvswd Optional: - HT 200 guillotine shear or Schröder electric guillotine shear, 2m – 2.5 mm, can also be supplied on demand Important: Optionally, you can find and purchase a wide range of machines and accessories related to sheet metal and steel processing (such as bending brakes, guillotine shears, drilling machines, roll bending machines, slitting and profiling machines – as well as accessories like beading devices, roll sets for gutter production, rear gauges, etc.), as well as hand tools and spare parts from many leading manufacturers, directly from our shop. I am always available to answer your questions. You will receive an invoice according to §25a UstG (differential taxation); VAT is included in the invoice amount. Free loading is possible – weight approx. 1650 kg. Inspection and testing can be arranged by phone and are expressly encouraged. Payment in cash upon collection. Take advantage of our experience and technical expertise – we are happy to advise you. Collection by the buyer (or by a forwarding agent commissioned by the buyer) should take place within 10 days after the end of the auction.

Condition: used, Year of construction: 2013, total length: 4,110 mm, total width: 2,400 mm, total height: 2,100 mm, Weight: 7.250 kg Price: On request - Year: 2013 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: 607913428 - Drive system: CNC - Control system brand: Cybelec - Control system type: D-Touch-7 - Drive type: Hydraulic - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 3100 - Cutting speed [mm/min]: 15 - Throat depth [mm]: 150 - Backgauge type: Electric Nwjdpfx Ahsytgapevsd - Backgauge depth [mm]: 1000 - Finger guard: Fixed - Transport dimensions: 4110mm x 2400mm x 2100mm (l x w x h) - Transport weight [kg]: 7250kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2022, condition: used, Model: TJ-750 Suitable Sheet: PP/PS/PET Max. Sheet Width: 750mm Sheet Thickness Range: 0.35-2mm Screw Rod Dia.: 75mm Screw L/D ratio: 40:1 Main Motor Power: 110kw Total Power: 350kw Max. Output: 300-400kg/hr Power supply: AC 380V, 50Hz, Three-phase, Four-wire Dimension: L22500xW3200xH3600mm Nwsdpfx Asyvh Ubjhvjd Weight: About 15T

Condition: used, Year of construction: 1977, HEIDELBERG GTO 46+ NP • 1 color Nsdpfx Aoytb Hwshvswd • Plus version • 32 x 46 cm • Numbering and perforating unit • Complete with all tools, parts, and manuals • In production • Located: Germany • Available: immediately

Condition: used, Year of construction: 2007, operating hours: 74,000,000 h, MAN ROLAND 205 E0B • 5-color • Max. format: 520 mm x 740 mm • ProfitPlus Premium package including: - Double sheet feeder - Baldwin cleaning unit - Complete carton guide - EPL (Ergonomic Plate Loading) • Kersten antistatic system • Bacher register system • Powder sprayer: Grafix 72 Digital Plus • Alcosmart • PressManager Smart Interface • Smart R 200 Online • Remote control: RCI for ink and register • ColorPilot Smart • Automatic wash-up device for: - Ink rollers, impression cylinders, blanket cylinders • Electronic sheet feeding control • Nonstop delivery • Delivery-side control panel • JobCard Reader • Carton device • In production • Location: Germany Nsdpfx Asytb Egshvowd • Availability: immediately

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 721359, color channels: CMYK, paper weight (min.): 50 g/m², paper weight (max.): 400 g/m², paper width (max.): 36 mm, paper height (max.): 52 mm, Heidelberg Printmaster GTO 52-4 Offset Printing Machine (2006) For sale: Heidelberg Printmaster GTO 52-4, a reliable and high-quality 4-color offset printing machine manufactured in Germany. Model: GTO 52-4 Year: 2006 Serial Number: 721359 Configuration: 4-color (CMYK) Location: Azerbaijan Condition: Machine is in excellent working condition. Fully operational and well maintained. All new photos and videos are available. The machine is ready for inspection and testing at any time. Technical Specifications: Nwjdpfjyvdbpsx Ahvod Format: B3 (max sheet size 360 × 520 mm) Max print area: approx. 340 × 505 mm Speed: up to 8,000 sheets per hour Paper thickness range: approx. 0.03 – 0.4 mm Equipment and Features: Alcolor dampening system Manual plate clamping system Heidelberg inking unit with oscillating rollers Stream feeder with double-sheet control High pile delivery Powder spray unit Mechanical control system (simple, reliable, low maintenance) ink remote control Classic Center, single sheet feeder photoelectron. double sheet control, DDS film dampenings cooling unit Technotrans Alpha, quick plate clamping bars dry sprayer, + version Applications: Suitable for a wide range of commercial printing jobs including brochures, flyers, catalogs, business cards and other promotional materials.

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, machine/vehicle number: 718736, paper width (min.): 520 mm, paper width (max.): 410 mm, paper height (min.): 110 mm, paper height (max.): 510 mm, total length: 2,000 mm, total width: 1,200 mm, total height: 1,450 mm, space requirement length: 3,000 mm, space requirement width: 2,500 mm, space requirement height: 2,500 mm, counter reading (black): 25,000,000, counter reading (color): 30,000,000, year of last overhaul: 2026, type of input current: three-phase, input current: 220 A, input voltage: 25 V, Equipment: documentation/manual, The machine is in perfect working condition. Nwsdpfx Ajyt U N Sehved

Condition: used, Year of construction: 2002, total length: 3,700 mm, total width: 2,150 mm, total height: 1,900 mm, Weight: 6.000 kg - Year: 2002 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: A10347 - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 3000 - Throat depth [mm]: 200 - Backgauge depth [mm]: 1000 Nwedpfoyr Scgsx Ahvsd - Finger guard: Fixed - Transport dimensions: 3700mm x 2150mm x 1900mm (l x w x h) - Transport weight [kg]: 6000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Year of construction: 2001, condition: used, Erichsen Universal Sheet and Strip Testing Machine Model 145-60 Condition: Used Year of manufacture: 2001 Technical Specifications Hydraulic drive Motor power max.: 11.5 kW / 1500 rpm Pump output (small pump circuit): 12.3 dm³/min Pump output (large pump circuit): 31 dm³/min Test cylinder Nedpfx Ajyr R Uhjhvowd Punching force: 665 kN / 160 bar Hydraulic test head opening Max. operating pressure: 95 bar Holding pressure: 50 bar Drawing force ranges, switchable Small drawing force range: 37 kN / 10 bar Medium drawing force range: 225 kN / 60 bar Large drawing force range: 600 kN / 160 bar Max. drawing stroke: 150 mm Max. drawing speed: 750 mm/min Drawing ram stroke display: Resolution 0.1 mm Electrical connection values Power supply: 400 V three-phase, 50 Hz Fuses: 25 AT and 35 AT Ambient operating temperature: between +5° and +50° C Dimensions, weight Dimensions (L/W/H): 1800 mm / 1320 mm / 1400 mm Net weight: approx. 2400 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2020, operating hours: 854 h, year of last overhaul: 2025, Equipment: documentation/manual, Offered direct from first ownership: ----- THALMANN Double Folding Bending Machine – Model TD 150 – 6.4 m Series AB-SE - 6 –150 – S5 – DS 3000 / 1.50 mm (Re 275 N/mm²) DFT system ----- Nodpfx Aeyu Sbnjhvswd The machine was purchased new from Thalmann in 2020 and installed in our sheet metal workshop in 2021. With only 854 recorded pump hours, it has seen very little use and is therefore in excellent condition. The reason for sale is simply due to insufficient utilization of the machine. It can be inspected and tested at any time in the Munich area. Manufacturer: Thalmann Model: TD 150 - 6.4M Year of manufacture: 2020, 854 pump hours Condition: Excellent Category ID: 1472 Type ID: 1258 Machine type: Panel Folding Machine ---- Included additional equipment: - Freely running cutting unit, 1.5 mm steel, 1 unit - Curved clamping beam, ratio H x D = 1:2, 1 unit - Additional gripper/stop finger unit, 3 units - Clamping beams made from high-strength HARDOX steel, 1 unit - Hydraulic material thickness adjustment, 1 unit - Automatic sheet loading and handling table, 1 unit - Automatic sheet turning device, 1 unit - M-Guard remote maintenance support (instead of TeamViewer), 1 unit - LED bending line illumination with RGB color selection, 1 unit - Machine delivery, installation, and initial instruction, 1 service unit ----- If you have any questions or need more information, please feel free to send us a message or call us.

Condition: good (used), Year of construction: 2009, operating hours: 3,402 h, functionality: fully functional, machine/vehicle number: 2449-02, working width: 1,350 mm, type of input current: DC, overall weight: 6,000 kg, input voltage: 400 V, nominal power: 68 kW (92.45 HP), The machine is from 2009. Original price 200,000 CHF. Fully functional, with infeed table and dust extraction connection. Equipped with 2 sanding rollers and 1 disc for grinding and deburring. Various sanding belts included, as well as 1 disc for edge rounding. Condition as shown in the pictures. The machine has 3402 operating hours. It was only used for the processing of visible surfaces. Nwodpfx Ahsyu Hluevsd

Condition: good (used), Year of construction: 2012, only approx. 155 million impressions Prinect Press Center Preset Plus feeder Preset Plus delivery Autoplate WashStar Blanket cylinder washing device Impression cylinder washing device Nodpjyuxqcsfx Ahvewd Ink unit washing device CombiStar CAN open combination device for dampening circulation and inking unit temperature control, water-cooled Distributor roller remote adjustment PowderStar AP 500 High End powder unit CANopen CleanStar Compact Chamber blade system AirStar air supply cabinet, water-cooled StaticStar Compact antistatic device

Condition: excellent (used), Year of construction: 2002, RAS Multibend-Center RAS 79.26 Year 2002 Used RAS Multibend Centre CNC Folder Max working 2560mm Max sheet thickness (mild steel) 2.0 (2.5mm) Max sheet thickness (stainless steel) 1.5mm Max sheet thickness (aluminium) 3mm Finished part length min. (w/o corner tools) 200/250mm Finished part length (w. small corners) 380/430mm Nwsdjrxt Hqopfx Ahvod Finished part length min (w. large corners) 430mm / 480mm Finished part width min. (inside) 150 (140mm) Finished four sided part height max 203mm Side free space corner tools (small/large) 30/ 50mm Folding beam travel range 180 Deg Working height 1000mm Machine width 7700mm Machine length 5800mm Machine max height 2400mm Weight approx 17000kg Drive power 25kw

Condition: excellent (used), functionality: fully functional, Year of construction: 2003, control type: CNC control, actuation type: electric, controller model: System 6000, working width: 3,200 mm, type of crowning: CNC-controlled, sheet thickness (max.): 3 mm, sheet thickness steel (max.): 3 mm, back gauge: 3,000 mm, Equipment: CE marking, emergency stop, Used Ras Flexibend 73.30 Cnc Folding Machine For Sale with 3metre back gauge Motorized Swivel Bending Machine Make: RAS Model: Flexibend 73.30 Year of Manufacture: 2003 Technical Specifications Manufacturer: RAS Model: 73.30 Year: 2003 Useful bending length: 3200 mm Nwedsw T Sc Aspfx Ahvod Sheet thickness: 3.0 mm Upper beam opening width: 300 mm CNC adjustable bending beam travel, max.: 80 mm CNC adjustable lower beam travel, max.: 80 mm Speeds: Bending beam, max.: 90 degrees/sec Upper beam, max.: 40 mm/sec Back gauge 10–1550 mm: 2 sec Equipment • Control: Touch & More System 6000 - NEW TOUCH SCREEN FITTED • CNC-controlled back gauge, 3metre J version / J shape back gauge • Motorized lower beam adjustment and bending beam adjustment • Support table A good selection of tooling, segmented and full length

Condition: excellent (used), Year of construction: 2001, sheet thickness (max.): 2 mm, sheet thickness steel (max.): 2 mm, working width: 1,850 mm, working range: 1,850 mm, 1 Used Salvagnini cnc automatic panel bender for sale cnc folder P4.1812 Servo-controlled panel bender LS Upper bending blade LI Lower Bending blade MLA.ZR Manual length Adjustment of Blankholder CLA Long Tab Bending Unit HP12015 R81 Chiller Max. length at entrance: 1850mm. Max. width at entrance: 1500mm. Njdpfxowb E Uvo Ahvowd Minimum length at entrance: 285mm. Minimum width at entrance: 190mm. Maximum diagonal: 2150mm. Maximum width at exit: 1500mm. Maximum reference dimension: 2000mm. Minimum sheet thickness: S min: 0,50mm. Maximum sheet thickness, Mild Steel (max. 410 N/mm2): Max: 2,00mm Maximum sheet thickness, Stainless steel (max. 600 N/mm2): Max. = 1.25mm Processing of pre-painted material Smax= 3,00mm. Maximum tool length for CLA option: 1000mm.

Condition: excellent (used), Year of construction: 2002, RAS Multibend Center 79.22 Automatic cnc FOLDER / Panel bender Nodpferxt Axsx Ahvswd Year 2002 Specifications • Working Length: 2160 mm/ 7.09’ ft. • Maximum Sheet Metal Thickness: Steel – (400N/mm2) 2.0 mm • Maximum Sheet Metal Thickness: Stainless Steel – 1.5 mm • Maximum Sheet Metal Thickness: Aluminum – 3.0 mm • Maximum Development Sheet Width: 1500 mm/ 4.92’ ft. • Maximum Four-Sided Fold Height Max: 203 mm • Bending Blade Reach: 180 ° Degrees • Machine Width: 5500 mm approx./ 18.04’ ft. approx. • Machine Length: 7000 mm approx. / 22.97’ ft. approx. • Machine Height: 2500 mm/ 8.20’ ft. Power: 18 kW Frequency: 50hZ Pressure: 6 Bar Weight: 21,000 kg/ 46,297 lbs. approx.

Condition: excellent (used), Used Gecam - Euro Fintec 128 steel tube linisher / sander / polishing machine for sale Nodpfx Aowbh Dyshvswd Fintec 128 Tube finishing machine for sale Can be viewed under power with your steel tubes

Condition: excellent (used), Beading machine / edge forming machine from the renowned German manufacturer Weberwerke Siegen. The machine is designed for beading, edging, and forming beads (sickening) on the edges of sheet metal panels. Its solid, heavy cast iron construction ensures stable and precise operation. The open "C"-frame allows for the processing of large sheets and long components. The electric drive with a large flywheel guarantees smooth operation and sufficient torque for sheet metal forming. Pressure and roller guidance are mechanically adjustable. Nsdpfsyga T Nox Ahvewd Specification from the nameplate: • Type: BM 4 • Year of manufacture: 1952 • Working width: up to 1250 mm • Sheet thickness: up to approx. 4–5 mm (depending on material) • Material strength: Gb = 45 kg/mm² The machine is not a shear – it does not cut sheet metal, it is solely intended for forming operations. Used condition, complete, visible signs of use consistent with age. Ideal for metal workshops, tool rooms, maintenance departments, as well as restoration tasks and small batch or bespoke production.

Year of construction: 2008, operating hours: 3,575 h, condition: ready for operation (used), General Data Measurements height 1300 mm This OMSG CAPRI 9/13 M was manufactured in 2008. It features a working area with dimensions of 900 mm by 1300 mm and a suspension load capacity of up to 2 x 500 kg. Equipped with 2 x 5.5 kW turbines, replaceable blasting area armor, and a screw-driven blasting material collection system. It also includes an elevator, grain cleaning system, and a control cabinet-operated suspension movement. Contact us for more information about this machine. Nwjdsx Sz D Ispfx Ahvsd Application Types Other Sheet Metal Machinery

Year of construction: 2000, condition: ready for operation (used), This Manni Sandwich Panel Production Line was manufactured in 2000. It features a discontinuous line for sandwich panels with a polyurethane core, including profiling, injection, pressing, cutting, stacking, and packaging stations. Main components include a Manni PMC 291 T press, Cannon H100 RF2 polyurethane injection system, and various Tresam profiling lines. Consider the opportunity to buy this Manni Sandwich Panel Production Line. Contact us for further details regarding this machine. Application Types Other Sheet Metal Machinery Nsdpfex E Ef Nox Ahvowd