Used Sheet Offset for sale (8,896)

Condition: used, Year of construction: 1989, Technical details: plate width: 1600 mm plate thickness: 20 mm Nsdpoyvfy Tjfx Ahvewd smallest sheet thickness: 6 mm Number of Straightening rolls: 11 straightening roll diameter: 180 mm straightening feed: 10 m/min connected load: 76 kW total power requirement: 75 kW weight of the machine ca.: 39,2 t

Condition: good (used), functionality: fully functional, Inking unit/numbering unit for Heidelberg SM 52 offset printing machine, including numbering device shaft and 4 numbering units with forward counter plus cross perforation. Nsdpsyvftaefx Ahvowd

Condition: like new (used), functionality: fully functional, degree of automation: manual, actuation type: manual, working width: 1,000 mm, Load capacity: 6 t Coil inner diameter: 450-550 mm Coil outer diameter: 1000 mm Stand weight: 150 kg The device must be manually inserted into the inside of the metal coil; the four support arms can then be tensioned in place using the winding handle. Strong tensioning is aided by the structural design and a thrust bearing mounted behind the clamping nut. With the device fixed in place, the metal coil can be lifted to the decoiler stand by crane or forklift. The sheet metal can be continuously unwound from the stand with a suitable pulling machine, while overrun is prevented by an adjustable disc brake. Decoilers are also available new at a price of 1,440,000 HUF + VAT. There are 3 units for sale, price: 700,000 HUF / unit (1770 EUR) + VAT. Nwedpfx Ahsyww Hpsvjd

Condition: used, We offer these used sheet metal roofing panels. Suitable for covering sawn timber or similar materials. 1.30–1.90 m – €200 per unit – 4 units available 2.00–2.90 m – €300 per unit – 4 units available Nsdsywuymopfx Ahvewd 3.00–3.90 m – €350 per unit – 9 units available 4.00–6.00 m – €400 per unit (4.5 m: 10 units; 5 m: 11 units; 6 m: 11 units) Prices exclude VAT. If you have any questions or need more information, feel free to send us a message or call us.

Condition: like new (used), Year of construction: 2023, operating hours: 58 h, functionality: fully functional, machine/vehicle number: 6523036, working width: 650 mm, sheet thickness aluminum (max.): 150 mm, warranty duration: 12 months, grinding width: 650 mm, GECAM G65RRR Surplus to requirements with only 58 hours working time This machine has been re-configured to have one abrasive belt and two subsequent ScotchBrite barrel brushes ideal for processing smaller sheet metal profiles. 650mm processing width Tampico cleaning brushes on the back end of the conveyor also included. Dust extractor not included but options can be discussed Machine widely used in the automotive sector at manufacturing sites supplying BMW etc Nodpfx Ahownukmjvswd 6 months free abrasive belt supply from Finishing Aids and Tools Ltd for this machine (5 belts per position per month) For a full quotation, technical information or any questions you might have about this machine please contact us

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, used Timesavers Model 22-Series-900-WB - DEMONSTRATION MACHINE - The machine is powered up and can be inspected by appointment! Technical data: Year of manufacture: 2023 Max. working width: 900 mm Table opening: 1 - 125 mm Conveyor speed, frequency-controlled: 2.5 - 14 m/min Electrical: Conveyor motor, frequency-controlled: 1.5 kW Table adjustment motor: 0.37 kW Electrical connections: 400 V Frequency: 50 Hz Control voltage: 24 V Total power: 28 kW Compressed air: Required air pressure: 6 bar Total air consumption: 20 l/min Nwodpfx Aoyu Tfhjhvjd Total dedusting capacity: Required extraction capacity at 100 mm WG: 3,000 m³/h W Unit: Roller unit Contact roller assembly, Ø150 mm Contact roller rubber hardness 45° Shore Abrasive belt speed: 11 - 22 m/sec Abrasive belt size (L x W): 1,900 x 930 mm Total power W Unit: 15 kW B Unit: Brush unit Brush Ø200 mm Oscillation: 110 H/min Main motor: 11 kW Total power B Unit: 11 kW Machine version according to CE door switch Emergency stops at infeed and outfeed of machine Unpacked machine weight: 2,060 kg Dimensions (L x W x H): approx. 1700 x 2000 x 2400 mm

Year of construction: 2003, condition: ready for operation (used), Built in 2003 Size max 300 x 300 mm min 100 x 100 mm Nwedpfxedybiio Ahvsd Speed max 2.100 Pack./h Weight 160 kg (approx.)

Condition: good (used), Format: max 720 x 1,040 mm; min 360 x 520 mm Thickness (sealed materials): max 0.5 mm; min 0.06 mm Total dimensions (W x H x L): 3,340 x 8,960 x 2,175 mm Weight: 26,920 kg Nwedsqrqwmepfx Ahvjd Equipment - Steel plate feeder & delivery - Unimatic C3 remote control - Automatic color adjustment via the control panel - Lateral, linear and diagonal register from computer - Powder applicator Perfecting - 2/2-4/0

Condition: good (used), Type of pallet: Euro pallet max height of pallet 1450 mm (incl. pallet) Electrical: 380 VAC, 3 PH, 50 Hz, 5.5 kW Dimensions (L x W x H): appr. 7500 x 1200 x 400 mm Weight: ~1000 kg Configuration: straight pallet conveying Modules: Position for two stacks of empty pallets Nsdpfx Ahjtrxrbovswd - separation of pallets - palletizing position - pick-up position for full pallets

Year of construction: 1988, condition: ready for operation (used), top sheet hopper feeder Built in 1988 Nsdpod Ad Nljfx Ahvswd

Condition: ready for operation (used), Year of construction: 1997, 8-Farb-Bogen-Offset 8-col.sheet-fed offset presses Built in 1997 Nwjdpfx Ahsygwbdjvjd Size max 520 x 740 mm min 210 x 280 mm Image area max 510 x 740 mm Speed max 15.000 c/h Pile height feeder 945 mm Pile height delivery 1.000 mm

Year of construction: 2009, condition: good (used), Rebuilt: 2009 Njdpfsdyk Rpsx Ahvewd Size: 700 x 500 mm Speed: 4.000 c/h Equipment: • hand fed station • 15 stations

Condition: good (used), functionality: fully functional, Year of construction: 2006, machine/vehicle number: 262061, control type: manual, degree of automation: manual, actuation type: manual, working width: 1,000 mm, installation height: 130 mm, sheet thickness (max.): 2 mm, overall weight: 380 kg, total length: 750 mm, total width: 1,540 mm, total height: 1,265 mm, Standard equipment Patented eccentric quick-clamping system for tool change on the upper and bending beam with just one hand movement Two-stage upper beam drive for two different tool heights Gooseneck rail, 130 mm high, 30°, sharp, clearance 26 mm, foot width 41 mm, free passage 110 mm, segmented incl. corner pieces, 700 N/mm² Lower beam rail, segmented, plug-in system with corner pieces, 700 N/mm² Bending rail 15 mm, segmented incl. corner pieces, 700 N/mm² Tool segmentation for 1000 mm: 30/50/70/100/150/200/300 mm + 2 x 75 mm corner pieces, for greater lengths additionally 250 mm segments Nwsdeywfq Nepfx Ahved Upper beam stroke 110 mm Bending angle display Foot pedal mechanism for opening and closing the upper beam

Condition: used, Hydraulic guillotine shears SAGITA - MANURHIN - License BEYELER Type 2550 x 6 Machine. No. 00682 Year of construction 1980 Cutting length 2520 mm Cutting thickness 6 mm Backgauge 750 mm Cutting angle adjustable Hydraulic pressure max. 290 bar Motor power 11 kW Mains connection 400 Volt, 50 Hz - Back gauge with motorized adjustment and mechanical actual value display, fine positioning via handwheel - Manual cutting gap adjustment - Infinitely variable cutting length adjustment - 11 pieces hydraulic sheet metal hold-down device Njdpfx Aet Ac D Ushvewd - front angle fence left 1300 mm - 3 front table extensions 1300 mm - electric foot switch - very solid and torsion-resistant welded construction - 1 set of replacement blades - slightly damaged (blade length 2550 mm) - operating instructions Space requirement with table supports L x W x H 3200 x 2800 x 1600 mm Space required for transportation L x W x H 3200 x 2150 x 1600 mm Weight 6300 kg Good condition

Condition: used, Year of construction: 2008, Cutting bench, cutting shear Type: Hydraulic Manufacturer: Colmal Type: HS 40-13 Year: 2008 Controller: Delem DAC-350 Cutting width: 4050 mm Max. thickness: 13mm Incl. documentation and peripherals Incl. outfeed-conveyor Machine dimensions: 4800x2400x2650mm Machine weight: 15000kg - Year: 2008 - Documentation available: No Nedpfx Ajwng Rxehvewd - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 1986, Cutting bench, cutting shear Type: Hydraulic Manufacturer: Darley Type: GS 3100x13 Year: 1986 Control: Conventional Cutting width: 3100mm Cutting thickness: 13mm Electric Backgauge Motor-power: 22kW Incl. frontloader-arm Total dimensions: 3750x1900x2150mm Machine-weight: 10000kg Nedpfxswnh Nce Ahvewd - Year: 1986 - Documentation available: No - CE certificate present: No Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, We offer this very good RYOBI 522HE offset printing press, year of construction 2004. Semi auto plate loading, One owner from new. Very clean machine. If you have any questions or need more information, feel free to send us a message or give us a call. Nwedpoywaq Refx Ahvod

Condition: used, Year of construction: 2019, We offer this used OMET X6 530 flexographic printing press, year of construction 2019. Manufacturer: OMET S.r.l. Model: X6 530 Serial Number: 2188 Nsdpfx Aheyfh Aiovswd Year of Construction: 2019 Machine Type: web press If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 2021, total length: 3,850 mm, total width: 2,350 mm, total height: 1,560 mm, Weight: 5.500 kg - Year: 2021 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Serial number: 27869 - Drive system: CNC - Control system brand: Cybelec - Control system type: Cybtouch-8W - Drive type: Hydraulic - Configuration: Swing-beam - Power [kW]: 12.5 - Max. sheet thickness [mm]: 6 - Max. working width [mm]: 3100 - Cutting speed [mm/min]: 20 - Backgauge type: Electric - Backgauge depth [mm]: 1000 - Sheet support system: None - Finger guard: Fixed - Angle adjustment: Motorized - Blade gap adjustment: Manual - Table type: Ball-bearing table - Transport dimensions: 3850mm x 2350mm x 1560mm (l x w x h) - Transport weight [kg]: 5500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Njdpsx R R Tcsfx Ahvjwd Lukas van Rossum

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, STC-Ref:G-022-7695 Heidelberg SM-52-2 ,Year: 2012 ,Impressions: approx. 27 Mio. format: 370x520 mm, 2 colors equipped: - Minus-version - powder sprayer Mediprint - Technotrans alpha cooling, metering unit - Alcolor Automatic film dampening - Autoplate: semi-automatic plate change system - Cptronic - ink-roller wash device managed from console - wash device for impression cylinders - blanket wash-up device - electronical double sheet control - chromed cylinders Nodpfoyv E Hhjx Ahvewd --> available: 04/2026

Condition: used, GTOVP 52 4-colour offset press Sheet size 360x520 mm Detailed info coming. Nodpfxoyv D D Ss Ahvewd

Condition: used, Year of construction: 2015, Eight-color offset printing press with perfecting device for double-sided printing, sheet format 75 x 106 cm, model HEIDELBERG SPEEDMASTER XL 106-8-P Nwjdsyv A Hfopfx Ahvjd Year of manufacture: 2015 Impressions: 230 million

Year of construction: 2009, condition: good (used), functionality: fully functional, machine/vehicle number: 0-286-21-0481, BARGSTEDT automatic panel storage system Base area: 26 x 10.5 m Overall height: 3.75 m (to top edge of crane) Stacking height: max. 2.5 m The storage system can be used for flexible feeding of a panel saw, a nesting machine, or as a convenient panel warehouse with automatic retrieval. Storage positions are freely programmable. Nwodeyv Axnopfx Ahvjd Important: The control software was updated in 2019 to TLF woodStore, version 7.12.6.0.

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, sheet thickness steel (max.): 2 mm, sheet thickness aluminum (max.): 3 mm, Technical features: Maximum working length 2160 mm Maximum sheet thickness (steel 400 N/mm2) 2.0 mm Maximum sheet thickness (stainless steel) 1.5 mm Nsdjrwxkhspfx Ahvewd Maximum sheet thickness (aluminium) 3.0 mm Maximum sheet width of development 1500 mm Maximum height of bending on four sides max * 203 mm Bending blade action radius 180 degrees Machine width approx. 5500 mm Machine length approx. 7000 mm Machine height 2500 mm Total weight 23000 kg Power 25 kW Frequency 50 Hz Pressure 6 bar Loading system Blank Feeder with portal

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 1 h, functionality: fully functional, RISOGRAPH SF9350 EII A3 showroom machine with base cabinet and consumables. Nsdpfx Aoyvuzujhvewd