Used Sheet Leveling Machine for sale (94,499)

Condition: good (used), Year of construction: 1980, Hydraulic sheet metal bending machine, working length 3000 mm Lsdpfx Abew El R Ee Ujhn

Condition: excellent (used), Year of construction: 2025, Timesavers Series 10 Manuel Ginder The machine is a demonstration machine which was used occasionally for demonstrations. Easy to operate and pleasant to ride. Rubber carpet with good grip and additional vacuum field for small parts. Lhjdpfefhb N Sox Ab Ujn Speed infinitely variable. The machine is in our warehouse and can be viewed at any time under power, tested and accepted.

Condition: reconditioned (used), Year of construction: 2017, operating hours: 3,862 h, functionality: fully functional, Used machine Year of manufacture: 2017 General Specifications: Max. working width sanding belt unit: 1350 mm Sanding belt dimensions (W x L): 1380 x 1900 mm Outside brush diameter: 350 mm Table opening: 0 – 100 mm Minimum workpiece size: 50 x 50 mm Feed speed, frequency-controlled: 0.5 – 8 m/min Electricity 1st Unit – W – sanding belt: 11 kW 2nd Unit – RB – rotary brush unit: 1.5 kW Brushes: 4 x 1.5 kW (6 kW) Feed motor, frequency controlled: 2.6 kW Vacuum pump: 15 kW Electrical connections: 400 Volt Frequency: 50 Hz Compressed air only for sanding belt unit Required air pressure: 6 bar Consumption: 160 l/min Dust extraction at 100 mm WS Sanding belt unit: 2000 m³/h Vacuum pump: 1500 m³/h Weight: approx. 6000 kg Includes one set of brushes and starter set of sanding belts. Ledpfxew Dzyte Ab Uohn New extraction system optionally available. Machine has been technically overhauled (conveyor belt and bearings are new, value approx. €20,000) Immediately available.

Condition: used, Year of construction: 2019, operating hours: 2,120 h, functionality: fully functional, machine/vehicle number: SN026032, The machine was used in our own production facility in Bad Wurzach, Equipment: mold | mold closing compensation | camera set. As a package with 2 conveyor belts and a WDE 3002 wet extraction unit. Further information on request. The SBM-XL S2B2 grinding and deburring machine is designed for edge rounding and oxide layer removal on both sides of steel parts and stainless steel in a single operation. The LISSMAC system is suitable for processing laser parts. Technical data SBM-XL S2B2: Passage width: max. 1500 mm Processable sheet thickness: 0.5 - 50 mm Load capacity: 300 kg/lfm Voltage: 400 V / 50 Hz Lhodpfx Abst Tx Dxs Ujn Mains form: 3~ PEN / 3~ PE+N Rated current: 74.3 A Rated power: 33 kW Protection class: IP 42 Infinitely variable feed: 0 - 4 m/min. Sheet thickness adjustment: electric Tool setting: electric Weight: approx. 4200 kg Dimensions (W/D/H ): approx. 3600/2100/2000 mm

Condition: ready for operation (used), Year of construction: 2009, functionality: fully functional, machine/vehicle number: 2316-01, working width: 600 mm, Type 41 Series 600 WRD Working width 600 mm Lhodpfxer Nbpbe Ab Uon Ideal machine for deburring and finishing of metal products Equipped with grinding belt and disc/brush aggregate

Condition: new, Year of construction: 2025, functionality: fully functional, working width: 600 mm, sheet thickness (max.): 120 mm, workpiece height (max.): 120 mm, grinding width: 800 mm, The grinding and deburring machine offers an efficient solution for processing laser- and plasma-cut parts. These high-quality machines ensure excellent processing by rounding the edges of the parts and removing burrs, resulting in a significantly improved surface quality. Using the latest technology, our machines comply with all relevant CE directives and guarantee the highest safety standards. The user-friendliness combined with a robust design enables smooth integration into your production processes. With our grinding and deburring machine, you not only optimize processing times, but also increase the precision and durability of your products. Benefit from high-quality processing and increase your production efficiency. Ljdpfx Aowzv E Esb Uohn

Condition: used, Year of construction: 2008, working width / mm workpiece height / mm / Workpiece thickness: 1-70 mm Min. workpiece length: 350 mm Min. workpiece length with magnetic or vacuum track: 80 mm Band filter unit volume Ab=900 approx. 350 l Band filter unit volume Ab=1400 approx. 400 l Working height constant 1000 mm Feed speed 2/4 m/min Feed speed stepless 1.5-8 m/min Operating voltage 400 VAC Control voltage 24 V DC, 230 VAC Frequency 50Hz Compressed air connection R 3/8" Minimum compressed air pressure 5 bar Minimum compressed air volume EMSN II +2F 10 NI/min Minimum compressed air quantity EMSN II /L +2F 80 NI/min Overall electrical connection See installation plan Weight of the machine working width 900 mm approx. 4200 kg Weight of the machine working width 1400 mm approx. 5100 kg Weight of the machine working width 1540 mm approx. 5600 kg Sandpaper dimensions sanding roller AB=900 1540 mm long x 900 mm wide Lhodoinwwzepfx Ab Ujn Sandpaper dimensions sanding roller AB=1400 1540 mm long x 1400 mm wide Sandpaper dimensions sanding roller AB=1540 1540 mm long x 1540 mm wide SERIOUS Automatic sheet metal deburring machine with wet grinding device Type EM 5 N/II/L + 2 F 1400 Year of construction 2008 Factory - No. 780063 Machine/Equipment: Sheet metal deburring machine using the wet ship process for stamping, laser and nipple parts of different materials with flexible grinding roller, as well as 2 flap brushes for particularly high edge rounding and 2 Spring steel brushes for oxide removal (worn out) The machine is equipped with a continuous conveyor belt for the Workpiece transport equipped. Effective working width: 1380mm Minimum workpiece length: 350mm Special equipment: •Vacuum suction system 300mm wide, for non-magnetic small parts Minimum length of 80mm, with a minimum area of ??200cm² •Magnet track 300mm wide Minimum length of 80mm, with a minimum area of ??40cm² •Frequency converter for stepless feed & speed regulation •various Abrasives as accessories

Year of construction: 2020, condition: ready for operation (used), Control Unit Brand FANUC Model Series 30i model B This FICEP GEMINI G32 HPE was manufactured in 2020. It is an Automatic Gantry Line for Drilling, Milling, and CNC Thermal Cutting of Large Sheets. Key features include a single-spindle vertical drilling head, an 8-position automatic tool changer, and a high-capacity XPR300 plasma cutting system. Ideal for handling sheets up to 15,000 mm in length and 3,100 mm in width. Contact us for more information about this machine. Application Types Other Sheet Metal Machinery Lodpfowrudzox Ab Uohn

Condition: ready for operation (used), Year of construction: 2017, operating hours: 7,464 h, functionality: fully functional, machine/vehicle number: 0041, feed length X-axis: 400 mm, feed length Y-axis: 400 mm, feed length Z-axis: 600 mm, workpiece weight (max.): 20 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Work area Cubic travel area: 400 x 400 x 400 mm Electromechanical adjustments Adjustment in Z-axis: up to 600 mm manually Travel in X,Y axes: ±200 mm each Rotation around A or B axis: ±45 degrees each Adjustment speed: 1 m/s Load capacity: 20 kg Operation Control: BOSCH REXROTH Connection data Connected load: 21 kVA Lodpfxjwrr Tye Ab Uehn Operating voltage: 400 V

Condition: like new (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: SN040890, working width: 1,350 mm, sheet thickness (max.): 120 mm, total length: 3,300 mm, total width: 2,170 mm, total height: 2,260 mm, workpiece weight (max.): 500 kg, overall weight: 5,200 kg, input voltage: 400 V, warranty duration: 12 months, protection type (IP code): IP42, input frequency: 50 Hz, input current: 56 A, GRINDING AND DEBURRING MACHINE FOR HEAVY PLATE. SLAG REMOVAL, DEBURRING, EDGE ROUNDING | Equipment: Tool, magnetic track, conveyor belt cleaning brush, internal lighting, ME 5000, ID key switch, camera set, LiServ, energy measuring package. Available from October 2025. | Lodpfxewza Uds Ab Uehn SMD 335 DRE - P Edition Passage width 1350 mm Processable material thickness 1.0 – 120 mm Load capacity 500 kg/m Voltage 400 V / 50 Hz Power supply 3 + PE / 3 + PEN Rated current 56.0 A Rated power 25.5 kW Protection class IP 42 Feed rate stepless 0.3 – 8.0 m/min Weight approx. 5200 kg Dimensions (W/D/H) approx. 2170/3300/2260 mm

Condition: excellent (used), Year of construction: 2005, Metal sander COSTA MOD. MA CCC 1150 Year of construction 2005 CE. Complete with nr. 3 abrasive belts. Sheet metal passage: mm 1150. Power: 40 kw. Lhjdjv Uqb Aopfx Ab Usn Working machine.

Condition: ready for operation (used), Immediately available from the customer's factory (machine in use) Subject to prior sale and availability PLATE-EDGE-MILLING-MACHINE / PLATE-EDGE-MILLING-MACHINE PLATE-EDGE-MILLING-MACHINE MADE BY / MADE BY MODEL / TYPE YEAR OF PRODUCTION/ NEW 1984 approx./approx ZUSTAND/CONDITION Betriebbereit / ready for use LIEFERZEIT / DELIVERY-TIME SOFORT / IMMEDIATELY Längsvefahrweg X Travel longitudinal X 15,900 mm Horizontal feed Z Horizontal travel feed Z 790 mm Vertical feed Y Vertical travel feed Y 500 mm Swivel range of milling spindle Swivel of milling spindle +/- 45 °/degrees Drive power Power 50 kw Lsdpovdx S Ujfx Ab Ujhn Milling spindle diameter Milling spindle dia 160 mm Tool holder Taper ISO 50 DIN 2079 Spindle speeds stepless Spindle speeds stepless 50-500 rpm Weight of machine Weight of machine 23.000 Kg

Condition: like new (used), Year of construction: 2021, functionality: fully functional, working width: 1,350 mm, Grinding and deburring machine COSTA MD5 CVC 1350 Grinding, deburring, edge rounding and finishing of serial components Year of manufacture: 2021 Lhedpfxswq Dnms Ab Ujn Control: Costa Operating hours: rarely used Technical data: Free-standing machine Working height: variably adjustable from 0.5 mm to 150 mm Working width: 1350 mm Max. part weight: 400 kg Length of wide belt grinding belts: 2620 mm Constant table height, feed via grinding units Intuitive PLC control for creating, saving and retrieving programs Electromechanically positionable grinding units in 0.01 mm increments Accessories: - Extraction: Wet separator extraction unit W 4000

Condition: excellent (used), Product Information "POLY-PTX 800 satin finishing machine" From the inventor of the longitudinal sander. Our multifunctional longitudinal sander with 1750 watts of power, speed control, ergonomic design and versatility - including up to 150 mm working width. High torque and power reserves guarantee professional, continuous use and greater profitability. Features: Infinitely variable speed control from 1000 to 3800 min-1 with a tachogenerator to ensure constant speed even under load. Grinds from coarse to fine. Balanced, simple manual guidance without support rollers. This allows free movement (oscillation effect). Guarantees shadow-free, seamless, highly decorative surfaces in satin, matte and industrial finishes. It satin polishes to a mirror shine and refines the surfaces of stainless steel, steel, non-ferrous metals such as brass, bronze, copper, aluminum, as well as wood. Finest sanding on large surfaces, without shadows or edges. Removes welds, deep scratches, rust, dirt, layers of paint and oxides. Goes from coarse grinding to mirror shine on stainless steel and non-ferrous metals in just three steps. It's also ideal as a round tube grinder using a sanding belt roll. Ljdpfou Su Tzsx Ab Ujhn Grinds and polishes open and closed pipe structures. For pipe processing, the "hole system" allows safe and fast bonding of fleece and felt tapes to closed pipe structures. It does not require complex tape bonding. Huge range of grinding tools , which offers a solution for every task. With rubberized handle for optimal handling! Set contents: 1 POLY-PTX® 800 basic unit 1 robust, impact-resistant plastic carrying case 1 QUICK-LOCK cable 4 m 1 POLY-PTX® mounting screw 1 fleece disc 100 mm wide Machine type: Satin finishing machine Cable/battery: Cable Suitable tools: Brushes, bushings, polishing rings, wheels Plug type/power connection: EU (C+F) 220-240 V ~ 50-60 Hz Power consumption: 1750 watts Max tool size: Diameter 115 x width 100 mm Tool holder: 19mm spline shaft WEEE Reg. No.: DE 51395731 Speed in min-1: 1000 - 3800

Condition: like new (used), Year of construction: 2019, 2 sanding units with inverter predisposition for 3rd unit Suction table Working width 950 mm Lsdpfxowqrtqo Ab Ushn

Condition: used, Year of construction: 2009, machine/vehicle number: 23343509, Vollautomatische Hochgeschwindigkeits Kaschiermaschine / Fully automatic Sheet-to-Sheet Laminating machine Lamina Blackline Auto 1110 Year 2009 - Serial-No. 23343509 Format max. 1100mm (width) x 1600mm (length) Sheet Width min. 350mm (13¾”) Sheet Length min. 350mm (13¾”) Feeder Capacity Top feeder: 500 mm (20”) Bottom feeder: 800 mm (32”) Speed 5000 sheets / hour Top Sheet 130 to 450g/m2 1 pts = 28,25g/m2 Bottom Sheet From 250 g/m2 to 10 mm (0,39”) 1 pts = 28,25 g/m2 Corrugated from 0,6 - 10 mm (0,016” - 0,39”) Lhedpfx Asq Rx Svsb Ujn Registration Accuracy* Up to 0,2mm (0,008”) Total Installed Power 5,0 kW Electrics 208 V, 3 phase, 60 cycle; or 400 V, 3 phase, neutral, 50/60 cycle; or Specified Air Requirements 6 bar; 80 psi; 34 CFM, Approximately 500 L/min Machine size (widthxlength) 2050mm x 460mm - weight 2800kgs Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: used, Year of construction: 2007, Lissmac SBM-GS The grinding and deburring machine is suitable for double-sided processing of workpieces made of steel or stainless steel. Sheet metal parts, stamped parts and laser parts can be processed optionally on the top, bottom or both sides in a single pass. The machine is supplied complete with extraction system. Working width: 1000 mm Workpiece thickness – max.: 0.5 - 80 mm Abrasive belt width: 60 mm Machine weight: 4,027 kg Dimensions (W/D/H): 3260 / 1500 / 1800 mm Voltage: 400 V / 50 Hz Mains type: 3~ PEN / 3~ PE+N Rated current: 110 A Rated power: 49.9 kW Protection class: IP 42 Infinitely variable feed: 0-4 m/min Lodpowwgwkjfx Ab Uohn

Condition: good (used), Year of construction: 2011, Edging and contouring - deburring machine ROLEI Type: 00645-KKE2 Year: 2011. Lhjdpfx Abownpflo Ujn

Condition: good (used), functionality: fully functional, Technical specifications: - Working length of rolled sheet: 2000 mm - Thickness of rolled sheet: 8 mm - Thickness of bent sheet: 12 mm - Roller diameter: 300 mm - Yoke opening: hydraulic - Total power consumption: ~ 28 kW Lhjdpfx Abowug Aue Usn - Hydraulic unit: 0.75 kW - Adjustment motors: 2 x 7.5 kW, 700 rpm - Main electric motor: 11/5.5 kW, 1460/735 rpm - Hydraulic adjustment pressure: 3 MPa - Machine dimensions (L x W x H): 5600 x 1450 x 1830 mm

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, Hydraulic Bending Machine Jorns CH-4932 – 8 meters Type: MAXI-MULTI-LINE-200-SM-CNC400A-8 Year of Manufacture: 2000 Technical Specifications: - Working length: 8 meters - Installed power: 11 kW Lsdpfjwt Eikex Ab Ushn

Condition: new, Timesavers Series 12 WW The machine is equipped with two belt grinding stations; with station 1 you can perform pre-grinding to remove high burrs and splatter, and with station 2 you can achieve a surface finish on the part. The transport speed of the belts is continuously adjustable. The table opening can be adjusted from 0.8 to 100 mm. Ledpfx Abswqf U Uo Ushn

Condition: used, Year of construction: 1988, machine/vehicle number: 50531, Vorsatzklebemaschine - End Sheet Tipping machine Hunkeler VEA 400Year 1988 - Serial-No. 50531/10 Size min. 100x70mm - max. 420x310mm Lodpoh Axf Uefx Ab Ujhn Speed 1200-6800 Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Condition: new, Sheet width 1250 mm sheet thickness 5,5 mm bending 5,0 mm roll length 1280 mm smallest diameter 210 mm roll diameter - top 140 mm weight 1365 kg dimension L-W-H 2.020 x 900 x 1.200 mm Standard equipment: - Central rolls driven by electric motor, rotary reduction gear and gear drive - Top roller can be swung out to the side Ljdpfx Ashcw Rxsb Ujhn - Main motor with braking device - Conical bending device - Mobile control panel and foot pedal - CE mark/declaration of conformity Special equipment: - motorized rear roller adjustment - digital display for rear roller - induction hardened rollers

Condition: new, bending length: 1250sheet thickness: 3upper roll diameter: 90 Technical specifications: - Cast iron body - By manuel or motorised (optional) bending - Opening top roll to side after bending for taking out the material easily - Cone bending device - Movement of the back and bottom rolls up and down manually with hand wheel - Portable control panel in order to control material from required  locations with foot pedal  - In acccordance with CE norms. Options: - Back roll with motor  - Digital readout for displaying position of the backroll - Body cover EURO 314,-- - Hardened rolls EURO 550,-- - Variable speed of rotation  We have many references! Lhodod Ab Tyopfx Ab Usn

Condition: new, bending length: 1550sheet thickness: 2.5upper roll diameter: 90 Technical specifications: Lhodpfxsd Ab Twj Ab Uen - Cast iron body - By manuel or motorised (optional) bending - Opening top roll to side after bending for taking out the material easily - Cone bending device - Movement of the back and bottom rolls up and down manually with hand wheel - Portable control panel in order to control material from required  locations with foot pedal  - In acccordance with CE norms. Options: - Back roll with motor  - Digital readout for displaying position of the backroll - Body cover EURO 362,-- - Hardened rolls EURO 650,-- - variable speed of rotation  We have many references!