Used Hydraulic Shear for sale (16,273)

Condition: used, Year of construction: 1993, Technical details: sheet width: 3150 mm plate thickness: 13 mm distance between columns: 3670 mm Knife length: 3150 mm down holder: 18 Stück back gauge: motorisch 1000 height over floor: 850 mm operating hours: 3256 Table dimensions: LxB: 3770 x 500 mm total power requirement: 30 kW weight of the machine ca.: 12,9 t dimensions of machine: 4,4 x 2,8 x 2,4 m Short stroke Continuous run Gap lighting Hydraulic sheet metal lifting device rear light curtain Positionable backgauge * Itjdsu Icnfjpfx Afien

Year of construction: 2005, condition: excellent (used), Very good, hardly used Ijdpfoxbft Njx Afistn

Condition: ready for operation (used), Year of construction: 1995, working width: 2,000 mm, sheet thickness steel (max.): 4 mm, overall weight: 3,500 kg, capacity 2000x4 mm, electric stops, weight 3500 kg Itodpfx Aew Dzqxsfion

Condition: used, MAXIMUM WORKABLE THICKNESSES: R: 45 6MM R: 65 5MM R: 90 4MM Ijdpfow Sndtsx Afijtn

Condition: reconditioned (used), functionality: fully functional, working width: 4,000 mm, sheet thickness steel (max.): 6 mm, cutting length (max.): 3,000 mm, Refurbished machine Hydraulic guillotine shear HACO type PS 4m x 6mm New SP9 control Retractable backgauge, 1000mm travel New 4-edge blades, stainless steel quality Iedpfx Afsxaz Efoiotn

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2003, Kingsland COMPACT 45 Hydraulic Steel WorkeR LxWxH 1160 x 590 x 1410mm (+100mm lifting eye) Die Height From Floor 940mm Shear Support From Floor 940mm Angle Support from Floor 1140mm Notch Height from Floor 940mm Punching Capacity 22dia x 15mm Shearing Capacity 200x 15mm Angle Cutting 100 x 10mm Section Cutting 30mm Round, 25mm Square Nitching 8mm Thickness Punch Pressure 45T Standard Size Fitment Punch & Die 18mm Supplied with: 3 Jaw Chuck Quick Change Tool Post 2 Axis Goodwin Digital Readout *For Sale with Jet Machinery Ltd* Jet Machinery Stock No: #78996 Machine Serial Number: 450 230 03 Cost: £4,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Iedoxawbispfx Afietn Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: reconditioned (used), functionality: fully functional, Year of construction: 1995, machine/vehicle number: 95G412, control type: CNC control, degree of automation: automatic, actuation type: hydraulic, controller manufacturer: Cybelec, controller model: CybTouch 8, working width: 4,100 mm, cutting angle (min.): 0.3 °, cutting angle (max.): 154 °, sheet thickness (max.): 8 mm, sheet thickness steel (max.): 6 mm, sheet thickness stainless steel (max.): 4 mm, sheet thickness aluminum (max.): 8 mm, back gauge adjustment: CNC-controlled, back gauge: 1,000 mm, power: 11 kW (14.96 HP), input voltage: 400 V, input current: 400 A, input frequency: 60 Hz, type of input current: three-phase, oil tank capacity: 220 l, overall weight: 10,500 kg, total length: 4,720 mm, total width: 3,060 mm, total height: 1,880 mm, number of support arms: 4, warranty duration: 2 months, year of last overhaul: 2025, Equipment: documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, Hydraulic guillotine shear with variable angle controlled by CT8 Manual blade gap adjustment Retrofitted with new CT8 Cybelec CNC controller Refreshed paintwork Motorized backgauge controlled by CT8 Front safety with light curtain (finger protection, 14 mm) Rear light curtain available as an option Overhauled pump and hydraulics Squaring arm + 4 front support arms Ijdoxal Idjpfx Afiotn

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2007, working width: 3,100 mm, cutting angle (min.): 0.5 °, cutting angle (max.): 3 °, sheet thickness steel (max.): 13 mm, sheet thickness aluminum (max.): 16 mm, back gauge speed R-axis: 50 mm/s, TECHNICAL DETAILS Maximum sheet thickness (steel): 13 mm Maximum sheet thickness (aluminum): 16 mm Maximum cutting length: 3,100 mm Cutting angle: 0.5° – 3° Sheet thickness (450 N/mm²): 1 - 13 mm Backgauge speed, R axis: 150 mm/s Backgauge travel, Z axis: 1,000 mm Front support arm length (from blade): 1,500 mm Rear buffer speed: 125 mm/s Cuts per minute at full length: 18 Cuts per minute at minimum length: 46 Min. cutting clearance: 0.04 mm Max. cutting clearance: 0.5 mm Positioning accuracy: +/-0.03 mm MACHINE DETAILS Power supply type: Three-phase Main power supply: 3/N/PE - 50Hz - 400/230V Motor power: 30 kW Total weight: 12,500 kg Overall length: 4,000 mm Overall width: 4,500 mm Overall height: 2,000 mm EQUIPMENT - Documentation/manual - Finger guard - Safety light barrier DESCRIPTION SafanDarley guillotine shears feature unique technology. The hydraulic system is controlled electronically during the cutting process. The amount of energy consumed by this system is calculated according to the thickness of the material being cut. The backlash-free ball screw drive enables positioning accuracy of +/-0.03 mm, while the minimal clearance of 0.04 mm allows quality cuts even on materials ranging from 0.5 mm up to the machine’s maximum thickness. The design of the worktable ensures a straight cut, even under heavy loads. Iodpfew Ucy Iox Afiotn The automatic selection of clearance and cutting angle according to material type and thickness, as well as compensation for backgauge position, allow even less-experienced operators to run the machine efficiently and consistently achieve high product quality.

Condition: good (used), functionality: fully functional, Lotze package: Guillotine Shear + Folding Machine Guillotine Shear 1040 x 5.5 Hydraulic Folding Machine 1040 x 7 Motorized with 3 gear stages Both machines fully functional Available for inspection under power Only available as a package Free loaded, D - 88433 Schemmerhofen Iedpfew Tld Hsx Afietn

Condition: used, Year of construction: 1994, sheet width 3000 mm plate thickness 16 mm distance between columns 3200 mm throat 310 mm stroke 300 mm table width 820 mm table height over floor 1215 mm Number of downholders 12 St. cutting angle Iodjt Tqkdopfx Afijtn cutting angle adjustment 1- ° back stop - adjustable mm total power requirement 30 kW weight of the machine ca. 19 t dimensions of the machine ca. 3,8 x 2,65 x 2,85 m Machine was overhauled in 2010 and was modernized with light barrier at table. Machine has an automatic back stop with DRO. Cutting angel is adjusted by motor. Cutting gap is manually adjusted by adjustment of table. Along with the machine we supply a loading/unloading table.

Condition: new, control type: CNC control, overall weight: 4,500 kg, HACO hydraulic guillotine shear, GSX type Itodpfexay U Eex Afien A range available in several models for sheet metal working with lengths from 2 to 4 m and thicknesses from 6 to 13 mm. Equipped with SC200 touch-based CNC control Ball transfers on the sheet support table Options: Sheet holding system Sheet return system to the front Retractable rear stop Finger protection with light curtain Sheet clamp with plastic caps Full support table with ball transfers

Condition: used, functionality: fully functional, total height: 1,640 mm, total width: 3,010 mm, total length: 3,500 mm, overall weight: 5,000 kg, FEATURES: MODEL: GPR 2606 Cutting length: 2,600 mm Cutting capacity (ST 42): 6 mm Backgauge length: 1,000 mm Cutting angle: 1.2° Strokes per minute: 24 Number of hold-downs: 12 Main motor: 15 kW Backgauge motor: 0.75 kW Table length: 2,900 mm Total length: 3,500 mm Total width: 3,010 mm Transport width: 2,100 mm Total height: 1,640 mm Weight: 5,000 kg STANDARD EQUIPMENT: • CE compliant. • Swing beam cutting system. • Upper blade with 2 cutting edges. • Lower blade with 4 cutting edges. Itodpfx Aew S Ibrefion • Automatic blade adjustment via NC-ELGO with 10 memory slots. • Movable foot pedal with emergency stop. • Square guide with “T” slots and retractable internal stops. • 2 support arms with “T” slots and retractable internal stops. • Motorized backgauge with ball screw (1,000 mm travel). • Cutting line illumination. • Table with roller balls for easy material handling. • Rear ramp. • Fixed front guard with 1-metre length, flip-up system, and safety interlock. • Emergency stop buttons. • Bosch-Rexroth hydraulic system. • Siemens electrical components. Inspected and in full working order.

Condition: used, Hydr. swing cut guillotine shears HERA type HSS III No. 598 Year of manufacture 1986 Cutting length 3100 mm Cutting thickness 3 mm Stand projection 200 mm Blade strokes 25 strokes/min. Mains connection 380 Volt, 50 Hz Motor power 3 kW - Motorized adjustable backgauge 1070 mm - Actual value digital display for the backgauge - Cutting gap adjustment - Cutting length adjustment - Front side stop left 1000 mm - 4 sheet metal support arms 1000 mm - el. foot switch Space requirement without sheet support arms L x W x H 3630 x 2200 x 1600 mm Itodpfx Afoq A I Upsijn Weight approx. 4000 kg good condition

Condition: ready for operation (used), Max. workpiece thickness: 20mm, including one unused and originally packed set of blades. Itodpfjim Ixfsx Afien

Condition: used, You are bidding here on a branded guillotine shear from the renowned German manufacturer Schröder. Machine specifications: - Cuts up to 4 mm steel (see type plate) – suitable for aluminium and other materials - Hydraulic cutting (not electric) – higher quality machine - Working length: approx. 2.5 m - Support arms positioned in front of the machine due to space constraints - Rear gauge approx. 1 m - Side/Wedge stop - Work surface with brushes (protects the sheet metal) - Sheet support system - An invoice with VAT shown will be provided - Optional: 2 pairs of spare blades Also available: Press brake from the top manufacturer RAS (Reinhardt Maschinenbau Sindelfingen) - Bending length: slightly over 2 m - Sheet thickness: 3.5 mm steel - Swiveling control panel - Weight approx. 2300 kg - Depth stop and additional rails (see pictures) - Segmented upper beam (new price approx. €6,000 – just for the segments) The press brake comes from a public institution, regularly serviced and well-maintained. Transport can be arranged upon request. Free loading as shown in the photos. Inspection and test runs are possible by prior telephone arrangement. Payment in cash upon collection. If you need any further assistance, please call me – thank you! Collection should take place within 8 days after the end of the auction. Location: 97249 Eisingen (3 minutes from the motorway) Iedpjww E Tkjfx Afijtn Free loading as shown in the photos. Inspection and test runs are possible by prior telephone arrangement. Payment in cash upon collection. If you need any further assistance, please call me – thank you! Collection should take place within 8 days after the end of the auction. Location: Eisingen (3 minutes from the motorway) Article number:

Condition: used, Year of construction: 1971, sheet width 2000 mm plate thickness 16 bei St 42 mm passage width 2250 mm impact length 1000 mm Itsdpfx Afjww Nccjijn blade length 2005 mm throat 600 mm cutting gap adjustment 0,05 - 0,95 mm cutting angle 1° 40' ° down holder 10 Stück back stop - adjustable 10 - 1000 mm table: 2500 x 700 table height over floor 800 mm quantity of oil 900 l weight of the machine ca. 10 t dimensions of the machine ca. 3 x 2,3 x 2,3 m voltage 380 V Food switch, material support beams, spare knifes.

Condition: used, Year of construction: 1981, Max. thickness 4 mm Max. cutting length 2000 mm Itedpew Hf Duefx Afion Motorized back gauge w/dro

Year of construction: 1982, condition: used, sheet width mm plate thickness mm distance between columns mm digital working width 4500 mm Iodeq Dta Ijpfx Afiotn 8mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m

Condition: used, Hydraulic Plate Shear LVD Type HST-C 31 / 6 Iodpfx Aotvb Iuefietn Machine No. 21348 Year of manufacture: 1994 Cutting length: 3,100 mm Cutting thickness: 6.35 mm Backgauge: 770 mm Working height: 950 mm Hydraulic sheet hold-downs: 17 units Hydraulic tank capacity: 150 liters Motor power: 7.5 kW Power connection: 400 Volt, 50 Hz, 9.5 kW, 19 Amp. - Motorized backgauge with digital actual position display ELGO - Backgauge adjustment via push button – rapid in both directions and fine adjustment by jogging in the minus direction only - Sheet lifting device below the backgauge with pneumatic lifting cylinder - Continuously adjustable blade gap from 0.1 mm via handwheel with analog display - Cutting angle adjustment in 5 steps from 1.5° to 3.5°, electrically pre-selectable - Left side angle stop 1,500 mm - 2 table extensions as sheet supports - Electric foot switch - Comprehensive operating manual Space requirements without front table extension (L x W x H): 4,150 x 1,850 x 1,900 mm Space requirements with front table extension (L x W x H): 4,150 x 2,850 x 1,900 mm Weight: 5.5 tons Good condition Very good cutting results, including with thin sheet metal

Year of construction: 1988, condition: ready for operation (used), A hydraulic swing-cut sheet metal shear of our own construction is available. Cutting dimensions X/Y: 1000mm/500mm, max. sheet thickness: 12mm (15mm), machine dimensions X/Y/Z: approx. 3500mm/2000mm/2800mm, weight: approx. 10000kg. On-site inspection is possible. Itjdpfxevhc Rvj Afisn

Condition: used, The guillotine shears cut aluminium up to 8 mm, steel up to 6 mm, and CrNi up to 4 mm. Maximum cutting length: 3050 mm. The installed reversible blades are as good as new—produce very clean cuts, with a pneumatic stacking device. Accessories: 1 complete set of blades, lighting beam/ceiling suspension. The motorized back gauge is functional, but the gauge rail needs to be repaired. Only conditionally suitable for composite panels! Ijdpfx Ajw Nhiqjfijtn

Condition: used, Year of construction: 1999, 264 working width 3200 mm sheet thickness - max. 6 mm output 10,5 kw Itodpswhq D Aofx Afisn weight of the machine ca. 6580 KG

Condition: used, Hydraulic guillotine shear STEINER type HTS 30/20 R Machine. No. 315 Year of construction 1982 cutting length 3050 mm cutting thickness 20 mm backgauge 800 mm controlled motor power approx. 30 kW mains connection 400 Volt, 50 Hz - backgauge with positioning control ELGO - backgauge adjustment via ball screws - Safety light barrier SICK at the front as intervention protection - 3 material support arms with ball rollers - electric foot switch - spare blade Space requirement of the basic machine L x W x H 4650 x 2610 x 3200 mm Weight of the basic machine 27000 kg Space requirement for transport (basic machine) L x W x H 4650 x 2610 x 3200 mm Space requirement for transport (additional) L x W x H 3500 x 2450 x 1400 mm Weight complete 27000 kg Mechanically in very good condition Iodpfx Asd Hxx Ajfietn Hydraulic problems, Electrical control in need of overhaul.

Condition: ready for operation (used), Year of construction: 2018, Width: 1860mm, depth: 800mm, height: 1900mm, weight: approx. 2.3t Rectangular notchers: 57 x 100mm, triangular notchers: 5 x 5 x 7.5mm. Notching station width: 330mm, working height: 915mm Isdporxflcjfx Afijtn

Condition: used, Year of construction: 1990, sheet width . mm plate thickness . mm Itjdpfx Asun U Rdjfisn distance between columns . mm Control Siemens Simatic OP17