Used Self Aligning Ball Bearing for sale (7,961)

Condition: used, Year of construction: 2019, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, planing width: 630 mm, tool diameter: 120 mm, number of blades: 96, actuation type: electric, Equipment: CE marking, - Year of manufacture: 2019. - Condition: very good. TECHNICAL SPECIFICATIONS: - Planing width: 630 mm - Planing height: 3-300 mm - Digital control of table height with display - Motor: 7.35 kW - Maximum chip thickness: up to 8 mm Ksdpfx Abozim Rronjdr - Minimum workpiece length: 250 mm - Diameter of planing shaft: 120 mm - Silent-Power spiral shaft, i.e., very quiet with four-sided knives - Self-aligning planing knives, i.e., no adjustment required after rotation - Additionally, 2 rollers in the table for processing wet or resinous wood - Smooth feed speed adjustment from 4-16 m/min - Power supply: 3 x 400 V - Diameter of dust extraction port: 160 mm - Weight: 845 kg - Dimensions (L / W / H): 125 x 115 x 114 cm

Condition: like new (used), Year of construction: 2017, functionality: fully functional, machine/vehicle number: 163190, grinding length: 600 mm, grinding width: 300 mm, workpiece weight (max.): 270 kg, grinding wheel diameter: 350 mm, distance table to spindle center: 565 mm, Like-new horizontal surface grinding machine with few operating hours! TECHNICAL DETAILS Grinding area Grinding length: 600 mm Grinding width: 300 mm Work table and workpiece load Table dimensions: 300 mm × 630 mm Kjdpszqcvgsfx Abnsdr Maximum workpiece weight: 270 kg Distance spindle axis – table surface: 565 mm Travel distances and feeds Travel distance X-axis: 765 mm Travel distance Y-axis: 340 mm Scale ring graduation Y-axis: 0.02 mm Scale ring graduation Z-axis: 0.005 mm Automatic transverse feed Z-axis: 0.1–8 mm Feeds and rapid traverses Hydraulic feed X-axis: 7–23 m/min Rapid traverse Y-axis: 990 mm/min Rapid traverse Z-axis: 460 mm/min Grinding wheel Grinding wheel dimensions: 350 mm × 40 mm × 127 mm MACHINE DETAILS Control type: Conventional 2-axis position indicator: KNUTH Xpos 3.1 Motor power grinding spindle: 5.5 kW Total power requirement: 7 kW Dimensions & Weight Machine dimensions: 2,800 mm × 2,200 mm × 1,890 mm Machine weight: approx. 2.7 t EQUIPMENT 2-axis position indicator KNUTH Xpos 3.1 Grinding wheel Grinding wheel flange Balancing arbour Balancing stand Halogen work light Magnetic chuck 600 mm × 300 mm Adjustment screws Operating tool Automatic transverse and longitudinal feed Hydraulic table longitudinal movement Double V-guides for the longitudinal movement Combined V- and flat guides for the transverse movement Hardened and ground table guide rails with PTFE counter coating Grinding spindle with maintenance-free, preloaded precision angular ball bearings External hydraulic unit Automatic central lubrication

Condition: used, Year of construction: 1997, operating hours: 3,861 h, overall weight: 1,500 kg, rotor diameter: 235 mm, total length: 2,500 mm, total height: 2,500 mm, total width: 1,500 mm, rotor width: 794 mm, power: 11 kW (14.96 HP), filling opening width: 800 mm, filling opening length: 1,000 mm, No. 04527 Kjdpfey Hlgijx Abnjdr Single-shaft shredder Vecoplan VAZ 100/80 U40 Used, year of construction 1997, 3861 operating hours The waste shredder VAZ 100/80 is designed for shredding wood waste, pallets, crates, particleboard and fiberboard, paper and cardboard, plastics, etc. The machine is most commonly used to produce fuel chips from wood waste, wood scraps, and pallets. Feed opening 1000 x 800 mm LW Universal rotor, tool size 40 Connected load 13 kW, drive power 11 kW Throughput capacity for logs 250 - 350 kg/h Throughput capacity for particleboard 800 - 1000 kg/h Screen hole size (diameter) 25 mm Rotor diameter 235 mm, rotor width 794 mm, speed 95 rpm Rotor mounted in self-aligning roller bearings with steel housing Feed unit made of channel steel, driven by hydraulic cylinders Guided in brass rails, with rollers on the sides Main drive via gear motor with two-stage worm gear Motor speed 95 rpm Automatic foreign object breakage protection PLC control, automatic mode / manual mode Hydraulic unit with 2 operating speeds 2 suction connections on the sides, 200 mm each Currently, the machine is designed so that the wood chips fall downward. If the opening at the bottom is closed, an extraction system could be connected. Includes 1 new counter blade, various cutting blades, complete technical documentation Transport dimensions approx. 2500 x 1500 x 2500 mm LWH Weight approx. 1500 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or shipping Terms of delivery: ex warehouse

Year of construction: 2025, operating hours: 1 h, condition: like new (used), functionality: fully functional, machine/vehicle number: S25Lybra04, Exhibition facility - like new. LYBRA EASY / 3 programs TECHNICAL DETAILS Diameter Ø 1,700 mm Height 2200mm Max. pallet dimensions: 1,200 x 1,200 mm Rotation arm using high resistance ball bearings Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations A positioning aid for correctly placing the pallet is included in the scope of delivery Safety bumper for collision protection Push button for switching on the machine and start & stop function according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F62 - Ergonomic height for film change ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 3 storable wrapping programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application Soft start cycle to reduce film tears on sharp pallet edges FILM CARRIAGE TYPE “FE” WITH ELECTROMAGNETIC BRAKE via electromagnetically braked roller Foil specification Max. outer diameter Ø 250 mm - core Ø76mm - height = 500 mm Kodpfxeykubis Abnsdr Standard connection values: 230 V - 1L+N+PE - 50 HZ Total power: 1.2 kW / 6A - 1.75 kW / 8.5 A (with PRS / PS) Other systems available immediately from the Ludwigsburg warehouse.

Condition: ready for operation (used), Year of construction: 2006, table width: 1,520 mm, table length: 6,200 mm, travel distance X-axis: 6,821 mm, travel distance Y-axis: 1,963 mm, travel distance Z-axis: 663 mm, controller manufacturer: BIESSE, controller model: XP600 PC-based control with Windows XP WRT, spindle motor power: 9,000 W, spindle speed (max.): 22,000 rpm, number of slots in tool magazine: 22, number of axes: 5, This 5-axis BIESSE Rover C 9.65 was manufactured in 2006. It features a working area of 6200 mm in X and up to 1935 mm in Y, with a Z-axis travel of 663 mm. The machine is equipped with a powerful 8 kW spindle and a tool changer with 22 positions. If you are looking to get high-quality CNC routing capabilities, consider the BIESSE Rover C 9.65 machine we have for sale. Contact us for further details. • Drive system X-axis: rack and pinion • Drive system Y-axis: ball screw • Drive system Z-axis: ball screw • Guide system: linear guides with recirculating ball bearing blocks • Motors: brushless motors with digital drives • Programming formats: DXF and CID3 • Main spindle type: 5 interpolating axes machining unit • Spindle power S1: 8 kW at 12000 rpm • Spindle power S6: 9 kW at 12000 rpm • Maximum spindle speed: 22000 rpm • Tool interface: HSK F63 • C-axis rotation: 360° continuous • C-axis speed: 13.5 rpm • B-axis rotation: ±100° (positioning) / ±98° (interpolation) • B-axis speed: 13.5 rpm • Z-axis feed speed: 30 m/min • Vacuum system: multi-zone vacuum with connections on both sides • Vacuum pump capacity: 250 m³/h (50 Hz) / 300 m³/h (60 Hz) Kjdpfozugvrsx Abnjdr • Worktable: ATS system with modular supports • Number of workpiece supports: 10 • Number of module carriers: 40 • Module size: 132 x 132 x H41.5 mm • Vacuum module size: 132 x 146 x H74 mm / 132 x 54 x H74 mm • Total module height: 115.5 mm • Clamping system: vacuum and pneumatic (Uniclamp optional) • Clamping force Uniclamp: 220 kg at 7 bar • Minimum workpiece length (Uniclamp): 140 mm • Drilling unit: BH 42 L • Vertical drilling spindles: 29 • Horizontal drilling spindles: 6 (double output) • Grooving saw diameter: 120 mm • Drilling spindle speed: up to 6000 rpm • Tool changer: chain type • Tool changer capacity: 22 positions • Tool spacing: 180 mm • Max tool diameter (full load): 175 mm • Max tool diameter (single): 250 mm • Max tool length: 268 mm • Max tool weight: 7.5 kg • Total tool weight: 100 kg • Pick-up tool changer: 1 position • Max tool weight pick-up: 8 kg • Electrical supply: 380/400/415 V 50/60 Hz • Inverter for spindle: up to 14 kW • Cooling system: liquid cooling unit for electrospindles (1600 W) • Lubrication system: automatic centralized lubrication • Safety system: CE compliant with safety mats, guards and emergency stops • Chip removal: integrated chip conveyorIn 2023, the machine received a new 5-axis spindle head HS552 A HD 0S2 + ES360 F63 9 kW

Condition: used, functionality: fully functional, machine/vehicle number: 106341-11, Year of construction: 2005, overall weight: 8,000 kg, total height: 2,700 mm, total length: 5,660 mm, total width: 3,956 mm, The drilling method of the deep hole drilling machine is single-lip drill deep hole drilling. Drilling Unit Information: - Number of spindles: 1 - Infinitely variable spindle speed: 300 – 8000 rpm - Spindle drive power: 7.5 kW - Max. drilling depth: 800 mm - Drilling diameter min/max: 3 – 25 mm based on ST 60 - Max. twist drilling: 25 mm - Max. thread tapping: M24x3 - Milling material removal rate: 150 cm³/min Travel Paths: - X-axis travel: 800 mm - Y-axis travel: 400 mm - Z-axis travel: 630 mm - W-axis travel: 800 mm Travel Speed: - X-axis speed: 15,000 mm/min - Y-axis speed: 15,000 mm/min - Z-axis speed: 15,000 mm/min - W-axis speed: 15,000 mm/min Fluid Information: - Coolant supply: deep hole drilling oil - Tank capacity: 800 liters - 1x scraper belt chip conveyor - 1x hydraulic unit and pneumatic system/equipment - 1x submersible pump: Pumping capacity: 200 l/min - 1x low pressure pump: Pumping capacity: 100 l/min Pump drive: 1.7 kW - 1x compact belt filter: Filtration capacity: 120 l/min for processing steel/non-ferrous metals - 1x radial piston pump with remote adjustment: Pumping capacity: 2 – 94 l/min Pump drive: 7.5 kW Spindle Unit: - Cartridge spindle design with drive housing and spindle drive with gearbox. Spindle bearing with precision angular contact ball bearings and lifetime grease lubrication. Milling and Drilling Spindle Unit: - For conventional machining - Spindle head with HSK 50 tool holder Drill Bush Holder: - Design as 2-position turret with electric swivel mechanism - Locating position via Hirth coupling - Turret head with fixtures for: Guide bushes for deep hole drilling Milling and drilling spindle unit for conventional machining Pickup Tool Changer: - For conventional tools and drill bushings - Disc magazine design with 20 stations including feed stroke Automatic Tool Changer for Deep Hole Drilling Tools: - Fixed ELB column magazine for at least 5 tools including automatic tool clamping for HSK holders Clamping Table with W-Axis and NC Rotary Table: - Length/width: 800 x 600 mm - Positioning accuracy: B-axis +/- 30" - Centric payload: 1,500 daN Workpiece Clamping Device: - 1x tailstock with manual clamping movement - 1x NC dividing unit (A-axis) with manually operated two-jaw chuck for workpiece clamping - 1x base plate for mounting and clamping drill bushings + supporting prisms Ksdpfx Abjw E H E Rjnsdr Electrical Equipment Information: - 1x CNC control Sinumerik 840D (digital complete system), including PLC S7-300 Connection Data: - Operating voltage: 3AC 400V ±10% – Frequency: 50 Hz - Control voltage: 24 V DC - Total connected load: 25 kW

Year of construction: 2015, operating hours: 2,420 h, condition: ready for operation (used), travel distance X-axis: 300 mm, controller manufacturer: SIEMENS, controller model: 840D, overall weight: 5,500 kg, spindle motor power: 2,000 W, spindle speed (max.): 600 rpm, number of axes: 2, Cylindrical grinding machine manufactured in 2015. This GEIBEL & HOTZ RS 600 C features a maximum swing diameter of 275 mm and a center distance of 600 mm. It is equipped with a grinding spindle motor power of 5.5 kW and operates at speeds ranging from 700 to 2100 rpm. If you are looking to get high-quality grinding capabilities, consider the GEIBEL & HOTZ RS 600 C machine we have for sale. Contact us for further details. • Center distance: 600 mm • Center height: 140 mm • Max swing diameter: 275 mm • Max workpiece weight between centers: 100 kg • Max workpiece torque (flying): 40 Nm (including clamping devices)Workpiece spindle • Taper: MK4 and KK5Tailstock • System: Cylindrical screw pressure spring • Operation: Manual via hand lever • Quill stroke: approx. 40 mm Kdodpoyzn Dmefx Abner • Taper: MK4Grinding spindle • Arrangement: Left • Motor power: 5.5 kW • Speed: 700–2100 rpm • Bearing: Precision rolling bearings • Lubrication: Lifetime lubricationGrinding wheel • Standard size: 400 × 50 × 127 mm • Bore: 127 mm • Width: 20–50 mm • Taper: 5° • Max diameter: 55 mm (taper reference) • Flange diameter: 175 mm • Speed range: 15–35 m/s (constant cutting speed control)AxesX-axis (= FEEDBACK MOVEMENT) • Drive: Electromechanical with ball screw • Feed rate: 0.01–8000 mm/min • Setup: Electric handwheel or direction push button • Measuring system: Glass scale, internal resolution 0.0005 mmZ-axis (= TABLE MOVEMENT) • Drive: Electromechanical with ball screw • Table speed: 0.01–12000 mm/min • Setup: Electric handwheel or direction push button • Measuring system: Rotary encoder, resolution 0.001 mmControl / Electrical • The control panel is mounted to the machine stand using a swivel bracket. • Control system: Siemens 840D • Drive system: Siemens SINAMICS • Emergency stop components, safety integrated • Motor protection switch, fuses: Siemens • Connectors: WAGO Harting connectors in the work area • Operating voltage: 400 V, 50 Hz, 3 phase • Network type: TN network, without residual current device (RCD) • Control voltage: 230/24 V • Installed electrical power: approx. 14 kW / 18 kVA • Compressed air: Oil-free compressed air, approx. 5 bar • Control cabinet: Air conditioning unit • Electrical cabinet equipment: Interior lighting • Service socket: 230 V / 3 APneumatics / Coolant • Compressed air requirement: approx. 5 bar, oil-free • Coolant tank capacity: approx. 300 L • Coolant pump capacity: 50 L/min at 3.5 bar • Cleaning pump capacity: 20 L/min at 1.5 barOperating data • Operating hours: 2,420 hours Additional equipment • Air extraction unit • Capacity: approx. 1000 m³/h • Dimensions: approx. 460 × 840 × 580 mm • Three-jaw chuck • Diameter: 160 mm • Operation: Manual • Weight: approx. 10 kg

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 3,220 kg, maximum load weight: 8,580 kg, overall weight: 11,800 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 450 mm, total length: 6,900 mm, total width: 2,550 mm, total height: 1,550 mm, suspension: steel, tire size: 235/75 R17,5", tire condition: 100 %, Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized to meet individual customer needs. Chassis: Central axle tilting trailer Steel welded construction, continuous tilting shaft at the rear with 80 mm ball bearing Gear-supported front support leg Foldable rear support Wheel chocks with holder Underrun protection, steel Splash guards at the rear, covering the entire width (not in conjunction with forklift mount) Quarter panel fenders 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable (lock not included) Note! The side panel touches the storage box when folded down. Lockable storage space for loading ramps below the loading area Coupling device for central axle trailer Drawbar with tested 40 mm tow hitch Drawbar height adjustable via spindle, max. adjustment range 300 mm Axles + Suspension GFA or BPW axles, at the manufacturer's choice, with tapered roller bearing and S-cam brake "Axle/chassis laser-aligned" - reduces tire wear and fuel consumption Parabolic suspension with maintenance-free steel-rubber bearing and mechanical axle load equalization (linkage equalization) Wheels and Tires 235 / 75 R 17.5", manufacturer's choice Steel rims, factory silver Braking System 2-line compressed air braking system Color-coded line routing for easy servicing Handwheel-operated parking brake 24 Volt ABS and ALB, with ABS connector at the front, with connection cable Note: The trailer may only be towed by towing vehicles that guarantee the effectiveness of the ABS! 2 fail-safe coupling heads at the front, with connection lines to the towing vehicle Electrical System Kedpjzcv Stjfx Abnedr 12 to 24 Volts, multi-chamber lights in LED, yellow LED side lighting, license plate lighting in LED 2 white position lights at the front 2 white/red marker lights at the rear 2 x 7-pole fail-safe connectors at the front, with connection cable Additional LED work lights at the rear, switched via reversing light Hydraulics Three-way tipper, hydraulic multi-piston cylinder with stroke limitation and safety cable Low-pressure cylinder up to max. 170 bar, without throttle. If required, this must be retrofitted on the truck (truck with max. hydraulic flow rate of 55 l/min) Hydraulic connection with SVK connector NW 10/3, including connection hose Operation hydraulically via truck auxiliary drive Tipping Platforms Stable tipping platform with 4 mm steel sheet base, side panel construction in steel, side walls continuous, foldable and pivotally mounted with central locking at the bottom. Rear corner posts pluggable. Rear wall foldable and pivotally mounted, with central locking at the bottom. Platform length approx. 5,000 mm, side walls with 6 hinges at the bottom. Side panel retraction springs Platform width 2420 mm 3 pairs of lashing eyes in the floor, each 5 tons Paint Finish Frame: Hot-dip galvanized including passivation "15-year guarantee against rust through" Side panels/platform: galvanized or painted according to customer requirements Customized Transport Solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized to meet individual customer needs.

Condition: used, Hydraulically self-centering center, rest, or support – SMW AUTOBLOK Hydraulic center with hydrostatic bearing Suitable for GILDEMEISTER / MAX MÜLLER lathe MD 5 Type: SLK 8-70 N Clamping range: 8 to 70 mm Operating pressure: approx. 60 bar Center base: 245 x 240 mm Design: fixed Kdsdpfx Aeiv Irlobnor - 3 pieces of roller bearing, Ø 35 mm - Roller width 18 mm - Hydraulically self-centering Dimensions L x W x H: 350 x 250 x 550 mm Weight: 65 kg Good condition

Condition: used, Year of construction: 2006, Technical details: table load: 22 t table diameter: 2500 mm Total power requirement: 9,6 kW max. table load: 22.000 daN / 22000kg table rotating: links/rechts Grad table - inclinable: 0 - 120 Grad swival range +/-: 120 Grad height of the swivelling axis: 1700 mm machine weight approx.: 12000 kg rotary table revolutions per minute : 0,05 - 1,0 U/min connected load: ca. 5,0 kVA dimensions LxWxH: ca. 4,5 x 2,5 x 2,3 m Welding positioning turn-tilt table developed and manufactured by Müller Opladen ARC KON EWeding GmbH. Machine frame solid, welded steel construction with ball-bearing tilting device Table with centering grooves and T-slots for M24 according to DIN 650. Infinitely variable rotary drive from 0.05 - 1.0 rpm. Height to center of swivel axis 1700 mm hydr. tilt adjustment, infinitely variable from 0 - 120° Kjdpfxou Nkx Ij Abnjdr Drive is designed for a torque of approx. 40,000 Nm at the turntable Accessories: 1x 2-row foot switch 1x remote control 1x working platform *

Condition: refurbished (used), Year of construction: 2020, operating hours: 1,181 h, functionality: fully functional, working width: 510 mm, area performance: 2,300 m²/h, input voltage: 24 V, water tank capacity: 42 l, battery voltage: 24 V, battery capacity: 105 Ah, brushing unit diameter: 510 mm, operation weight: 230 kg, Hako Scrubmaster B45 CL TB 510 Refurbished scrubber-dryer with new batteries, new suction turbine, and more – includes 6 months warranty and a new DGUV V3 electrical inspection with test certificate. Working width without squeegee: 51 cm Working width with squeegee: 86 cm Max. area performance: 2,700 m²/h Fresh water tank: 45 L Recovery tank: 45 L Kdsdpfx Abeyanpfensr Drive: Yes Drive type: Electric 24V Battery: 2 x 12V 105 Ah GEL batteries Installed new parts / performed repairs: - Suction motor 24V 400W (new) - 2 x 12V 105 Ah GEL batteries (new) - Brush deck / brush motors reconditioned incl. new ball bearings, carbon brushes, and bumper bar - All hoses replaced (new) - Disc brushes (new) - ACLA rubber wheels (new) - Squeegee rubbers (new) - Fresh water filter (new) In addition, we offer: Service, repair, and sales for all common Hako models.

Condition: used, Year of construction: 1992, Table dimensions 1100 x 880 mm Motor output 7,5 kW Spindle diameter 30 mm reus 3000/4500/6000/9000 U/min Weight 650 kg Year 1992 Used Machine Year of manufacture: 1992 Features and technical specifications: - Universal table milling machine for machining wood, plastic, and light metals. - Interchangeable MK5 milling arbor, secured for left/right rotation - Special ball bearings for high-speed operation - Special ribbed table with quill and additional dust extraction under the table. - Locking mechanism for tool change in any spindle position - Digital height indicator with 1/10 mm resolution and zero setting (optional) - Maintenance-free and dust-protected bevel gear feed mechanism: 1 revolution = 1 mm, stroke 130 mm - Central lubrication of both bearings and the feed spindle - SFM 101 control panel - Speed displayed visually and automatically - With automatic brake Kdedpfxezr Rq Io Abnor - Extremely fast belt change with automatic speed display - Machine table dimensions: 1,100 × 880 mm - Working height (table): 900 mm - Motor power: 7.5 kW - Speeds (VBG 7 visual display): 3,000 / 4,500 / 6,000 / 9,000 rpm - Max. height adjustment of the milling spindle: 130 mm - Safety interlock for high speeds - Milling spindle taper: MK 5 - Milling spindle, interchangeable: Ø 30 mm - A-weighted sound pressure level at ear level: L(A) 75 dB - Connection diameter: 2x120 mm - Air velocity: 24 m/s - Air flow rate at table: 680 m³/h - Airflow rate at the router fence: 1,060 m³/h - Dimensions: approx. 140 x 100 x 175 cm - Weight: approx. 700 kg

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,200 kg, maximum load weight: 16,800 kg, overall weight: 21,000 kg, axle configuration: 2 axles, loading space length: 5,000 mm, loading space width: 2,420 mm, loading space height: 600 mm, total length: 7,200 mm, total width: 2,550 mm, total height: 1,800 mm, suspension: air, tire size: 435/50 R19,5", tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements. Chassis, central axle, tipping trailer Steel welded construction, continuous tipping shaft at the rear with 100 mm ball bearing Type 210, then total weight technically 21,000 kg (special permit required) Kdsdpfxozd Eynj Abner Gearbox support leg at the front Retractable rear support 2 chocks with holder Under-ride guard, steel Splash guards at the rear over the entire width (not in conjunction with forklift holder) Quarter panel fenders in front of and behind each axle 1 plastic toolbox, w=600 / h=425 / d=460 mm, lockable 1 pair of aluminum ramps, 3,440 mm long, 360 mm wide, load capacity per pair 8,000 kg (attachment rail for ramps at the rear) Coupling device for central axle trailer Drawbar with tested 50 mm tow hitch Axles + suspension BPW disc brake axles "Axle/chassis laser-aligned" reduces tire wear and fuel consumption Axle spacing 1810 mm (then 10 tons axle load technically) Air suspension Braking system 2-line compressed air brake system Color-coded line routing for easy maintenance. Spring brake parking brake 2 fail-safe coupling heads at the front, with connecting lines to the tractor unit, 24 Volt EBS, electronic braking system with EBS connector at the front, with connection cable, Note: The trailer may only be towed by tractor units that guarantee the effectiveness of the ABS! with lift and lower valve Vehicle - driving stability system Axle load detection via EBS-CAN bus signal, for display on the display in the driver's cab, truck must be correspondingly pre-equipped, no truck installation (no calibrated scale) Wheels and tires 435/50 R19.5", manufacturer's choice Tires with 164 K or J marking, manufacturer's choice Steel rims, factory silver Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides 2 white position lights at the front in LED 2 white/red marker lights at the rear 2 x 7-pole fail-safe plugs at the front, with connection cable, 1 additional LED work light at the rear, switched via reversing light Hydraulics Three-way tipping mechanism, hydraulic multi-piston press with stroke limiter and safety cable, Low-pressure cylinder up to max. 170 bar, without throttle. If required, this can be retrofitted to the truck. (Truck with max. hydraulic delivery rate of 55 l/min) Operation hydraulically via truck PTO Hydraulic connection with SVK plug NW 10/3, incl. connection hose Tipping bridges Steel sheet floor Hardox 450, 4 mm thick, ball bearing at the rear, 100 mm diameter Side panel construction steel, side walls foldable and pivotally mounted with central locking at the bottom. Rear wall pivotable and as a 2-wing door (not foldable), with door holder and protective rubber on the side (not in conjunction with pivot or mesh grating attachment) Side wall retraction springs (not possible with foldable front wall) Platform width 2420 mm 5 pairs of lashing eyes in the floor, 5 tons each Painting Side panels/bridge painted in desired color Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements.

Condition: used, Year of construction: 1998, gebraucht 1998 090148 Kodpsyackwefx Abnjdr prompt, Zwischenverkauf v Belgien 24900 € 1 3100 mm 6 mm 0.5 - 3.5 ° 9.5 kW 950 mm 4070 mm 2330 mm 3400 mm 1850 mm 5500 kg Motorized backgauge 1000 mm, ball screws, digital display Cutting gap adjustment from the front with handwheel Cutting length adjusment Cutting angle adjustment Downholer safety guard Rear safety via light barrier Foot pedal Table supports with ball bearings 1 side arm 1500 mm 2 support arms Operating manual in German with CE declaration of conformity BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: ready for operation (used), Year of construction: 1994, A CNC 3-axis machining center Stama is available. Travel X/Y/Z: 1000mm/400mm/350mm, table dimensions X/Y: 1500mm/430mm, max. table load: 1200kg. Spindle power: 5.5kW, spindle taper: SK30, tool positions: 12, torque: 47Nm, spindle bearing diameter: 60mm, speed: 6000rpm. Positioning resolution: 0.001mm, positioning tolerance: +/-0.01mm, repeatability: 0.005mm, rapid traverse: 20m/min, feed rate: 5m/min. Drilling capacity (steel): 25mm, tapping capacity (steel): M24, milling capacity (steel) SK30/SK40/aluminum: 150cm³/180cm³/500cm³. Machine dimensions X/Y/Z: approx. 3200mm/2300mm/2500mm, weight: approx. 5500kg, control: Fanuc Series 0-M. Including C-axis and floppy disk drive. Without vises and tool holders (SK30). The cover of the Y-axis ball screw is missing. Documentation available. An on-site inspection is possible. Ksdpfxjxl Upus Abnjdr

Condition: as good as new (ex-display), Year of construction: 2023, pressure 80.0 t stroke 250 mm table surface area 1040 x 260 mm column travel between the guideways 1040 mm ajustment speed 8.0 mm/sec working feed 5.0 mm/sec return speed 10.0 mm/sec engine output 5.5 kW weight of the machine ca. 835 kg. dimensions of the machine ca. 1810 x 700 x 2100 mm Exhibition machine from 2023 with only approx. 2x operating hours condition like NEW special price on request Equipment: - robust electro-hydraulic workshop press, with fixed cylinder - Ideal for aligning axles, shafts etc., but also for pressing in and pressing out bolts, bearings, bushes etc. - Robust welded steel construction for heavy-duty use - Table height adjustment via piston rod * Including round steel chain and 2x locking bolts Kdsdpsw U U Svefx Abnor * Piston rod with metric mount - 1x set of V-block prism support - Pressure gauge for pressure display - Simple manual operation with : * 1x feed speed * 1x working speed * 1x retraction speed - piston can be stopped in any position - Hydraulic tank permanently mounted on the side - operating instructions

Condition: like new (used), total length: 5,000 mm, total width: 2,400 mm, total height: 930 mm, color: blue, Operating conditions: The trailer is designed for use on level and paved surfaces for internal plant transport. Towing vehicle type designation: unknown Load to be transported: unknown Multiple trailer operation: The trailer components are not designed for operation in combination with multiple trailers (without a trailer coupling). Payload: 40t at 6 km/h and evenly distributed load (surface load) across the loading platform between the axles. Point or line loads are only permitted upon notification. Main frame: Robust welded construction made from profile steel sections. Loading platform: Size approx. 5000 x 2400 mm, loading height 930 mm, platform covered with timber planks, all-round edge protection. Steering: All-wheel steering on 4 pendulum axles, tow bar can be raised, removed, and repositioned from front to rear. Hitch height on towing vehicle approx. 670 mm (other hitch heights only permitted upon notification). Drawbar eye according to DIN 74054, diameter 40 mm. Track rods with adjustable ball joints. Diagonal or towing rods adjustable and fitted with low-maintenance joint bearings. Drawbar safety lock according to accident prevention regulations (UVV). Undercarriage: 4 steered pendulum axles (2 steered axle lines) to ensure even load distribution on the wheels. Wheels with solid elastic rubber tires approx. 559 x 305 mm, wheel hubs with tapered roller bearings and permanent grease lubrication. Paint finish: Top coat RAL 5002 Ultramarine Blue. Additional equipment: 2 lashing bars on each long side. Ksdpfsxrtlusx Abnsdr For rental or sale EU-wide.

Condition: excellent (used), Rolling bearings, ball bearings, SKF bearings, SKF, self-aligning bearings, roller bearings, needle bearings, axial cylindrical roller bearings, shaft washer -Manufacturer: INA, bearing washer shaft washer for axial cylindrical roller bearings 20 pcs. unused OVP -Type: WS 811 12 -Carton: with 20 pieces of bearing washers Kdodpfxsgn Hyie Abner -Quantity: 2 boxes available -Price/Sale: per carton -Carton dimensions: 100/150/H95 mm -Weight: 2.1 kg/piece

Condition: used, Year of construction: 1992, gebraucht 1992 090174 Belgien 17800 € 1 3050 mm 6 mm 11 - 25 1/min Kdedpfjyi Hppex Abnjr 0.5 - 3 ° 18 750 mm 11 kW 3850 mm 1750 mm 1720 mm 4600 kg 770 mm SC 5 control for: - Sheet thickness input - Automatic cutting angle and gap adjustment - Cutting length limitation - Programmable backgauge length Motorized backgauge 750 mm Downholder protection guard Foot pedal Table supports with ball bearings 1 side fence 1000 mm Operating manual in German Machine does not comply with German accident prevention regulations (UVV) or Austrian AMVO NEW BLADES BUYING USED MACHINERY IS A MATTER OF TRUST - OUR TRANSPARENCY PROMISE We offer you maximum security and complete transparency. • HONEST INSIGHTS: Detailed photos and functional videos of the current condition • LIVE ON-SITE CHECK: Live testing is possible at our facility • DIGITAL DEMONSTRATION: Individual live demonstration via video call • RISK-FREE PURCHASE: 14-day return policy Details:

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, Tool24 PickOne Goods dispensing system with an innovative drum system to ensure secure individual retrieval of each item. Very fast goods retrieval due to short access times, a self-opening compartment, and an optical signal at the correct retrieval compartment. The drum of the Tool24 PickOne is available with up to 4 different compartment sizes as a standard configuration and, with a load-bearing capacity of over 1000 kg, is specifically designed for industrial use. Flexible mounting of a touchscreen thanks to perforated panels installed on both sides. The master system can be expanded as needed with additional expansion systems and combined with all Tool24 hardware variants. The Tool24 PickOne – master system is a state-of-the-art goods dispensing system that was specifically developed for industrial use. It combines the functions of a tool magazine with the security and efficiency of an automated tool cabinet. Kdjdpezuwvcofx Abnjr

Condition: like new (used), Year of construction: 2022, machine/vehicle number: P 710, functionality: fully functional, power: 5.5 kW (7.48 HP), oil tank capacity: 120 l, overall weight: 6,500 kg, control type: CNC control, Machine is in as-new condition. The High Quality Press Brake (HQPB) represents the top model of the Placke range of press brakes. The entire manufacturing process, from hydraulic cylinders to control cabinet assembly, is performed in-house. By combining state-of-the-art technology with many years of expertise in forming technology, the HQPB series enables precision bending at the highest level. Even the standard configuration provides a fully functional press brake. This package of safety, reliability and efficiency, together with user-friendly operation, allows us to meet the highest demands and tolerances in the bending process. Machine Frame: - Base machine constructed from S 355 N steel - Side supports with 2 pressure pipes and an overhead oil tank, welded - Above-floor design - Coating (2-component structured lacquer), light grey (RAL 7035) and signal grey (RAL 7004) Upper Beam: - Press beam stress-relief annealed - Depth of stroke measurement, reading head guided by ball bearing rails - Separate Y1 and Y2 control, electronic monitoring of parallelism Hydraulic System: - Hydraulic proportional control valve with electronically monitored cylinder synchronization - Solid steel cylinders with inductively hardened piston rod - Low-noise internal gear pump Punch Clamping: - Upper tool holder system WILA, hydraulic clamping system, Type NSCL-II-HC, fully hardened, Maximum load: head bearing = 250 t/m, shoulder bearing = 300 t/m Lower Beam: - Narrow table incl. manual clamping strip, dimensions: 48 mm high, 70 mm wide - Reinforced lower beam. Mechanical crowning compensation is structurally unnecessary. - Single V-die holder (13x20) - Working height: 1050 mm (with 55 mm die height) Front Side of Machine: 2 aluminum support arms at the front, approx. 600 mm long, incl. 2 flip stops, measuring tape, and plastic wear strip. The support arms are adjustable via ball guides and height-adjustable from 55 mm to 100 mm die height using a slotted adjustment. The ball guide is milled into the lower beam. Control and Regulation Technology: - Operating voltage 400V / 3Ph / 50Hz - Switching and safety components by Telemecanique - Backgauge with AC servo technology - Pilz safety PLC Backgauge “2-axis control”: - X and R axes CNC-controlled - Z-axis manual Delem DA 66 Touch control panel on swivel arm. Safety devices in accordance with CE standard Technical Data and Working Range: Press force: 600 kN Working length: 1550 mm Distance between frames: 1200 mm Installation height: 400 mm Throat depth: 255 mm Ram stroke: 215 mm Ram Speeds: Rapid approach max. 280 mm/s Press speed max. 9.8 mm/s Kodpfxeyvzkie Abnodr Return speed max. 170 mm/s Ram positioning accuracy: ± 0.01 mm Ram tilt: ± 10 mm Electronically limited to ± 5 mm Lower beam height above floor: 947 mm Motor power: 5.5 kW Main dimensions: Below-floor depth: 0 mm Pit depth for side frames: 0 mm Machine weight: approx. 6.5 t Tank capacity (hydraulic oil): 120 l (Specifications subject to change) Rear machine lighting: Work area illumination via LED light strip in the area between the side frames.

Condition: used, Year of construction: 2015, sheet width 3080 mm plate thickness 16.0 mm thickness at "Niro-steel" 12.0 mm no. of strokes 7 - 12 Hub/min cutting angle 0.5 - 2.5 ° back stop - adjustable max. 1000 mm traversing speed 200 mm/sek down holder 14 Stück work height max. 840 mm Column width 3420 mm throat 350 mm Control D-Touch 7 oil volume 450 l voltage 400 V engine output 45.0 kW weight 18150 kg range L-W-H 4130 x 2210 x 2570 mm Good / well-maintained condition (!!) New price ~ €120.000 Special price upon request Features: - Robust electro-hydraulic sheet metal shear ("guided") Kodpfjxab Rusx Abnjdr - CNC control unit D-Touch 7 ("touchscreen") * Anti-reflective robust 7" color touchscreen control panel * Easy positioning to the desired size * Positioning accuracy 0.1 mm * Unlimited material definition in the material library * Intuitive menu navigation * Separate display for actual and target values * Backgauge retraction function * Cutting length control via adjustable stroke length * Cut counter * Automatic machine stop when the programmed cuts are reached - CNC electro-motorized adjustable backgauge * Travel range max. 1,000 mm * Backgauge adjustment via ball screws and linear guides - CNC electro-motorized cutting gap adjustment - CNC Electro-hydraulic cutting angle adjustment - Heavy-duty welded steel construction - Ergonomically positioned and clearly laid-out control panel - Hold-down clamp positioned close to the cutting edge - Front light barrier (instead of finger guard) - Self-regulating hold-down clamp pressure - Rear safety device (light barrier) - 1x side stop (L = 1,500 mm) - 2x support arms (L = 1,000 mm each) - Wide sheet supports with ball transfer rollers - Mobile foot switch with emergency stop function - High-quality, regrindable blades (split) - Rear sheet chute - Original operating instructions

Condition: good (used), Year of construction: 2011, machine/vehicle number: 2212.287, Automatic panelsaw Schelling Typ:FH 6 430 Maskin nr:221.287 År:2011 Panel beam saw Schelling with automatic, rear-feed,lifting table. For sawing board material, chipboard, MDF, Plywood, Board, Laminate etc. Techn info: Software MCS Evolution 2.0, SPS, Soft-SPS-Siemens WinAC Operating system WINDOWS XP PC with keyboard and mouse TFT monitor 17" Cutting length 4300mm, automatic detection of the start of the plate Cutting width 4300mm Machine accuracy of the cut length 3m +-0.1mm Positioning accuracy measured at input +-0.1mm Max diameter saw blade 460mm, spindle 30mm Pre-scoring blade 200mm, spindle 20mm motor operation is set from the control console Max panel thickness 120mm Panel stack aligner Main saw blade motor 27kw Saw blade over table 135mm Safety curtain Air cushion table with 3pcs air ball nozzles, radial ventilator fan Table sizes 2650x850mm 620x850mm 2650x2550mm Pressure beam with automatic adjustment of pressure to cut length and package height Package straightener before and after the pressure beam Max package height 120mm (incl. sum of curvature and board thickness tolerance) Pusher with 12 grippers Max clamp opening (gripper) 133mm Min-max force package straightener 400/2000N Speed saw carriage forward 6-150m/min Speed saw carriage back 150m/min Forward feed speed (pusher) up to 25m/min (according to EC Europa EN1870-13) other countries 80m/min Speed feeding back up to 80m/min Push-off device 3 pcs Lift table length x width 4350x2550mm Hydraulic unit Standard version 1600mm lifting height 1.25/2.5m/min raising speed, 1.25/5m/min lowering speed Maximum load 1200 kg/m2 total 9 tons Roller track driven rollers, frequency controlled for stack on lifting table 4100x2600mm Max stack weight 6500 kg Max stack length 1060mm Slots for forklift 4 pcs, distance in the middle 1200mm, slot width 300mm Light curtain for personal protection Roller conveyor driven for package frequency controlled input to lifting table left 5600x2600mm max load 6500kg Roller conveyor driven for packages frequency controlled input to lifting table right 5600x2600mm max load 6500kg Slots for forklift 2 pcs, center distance 900mm, slot width 400mm 2 positioning stops with roller for stack alignment Light curtain (double beam) for personal protection Roller table after saw depth 4300mm, free-running ployamide rollers Angle stop at the rolling table Infeed guide two-lane (beam length 7200mm) 2-sided hardened precision guides rack and pinion drive, two-sided Input carriage (pusher) gear rack servo drive, non-contact measuring system Gripper, (scissor clamps) in pusher 12 pcs Automatic adaptation of the clamping force to the package height (progressive clamping force) can be set to 0 Pusher for panels thickness greater than 6mm,material thinner than 6mm is fed manually Kdsdpfx Abotk It Sjnsr Central cleaning system feed trough (pusher) Compressed air 6-8 bar, approx. 1600l/min Power 38 kw, 70 A. 3x400 volts, 50 Hz, operating voltage 24 VDC Dust extraction 4000m/h, air speed 30m/s Diameter connection 80mm (angle connection), 120mm /pressure beam), 150mm (sawdust channel) Total setup area without driven roller conveyors including protective grid approx: 11650x7300mm Driven roller tracks left-right 5500+5500mm Stock no: 2002125BXACEO Subject to incorrect technical data presented

Condition: ready for operation (used), Year of construction: 2023, operating hours: 150 h, functionality: fully functional, measuring range X-axis: 230 mm, measuring range Y-axis: 230 mm, measuring range Z-axis: 550 mm, workpiece weight (max.): 300 kg, empty load weight: 2,550 kg, TECHNICAL DETAILS Workpiece Data: Module range: min. 0.3 mm – max. 20 mm (0.1 – 20 mm) Helix / lead angle: min. 0° – max. 90° Inspection diameter for gears between centers: max. 400 mm Workpiece diameter: max. 490 mm Vertical measuring range (Z-axis): 550 mm (700 mm) Horizontal measuring range / rolling path (X-axis): ± 115 mm Permissible mass moment of inertia: max. 5 kg·m² Permissible workpiece weight: max. 300 kg Center distance: min. 50 mm – max. 800 mm (50 – 1,000 mm) Chart Recording: Magnification: 50x / 100x / 200x / 500x / 1,000x / 2,000x / freely selectable Longitudinal magnification: 0.5x – 1x – 2x – 4x – 5x – 10x – 20x Machine Accuracy: VDI/VDE 2612 Part 1 and 2 as well as 2613 Group I At +18 °C to +22 °C, reference temperature 0.5 K/h; 2 K/d; 2 K/m MPEE₀ ISO 10360-2 (2010): 1.8 + L/450 mm VDI2631 Radial guideway deviation: 0.2 µm Roundness Ø100/L: 0.3 µm Flick 15W/U/L: 1.5 µm Flick 50W/U/L: 1.5 µm Straightness Ø70/L: 0.4 µm Coaxiality: 1.2 µm Total runout: 1.5 µm Machine Accuracy At +15 °C to +35 °C Reference temperature: 2 K/h; 12 K/d; 2 K/m MPEE₀ ISO 10360-2 (2010): 1.8 + L/250 mm VDI2631 Radial guideway deviation: 0.4 µm Roundness Ø100/L: 0.5 µm Flick 15W/U/L: 1.8 µm Flick 50W/U/L: 1.8 µm Straightness Ø70/L: 0.6 µm Coaxiality: 1.4 µm Total flatness runout: 1.8 µm Kdodsxamnrspfx Abnjr Evaluation Software: Spur gears – external and internal helical gearing up to 60° Standards: DIN 3960 / 3962, free tolerances, AGMA 2015, ANSI B92.1, DIN 5480, ISO 1328:1995, JIS B1702:1998, JIS B1702:2016, GBT 10095:2008, ISO 1328:2013 Functions: Profile and flank line, tooth thickness variation, pitch and two-ball measurement, crowning, bevel, trapezoidal and bevel gear teeth Root and tip circle measurements, determination of tip and root diameter over up to six teeth or up to four teeth at three measuring heights or all teeth at one height on a special measuring sheet Gear Measurement Contact pattern measurement: 3 x profile and 3 x flank line Topography: 10 profiles x 10 flank lines (30 x 30 grid points) Measurement of all teeth on separate special measuring sheet Block gear measurement: up to 10 gearings Alignment measurement: up to 6 gearings and apex determination Storage formats: ASCII format, ASCII mka file, ASCII csv file (grid point deviation) Storage capacity: up to 5,000 workpiece measurement programs MACHINE DETAILS: Net weight incl. standard equipment: approx. 2,150 kg Net weight with active vibration isolation: approx. 2,550 kg EQUIPMENT - PC with software included (currently installed on machine) - Measuring probe and extensions are included - 2x calibration spheres - Surface roughness standard - 2x 3-jaw chucks for various diameters - 1x measuring mandrel for aligning the upper and lower measuring tips - Stand for dial gauge - Driver fixture for a wider range of parts - Transport locks

Condition: used, Year of construction: 2016, Overview This belt press was manufactured in 2016 by SRAML. The machine is designed for the continuous extraction of juice from crushed apples using a continuous belt pressing system. The SRAML TP50 belt press is delivered together with the SRAML JF1500 mechanized self-cleaning filter, which removes impurities such as seeds and stems. It was operational when taken out of regular production and has been maintained as backup equipment. The machine was replaced by a higher‑capacity press. Technical data  - Capacity: 700 kg/h (apples) - Application: Juice extraction from crushed apples - Configuration: Continuous belt pressing system with mechanized self‑cleaning filtration system - Filtration system: Mechanized self‑cleaning filter for removal of seeds and stems Scope of Delivery - Belt Press | SRAML | TP50 | 700 kg/h | 2016 - Self-Cleaning Filter | SRAML | JF1500 | Removal of seeds and stems | 2016 - Spare parts | Belts, rollers, bearings, self-cleaning filters with pump, gearbox, 0.75 kW motor and further wear parts Kdsdpfx Aezpffhobnjr