Dry Ball Mill

Year of construction: 1979, condition: ready for operation (used), A Gebr. Pfeiffer ball mill is available. Drive power: 330kW, diameter: 2400mm, length: 5000mm, number of motors: 2, motor weight: 180kg, flywheel width: 3.2mm. On-site inspection is possible. Kjdpfx Agsv Dwire Aodw

Year of construction: 2025, condition: new, functionality: fully functional, Professional drum dryer: SB-3000 OPTIMECH for sawdust, wood chips, peat, flax, hemp, grain, biomass, manure, corn, rapeseed, tobacco leaves, mint, herbs, copper granulate, aluminum, sand, fruit, vegetables, seeds, mushrooms, bread, etc. Complete device, ready to work. Dryers have been working for our customers for over 15 years without any problems. Machine adapted to almost any type of raw material. The raw material has absolutely no contact with exhaust fumes or fire. Drying takes place through a heat exchanger, using only hot air. No spontaneous combustion or burning of the raw material (we set the drying temperature). The dryer works best in closed rooms at an ambient temperature of at least +10°C. Efficiency: precipitation of approx. 10-15% humidity/hour; - drum rotation power supply: 1.1 kW (negligible power consumption due to the use of a large gear wheel); - hot air heater power supply: heating oil/diesel oil ON; - heating oil consumption: approx. 5 L/hour; - total electricity consumption: approx. 3 kW; - efficient Italian fans (2x 2500m3/h); - exhaust gases discharge only in one place; - mechanical steam extraction with cyclone; - rotary heat recovery (made entirely of stainless steel - acid-resistant); - safe and easy to use; - drum rotation: left/right; - control cabinet and all connections made by a qualified electronics engineer; - all spare parts available immediately, we are the manufacturer of the device; - possibility of modification according to the client's individual ideas; - at our disposal we have a complete machine park and a spacious production hall, which has been in the same place for 40 years, we do not cheat or mislead the client, we are always on the phone, we are here to help. Raw material input at a time: up to 1.5 m3. Thermal power: 40-100 kW. Drying temperature control (controller with temperature sensor). Reliable oil burner of the well-known brand: LAMBORGHINI. Possibility to buy the machine without the horizontal conveyor visible in the photos and recording. Kjdpfx Ajv D D Axsg Aodw

Condition: new, Work and Assembly Table New Machine Year of Manufacture: 2023 Kdjdekwhwzjpfx Ag Aew The ergonomic work and assembly table ErgoPlan EP1 is equipped with a bench top made from selected, solid red beechwood. The surface is waxed and polished. The stepless height adjustment under load is smooth and precise—even with asymmetrical loading of the tabletop. TECHNICAL DATA Bench top without vises: 1,700 x 640 x 120 mm 2 vise keys: - Front vise made of solid cast iron/steel construction - Rear vise with robust aluminum box guide (with adjustable guide prism and plastic slide guide) Top thickness: 120 / 60 mm Usable lift: 300 mm ErgoPlan height: 780 mm Weight of bench top: approx. 95 kg Total weight: approx. 240 kg An attached cover on the rear side serves as protection against shearing and as a pinching guard. The lifting unit is concealed in the left lifting column and thus protected from dirt and damage. Load capacity up to 400 kg Maximum overall height: 1,080 mm 2 ErgoPlan bench hooks, consisting of aluminum round bench hooks with ball locking mechanism, 30 mm, length 200 mm 1 vertical clamp for securing the workpiece from above, with 1 indexing bolt, adjustable up to 200 mm workpiece thickness, 360° swivelling Availability: short-term Location: Flörsheim

Year of construction: 2012, condition: good (used), Complete dust drying line up to 6t/h including: - Drum Drayer Instalmec CT40 - Sawdust furnace 5MW with gas mixing chamber - Moving floor rawmaterial storage Rc9Tv - Disk screen for big particles - Intermediate bin 6m3 before drum - Rotating valve - Main Fan 160kW Ksdpfx Agjvu Dq Re Asdw - Fuel storage and conveyor

Year of construction: 2004, condition: used, Ottevanger C5 Containerized Feed mill Automated grinding-mixing line with a capacity of about 5 t/h. Kedpsq Hr Rzsfx Ag Aedw Includes the following components, among others. - 55kW Hammer mill 650-375 - 11kW 1000L Mixer PM1000 - Silos - Bucket weigher - Dosing screws - Elevators - bunkers - Switchgear cabinets

Year of construction: 2018, condition: ready for operation (used), Suitable for grinding calcined coke, feed material diameter: 0-20mm, moisture feed material: under 0.1%, measurement: NEA Malvern analysis, with pendulum mill, automatic filling station, BigBag unloading station, dust filter, pipe chain conveyor, transition piece, metal separator, bunker, two-way distributor, dosing sluice, control cabinets, steel construction, documentation and additional elements, the system is still in its original packaging and has been stored for two years. Kdodpfx Agenxk Ixs Ajw

Condition: good (used), Year of construction: 2013, machine/vehicle number: AKA0003767, fuel type: diesel, color: black, power: 11 kW (14.96 HP), Year of manufacture: Jun 2013 Model year: 2013 Field of application: Construction Kodpfxjwp R A Ie Ag Aedw Empty weight: 857 kg Technical condition: good Visual appearance: good Damages: none Please contact Pedro or Arie for more information 11x Thermo-King 2013 Clip-on SG 3000: - ID 10756 - 12.148 hours - ID 10757 - 14.130 hours - ID 10758 - 16.689 hours - ID 10759 - 15.023 hours - ID 10760 - 11.946 hours - ID 10761 - 9.652 hours - ID 10762 - 12.586 hours - ID 10763 - 13.047 hours - ID 10764 - 12.474 hours - ID 10766 - 11.146 hours - ID 10767 - 13.103 hours All units have been serviced at this hours. Check our website for actual availability:

Condition: used, Year of construction: 1995, operating hours: 10,000 h, functionality: fully functional, total width: 2,900 mm, total length: 9,500 mm, Ball mill 3.2 m x 5.4 m, weight 44 tons, in perfect working condition, without ball charge, complete with drive by 250 kW motor-gearbox, rubber lining, single-chamber type, feed through 90° bent pipe, distributor with blades, discharge through perforated wall (not overflow), air flow by suction via Atlas Copco compressor, FDI filter. Kjdpfxjxbwtze Ag Asdw