Used Screw Capper for sale (5,540)

Condition: excellent (used), Year of construction: 2012, operating hours: 35,741 h, functionality: fully functional, Screw compressor Atlas Copco GA15VSDFF. Integrated dryer and inverter. 15 kW, 13 bar, 2.91 m3/min. Laedpfx Afex Igzkjfek

Condition: new, Screw compressor with refrigeration dryer Lodpfx Afswm Ih Aefoak Belt-driven. Space-saving. Affordable. Easy operation thanks to Infologic² Basic control. Efficient compressor stage. Perfect solution for industrial and trade businesses. Impressive compressed air quality Features in detail: Compression concept: Oil-lubricated screw compressor Cooling: Air-cooled, efficient cooling system Drive: Efficient IE3 motor, belt drive Control: Fixed speed Control: Infologic² Basic control unit Refrigeration dryer: Attached, refrigerant R513A Receiver: Horizontal, painted, manufactured according to AD2000 Performance data: Flow rate at operating pressure 9.5 bar: 0.98 m³/min Operating pressure min. / max. 5.5 / 10.0 bar Total power consumption at 9.5 bar / full load: 9.6 kW Rated motor power; IP55 7.5 kW Oil volume 3.2 lt Pressure dew point of refrigeration dryer (20°C 100% RH) approx. +3 °C Installation data: Ambient conditions min. / max. 1 / 46 °C ΔT above cooling medium temperature 2 °C Cooling air requirement 756 m³/h Free fan pressure 30 Pa Noise level 68 dB(A) Voltage / PH / Frequency 400 / 3 / 50 V / Ph / Hz Refrigeration dryer power (230V/50Hz) 0.27 kW Dimensions and weight: Length x width x height 1540 x 665 x 1350 mm Weight 240 kg Compressed air outlet G 1/2" female Compressed air tank capacity 270 lt INCLUDES OPTION: Aftercooler C43 MINI (so that the Condensate accumulation is reduced to a minimum)

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Compressor: Manufacturer: Kaeser Type: SM 12 Year of manufacture: 2016 Power: 7.5 kW Lajdpfx Afewx I Ruefsk Operating pressure: 8 bar Refrigeration dryer: Manufacturer: Kaeser Type: ABT 12 Year of manufacture: 2016 Refrigerant: R-134a Tank: Manufacturer: BWB Behälter-Werk Year of manufacture: 2016 Max. pressure: 11 bar Capacity: 270 liters After oil and filter inspection (replacement) Technical condition: perfect! PRICE REDUCTION FROM EUR 4,950 TO EUR 3,950!!! ONLY UNTIL THE END OF THE YEAR!!!

Condition: used, Year of construction: 2003, Screw compressor, compressor, compressed air unit, stationary compressed air compressor -Handover in its current condition as inspected -defective, not functioning, problem: frequency converter does not communicate with the software -Delivery rate: 3.2-6.9 m³/min -Engine power: 18-24 kW -Structure: encapsulated -Max. pressure: 12.75 bar -Operating hours: 108252 h -Load hours: 30754 h -Year of manufacture: 2003 -Dimensions: 1850/850/H1900 mm -Weight: 592 kg Ledpfx Ajhabk Djffsak

Condition: used, Used Hosokawa model 35-MSC-44 nauta conical double screw mixer. - Working volume: 3125 litre. - Working pressure: Atmospheric. - Product contact parts: Stainless steel 1.4301. - Cone has dimensions (approx.): 2334 mm diameter x 3366 mm cone height / 4609 mm total height (bottom edge of discharge valve - drive). - Top semi-circular covers: 1x hinged cover with safety mesh, 1x bolted cover with man way and flange DN400 - Non-supported screw agitators (double screw design): driven by 11 kW, 1500 rpm, 400 V electric motor, final rpms of screws 70 rpm - Arm: driven by 1.1 kW, 1500 rpm, 400 V electric motor, final rpms of arm 0.82 rpm - Lump breaker: driven by 5.5 rpm, 1500 rpm, 400 V Ledpjx H Sg Nofx Affjak - Includes: inspection doors at the bottom of cone (approx. 800 mm height x 500 mm wide at the top / 250 mm wide at the bottom), discharge valve. - Mounted: (3) lugs.

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, KAESER M130 portable compressor with integrated air dryer (aftercooler), after full service. Technical specifications: Output: 10.70 m3/min; Ljdpfjxb Aa Hsx Affoak Operating pressure: 12 bar; Year of manufacture: 2016; Engine: DEUTZ; Operating hours: 2363 h The compressor is fully functional, service provided. Net price: PLN 89,500 Gross price: PLN 110,085 Below is a link to a video.

Year of construction: 2019, condition: excellent (used), functionality: fully functional, Farmet FL200 screw press for rapeseed/sunflower/soybean, with final geometry, in a really good condition. Motor 22kw, capacity 400kg/h (with prepress 500kg/h), lamels and geometry checked, and in a good shape. Lasdpsxa Hy Uofx Affek Paired with extruder Farmet FE500 (from our offer) it can process soybean at 400kg/h

Condition: new, Screw compressor AGRE Model Sonetteo 7,5+ 10 Screw compressor compact unit incl. refrigerant dryer and DL tank 270 lt. Belt driven. Space saving. Inexpensive. Easy operation thanks to Infologic² Basic control. Efficient compressor stage. Perfect solution for industrial and craft businesses. Convincing compressed air quality. Mounted refrigeration dryer. Equipment in detail: Compression concept: oil-lubricated screw compressor Cooling: air-cooled, efficient cooling system Drive: Efficient IE3 motor, belt drive Control: fixed speed Lodpfx Afjhun Tzsfjak Control: Infologic² Basic control unit Refrigerant dryer: Mounted, refrigerant R513A Tank: 270 lt. horizontal painted 11 bar Motor power: 5,5 kW Pressure: 10 bar Delivery rate: 780 lt./min incl. time controlled condensate drain Dimensions L x W x H = 1500 x 1350 x 600 mm

Condition: used, Year of construction: 2017, operating hours: 20,000 h, functionality: unexamined, machine/vehicle number: GA11VSD+FF, Compressor compressed air system Atlas Copco Consisting of: Compressor GA18 Plus, year of manufacture 2007 Compressor GA11VSD+FF, year of manufacture 2017 Control ES 6 The buyer must take care of the professional dismantling himself. Ledpovx Nmfsfx Affsak Forklift is provided.

Condition: good (used), Year of construction: 2008, Mono pump, dosing pump, high-pressure pump, water pump, screw pump, progressive cavity pump Lsdpfxeb A Igme Affjak -Pumps: for tunnel boring -Adjustable speed: 120-600 rpm -Drive: 5.5 kW -Speed: 20-220 rpm -Pump capacity: 80-100 l/min -Max. pressure: 16 bar -Pipe connection diameter: DN 100 -Dimensions: 3900/470/H1070 mm -Weight: 722 kg

Condition: as good as new (ex-display), Year of construction: 2000, functionality: fully functional, Bucher Screw conveyor to discharge the pomace from the fruit press. Complete stainless steel with screw coated. Motor 7,5 kW. R/min 1400/125. Length 790 cm, width 70 cm. Lsdpfx Afeuu Itfofoak

Condition: excellent (used), Meat grinder Omega 32. Wihout stand 1900 € Lajdex Ndqrepfx Affjk With stand 2100 €

Condition: excellent (used), Year of construction: 2013, operating hours: 18,281 h, functionality: fully functional, Kaeser SM12 screw compressor, 7.5 kW, with 8 bar and 1.20 m3/min. Excellent condition. Laodpfx Aox Hyykeffsk

Condition: new, AGRE ALUP ALLEGRO 14+ 13 270 Speed controlled. Space-saving. Inexpensive. Laodpfx Asixt I Hsffok Efficient 1:1 direct drive. Easy operation. Low energy consumption. High performance. Suitable for a wide range of applications. Convincing compressed air quality. Cyclone separator and refrigeration dryer built in. Equipment in detail: Compression concept: Oil-lubricated screw compressor Cooling: Air-cooled design Drive: High frequency motor, with 1:1 direct drive Control: Speed controlled with frequency converter Control: Graphic control C55DD Refrigerant dryer: Integrated, refrigerant R513A Filtration: incl. cyclone separator Container: horizontal, painted Performance data: Volume flow at operating pressure 7.0 bar = 0.26-2.26 m³/min Operating pressure min. / max. 5.0 / 12.5 bar Total power consumption at 10.0 bar / full load 16.2 kW Rated power motor 15 kW Oil quantity 5.2 lt Dimensions and weight: L x W x H = 1655 x 655 x 1550 mm weight 400 kg Compressed air outlet G 3/4'' Capacity compressed air tank 270 lt

Condition: used, Used stainless steel twin screw cooling conveyer by AMF (Apener Maschinenbau und Forderanlagen Gustav Bruns GmbH & Co KG) model HDS 250 x 3500. Machine has two stainless steel screws with total length 3500 mm and working length about 3000 mm. Screws are driven by el motor 1.1 kW and reducer. Working rotation of screws up to 2.7 rpm. Each screw has a internal channel and is connected to cooling medium. Working pressure inside the shafts - up to 1.5 bar, temperature range from -10C up to +30C, volume - 2 x 18 l. Screws are working in jacketed tank. Width of tank 570 mm x length 3500 mm. Tank has volume about 430 l and is working on atmospheric pressure. Temperature range from -10 up to 0C. Tank has stainless steel jacket at bottom and side walls. Volume of jacket 40 l, working pressure up to 1.5 bar, working temperature range - from -10C up to +30C. Top of the tank is equipped with 3 stainless steel lids, each with lenght 90 cm. Cover under the section where discharge is located is equipped with inspection manway with diameter 30 cm and stainless steel round lid. Inlet to conveyer has dimensions: 30 cm x 55 cm. Outlet has dimensions 28 cm x 30 cm. Machine has local control panel and is mounted on 4 wheels. Last time used in food industry. Laedpfx Afox Hwd Hsfok

Condition: good (used), Screw clamps with shaft, pipe clamps, pipe fastening -DN: 10/12 -DN: 20/22 Laodpeb A Sl Sofx Affsk -DN: 25/28 -DN: 50/55 -DN: 65/70 -DN: 80/85 -DN: 100/102 Price: complete Package weight: 11.5 kg

Year of construction: 2018, condition: used, For sale is a fully functional used screw conveyor with a screw diameter of 50 cm. The device has operated for several months in a line feeding vegetables to a peeler. SCREW CONVEYOR Type PSL.U500/1.8 • Device intended for feeding vegetables into the peeler infeed hopper • Infeed hopper adapted for manual feeding, H=800 mm • U-section trough, 500 mm; Length approx. 2700 mm • Discharge height to peeler infeed approx. 1800 mm • Cleaning port in the lower part of the trough; Operating angle approx. 45° • Bearings mounted outside the working section; Lower shaft sealing with packing Ledpfexnrr Sex Affeak • Structure mounted on adjustable feet and wheels • Feeding speed adjustable by frequency inverter, external potentiometer on the control panel • Acid-resistant (stainless steel) control panel mounted according to arrangement • Electrical supply: Power 2.2 kW, ~3x380 VAC, 50Hz

Condition: good (used), Year of construction: 2012, operating hours: 13,327 h, functionality: fully functional, overall weight: 300 kg, power: 7.5 kW (10.20 HP), fuel type: electric, volume flow: 57 m³/h, pressure (max.): 10 bar, type of cooling: air, Equipment: documentation/manual, type plate available, Renner screw air compressor with refrigerated dryer and compressed air tank, year of manufacture 2022, with 250 l capacity and inspection opening. Delivery rate 950 l/min. Laedpfox Nautsx Affok

Condition: used, Year of construction: 2013, Lathe, used Manufacturer: WEILER Model: DA 210 AC x 1500 Year of manufacture: 2013 Ljdpfex I S I Nsx Affeak Swing diameter over bed: 435 mm Swing diameter over support: 245 mm Center distance: 1,500 mm Speed range: 20 - 2,000 rpm (2 ranges, infinitely variable) Spindle bore: 52 mm Equipment: - Infinitely variable speed control - HEIDENHAIN 3-axis digital readout - Multifix toolpost + 10 tool holders - 3-jaw chuck RÖHM DURO - 4-jaw chuck RÖHM - Collet chuck Fahrion + approx. 33 collets - Fixed and travelling steady rests - Various live/dead centers + drill chuck (see photos) - Coolant system - Documentation The machine was used in-house by a manufacturer of automation technology for their own products. The machine has been tested for basic functions; everything worked except for the spindle brake.

Condition: new, AGRE ALUP SCK 10-10 270+ Belt driven. Space saving. Inexpensive. Easy operation. Perfect solution for industrial and craft businesses. Convincing compressed air quality. Built-in refrigerant dryer. Sound-insulated screw compressor with V-belt drive on compressed air receiver 270 l with built-in refrigeration dryer, integrated cyclone separator, with electronic condensate drain and C55 graphic control. Equipment in detail: Compression concept: oil-lubricated screw compressor Cooling: air cooled Drive: Efficient IE3 motor, belt drive Control: fixed speed Control: Aircontrol 5.0 Refrigerant dryer: attached, refrigerant R513A Filtration: incl. cyclone separator Tank: horizontal, painted, manufactured according to AD2000 Performance data: Volume flow at operating pressure 9.5 bar = 1.06 m³/min operating pressure min. / max. 5,5 / 10,0 bar Total power consumption at 9.5 bar / full load 10.2 kW Rated power motor; IP55 7.5 kW Oil quantity 4 lt Dimensions and weight: L x W x H = 1530 x 662 x 1531mm weight: 310 kg Lajdpfxeixt H Nj Affjk Compressed air outlet: G 1/2'' Compressed air tank capacity: 270 lt

Condition: ready for operation (used), Two identical compressors with integrated refrigerated dryer are offered. Pressure dew point: +3°C, rated power: 30kW, delivery rate (FAD): 5.31m³/min at 8bar, 4.77m³/min at 10bar, 3.86m³/min at 13bar, control: Boge Autotronic, fully automatic operation. Inspection is possible by arrangement. Ljdpfsx I Rqpsx Affoak

Condition: good (used), Screw clamps, pipe clamps, pipe fixings -DN: 20/22 -DN: 25/28 -DN: 32/34 Ledpfxjb A Sl Rj Affjak -DN: 40 -DN: 50/52 -DN: 65/70 Price: complete Package weight: 21.5 kg

Condition: excellent (used), functionality: fully functional, Palmia SKIT 400 screw conveyor Manufacturer: Palmia Type: SKIT 400 Machine number: 4930 Screw: stainless steel Screw diameter: 400 mm Lifting height: 2600 mm Overall dimensions: 3900 × 1300 × 3400 mm Lajdpjx I N Dbefx Affjk The mobile Palmia SKIT 400 screw conveyor is a specialised device designed for vertical transport of bulk and semi-bulk materials, thanks to its 400 mm transport screw. The screw mechanism ensures a continuous and efficient material flow, allowing for effective movement of products up to a height of 2600 mm without the need for additional equipment.

Condition: good (used), Year of construction: 1998, Screw Compressor with Refrigeration Dryer KAESER Air Tower 11 Operating hours approx. 68,980 h Maximum operating pressure 9.5 bar Free air delivery at 7.5 bar: 1,145 l/min Motor power 7.5 kW Integrated KAESER refrigeration dryer automatic condensate separator incl. oil-water separator Kaeser Aquamat CF3 incl. oil-water separator Kaeser Aquamat CF6 Dimensions approx. L x W x H = 625 x 670 x 1285 mm Weight approx. 270 kg Note on used machines: • Technical data subject to errors and prior sale. • Prices stated are ex works – free loading! • The machines have been cleaned and function tested. • All machines are sold as seen, without any warranty or guarantee. Laodpfx Afextbpkofsk Buyers are welcome to inspect the machines on site. • Special agreements are only valid if confirmed in writing. (We only respond to inquiries that include your address and telephone number!)

Condition: excellent (used), functionality: fully functional, Karl Schnell screw conveyor (screw elevator) Manufacturer: Karl Schnell Type: 642 Machine number: 1091 Screw: stainless steel Screw diameter: 400 mm Lift height: 940 mm Overall dimensions: 2500 × 1000 × 2000 mm The Karl Schnell type 642 screw conveyor is an industrial conveying device designed for vertical or slightly inclined lifting and transport of bulk or granular materials. Its screw mechanism provides continuous and uniform material flow without clogging, making it ideal as a component in conveying installations and production lines. Ledpfxex I Nrxo Affjak Equipped with a 400 mm diameter stainless steel screw and robust construction, the lift is characterized by its durability and high reliability. Its design allows for easy movement within the facility and adaptation to specific process requirements.