Used Screw Capper for sale (5,317)

Year of construction: 2012, condition: excellent (used), Carlyle/Carrier Screw Compressor 400/3/50hz Laodpfx Afsfmmrbetsd Displ.: 504m3/h. Cooling agent: R134a electr.Cap. 93KW with receiver

Condition: new, Ball screw drive Diameter 63, pitch 50mm, IT3 Laodpfx Afezi Dzbotod STEINMEYER

Condition: excellent (used), Year of construction: 2016, volume flow: 2.2 m³/h, pressure (min.): 8 bar, ATLAS COPCO GA 11 VSD + screw compressor Variable speed drive (inverter controlled) 11 kW motor Lsdpeytyh Hefx Aftead Capacity: 1.95 m3/min Pressure: 13 bar Year of manufacture: 2016 Operating hours: 9270 hours

Condition: used, Year of construction: 1984, Glass bottle filler and capper equipped with short-tube filling valves for filling bottles to a specific level (volume filling). The bottles are pre-evacuated (11 kW vacuum pump from GEA Ahlborn). Additional title: Short-tube filler with pre-evacuation and crown cap sealer Capactity: 44000 bo/h Number of filling valves: 90 pcs. Number of capping heads: 15 pcs. Formats: 0,5 l NRW bottles; crown caps Material: housing and contact surfaces from stainless steel Base construction: caroussel-type filling and capping block Lajdpfxezi Alxe Aftsd Features: filling carousel with 90 short-tube filling valves; crown cap sealer with 15 sealing heads; vacuum pump; bottle and cap rinse; bottle conveyor with drives and format components; protective housing with doors; control cabinet with fittings; control panel with touchscreen

Condition: good (used), Year of construction: 2012, Ingersoll Rand screw compressor Lasdsu Ic Ryspfx Afted 225 Kw Year 2012

Condition: good (used), Year of construction: 2004, operating hours: 35,000 h, functionality: fully functional, power: 15 kW (20.39 HP), type of cooling: air, Equipment: refrigerant dryer, Almig screw compressor flex 15 Drive (year of manufacture 2004) – including MDX 3600 air dryer (year of manufacture 2011) – well-maintained, inspected, and ready for use. For sale is an Almig screw compressor flex 15 Drive (year of manufacture 2004, 15 kW power) in well-maintained, technically flawless condition – including a matching MDX 3600 air dryer (year of manufacture 2011). The compressor has been regularly maintained and is in very good condition both visually and technically. It is fully functional, inspected, and ready for immediate use. The included MDX 3600 air dryer reliably provides dry, clean compressed air, thus protecting your downstream equipment and tools. With our comprehensive all-inclusive package, we can personally take care of the complete service for you – from delivery to commissioning of your new compressor. This includes unloading, installing, and aligning the system. Subsequently, our experienced service technicians will professionally commission the system, perform all necessary functional tests, and ensure that your Almig flex 15 Drive, together with the MDX 3600 air dryer, runs reliably and efficiently. In addition, we offer individual training sessions for your employees so that you can optimally utilize the system from the very beginning. We will also be happy to continue to support you after installation – whether for maintenance, technical questions, or future expansions. With our comprehensive all-inclusive package, you don't have to worry about anything – we ensure that everything runs smoothly and that you can focus entirely on your production. Our service promise: Quality, competence, and customer satisfaction are our top priorities. Laodozlgmfspfx Aftod Our team consists of qualified and experienced technicians who specialize in compressed air and compressor systems, as well as other machinery. We place great emphasis on personal support and are always happy to assist you even after the purchase. You also have the opportunity to inspect and test the system at any time in our workshop. You are cordially invited to come to our location and see for yourself the condition and functionality. With us, you are in the best hands – professionally, reliably, and with a passion for machines! PS CNC Service Germany GmbH & Co. KG All information without guarantee.

Year of construction: 2020, operating hours: 50 h, condition: like new (used), functionality: fully functional, machine/vehicle number: BV200219443, 🔥 Pyrolytic Cleaning of Screws – DEMO Unit | up to Ø70 mm | Fully Automatic | 12 months warranty Efficient and safe solution for removing polymer residues from screws used in extrusion and injection molding – no deformation, no manual cleaning required. Completely made in the European Union. _____ Key Features • Suitable for all thermoplastic materials • Max. screw diameter: Ø70 mm • Vertical process – no screw deformation • Fully automatic operation (no operator required) • Cleaning time: 3–8 hours (depending on contamination) • Process temperature: 400–500 °C • Integrated gas treatment system with water tank and pump _____ Technical Data (Type PC-70) Lsdpjy Id Tqofx Aftsad • Max. screw diameter: 70 mm • Max. screw length: 2,450 mm • Max. working height: 3,200 mm • Total power input: 25 kW _____ Condition • DEMO unit – directly from manufacturer • Excellent condition with full 12 month factory warranty. • Available immediately FCA BOCO price: 27 990,- EUR w/o VAT _____ Manufacturer BOCO Pardubice Machines, s.r.o. (Czech Republic) Over 30 years of experience in plastics processing technology

Condition: excellent (used), Year of construction: 2015, Worthington Creyssensac RLR208B500G10 Air compressor Lajdpfx Aowtqufefted 2015, air compressor and dryer, 8Bar, mounted on 500L tank, 3Ph

Year of construction: 2019, condition: excellent (used), functionality: fully functional, Farmet FL200 screw press for rapeseed/sunflower/soybean, with final geometry, in a really good condition. Lodpfx Aexa Hy Usftjad Motor 22kw, capacity 400kg/h (with prepress 500kg/h), lamels and geometry checked, and in a good shape. Paired with extruder Farmet FE500 (from our offer) it can process soybean at 400kg/h

Condition: used, Year of construction: 2023, Overview This Braumanufaktur Werk II Fillmaster R18 is a compact isobaric rinsing, filling and crown-capping monoblock for glass bottles, built in 2023 by Braumanufaktur Werk II (Großalmerode, Germany). It is sold as a complete craft-scale bottling set for carbonated beverages together with a 750 L fermentation and carbonation tank (SM Inox, 2021) and a 330 L pressure loading tank (SM Inox, 2023). The monoblock combines 6 rinsing stations, 6 isobaric filling valves and 6 crown-capping heads in a single compact unit. CO₂ pre-saturation of the bottles before filling reduces oxygen pickup and product oxidation. Mechanical movements are driven by a pneumatic system (6 - 8 bar); filling parameters, production data and bottle counters are managed via the Siemens SIMATIC HMI touch panel. The line is still installed and under power, and basic functionality can be demonstrated on site. Technical data - Manufacturer: Braumanufaktur Werk II GmbH (Großalmerode, Germany) - Model: Fillmaster R18 - Year of manufacture: 2023 - Machine type: isobaric rinser - filler - crown capper monoblock, glass bottles - Rinsing stations: 6 / filling valves: 6 / capping heads: 6 - Capacity: approx. 500 - 650 bph (semi-automatic, operator-dependent) - Filling system: isobaric, with CO₂ cylinder connection for bottle pre-saturation - Bottle formats: currently set up for 0.375 L glass; adaptable to other crown-cap formats - Crown caps: 26 or 29 mm, all sizes configurable - Control: Siemens SIMATIC HMI touch panel (filling parameters, production data, bottle counter) - Compressed air: 6 - 8 bar - Power: 230 V, 5 A - Dimensions: approx. 870 x 930 x H 1,910 mm Equipment Laedjziuazopfx Afted - SM Inox FBTB 750 L PED fermentation and carbonation tank (2021): domed bottom, pressure lid, double insulated jacket with glycol circuit fed by an external heat pump, dedicated control panel for temperature, agitator and CO₂ injection (automatic / manual), carbonation stone fed via solenoid valve; PED Cat. III, approx. Ø 955 mm - SM Inox FCTC 330 L loading tank (2023): pressure lid with CO₂ inlet for pump-free liquid transfer between tanks, approx. Ø 640 mm - Mobile transfer / washing pump on stainless trolley - OEM technical documentation (operating manual, PLC instructions, quick guide) and declarations of conformity Condition Used - very good condition with light use: the PLC production counter reads approx. 58,600 bottles / 12,000 litres in total. Still installed and under power; the sale takes place because the owner has discontinued production. Availability Immediately. Location: Italy. Preparation, dismantling and truck loading by the seller (EXW loaded). The machine can be visited and demonstrated on request.

Condition: excellent (used), Year of construction: 2013, operating hours: 29,558 h, functionality: fully functional, Screw compressor, Atlas Copco GA55FF Dryer integrated 55 kW Laedpozil Iisfx Aftsd 9.75 bar 8.94 m3/min Year of manufacture: 2013 Operating hours: 29,558

Condition: excellent (used), Year of construction: 2019, Technical data: Pressure 10 bar Flow rate 1080 l/min Voltage 400 V Drive power 7.5 kW Weight 431 kg Noise level 63 dB(A) Air outlet 3/4" Dimensions (WxDxH) 1950 x 690 x 1700 mm with integrated refrigeration dryer, automatic condensate drain, oil-water separator Laodpfx Afexq Elwjtjd

Condition: used, Year of construction: 1999, Overview This SASIB SIMONAZZI (today SIDEL) EUROSTAR 80/20 is an isobaric rotary filling and crown-capping monoblock for glass bottles, equipped with 80 filling valves (pitch 110 mm) and a 20-head Arol crown capper. The machine currently fills cider and carbonated soft drinks at up to 8 g/l CO2 in glass formats from 25 cl to 1.5 L. It is still installed and under power, remains in production until end of October 2026 (week 43), and can be visited in operation on request. Technical data - Manufacturer: SASIB SIMONAZZI (today SIDEL) - Model: EUROSTAR 80/20 - Year of manufacture: 1999 - Machine type: isobaric filler capper (monoblock) for glass bottles - Filling valves: 80 (pitch 110 mm) - Capping: 20 Arol crown heads, crown 26 and crown 29 (2 cap distributor bowls) - Products: cider, carbonated beverages (up to 8 g CO2) - Formats: 25 cl / 27.5 cl / 33 cl / 50 cl / 75 cl / 100 cl / 150 cl - Capacity: up to 22,000 bph (25-50 cl), approx. 16,000 bph (75 cl), approx. 12,000 bph (1.0-1.5 L) - Dimensions: approx. 560 x 430 x H 305 cm - Weight: approx. 13,700 kg - Power supply: 27.11 kW installed - Air supply: 8-12 bar, approx. 795 Nl/min Equipment - Format change parts for the listed formats (star wheels, guides, conveyor curves) - Spare parts package - OEM technical documentation and machine layout drawing Lasdpezic Efefx Afted Not included: cap feeding system, CIP, product mixer. Condition Used - in production, still installed and under power. Last major maintenance: April 2026. Availability From end of October 2026 (week 43). Location: France. Dismantling, handling, packing and truck loading can be quoted on request (EXW).

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, Compressor: Manufacturer: Kaeser Type: SM 12 Year of manufacture: 2016 Power: 7.5 kW Operating pressure: 8 bar Refrigerant dryer: Manufacturer: Kaeser Type: ABT 12 Year of manufacture: 2016 Refrigerant: R-134a Tank: Manufacturer: BWB Behälter-Werk Year of manufacture: 2016 Design pressure: 11 bar Capacity: 270 liters After oil and filter inspection (replacement) Ledpfewx I Rusx Aftjad Technically in perfect condition! PRICE REDUCTION FROM 4250 TO 3550 EUR!!!

Condition: used, Year of construction: 2026, Overview This blowmoulder, filler and capper combiblock was manufactured by ACMI (Italy). The machine can be operated fully floor level and is a very good solution offering the advantage of a dual-cavity design (one mold = two bottles up to 70mm diameter) achieving an up to 17% reduced footprint vs equivalent output from traditional single-cavity equipment, improving production line accessibility. The increased output on smaller formats allows better utilisation of downstream equipment in the production line, resulting in improved ROI of total investment (100% additional output on smaller formats with less than 36% additional CAPEX). The BLO2FILL ESF 12/120/20 is designed for the production of PET bottles and subsequent filling and capping in a single integrated system. The machine is suitable for carbonated water, still water and carbonated soft drinks.  Technical data - Capacity: up to 48,000 bph (500 ml PET) - Formats: 500 ml PET bottles - Application: Blowing, filling and capping of PET bottles - Configuration: - Rotary stretch blow moulding machine SBF412 (2-cavity configuration) - Electronic-volumetric filler with 120 valves - Fully electronic capper (FEC) with 20 heads - Neck finish: 26/22 GME 30.40 - Cap type: Plastic screw flat / press-on caps Ljdpfx Asyzc Hpjftead - Filling technology: Electronic-volumetric - Products: Carbonated water, still water, carbonated soft drinks - CO₂ content: up to 8.5 g/l - Max. filling temperature: up to 18°C (carbonated water), 25°C ambient, 12°C (soft drinks) Scope of Delivery - Blowmoulder | Acmi | SBF412 | Rotary stretch blow moulding machine (2-cavity) - 100% r-PET and lightweight preform compatible - Filler | Acmi | ESF | Electronic-volumetric filler with 120 valves - Capper | Acmi | FEC | 20-head capper for screw and press-on caps - Cap Feeder | Operator level waterfall orientation and feeding - Preform orienter |Operator level preform feeding - Preform insertion control | Control system - Blowing air recovery system | For pre-blow and line - Cooling system | Water recirculation on combo interface - Automation package | PLC teleservice, Ethernet, UPS, remote access - Lubrication system | Automatic centralized lubrication - Foaming unit | Automatic system

Condition: used, Year of construction: 2004, Overview  This semi-automatic corking machine was manufactured in 2004 by the Italian company Borelli. The ALEXA S15 model is designed for medium-sized production facilities handling various glass bottle formats between 0.375 L and 2 L. The machine is in working condition, easy to operate, and suitable for wineries or producers of cork-closed beverages. Technical data Lasdpfxjyb S Hdj Aftsd - Application: Glass bottles with natural or synthetic corks - Capacity: Up to 1,050 bph - Bottle Volume Range: 0.375 L – 2.0 L - Bottle Diameter Range: 60 – 160 mm - Bottle Height Range: 240 – 370 mm - Cork Diameter Range: 21 – 29 mm - Cork Height Range: 33 – 45 mm - Height Adjustment: Manual turret height adjustment via rear control wheel - Distance from bottle mouth to centering head: 15–25 mm  

Condition: used, Year of construction: 2016, Overview This compact capping machine was manufactured by the German company ALWID in 2016. Major components are made of stainless steel. It is designed to process t-cork glass bottles as an inline system. The machine is equipped with a capping head for Ø34/19 mm and height 22/13 mm t-corks. Due to our relation to ALWID, we can offer change over parts for different bottles and caps immediately.   Laedjxb Uncepfx Aftod Technical data: - Mobile stainless steel frame - T-cork head for Ø34/19 mm and height 22/13 mm - cap-chute for Ø34/19 mm and height 22/13 mm - Sorting unit via vibrating feeder bowl with noise insulation hood - Conveyor belt - Stopper - Protective housing with safety switch - Electrical control via SIEMENS Logo

Condition: used, Year of construction: 2000, Overview  This solo cork capper was manufactured in 2000 by Italian company BERTOLASO. The machine was used for capping glass bottles with corks in a cider production line and is immediately available. Production at the original facility ceased in 2022. Technical data  - Capacity: From 9,000 bph to 12,000 bph - Formats: 75 cl glass bottles Ljdpowhwvljfx Aftsad - Application: Cork caps for cider bottles Scope of Delivery - BERTOLASO DELTA 512 S solo capper

Condition: excellent (used), Year of construction: 2015, ATLAS COPCO XAHS186 portable compressor, equipped with an end cooler, after a complete service. Technical data: capacity: 10.50 m3/min; working pressure: 12 Bar; year of manufacture: 2015; DEUTZ engine, 104 kW; mileage: 2016 hours. The compressor is in perfect working order, ready for operation, and comes with a warranty. Net price: 109,500 PLN Gross price: 134,685 PLN Lasdpfxszk Amxj Afted The machine was imported in perfect condition and has all the necessary documents for registration. Links to videos are provided below.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, KAESER M31 diesel compressor – in perfect condition, fully serviced, ready for registration!!! Technical specifications: capacity: 3.15 m3/min year of manufacture: 2015 engine: KUBOTA engine power: 24.1 kW Lajdpfx Aezky Rzjftod operating hours: 1319 h The machine has been imported and is fully functional, ready for operation. net price: 29,500 PLN gross price: 36,285 PLN Below is a link to a video showing the machine in operation.

Condition: excellent (used), Year of construction: 2015, ATLAS COPCO XAS137 portable compressor, equipped with an aftercooler, fully serviced. Technical data: flow rate: 7.70 m3/min; working pressure: 7 bar; year of manufacture: 2015 Ledpfezky Nkex Aftjad engine: KUBOTA operating hours: 2000 h compressor in perfect working order, ready for operation, with warranty. net price: 59,500 PLN gross price: 73,185 PLN machine imported in excellent condition. Links to videos are provided below.

Condition: new, AGRE ALUP SCK 10-10 270+ Belt-driven. Space-saving. Cost-effective. Lajdpfxjixt H No Aftod Easy to operate. Perfect solution for industrial and craft businesses. Convincing compressed air quality. Refrigerant dryer installed. Sound-insulated screw compressor with belt drive on a 270 l compressed air tank, with integrated refrigerant dryer, integrated cyclone separator, electronic condensate drain, and C55 graphic control. Features in detail: Compression concept: Oil-lubricated screw compressor Cooling: Air-cooled Drive: Efficient IE3 motor, belt drive Control: Fixed speed Controller: Aircontrol 5.0 Refrigerant dryer: Mounted, refrigerant R513A Filtration: Incl. cyclone separator Tank: Horizontal, painted, manufactured according to AD2000 Performance data: Volume flow at operating pressure 9.5 bar = 1.06 m³/min Operating pressure min. / max. 5.5 / 10.0 bar Total power consumption at 9.5 bar / full load 10.2 kW Rated motor power; IP55 7.5 kW Oil quantity 4 liters Dimensions and weight: L x W x H = 1530 x 662 x 1531 mm Weight: 310 kg Compressed air outlet: G 1/2'' Compressed air tank capacity: 270 liters

Condition: new, Screw compressor AGRE Model Sonetteo 7.5+ 10 Compact screw compressor unit including refrigerant dryer and compressed air tank, 270 liters. Belt-driven. Space-saving. Economical. Lasdpfshun Tzex Aftjd Easy operation thanks to the Infologic² Basic control system. Efficient compression stage. Perfect solution for industrial and craft businesses. Convincing compressed air quality. Refrigerant dryer installed. Detailed features: Compression concept: Oil-lubricated screw compressor Cooling: Air-cooled, efficient cooling system Drive: Efficient IE3 motor, belt drive Control: Fixed speed Control system: Infologic² Basic control unit Refrigerant dryer: Installed, refrigerant R513A Tank: 270 liters, horizontal, painted, 11 bar Motor power: 5.5 kW Pressure: 10 bar Delivery rate: 780 liters/min Including time-controlled condensate drain Dimensions L x W x H = 1500 x 1350 x 600 mm

Condition: reconditioned (used), screw conveyor diameter: 60 mm, Plasticizing unit – DEMAG screw assembly, screw-cylinder unit, 60mm diameter. Complete with RSP, heating bands, etc. Condition: Production-ready, overhauled. Suitable for: EE 840 / Injection weight: 570g = 636cm³ Ljdpjzkw Abjfx Aftoad EE 1450 / Injection weight: 690g = 763cm³ EE 2300 / Injection weight: 800g = 891cm³

Condition: new, Made in Italy Machine manufactured according to DIN 8606 Maximum turning height: 260 mm Turning diameter over bed: 520 mm Turning diameter over slide: 300 mm Distance between centers: 1,500 mm Bed width: 400 mm Spindle bore: 82 mm Spindle nose: Camlock 8" Spindle speeds: (24) 9 - 1600 rpm (Option 11 - 2000 rpm) Motor power: 5.5 kW (Option: 7.5 kW) Feed rate, Z-axis: (93) 0.028 - 6.43 mm/rev Feed rate, X-axis: (93) 0.012 - 2.73 mm/rev Ljdpodvm Eujfx Aftoad Threads, metric: (54) 0.5 - 224 mm Threads, Whitworth: (55) 72 - 1/8 TPI Threads, module: (54) 0.5 - 112 mm Threads, diametral pitch: (54) 64 - 1/4 D.P. Cross slide, WxL: 650 x 230 mm Cross slide travel: 340 mm Top slide, WxL: 350 x 150 mm Top slide travel: 150 mm Tailstock spindle diameter: 85 mm Tailstock spindle travel: 200 mm Tailstock taper: MK 5 Weight: approx. 3,100 kg Equipment: - Tailstock movement with pneumatic assistance - Acceptance test report according to DIN 8605, lathe with increased accuracy - Mechanical dual clutch - Electromagnetic brake - Rapid traverse for X and Z axes - Electrical equipment made of high-quality brand components, e.g. Siemens/Schneider - Lubrication of guide rails via hand pump - Reducing sleeve - 2 fixed centers - All safety devices according to CE standards: Chuck guard with plexiglass pane, secured with microswitches. Tool holder guard with plexiglass pane. Rear splash guard over the entire length. Lead screw and feed screw protection by means of a light curtain (integrated into the emergency stop circuit). Emergency stop button. - Chip tray on wheels - Electric coolant system - Fixed steady rest - Follower steady rest - Operating tools, acceptance test report according to DIN, operating and maintenance manual, complete electrical installation, machine manufactured according to the latest CE standard