Used Screw Capper for sale (5,266)

Condition: good (used), 4150 operating hours Kwsdewy Hx Hopfx Ahvew

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 80011, turning diameter over bed slide: 260 mm, center height: 130 mm, turning length: 500 mm, spindle speed (max.): 3,135 rpm, overall weight: 500 kg, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates the buyer to collect the item within the specified periods: either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026. Kjdpeym Udpofx Ahveww TECHNICAL DETAILS Turning length: 500 mm Swing over bed: 260 mm Swing over cross slide: 200 mm Centre height over bed: 130 mm Centre height over cross slide: 100 mm Spindle bore: 22 mm Spindle speed: 13 to 3,135 rpm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,500 x 700 x 1,500 mm Weight: 500 kg EQUIPMENT Tailstock Quick change tool post Collet chuck 8 additional tool holders External reference: Pieper - Lot 61

Condition: used, Year of construction: 2010, Lot consists of: (1) Compressor Kwsdsym Tx Sspfx Ahvow Technical Details: Motor: 5,500V 108A 900kW, weight 4.6 t /// Compressor: 7,500 m³/h, 6 bar. LxWxH 4.5x3.3x2.2 m, weight 12.5 t

Year of construction: 2011, condition: not inspected (used), functionality: unexamined, overall weight: 500 kg, total length: 2,000 mm, total width: 1,000 mm, total height: 2,400 mm, pressure: 12.75 bar, machine/vehicle number: CAI709141, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates you to timely collection either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Compressed air max.: 12.75 bar MACHINE DETAILS Operating voltage: 230 V Frequency: 50 Hz Compressor voltage: 400 V Compressor frequency: 50 Hz Connected load: 3 kW Dimensions & Weight Kwjdpfxoym Rqfo Ahvew Dimensions (L x W x H): 2,000 x 1,000 x 2,400 mm Weight: 500 kg External reference: Pieper – Lot 55

Condition: refurbished (used), Year of construction: 2016, operating hours: 2,012 h, functionality: fully functional, machine/vehicle number: 1.8174.0, overall weight: 600 kg, total length: 1,460 mm, total width: 800 mm, total height: 1,530 mm, power: 18.5 kW (25.15 HP), fuel type: electric, volume flow: 210 m³/h, operating pressure: 8 bar, ambient temperature (min.): 3 °C, ambient temperature (max.): 45 °C, noise level: 67 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, The compressor is in like-new condition and fully functional. With 2012 operating hours and recently serviced, the compressor is ready for use. Kaeser filter combination FG-48, FFG-48B, and FF-48B included. See attached photos. Further details available via email or phone. Kodpfsw S Im Isx Ahvsww

Condition: not inspected (used), functionality: unexamined, turning diameter: 340 mm, center height: 170 mm, spindle speed (max.): 2,000 rpm, overall weight: 1,200 kg, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item within the specified periods: either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026. TECHNICAL DETAILS Swing diameter over bed: 340 mm Swing diameter over cross slide: approx. 260 mm Center height over cross slide: 130 mm Center height over bed: 170 mm Center distance: 700 mm Spindle speed: 25 – 2,000 rpm Spindle bore: 48 mm MACHINE DETAILS Operating voltage: 380 V Frequency: 50 Hz Rated current: 12 A Connected load: 4.8 kW Dimensions & Weight Dimensions (L x W x H): 1,800 x 700 x 1,500 mm Weight: 1,200 kg EQUIPMENT Tailstock Kwjdpfx Asym N Nyehvew Multifix quick-change toolholder Quick-action chuck Including collets Various accessories External reference: Weitner

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 012015030, center height: 200 mm, spindle speed (max.): 2,000 rpm, overall weight: 1,000 kg, three-jaw chuck diameter: 210 mm, No reserve price - guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item within the specified period, either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026! TECHNICAL DETAILS Swing diameter over bed: 400 mm Swing diameter over cross slide: 240 mm Centre height over cross slide: 120 mm Kwedpfx Ahsym N Enevjw Centre height over bed: 200 mm Centre distance: 700 mm Spindle speed: 25 – 2,000 rpm Spindle bore: 48 mm Three-jaw chuck diameter: 210 mm MACHINE DETAILS Operating voltage: 380 V Control voltage: 220 V Frequency: 50 Hz Connected load: 5 kW Dimensions & Weight Dimensions (L x W x H): 1,800 x 900 x 1,600 mm Weight: 1,000 kg EQUIPMENT Tailstock Multifix quick-change tool post Three-jaw chuck SMW External reference: Weitner

Condition: not inspected (used), functionality: unexamined, turning diameter: 280 mm, center height: 145 mm, center width: 750 mm, spindle speed (max.): 3,500 rpm, overall weight: 800 kg, No reserve price – guaranteed sale to the highest bidder! Kwjdpfxoym N D Rj Ahvew Placing a bid obligates the buyer to collect the item within the specified periods: either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026! TECHNICAL DETAILS Swing diameter over bed: 280 mm Swing diameter over cross slide: 178 mm Centre height: 145 mm Centre distance: 750 mm Spindle speed: 70 – 3,500 rpm Spindle bore: 35 mm Spindle nose: D 1-3 Tailstock taper: 3 MT Leadscrew diameter: 25 mm Thread: 6 mm pitch MACHINE DETAILS Operating voltage: 380 V Frequency: 50 Hz Rated current: 11 A Dimensions & Weight Dimensions (L x W x H): 1,700 x 800 x 1,800 mm Weight: 800 kg External reference: Neuburger

Condition: not inspected (used), functionality: unexamined, turning diameter: 360 mm, center height: 180 mm, overall weight: 1,000 kg, No minimum price – guaranteed sale to the highest bidder! Placing a bid obligates the buyer to collect the item within one of the following periods: either between 11.05.2026 and 13.05.2026 or between 18.05.2026 and 21.05.2026. TECHNICAL DETAILS Swing diameter over bed: approx. 360 mm Swing diameter over cross slide: 240 mm Center height over cross slide: 120 mm Center height over bed: approx. 180 mm Spindle bore: approx. 48 mm Center distance: approx. 700 mm MACHINE DETAILS Operating voltage: 380 V Frequency: 50 Hz Control voltage: 220 V Connected load: 4.8 kW Dimensions & Weight Dimensions (L x W x H): 1,800 x 900 x 1,600 mm Weight: 1,000 kg EQUIPMENT Kwedpfxoym N D Dj Ahvew Tailstock Multifix quick-change tool post Quick-change chuck Various steadies Digital readout External reference: Lot 18 / Ulmer

Condition: not inspected (used), functionality: unexamined, turning diameter: 300 mm, center height: 150 mm, overall weight: 800 kg, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates the buyer to collect the item within the specified time frame: either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026. TECHNICAL DETAILS Swing diameter over bed: 300 mm Swing diameter over cross slide: 200 mm Centre height over bed: 150 mm Centre height over cross slide: 100 mm Centre distance: 500 mm Spindle bore: approx. 28 mm Kwedpfxoym N A Ho Ahvew MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,400 x 700 x 1,600 mm Weight: 800 kg EQUIPMENT Multifix turning tool holder Four-jaw chuck (Ø 130 mm) Digital readout by HEIDENHAIN External reference: Mahle

Condition: ready for operation (used), functionality: fully functional, turning diameter: 300 mm, center height: 150 mm, spindle speed (max.): 2,800 rpm, overall weight: 1,030 kg, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates the buyer to collect the item within the specified period: either between 11/05/2026 and 13/05/2026, or between 18/05/2026 and 21/05/2026. TECHNICAL DETAILS Swing diameter over bed: approx. 300 mm Kwedpeym N Aasfx Ahvjw Swing diameter over cross slide: 200 mm Centre height over cross slide: 100 mm Centre height over bed: 150 mm Centre distance: 750 mm Spindle bore: approx. 35 mm Spindle speed: 40 – 2,800 rpm MACHINE DETAILS Operating voltage: 380 V Connected load: 3 kW Rated current: 25 A Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 1,860 x 700 x 1,800 mm Weight: 1,030 kg EQUIPMENT Tailstock Multifix Type B toolholder 3-jaw chuck (diameter: 160 mm) 2-axis digital readout by RSF External reference: Mahle

Condition: ready for operation (used), functionality: fully functional, turning diameter: 340 mm, center height: 170 mm, spindle speed (max.): 2,800 rpm, overall weight: 800 kg, No reserve price – guaranteed sale to the highest bidder! Placing a bid obligates you to collect the item within the specified period either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026. TECHNICAL DETAILS Swing diameter over bed: 340 mm Center height over support: 100 mm Swing diameter over support: approx. 200 mm Distance between centers: 750 mm Center height over bed: 170 mm Spindle speed: 12 – 2,800 rpm Spindle bore: approx. 38 mm MACHINE DETAILS Operating voltage: 380 V Control voltage: 220 V Connected load: 3 kW Rated current: 6.25 A Frequency: 50 Hz Dimensions & Weight Dimensions (L x W x H): 1,700 x 650 x 1,500 mm Weight: 800 kg EQUIPMENT Kjdpfsym Nz Njx Ahvsww Tailstock Multifix tool holder RÖHM three-jaw chuck (Ø 160 mm) External Reference: Mahle

Condition: excellent (used), Year of construction: 2016, operating hours: 54,737 h, functionality: fully functional, Screw compressor Atlas Copco GA250 250 kW Ksdpfxsym Npts Ahvsww 8.5 bar 41.70 m³/min

Condition: ready for operation (used), functionality: fully functional, center height: 160 mm, center width: 750 mm, spindle bore: 40 mm, spindle speed (max.): 3,000 rpm, workpiece diameter (max.): 375 mm, machine/vehicle number: 160378, No reserve price – guaranteed sale to the highest bidder! By placing a bid, you are obligated to collect the item within the specified timeframes: either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026. TECHNICAL DETAILS Centre height: 160 mm Centre distance: 750 mm Maximum workpiece diameter over bed: 375 mm Ksdoym Nkkopfx Ahvoww Maximum workpiece diameter over cross slide: 180 mm Spindle speeds: 38 to 3,000 rpm Spindle taper: Morse 5 Spindle bore: 40 mm Collet capacity: 24 mm Fine feeds longitudinal and cross: 0.015 to 0.21 mm/rev Longitudinal and cross feeds: 0.025 to 0.35 mm/rev Cross slide travel on bed: 750 mm Compound slide travel: 120 mm Cross slide travel: 215 mm Centre height above tool slide: 32 mm Tool section: 20 x 20 mm Tailstock quill taper: Morse 3 Quill travel: 120 mm Lateral adjustment: +/- 10 mm MACHINE DETAILS Operating voltage: 380 V Dimensions & Weight Dimensions (L x W x H): 2,500 x 1,000 x 1,500 mm Weight: 2,500 kg EQUIPMENT Including documentation Matching tool cabinet with accessories included External reference: Showroom

Condition: used, Year of construction: 2006, Kahl Twin Screw Extruder is a machine manufactured by Kahl in 2006. Currently stored in Germany, it comes equipped with a fine grain hopper, fine grain discharge, fine grain sack, a belt unit (Type: BTK 1510-0), water addition, extruder, supply air blower, reconditioned in 2016. It also includes dust removal, tumbler sieve, dedusting, final packaging, belt dryer, product hopper, pipe chain conveyor, cyclone, rotary valve, distributor, dust sack, exhaust air blower, air stream rotation dryer, feed table, mixer, and an additional air supply blower and belt dryer. The delivery terms are FCA. Equipment: 1 x feed table, 1 x tube chain conveyor, 1 x mixer 1 x water addition, 1 x extruder, 1 x supply air fan, 1 x cyclone, 1 x rotary valve, 1 x distributor, 1 x belt dryer, 1 x product hopper, 1 x tube chain conveyor, 1 x fine grain hopper, 1 x fine grain discharge, 1 x fine grain bag, 1 x supply air fan, 1 x belt dryer, 1 x rotary valve, 1 x dust bag, 1 x exhaust fan, 1 x airflow rotary dryer, Kwjdpfovfxqysx Ahvow 1 x dedusting, 1 x tumbling screen, 1 x bar removal, 1 x final packaging 1 x belt unit, type: BTK 1510-0 refurbished 2016

Condition: not inspected (used), functionality: unexamined, turning length: 3,000 mm, spindle speed (max.): 1,800 rpm, overall weight: 8,000 kg, three-jaw chuck diameter: 310 mm, No reserve price – guaranteed sale to the highest bidder! Bidding obligates the buyer to collect the machine within one of the specified periods: either between 11/05/2026 and 13/05/2026 or between 18/05/2026 and 21/05/2026. TECHNICAL DETAILS Turning length: 3,000 mm Center height over bed: 300 mm Swing diameter over bed: 600 mm Center height over carriage: 200 mm Swing diameter over carriage: 400 mm Spindle speed: 9 to 1,800 rpm Spindle bore: 110 mm Three-jaw chuck diameter: 310 mm Kwjdjym Dcuepfx Ahvow Steady rest diameter: 200 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 6,000 x 1,400 x 2,000 mm Weight: 8,000 kg EQUIPMENT Tailstock Multifix turning tool holder Three-jaw chuck Two-axis digital readout (SONY) Steady rest External Reference: Pieper – Lot 57

Condition: excellent (used), Year of construction: 2011, SCREW COMPRESSOR ATLAS COPCO GA110VSD 120Kw 2011 Ksdpotqdlpofx Ahveww Screw compressor ATLAS COPCO GA110VSD machine with inverter and heat exchanger Technical data: capacity: 18.72m3/min; 120 KW engine; max pressure 10 bar; mileage; 17483h year; 2011 Fully functional compressor, ready to work, warranty we provide service.

Year of construction: 2018, condition: refurbished (used), functionality: fully functional, Extrudex Extruder complete line with UWG (underwater pelletizer) Technical data: Output: 300–500 kg/h, depending on feed material Year of construction: 1995, but completely overhauled in 2018 and in as-new condition since then Kwjdpfx Ahjyrn Rtjvjw Included in the line: Extruder Complete control system Sieve changer "Kreyenborg" K-SWE 150 Ekochem RW-400 underwater pelletizer + WP-220 centrifuge Vibrating screen (classifier) Storage hopper (10 cbm) Chiller for water (cooling capacity: 80 kW) Various smaller peripheral devices Sale is also possible without the underwater pelletizer, alternatively with strand die, water bath, and strand pelletizer.

Condition: reconditioned (used), Year of construction: 2008, operating hours: 62,000 h, functionality: fully functional, machine/vehicle number: CSD 102 100260.2, overall weight: 1,280 kg, total length: 1,650 mm, total width: 1,041 mm, total height: 1,865 mm, power: 55 kW (74.78 HP), volume flow: 492 m³/h, operating pressure: 10 bar, pressure (max.): 11 bar, ambient temperature (min.): 3 °C, ambient temperature (max.): 40 °C, noise level: 69 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, Kaeser CSD 102 compressor, Kwjdpfx Ahsx Dihcsvjw - complete overhaul of the screw block - complete overhaul of the electric motor - new oil cooler - regular servicing - compressor accessories maintained according to the manual - external condensation dryer VRT 500 - water-oil separator with new filling - filter set with new inserts

Condition: new, Year of construction: 2025, AHB-20A screw compressor special for laser machine double use 8 till 16 bar G3/4 connection 380 volt 3 phase 50Hz air delivery 1,2 m3/min Tank 500 l High Efficiency Refrigerated Air-dryer include High Efficiency Precision Filters include Air supply without oil and water two stge screw type INCLUDE IN THE PRICE: 1 airfilter ( have to change after 3000 hours ) 1 oil filters ( 1 change after 500 hour second after 3000 hours ) 1 separator ( change after 3000 hours ) Advantanges High Pressure Screw Air Compressor SPECIAL FOR LASER MACHINES Integrated Design Air compressor, air dryer, air tank and line filters integration. Avoid the trouble to connect the pipes, can use it after power on. Air Supply Without Oil and Water The compressed air contains oily water mist and oil, and high-pressure spraying on the protective mirror will seriously affect the transmission of the laser beam, disperse the focus, cause the product to be cut through, and produce waste. Intelligent Monitoring ( option ) Smart housekeeper remote monitoring, 24-hour online monitoring, no need for special management to open the phone to quickly obtain machine operation information, When the machine encounters a malfunction or needs maintenance, the system will automatically send an early warning message. High Quality Spare Parts High-End Air End The double screws adopts the latest line design, high-precision processing, reduces the leakage of compressed air, reduces power consumption, and saves money for customers. Imported Electronic Accessories Imported electronic components, high protection and safety level, to ensure the stable operation of the equipment, and the electrical part is enlarged by 30-50%. High Efficiency Precision Filter Using high-precision and high-pressure-resistant filters, multiple filtrations to ensure that the gas supply is oil-free and water-tree, ensuring production. Large Capacity Air Tank Kwodpfxjm E Im Ts Ahvsw Large capacity, more energy-saving and electricity-saving, thicker material, buffering, cooling, water removal, and stable air pressure. FOR MORE INFORMATION PLS TAKE CONTACT WITH US. J.C. Helthuis Coevorden Netherlands

Condition: used, Manual spindle press Kwodpjymr Tzofx Ahvow - Maximum filling height: approx. 90 cm - Pressing area: 102 x 72 cm

Condition: used, Year of construction: 2017, feed pressure / bar liter capacity / l Air consumption / m³/h Kwsdpfx Ahoxy S H Tevew

Condition: ready for operation (used), Numeriek gestuurd Japanse elektronica werkt betrouwbaar, 720 mm snijbreedte, zeer stabiel en zwaar gebouwd (1400 kg), kogelomloop spindel voor spelingsvrij instellen van het zadel. Manual en extra mes ingegrepen. Prijs “as is” geladen op uw transport, excl. eventuele gecertificeerde verpakkingskosten. Kedpfxsw R En Ho Ahvoww

Condition: excellent (used), 1 lot of micrometer screws (28690) used and untested, from warehouse clearance Kjdsymmi Dspfx Ahveww

Operating hours: 54,000 h, condition: ready for operation (used), functionality: fully functional, CINCINNATI PROTON 60-30G Screw diameter: 60 mm, L/D = 30 Grooved feed section Motor (DC drive): 163 kW Screw speed: max. 221 rpm Tooling zones: 5 pcs. + 1 pc. for adapter Melt pressure & temperature sensor included Control: Cincinnati EXc Pro-NT Cylinder in bimetal version – condition: good Screw fully armoured and hardened feed zone – condition: good Dimensions (L x W x H): 2,580 x 1,430 x 1,800 mm Ksdpfxjyrihgj Ahvoww Weight: 2,500 kg