Used Scm Method for sale (654)

Condition: used, Year of construction: 2015, SANDYA 900 - WIDE-BELT CALIBRATING AND FINE-GRINDING MACHINE S900 RRT 135 KEY FEATURES 2,620 MM LONG GRINDING BELTS FOR OPTIMAL SURFACE QUALITY AND PRODUCTIVITY PHOTO CELLS WITH SYSTEM WITH BACKGROUND SUPPRESSION: THE CORRECT CENTERING OF THE GRINDING BELT IS ALWAYS GUARANTEED FLOATING PRESSURE ROLLERS: ACCURATE AND CORRECT SUPPORT OF THE WORKPIECES UNDER ALL WORKING CONDITIONS TECHNICAL DATA Working width mm 1,350 Min./max. working height mm 4-170 Grinding belt width mm 1,370 Grinding belt length mm 2,620 Motor power 1st unit kW (HP) 11 (15) Motor power 2nd/3rd unit kW (HP) 11 (15) Gear motor kW (HP) 0.6/1.3 (1.8/1.7) Feed speed m/min 4.5/9 GENERAL FEATURES: Machine frame and work table* Steel structure with electrical control cabinet on the front of the machine * Insertion of the grinding belts from the left side of the machine * motorized table height adjustment * Main motors integrated into the machine frame Electrical equipment* Electromechanical control panel on the left front side of the machine * automatic star-delta starter for the main motor * motor protection switches for the motors * motors in insulation class IP 54 Safety and protective devices* automatic brake for immediate stopping of the units * emergency stop switch at the workpiece infeed * emergency stop switch at the workpiece infeed and outfeed * lockable main switch * automatic emergency shutdown of the machine in case of: - grinding belt breakage - grinding belt not tensioned - protection against lateral deflection of the grinding belt - lack of compressed air - overload of the main motors Note: the standard version with 400 volts 50 Hz requires a three-phase power supply + neutral conductor + earth conductor. If the 400-volt power supply is without a neutral conductor, a single-phase transformer must be ordered in addition from the price list. The same transformer must also be ordered for a machine with a voltage higher than 400 volts, regardless of whether a neutral conductor is available or not. Machine version with 220 or 230 volts (50 or 60 Hz) is available at an additional cost (see price list). BASIC MACHINE STANDARD EQUIPMENT - R175/85 rubber-coated calibrating roller, diameter 175 mm, 85 Shore - 1st position - R220/65 rubber-coated calibrating and grinding roller, diameter 220 mm, 65 Shore - 2nd position - Hard grinding shoe with manual adjustment of the working height - Replaceable graphite cloth - Motor power 1st unit 11 kW (15 HP) - Motor power 2nd and 3rd unit 11 kW (15 HP) - Electronic ammeter for the main motor to display the current consumption - Electronic display of the working height - Electronically controlled grinding belt oscillation - Rubber pressure rollers - Recoil protection at the infeed before the first unit - Rubber feed belt 60 SH - Roller table with two rollers at the infeed and outfeed of the work table - Belt feed with two speeds 4.5 / 9 m/min with gear motor - Automatic belt centering European safety regulations (CE marking) 1 piece SANDYA 900 RRT 135 - Calibrating and fine-grinding machine 1 piece First and second "R" unit with roller and third "T" unit with grinding shoe Voltage 400 EU 1 piece Frequency 50 Hz 1 piece "C plus" version for RRT 1 piece with: - pneumatic switching on and off of the roller – 1st unit "R" - pneumatic switching on and off of the roller – 2nd unit "R" - "MESAR 46" electronic oscillating grinding shoe - electronic adjustment of the working height - Selection of belt running direction 2nd grinding belt 1 Cjdpfo Aflwysx Aiishd

Condition: excellent (used), Year of construction: 2006, SCM Z30 CNC Machining Center – Year of Manufacture 2006 – Fully Equipped – On Behalf of Customer For sale is an SCM Z30 CNC machining center from the year 2006. The machine is offered on behalf of a customer and was in operation in a carpentry workshop until recently. The SCM Z30 is a proven and robust CNC machine for furniture production and interior fittings, making it ideal for cost-effective manufacturing in everyday use. Technical Data: Manufacturer: SCM Model: Z30 Year of manufacture: 2006 Travel X-axis: approx. 3000 mm Travel Y-axis: approx. 1300 mm Travel Z-axis: approx. 150 mm Working area: approx. 3000 x 1300 mm Unit / Spindle: Main spindle: approx. 7.5 kW Speed: up to 18,000 rpm Equipment: Console table with vacuum system (pod and rail system) Automatic tool changer – fully equipped Integrated drilling unit CNC control (SCM) Rugged industrial build Applications: Furniture manufacturing Interior fitting Codpfx Asyl Numjiishd Panel processing Single-item and series production Condition: Machine was in use until recently Fully functional Special features: Sale on behalf of customer Photos and videos available Inspection possible by arrangement Location: Germany If you are interested, please get in touch – we will be happy to send you further information, photos, and videos. Location: Ostfriesland region

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: AB00016224, overall weight: 1,672 kg, type of input current: three-phase, workpiece height (max.): 170 mm, input frequency: 50 Hz, input current: 40 A, input voltage: 400 V, workpiece width (max.): 1,100 mm, Equipment: double-sided, Machine in excellent condition. Vacuum table included. For sale due to new acquisition. Chjdez Rzyvopfx Aiiod

Condition: used, Technical specifications: Feed rollers on the table: 4 Pressure rollers: 6 Cedj Ah Ey Ajpfx Aiiehd Working width: 300 mm Working width of the roller: 300 mm Max. disc diameter: 350 mm Max. cutting height: 100 mm Anti-kickback devices: 2 rows Central lubrication for the track Feed speed adjustment: Smooth Main motor: 22 kW Guide rail: YES Overall dimensions: Length: 2700 mm Width: 1500 mm Height: 1700 mm

Condition: good (used), Code: 0322 Brand: SCM Model: L'INVINCIBILE SI 3 - CE Standard Electronic panel saw with controlled axis, tilting blade and scoring unit, for furniture, panels, custom-made furnishings, doors, wooden window frames, kitchens, bathroom furniture, plastics, composite materials and various - CE Standard - Year 2017 Technical data: Carriage made entirely of aluminium with contact sliding system on hardened and ground steel guides Electronic control EASY TOUCH 12: 12-inch flat colour screen - Direct management of the following working axis using manual, manual incremental, semi-automatic and automatic methods: main blade lifting, blade unit tilting, parallel guide movement, scoring blade lifting and translation. Operator assistance with graphics support. Tool database Operator assistance function on electronic control Adjustable wall-mounted control panel Scoring unit with independent motorisation Squaring carriage length 3800 mm Main blade diameter 400 mm Scoring blade diameter 120 mm Blade tilt 0-45 degrees Chodpfx Asytufgoiied Max cutting height at 90 degrees 140 mm Max cutting height at 45 degrees 97 mm Blade rotation speed rpm 3000/4000/5000 Scoring rotation speed rpm 8500 Main blade motor power Hp 9,5 Scoring blade motor power Hp 1,7 Cutting width at parallel guide 1500 mm Parallel guide programmed with THK sliding Electronic adjustment of the scoring unit Squaring frame with ‘COMPEX’ device for angled cuts with automatic compensation of the stop position. Start/stop buttons integrated into the carriage Eccentric workpiece clamping arm Extension to the work surface Squaring guide with 3 LCD readers for stop positions Full support and Wireless: adjustable frame for angled cuts complete with wireless function Suction mouth diameter: at the base 120 mm - at the suspended guard 100 mm Overall dimensions of assembled machine mm 4200 x 4300 x 1800 h Overall dimensions for transport mm 4200 x 2350 x 1800 h + Pallet mm 1600 x 1000 x 800 h Weight kg 1140

Condition: good (used), Year of construction: 2011, machine/vehicle number: AH005553, functionality: fully functional, total length: 8,100 mm, overall weight: 4,000 kg, Main specifications: * Panel thickness: max. 60 mm * Edge thickness: 0.4 - 3 mm (Solid wood up to 12 mm) * Feed speed: up to 25 m/min * Glue system: EVA / PUR Configuration: * Pre-milling unit * Gluing unit with pressure rollers * End-trimming unit * Top/Bottom trimming unit (rough & fine) * Corner rounding unit * Radius edge scraper * Glue scraper * Buffing unit Cedpfx Aszvb Uxsiiohd Machine Condition: * Excellent working condition. * Regularly maintained. * Available for inspection and testing while powered on.

Condition: used, Year of construction: 2003, functionality: fully functional, input voltage: 400 V, cutting height (max.): 105 mm, cutting width (max.): 3,200 mm, total length: 4,500 mm, total width: 1,600 mm, total height: 1,800 mm, overall weight: 5,200 kg, Equipment: CE marking, saw blade guard, scorer, SCM Sigma Impact 105 C Beam Saw – 3200 × 3200 mm – 2003 Price: €19,500 + VAT – Ex Works, Ireland SCM Sigma Impact 105 C industrial beam saw / panel sizing saw. Year: 2003 Cutting capacity: 3200 × 3200 mm Blade projection: 105 mm Manufacturer: SCM Model: Sigma Impact 105 C Location: Ireland Condition: Used Availability: Immediately available The machine has been dismantled and is ready for loading and shipping. The SCM Sigma Impact 105 C is a heavy-duty industrial panel sizing saw designed for accurate, high-volume processing of sheet materials including MDF, MFC, chipboard and similar wood-based panels. Machine Specification 3200 mm cutting length 3200 mm rear loading/pusher capacity 105 mm blade projection Automatic programmable pusher Pneumatic workpiece grippers Main saw and scoring saw Pressure beam clamping Automatic cutting cycle Industrial SCM construction Condition & Sale The machine is used and is offered as seen, ex works Ireland. The machine is currently dismantled and prepared for transport. Inspection of the machine and components can be arranged by appointment. The buyer is responsible for collection, transport, installation and commissioning unless otherwise agreed prior to purchase. Assistance with loading and international transport can be arranged at additional cost. Payment in full prior to collection. Export The machine is immediately available for collection from Ireland. We can assist international buyers with: Loading arrangements European and UK transport quotations Installation and commissioning quotations if required Price: €19,500 + VAT, Ex Works Ireland Cedpfxez Iykmj Aiijhd Contact for further information, photographs, videos or transport enquiries. Search Keywords SCM Sigma 105, SCM Sigma Impact 105 C, SCM beam saw, used beam saw, used beamsaw, panel sizing saw, automatic panel saw, CNC panel saw, SCM panel saw, 3200 beam saw, 3200 x 3200 panel saw, Holzma alternative, Selco alternative, Gabbiani alternative, used woodworking machinery.

Condition: excellent (used), SCM 320cm Linvincibile Si3 panel saw 320cm carriage, 0-45 degree tilting saw head, motorized tilting and up/down adjustment of the saw blade, right-hand fence with motorized adjustment up to 1500mm, 1.3KW scoring saw, 2-axis, electrically adjustable, 9KW motor, 3 speeds, Cedpfxj Ahm R Ts Aiiehd max. saw blade diameter 450mm, Fence with electronic displays. Used machine, very good condition.

Condition: excellent (used), Year of construction: 2005, machine/vehicle number: AH/109736, functionality: fully functional, input voltage: 400 V, edge thickness (max.): 2 mm, height adjustment type: mechanical, overall weight: 250 kg, Equipment: CE marking, machine in excellent condition, used very little practical and versatile edge gluing machine for carpenters for straight edges for angled edges Chodpfx Aiszvmygsied particularly suitable for edge banding of shaped parts READY FOR OPERATION

Condition: used, Year of construction: 2017, ++ without ST package ++ can be purchased separately CNC-CONTROLLED MACHINING CENTER KEY FEATURES "PRO-SPACE" SAFETY DEVICES: SAFE AND COMPACT "HE" TABLE - FOCUS: EFFICIENCY AND SAVINGS TECHNICAL DATA AXES Pratix S22 Working area in X-Y-Z axis * mm 22-43 = 4286-2155-150 Travel X-Y-Z axes mm 22-43 = 4970-2585-250 Travel speed of X-Y axes m/min 35 WORK TABLE Type Multifunction table made of aluminum Stops for "A" working area pcs 4 Vacuum pump (Opt.) m³/h 90/108 - 250/300 DRILLING UNIT Vertical spindles No. – rpm 7 (5X-3Y) 6,000 – 12 (8X-5Y) 6000 Horizontal spindles (Opt.) No. – rpm 4 (2X-2Y) 6,000 – 6 (4X-2Y) 6000 Chodpfxez Ebzho Aiijd Integrated saw blade in X (Opt.) Ø mm – rpm 120 – 7500 Motor power kW (HP) 2.2 (3) ELECTROSPINDLE Motor power Std. (S6) kW (HP) 6.6 (9) – 9.5 (13) Max. speed rpm 24000 Side tool changer 13 positions INSTALLATION Installed power kVA 23÷28,5 Compressed air requirement l/min 400 Extraction air requirement m³/h 5300 Extraction air speed m/sec 30 Extraction nozzle diameter (electrospindle + drilling unit + kit) mm 250 Machine weight kg 22-43 = 3200 * X Distance between stops - Y Max. panel width - Z Workpiece passage Only electrospindle or electrospindle + drilling unit: diameter 200 mm; extraction air requirement 3400 m³/h In conjunction with the slider for panel output, the extraction nozzle diameter is always = 250 mm GENERAL FEATURES CNC-controlled machining center for processing panel materials. Self-supporting structure and work table Box structure made of cold-rolled steel, consisting of rectangular sections that are welded together; multifunction work table made of aluminum with a single working area. Holes in a 120 mm grid for vacuum connection, can be easily removed using a magnetic device (patented system). The entire surface is grooved at a distance of 20 mm so that the workpieces can be clamped using rubber seals, MODULSET or suction cups. Automatically retractable reference stops that ensure accurate positioning of the workpieces to be processed. Moving gantry This is a gantry structure made of cold-rolled steel in a box design, consisting of right-angled sections. The working units are installed on the gantry. Working unit consisting of a drilling head with vertical spindles, horizontal spindles, an integrated grooving and sawing unit and an SCM electrospindle with a tool quick-change system type HSK63F. Travel paths of the gantry and the unit carrier The movement in the X, Y and Z axis takes place on linear prismatic recirculating ball guides with the help of pre-tensioned Movement transmission of the X and Y axes (moving column and carriage) takes place via a reduction gearbox with rack and pinion drive and oblique The movement of the unit carrier in the Z direction takes place via pre-tensioned Positioning of the working units and control of the machine functions takes place via "Brushless" three-phase servomotors and digital CONTROL The control unit consists of a numerical control for milling and drilling machines and a user interface with remote control with a 7" touchscreen color screen. The Xilog Maestro machine operating interface offers optimal communication between operator and the machine for all programming functions.

Condition: excellent (used), Year of construction: 2010, -max.width-240mm Cjdpfx Ajz Rnlfeiiehd -work heads 4+1

Condition: excellent (used), Year of construction: 2021, Sale on behalf of customer. SCM Gabbiani P80 Panel Saw – Year 2021 – 4300 x 4300 mm For sale is a state-of-the-art SCM Gabbiani P80 panel saw, manufactured in 2021 and in excellent condition. The machine was used in an active carpentry workshop and impresses with its precision, speed, and high reliability in daily operations. Technical Specifications: Cutting length: 4300 mm Cutting width: 4300 mm (large version) Cutting height / blade protrusion: 80 mm Main saw blade diameter: Ø 340 – 370 mm Scoring saw blade diameter: Ø 200 mm Main saw blade speed: approx. 4,650 rpm Scoring blade speed: approx. 5,850 rpm Drive & Power: Main motor: approx. 7.5 – 15 kW (depending on configuration) Scoring unit: approx. 1.3 – 1.5 kW Total connected load: approx. 12 – 15 kW Voltage: 400 V / 50 Hz Speeds: Saw carriage: 6 – 60 m/min (stepless) Pusher speed: up to 60 m/min Pneumatics & Extraction: Compressed air requirement: approx. 300 NL/min / 7 bar Extraction capacity: approx. 2,200 – 2,400 m³/h Extraction ports: 4 x 120 mm Features & Equipment: Air flotation tables for easy handling of large panels Floating clamps for precise cutting Scoring unit for chip-free cuts PC/PLC control (Maestro system possible) Robust industrial design for high workload High repeatability and cutting quality Material suitability: Suitable for: Chipboard Chjdpfx Aioylp S Eoijd MDF / HDF Multiplex / plywood Coated panel materials The machine is fully operational and ready for use. Viewing possible anytime by appointment. Location: Germany If you are interested, please get in touch – further photos, videos, or detailed information are available upon request. Dismantling and delivery can be arranged at additional cost.

Condition: excellent (used), Year of construction: 2017, I sell the panel beam saw SCM SIGMA PRIMA 67 P. Year 2017. Cutting size 3300x2200mm + back loading table. Cutting height 67mm. Main motor 9,0 kW Csdpfez Suv Hox Aiiohd Scoring motor 1,3 kW Max saw blade diameters 330 + 160mm Total area covered W.5400mm x D.9900mm 9 pcs. gripper with pneumatic regulation Side alignment with pneumatic stroke. Wincut optimising software included. Very good condition. Available immediately.

Condition: used, Technical specifications: Max. saw blade diameter: 400 mm Min. saw blade diameter: 300 mm Saw blade arbor diameter: 30 mm Scoring saw diameter: 120 mm Scoring saw with separate motor Manual saw blade height adjustment Tilting saw blade, adjustable from 0° to 45° Manual saw blade tilt angle adjustment Carriage lock Extension tables for angled cutting Chjdpfj Ahyufjx Aiisd Dust extraction port diameter: 120 mm Electrically adjustable fence Safety switch Power supply: 400 V Motor power: 5 kW Overall dimensions: Length: 2900 mm Width: 3800 mm Height: 1450 mm

Condition: used, Year of construction: 2018, saw blade diameter: 550 mm, Panel saw Manufacturer: SCM GROUP spa Brand: SCM Type: SI 5 Year of manufacture: 2018 Main saw blade diameter: 550 mm Saw blade swivel angle: 46 degrees Chsdpfxoz Iqg Es Aiijd Max. saw blade cutting height at 90 degrees: 200 mm Max. saw blade cutting height at 45 degrees: 130 mm Cutting width with parallel fence: 1,500 mm Purchase price (net): €16,000 plus applicable VAT. VAT will be shown separately on our invoice. Note: The equipment text or equipment description is taken from the original purchase invoice and has not been checked for accuracy or completeness. Deviations are possible! Financing possible If desired, we can arrange suitable financing through our company. Please contact us. Subject to change, errors and prior sale. Sale is made without warranty and guarantee, and only to commercial businesses. Inquiries will be processed from Monday to Friday between 8 a.m. and 4 p.m.

Condition: used, Year of construction: 1987, Max. working width: 630 mm Number of knives: 4 pcs Knife shaft: Tersa knife shaft Motor brake: Yes Chodpfxo Ahrnas Aiiod Max. planing height: 240 mm Min. planing height: 3 mm Max. material removal: 8 mm Thickness table adjustment: electric/manual & fine adjustment Thickness gauge display: mechanical digital display Feed speed, fixed: 6/18 m/min Thickness table spindles: 1 large Infeed rollers: Steel, toothed Outfeed rollers: Steel Weight approx.: 900 kg Motor power: 5.5 kW Dust extraction diameter: 150 mm Location: Customer

Condition: used, Year of construction: 2022, PANEL SAW WITH TILTING SAW BLADE Linvincibile SI 5 KEY FEATURES SLIDING TABLE: GUARANTEED SUPERIOR CUTTING QUALITY OVER THE LONG TERM TELESCOPIC ARM: AN “UNBEATABLE” SMOOTH MOVEMENT SAW UNIT: FOR A PERFECT CUT Technical Data SI 5 Main saw blade diameter (mm): 550 Cutting capacity with extendable fence - with table 3200 mm - with table 3800 mm 3200x3200 3800x3200 Saw blade tilt (degrees): 46 Max. cutting height at 90° (mm): 200 Max. cutting height at 45° (mm): 130 Saw blade speed (rpm): 2500-3500-5000 Scoring blade speed (rpm): 8500 - Extractor port diameter: - on frame - on blade guard 120 100 Main motor power [S6 -40%] Hz50 kW: 7 Scoring motor power [S6 -40%] Hz50 kW: 0.9 Cutting width at rip fence (mm): 1600 Standard equipment and accessories - Optimizer/Process control app for tablets: SCM Thundercut. The app can be downloaded from the App Store or Play Store for tablets compatible with iPadOS or Android. It can be activated via the QR code supplied with the machine. The app enables: * Management of machine fleet and material/panel storage * Creation and editing of projects, importing projects from main furniture design software (file format "cpout"), importing cutting lists * Optimization of cutting lists by selecting one or more proposals from the optimization software integrated into the app * Correct machine settings for each cut, thanks to the simple and intuitive graphics of the 3D sequencer, guiding the operator step by step * Printing barcode labels to identify the various parts, via Bluetooth connection with compatible label printers. - 10-year warranty on the sliding table guide system - Sliding carriage entirely made of aluminum structure with guidance on crimped, hardened and arc-ground steel rails with large contact area - Max. saw blade diameter* up to 450mm with scoring blade mounted* up to 550mm without scoring blade - eye-S 15" electronic control including: * 15" touchscreen monitor * Direct control of the following working axes with manual, semi-automatic, automatic, and incremental modes: - Height adjustment of the main saw blade - Tilt adjustment of the saw unit - Rip fence adjustment - Height and lateral adjustment of the scorer (the scorer is automatically raised to the set position on activation and lowered on deactivation) * Operator assistance functions for complex cuts * Ability to store up to 1000 programs with associated image * Ability to store up to 1000 different tools with associated image * Cutting process management of preloaded parametric machining programs * Environment for creating and storing new sequenced working programs * Automatic import of working dimensions from Thundercut app * USB port * Ready for network connection - Auxiliary function of the electronic control, including: * Determination of correct fence position on rip fence for format processing with tilted saw blade * Determination of correct fence position on rip fence for angle cuts with mitre fence on the work table with or without tilted saw blade - Pivoting control panel above the table - Scoring unit with independent Cedpez Hb Nbjfx Aiishd

Condition: used, Technical specifications: Max. saw blade diameter: 300 mm Min. saw blade diameter: 250 mm Saw blade arbor diameter: 30 mm Scoring saw diameter: 100 mm Manual height adjustment of the saw blade Tilting saw blade, adjustable from 0° to 45° Csdpfj Ahyxmjx Aiijhd Manual adjustment of the saw blade tilt angle Table length: 1600 mm Table locking mechanism Dust extraction port diameter: 120 mm Guide Safety guard Safety switch Power supply: 400 V Main motor power: 4 kW Overall dimensions: Length: 1600 mm Width: 2900 mm Height: 1100 mm

Condition: used, Year of construction: 2019, overall weight: 1,047 kg, Combined Surfacing and Thicknessing Planer Manufacturer: SCM GROUP spa Model: SCM Type: L Invincible FS7 Year of Manufacture: 2019 Weight: 1,047 kg Usable Working Width: 520 mm Total Table Length: 2310 mm Cutterhead Diameter: 120 mm Planerhead Speed: 5000 rpm 4 Knives: 35 x 3 x 520 mm Aluminum Surfacing Fence: 1200 x 190 mm Surfacing Fence Angle Adjustment: from 90° to -45° Min./max. Planing Height: 3 / 250 mm Cedpfjz Iqqkox Aiiehd Feed Rate (Thicknessing): 5 - 8 - 12 - 18 m/min Dust Extraction Port Diameter (Surfacing): 120 mm Dust Extraction Port Diameter (Thicknessing): 120 mm Purchase Price (Net): €15,000 plus applicable VAT. VAT will be shown separately on our invoice. Note: The equipment text or equipment description is taken from the original purchase invoice and has not been checked for accuracy or completeness. Deviations are possible! Financing possible Upon request, we can arrange suitable financing through our company. Please feel free to contact us. Subject to changes, errors and prior sale. Sale is made without guarantee or warranty and only to commercial customers. Inquiries will be processed from Monday to Friday between 8 a.m. and 4 p.m.

Condition: used, Year of construction: 2011, AXES Working area X-Y-Z axes * mm 3050-1300-180 Workpiece length in swivel machining mm 1390 Stroke X-Y-Z axes mm 3460-1735-250 Max. travel speed of the X-Y axes m/min 60 Chsdpfx Aisyymz Uoied WORKING TABLE Number of workpiece supports and vacuum cups 6 / 2 Standard type Standard End stops / Position 1 / rear Vacuum pump m3/h 90/108 DRILLING UNIT Vertical spindles Std/Number/Speed 1/min 12 (8X-5Y) / 4000 Horizontal spindles Std/Number/Speed 1/min 6 (4X-2Y) / 4000 Integrated slotting/sawing unit in X Ømm/1/min 120 / 6000 Motor power kW (HP) 2.2(3) ELECTROSPINDLE Motor power Std. / Opt. (S6) kW (HP) 7.5(10) / 11(15) Max. speed 1/min 24000 Tool changer mounted on the unit carrier in X 4 positions, pneumatic INSTALLATION Installed power KVA 23÷28.5 Compressed air requirement Nl/min 450 Extraction air requirement m3/h 1900+1900 (3400) Required extraction air velocity m/sec 30 Extraction nozzle diameter mm 150+150 (200) Machine weight Kg 3000 * X Distance between the stops - Y Milling center as reference point; Z Workpiece passage GENERAL FEATURES CNC-controlled boring and milling center, in C-frame design and working table with adjustable workpiece supports and vacuum cups, for performing: - Vertical drilling on the surface of the panel - Horizontal drilling on all four sides of the workpiece - Slot milling with disc cutter in "X" direction - General milling operations Self-supporting structure and working table Structure made of a steel welded construction with the control cabinet integrated into the machine frame. Available in two different lengths and with standard workpiece supports or TV supports. Movable unit carrier Box construction made of cold-rolled steel with internal reinforcing ribs, protective devices with bumpers. Working unit Consisting of a drilling head with vertical spindles, horizontal spindles, an integrated slotting and sawing unit and an SCM electrospindle with tool quick-change system type HSK 63 F. Travel paths of the portal and the unit carrier Movement in the X, Y and Z axis takes place on linear prismatic ball-bearing guides with the aid of pre-tensioned linear guides. The power transmission of the X-axis (movable stand) takes place via a pre-tensioned, backlash-free rack and pinion drive with diagonal movement. The movement of the unit carrier in Y and Z direction takes place via pre-tensioned linear guides. The positioning of the working units and the control of the machine functions takes place via "Brushless" three-phase servomotors and digital drives. CNC CONTROL The control unit consists of a numerical control for the milling and drilling machines and a pre-connected personal computer with a graphical user interface "XILOG PLUS". PC -Office- operating system Windows XP - LCD color screen 17 - Qwerty keyboard - Swiveling control panel - Machine interface software Xilog Plus Xilog Plus features Programming - parametric, graphical and ISO programming - Import of DXF and ASCII files - Linear or circular interpolation in three axes, linear in space, spiral in the chosen plane - Supported programming with graphic and syntax aids for drilling and milling operations - Automatic optimization of drilling operations and tool changes - cycles - Possibility of plate zero-point shift for performing drilling on inclined or curved plate sides - Complete compatibility with CAD/CAM Routocam (SCM) - AlphaCam Integrated additional functions - Calculator for direct transfer of the calculated data.

Condition: excellent (used), Year of construction: 2003, Edge banding machine SCM Cjdpfx Aiozynngeiehd Type: Contour

Condition: excellent (used), Year of construction: 2012, functionality: fully functional, working width: 240 mm, spindle diameter: 40 mm, working height: 120 mm, overall weight: 5,050 kg, power of feed motor: 11 W, spindle speed (max.): 8,300 rpm, spindle speed (min.): 8,300 rpm, jointer table length: 2,500 mm, number of spindles: 6, Four side planer SCM TOPSET XL: - working width: 240 [mm] - working height: 120 [mm] Csdpfoizxf Hjx Aiiehd - number of spindles: 6 - spindle diameter: 40 [mm] - feed speed: 6-60 [m/min] Planer in very good condtion. First owner!

Condition: like new (used), Year of construction: 2012, functionality: fully functional, I sell the horizontal foil wrapping packing machine Producer: SCM GROUP, Italy Model: PACK 8080 Year: 2012 / like NEW, almost not used before Working circle diameter 1300mm. Cjder Alx Ujpfx Aiijhd Working tables width 900mm. Feeding manual with tables total length 2,60m Assembled, ready for work. Avialable immediately. On stock.

Condition: used, Year of construction: 2020, max. workpiece length 6360 mm profile spindle 1 Stück main drive 13 kW Control Maestro SCM CNC Machining Center ACCORD 40 FX for windows and doors ----- Available as an OPTION at an additonal price extensive window and door tooling among others (window cutting available upon request!): Wooden windows IV 68, 78, 92 Wooden "style" windows Wood-aluminum windows Front doors Lift-and-slide doors Box windows 2) IT integration with a post-processor ----- Machine still in operation, available for viewing! ----- Technical Summary (detailed description available upon request!): ----- - Working area X-Y = 6360 x 1905 Z = 350 - Automatic table with 8 support rails MATIC - L1825 - 5-axis spindle MAXI - Prisma T, HSK 63 E, 13 kW - RTCP Setting - Self-calibration system for Prisma work unit - Adjustable chip removal device on the electric spindle - Preparation for "Prisma T-S" angle gearbox - BRC - Working unit: Saw blade for face machining, 1 vertical milling cutter connection 3 vertical, independent drill heads, center distance 32 mm 3 vertical drill heads (not independent), center distance 21.5 mm, for mortise drilling 4 horizontal drill heads (2 per side, not independent), center distance 21.5 mm 2 horizontal milling heads (1 per (Page) - TRC 48 - Rear Tool Magazine 48 tool positions (excluding tool holders) Center-to-center distance between positions: 104 mm Max. tool diameter: 350 mm Max. tool length: 320 mm Max. weight per tool: 10 kg (15 kg with HSK 63 E spindle) Max. total weight on the magazine: 250 kg - MACH 5 - Quick-change system: Allows tool changes on the electric spindle in just a few seconds. - Pendulum operation - Automatic lubrication of the axes - eye-M operating console with integrated PC - Additional fixed control panel - TECPAD - Remote control of machine functions - Clamping jaw preparation H145 for worktable with 8 support rails - Front stop row H110 for worktable with 8 support rails - Rear stop row H110 for worktable with 8 support rails - Suction cup H110 145x145 mm - Swivel suction cup H110 145x55 mm - Swivel suction cup H110 180x65 mm - First side stop row H145 for worktable with 8 support rails Second side stop row H145 for worktable with 8 support rails Clamp H145 with round base Clamp H145 with square base N.6 Lifting devices with double stroke H145 Laser and reference stop H145 for sheet (left) - PRO-SPEED safety system - Maestro CNC - Machine operator interface and programming - Maestro ProView - Simulation software Tools are sold in the condition, scope, and with accessories as they are currently in stock. Cjdsy Hl Iyopfx Aiiohd Note regarding window cutouts, tool drawings, and tool system listings: Engelfried GmbH does not guarantee that the tools actually available correspond to the systems listed and drawn. (Technical specifications according to the manufacturer - without guarantee!)

Condition: used, Year of construction: 2013, .30 Base machine ACCORD 30 FX N. 1 CONCEPTCNC machining center with a moving gantry and a fixed worktable for processing various sheet-like materials: chipboard, MDF, laminated solid wood, plastic materials, and light alloys. STRUCTUREThe machine is developed using the best three-dimensional CAD systems for solid modeling. The machine bed and moving crossbeam represent the two main elements of the machine structure and are manufactured in the company's own foundry. All mechanical machining operations are carried out on special production equipment in a single setup to ensure optimal precision and to minimize tolerances during machining. The control cabinet is mounted directly on the machine bed, allowing for a very compact design and easy access. CONTROL UNITThe control unit consists of an industrial NC control system with an integrated office PC (desktop computer). The CNC solution with an office PC combines all the features of numerical control with the typical user-friendliness of an office PC, which greatly simplifies the control of the machine by enabling the use of the XILOG MAESTRO user interface, i.e., the software developed by SCM for simple and fast programming, even for non-experts. GENERAL FEATURESPassage height: - 250 mm with H50 accessories- 190 mm with H110 accessoriesPendulum machiningAutomatic lubrication of the axesAir conditioning system to maintain the correct internal temperature in the control cabinet. Software for remote customer serviceOperator interface Xilog MAESTRO with integrated CAD/CAM, which allows for the extremely simple execution of products even with special shapes.A number of advanced functions allow for: - programming via macros- creating and managing subprograms- optimizing machining- managing all machine functions- creating and managing a database of tools93.07.31 Voltage 400 EU 93.12.01 Frequency 50 Hz R0.00.03 LINGUA P.C. GERMAN 02.12.57 ACCORD 30 FX - Worktable X-Y = 3680x1380 56.05.25 No. 6 Support rail MATIC - L1300 The worktable is equipped with: - no. 2 lateral fixed supports- no. 6 aluminum supports, motor-driven and movable along the X-axis- motorized conveyor belt for unloading chipsEach movable support has: - no. 3 motor-driven support rails for clamping cylinders and vacuum suction cups- air blower for cleaning on each movable support- pneumatic locking/release for quick replacement of the clamping cylinders and vacuum suction cups- preparation for lifting devices- preparation for reference stopsThe workpiece vacuum clamping system is divided into 2 independent worktables.23.02.19 DUO Prisma K working unitThe working unit with 5 interpolating axes is located on the moving crossbeam, which provides maximum stability during milling and thus also ensures optimal machining quality of the workpieces, even with high material removal rates. It allows for rotation around the axes arranged at 50° to each other and has many advantages over traditional 5-axis working units, such as: - the full use of the work areas both with 5 axes and with a vertical spindle- spindle external dimensions outside the working area- a particularly light design for horizontal machiningThe unit has a central chip extraction system. Chodpfxozl Ap No Aiiod