Used Scm Multiflex for sale (594)

Condition: excellent (used), CNC Woodworking Center. Ledpfswmxkhjx Ab Uoah

Condition: excellent (used), Year of construction: 2000, I sell the window angular centre SCM Multiflex. Moulding heads VIVALDI EU68mm. Cutting + Tenoning spinde right side / Tenoning side. 2 pcs. Profiling spindles + glass strip cutting machine left / Profiling side. Available immediately. Lajdpjhw Dfysfx Ab Ujh

Condition: excellent (used), SCM Multiflex angle centre for single-sided cross and longitudinal machining of window and door corners Tensioning spindle length 320mm, max. working range 320mm Feed system with rollers Profiling spindle length 320mm, max. working range Lsdpfowmcnwox Ab Ujah

Condition: excellent (used), Wide Belt Sander for Calibration and Fine Sanding SCM Model RCS 1st Unit: Calibration Roller, Steel 2nd Unit: Combination Unit (Roller 60 Shore, sanding pad with 2 inserts – hard, soft) Working width: 920 mm Abrasive belt dimensions: 930 x 1,525 mm Main motor power: 11.0 kW, 400 V, 50 Hz Feed motor power: 0.37 kW, 400 V, 50 Hz 2 feed speeds Electromotive table height adjustment Main switch lockable 2 x emergency stop Table extension with 2 rollers, front and rear Sanding pad inserts fitted with new graphite cloth Including as-new sanding belts All documentation included Note for used machinery: • Specifications, data, and prior sale are subject to change. • Prices stated are ex works – free loaded! Ljdpfx Abjxqggcs Usah • The machine has been cleaned and functionality tested. • All machines are sold as seen without any rights to warranty. Buyers are welcome to inspect the machines on site. • Special agreements are only valid in written form. (We only respond to inquiries that include your address and telephone number!)

Condition: used, Four-sided planer moulder SCM Sintex NTE Laodpfx Abjxqf Dyj Ueh Electronic four-side planing and profiling machine Planing width: 180 mm Planing height: 105 mm 4 spindles Spindle motor 1 + 4: 7.5 kW Spindle motor 2 + 3: 7.5 kW Spindle diameter: 35 mm Long infeed table approx. 2300 mm Spindle speed: 6000 rpm Feed speed: 6/12 m/min Electric height and width adjustment Lubrication pump incl. planing tools Machine WORKSHOP TESTED and in VERY GOOD CONDITION Available ex stock Lieboch / LEASING POSSIBLE

Condition: used, Year of construction: 2011, · Working area: 2,550 x 1,067 mm · X-Y travel: 2,980 x 1,450 mm · Z-axis travel: 150 mm · Passage height: 120 mm Drilling unit F14: · Drilling head with 8 + 6 spindles · 5 individually selectable vertical spindles in X · 3 individually selectable vertical spindles in Y · 4 horizontal spindles in X (2+2) · 2 horizontal spindles in Y (1+1) · Speed: 4,000 rpm (6,000 rpm optionally available) · Power: 2.2 kW · Grid spacing: 32 mm · Drill holder: M 10 with 11 mm centering · Pneumatic feed stroke: 60 mm Grooving saw unit in X: · Integrated in drilling head · Grooving saw blade with diameter up to max. 120 mm Main milling unit: · Tool holder HSK 63F · Speed 1,500 - 24,000 rpm, infinitely variable by inverter · Motor power 6.6 kW (9 HP) from 12,000 rpm (S1) · Motor power 7.5 kW (10 HP) from 12,000 rpm (S6) · Right/left rotation · Ceramic bearings · Prepared for use with angle heads Tool changer TR10: Automatic side tool changer for 10 tools. · Number of tool stations: 10 · Max. tool diameter: 120 mm · Max. tool weight: 4.5 kg · Max. total weight of all tools: 28 kg Ledpfx Asxqd Sceb Ueah A central extraction nozzle combines all processing units into one connection with D = 200 mm. This reduces the required extraction capacity to approx. 3,200 m³/h. Worktable TVF: The worktable is designed to guarantee maximum operator freedom of movement. The quick-release vacuum system provides maximum flexibility for precise positioning and optimal holding of workpieces. · 4 TVF supports L = 1,100 mm, infinitely adjustable in X · 12 TVF vacuum pods 120 x 120 mm, infinitely adjustable in Y · 2 stops in X (1 x left / 1 x right) · 1 stop in Y per support (a total of 4 pcs.) · The retractable reference stops are CNC-controlled Automatic central lubrication: The correct amount of lubricant is distributed via an electronic CNC control unit (X, Y, Z axes). Vacuum system (base machine): · Vacuum pump: 90 m³/h · Power: 2.2 kW · Max. vacuum (at pump): 0.9 bar PROGRAMMING SYSTEM XILOG PLUS Software features: - Import of DXF files - Import of ASCII files - User interface in operator's native language Safety devices with bumpers Machine technical data: · Total connected load max.: 18 kW · Recommended fuse: 64 A · Power supply: 400 V, 50-60 Hz · Compressed air: 6-7 bar · System pressure (recommended): 8 bar · Compressed air consumption: 200 Nl/min · Central extraction nozzle diameter: 200 mm · Extraction speed: 30 m/sec · Air consumption (central extraction): 3,200 m³/h · Vacuum: 3,000 Pascal · Weight: approx. 2,500 kg Remote control of machine functions 6 TVF supports L = 1,100 mm and 18 vacuum pods 120 x 120 mm Cross laser for positioning vacuum pods Two cross lasers mounted on the aggregate carrier serve for easy positioning of the vacuum pods. Location: Supplier

Condition: used, Year of construction: 2004, total length: 3,600 mm, total width: 1,800 mm, total height: 1,750 mm, Weight: 970 kg Price: On request - Roller table length [mm]: 3200 - Table width [mm]: 1040 - Min. saw blade diameter [mm]: 300 - Max. saw blade diameter [mm]: 400 - Options: Scoring unit - Spindle speed: - └ Min. spindle speed [rpm]: 3000 - └ Max. spindle speed [rpm]: 5000 - Scoring unit: - └ Spindle speed pre-cutter [rpm]: 8500 Lasdpfx Aboxdlxke Ush - Year: 2004 - Documentation available: No - Serial number: AB/166667 - Voltage [V]: 400 - Current consumption [A]: 18 - Transport dimensions: 3600mm x 1800mm x 1750mm (l x w x h) - Transport weight [kg]: 970kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), SCM F520 Jointer Working width: 520 mm Four-knife cutterhead Traditional knives Electronic raising and lowering of the worktable Lajdjxp Ic Nepfx Ab Ush Main fence adjustable up to 45° Table length: 3000 mm CE certificate DTR documentation

Condition: excellent (used), Catalogue number 7738 TECHNICAL DATA SURFACE PLANER: - shaft width 500mm - 4-knife shaft - noise-dampening comb Lajdpjxcx Ucjfx Ab Ueh - shaft guard - adjustable angle fence - table length 2200mm - longer infeed table 1180mm - both tables adjustable THICKNESSER: - max workpiece thickness on thicknesser 240mm - thicknesser shaft guard *from above: - anti-kickback fingers - toothed, swiveling infeed roller - pressure bars - cutterblock - pressure bar - smooth outfeed roller - adjustable roller in lower table - two feed speeds 7/14 m/min - main motor 5.5kW - electric brake - extraction port diameter 150mm - dimensions L/W/H 2300x950x1100mm - weight 910kg ADVANTAGES – Italian manufacture – 4-knife cutterblock – long tables – perfect condition, not repainted – used surface planer-thicknesser Net price: 21,900 PLN Net price: 5,150 EUR depending on exchange rate 4.25 EUR (Prices subject to change with higher fluctuations)

Condition: used, SCM S 630 Heavy-duty thickness planer – for joinery, carpentry Planing width 630 mm Planing height 300 mm 4-knife safety cutterblock, auto brake / indicator light Lodpjxp H D Sefx Ab Ueah 7.5 kW main motor Electronic thickness table adjustment Digital/LED Infinitely variable feed 6–20 m/min. Machine from training workshop in TOP CONDITION Available ex stock Lieboch

Condition: used, Year of construction: 2016, TECHNICAL DATA AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Drilling/slotting working area mm 0 x 800/0 x 800 X axis stroke mm 750 Max. travel speed of X-Y axes m/min 25 DRILLING UNIT Vertical spindles Number 7 (4X-4Y one common) Horizontal spindles (along the Y axis) Number 2 (1+1) Horizontal spindles (along the X axis) Number 1 Fixed grooving saw (direction) X Grooving saw diameter mm 100 Max. grooving saw thickness mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Grooving saw speed rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air requirement bar 6 Compressed air consumption Nl/cycle 90 Extraction requirement m3 / h 1200 Extraction air speed m / sec 20 Extraction nozzle diameter mm 80+80 F10L Drilling unit Includes: - 7 independent vertical spindles - Drill chuck D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads, 1 in X direction with one drill, 1 double drilling head in Y direction (1 + 1 drill chuck D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. Diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic travel per spindle 70 mm - Horizontal pneumatic travel of the drilling unit. Positioning of the workpiece and drive of the work unit: A CNC-controlled suction cup clamps the workpiece and positions it sequentially under the work unit during machining. Movement in the X and Y axes takes place on THK guides with transmission to reinforced toothed rails. Movement in the Z axis is pneumatically controlled on ball-bushing guides with adjustable stop positioning. The positioning of the work units is carried out using technology and drives with DC motors. CNC CONTROL The control system was specially developed for use in drilling and milling machines. CN - 7" color screen with touchscreen function - Alphanumeric keyboard - Self-diagnosis and any error messages or malfunctions that may occur, in the operator's language Programming - Programming via the CN - Automatic optimization of drilling operations - Option of plate zero point shift - Option of saving and importing drilling programs via USB dongle - Option of importing drilling programs from CAD-CAM external software Configuration - User interface in the same language as the instruction manual Graphic representation of the unit configuration Vacuum suction cups "B-Power Vacuum suction cups with double vacuum connection, recommended for particularly porous panels (e.g. MDF light). Machine user interface software Xilog Maestro USB Hardware and software requirements: - Operating system: Windows XP Professional (SP2), Windows Vista or Windows 7 - Processor: Intel compatible, 2GHz min; Multicore processor recommended - Memory capacity: 1GB min., recommended 2GB - Free disk space: 5GB - Graphic card: Compatible OpenGL (The code includes a DVD for installation and a USB key) Xilog Maestro Features Programming - Parametric, graphic programming - Assisted programming with graphic and syntax help for drilling operations - Possibility to create and save machining macros Integrated additional functions - Self-diagnosis and possible error messages or malfunctions, in the operator's language - User interface in Ledovvi I Rspfx Ab Ujah

Condition: excellent (used), Catalogue No. 7713 TECHNICAL DATA - Max. working width: 240 mm - Max. working height: 130 mm - 6 spindles: 1) Lower horizontal 240 mm, 7.5 kW 2) Right vertical 130 mm, 5.5 kW 3) Left vertical 130 mm, 5.5 kW 4) Upper horizontal 240 mm, 7.5 kW Ledpfxjw H Aqxe Ab Uoah 5) Upper horizontal 240 mm, 5.5 kW (spindles 4 and 5 electrically adjustable up/down) 6) Lower horizontal 240 mm, 5.5 kW - All spindles adjustable up/down, right/left - Spindle diameter: 40 mm * From above: - 8 metal, toothed infeed rollers, including 3 double rollers - 4 rubber outfeed rollers, smooth, including 2 double rollers * From below: - 3 smooth feed rollers - 3 side pressure rollers - Infinitely variable feed speed control via inverter - Pneumatically pressed rollers - Feed motor: 7.5 kW - Kardan shaft drive feed - Electrically adjustable planing thickness - Body lifting motor: 0.75 kW - Infeed table length: 2480 mm - Pneumatic opening/closing of the safety cover - Pneumatic table blow-off - Centralized table lubrication - Extractor port diameters: 3x120 mm, 3x150 mm - Dimensions (LxWxH): 5300 x 1700 x 1800 mm - Weight: 5000 kg ADVANTAGES - Made in Italy - 6-head configuration - For wet and dry timber - Pneumatic safety cover opening - Pneumatic table blow-off - Spindles 4 and 5 electrically adjustable - Used planer, very good condition Net price: 136,900 PLN Net price: 32,200 EUR (based on exchange rate 4.25 EUR) (Prices may change with significant fluctuations)

Condition: used, Year of construction: 2018, Startech cn MAIN FEATURES FLEXIBLE AND CUSTOMIZED PRODUCTION COMBINED WITH SPEED AND PRECISION DRILLING FROM ABOVE WITH REFERENCE TO THE TOP OF THE PLATE ALLOWS ABSOLUTELY PRECISION MACHINING NUMERICAL CONTROL WITH 7" COLOR SCREEN: SIMPLE AND INTUITIVE TECHNICAL DATA Startech CN AXES Max. workpiece dimensions X-Y-Z mm 3050 x 800 x 50 Min. workpiece dimensions X-Y-Z mm 300 x 90 x 10 Drilling/slotting work area mm 0 x 800/0 x 800 X-axis stroke mm 750 Max. travel speed of the X-Y axes m / min 25 DRILLING UNIT Vertical spindles number 7 (4X-4Y one of them common) Horizontal spindles (along the Y axis) Number 2 (1+1) Horizontal spindles (along the X axis) Number 1 Fixed groove saw (direction) X Diameter of the groove saw mm 100 Max. thickness of the groove saw mm 5 Motor power kW (HP) 1.5 (2) Spindle speed rpm 3350 Speed of the groove saw rpm 4300 INSTALLATION Power supply V (Hz) 380 / 400 (50 / 60) Installed power KVA 4.5 Compressed air demand bar 6 Compressed air consumption Nl/cycle 90 Extraction demand m3 / h 1200 Extraction air speed m / sec 20 Extraction nozzle diameter mm 120 GENERAL CHARACTERISTICS Universal CNC drilling machine with work table with fixed gantry and movable workpiece for performing the following machining operations: - Vertical drilling on the panel surface - Horizontal drilling on all four sides of the workpiece - Groove Milling with integrated groove saw in the "X" direction. Self-supporting structure. Machine frame made of tubular steel to provide a large base for the work table. The structure is positioned on three self-leveling feet. The electrical control cabinet is integrated into the machine frame. "Easy Motion" central Bakelite support table: - an MDF sector for through-hole drilling, automatically pivoting for horizontal drilling - an infeed roller that facilitates panel loading - a rear roller conveyor that facilitates panel sliding - left and right stops - a central aligner with manual adjustment. The left and right stops are required to drill the two opposite sides of the panel horizontally in the "X" direction. Panel positioning along the X axis is achieved by means of suction cups. Unit support. This is a gantry structure made of tubular steel. The main machining unit is installed on the gantry. F10L drilling unit includes: - 7 independent vertical spindles - Drill chuck D10 mm - Distance between spindles 32 mm - 2 horizontal drilling heads, 1 in X direction with a single drill, 1 double drilling head in Y direction (1 + 1 drill chuck D10 mm) - Speed 3350 rpm - 1 integrated sawing unit in X (max. diameter 100 mm) - Saw blade speed 4300 rpm - Motor power 1.5 kW - Vertical pneumatic travel per spindle 70 mm - Horizontal pneumatic travel of the drilling unit Positioning of the workpiece and drive of the machining unit A CNC-controlled suction cup clamps the workpiece and positions it sequentially under the machining unit during machining. The movement in X and Y axis is carried out on THK guides with transmission on reinforced toothed Movement in Z axis is carried out pneumatically on "ball-bushing" guides with positioning on stop adjustable via the positioning of the working units is carried out via technology and drives with -CONTROL The control was specially developed for use Lodpjvwbp Ajfx Ab Uoah

Condition: excellent (used), CATALOGUE NUMBER 7618 TECHNICAL DATA - shaft width 500mm - number of knives 4pcs - max. thickness of the processed element 230mm from above: - pawls - toothed, pulling, torsional, sequential input shaft - clamps - planing shaft - clamp - smooth pulling output shaft Laedpfewbdlyox Ab Ush from below: - 2 sliding rollers in the table - 5.5kW motor - manual lifting of the table - 2 types of feed speed 7.5;13m/min - diameter of the extraction nozzle 160mm - dimensions length/width/height 1100x1000x1200mm - weight 600kg ADVANTAGES - Italian production - unpainted - used thicknesser, very good condition Price net: PLN 15,900 Net price: EUR 3,740 depending on the price of EUR 4.25 (Prices may change with higher fluctuations)

Condition: used, Year of construction: 2023, Technical Data Working Area I.M.S. I.U. Working area X axis 5515 mm (217") Working area Y axis 1620 mm (63¾") Material passage Y 1900 mm (74¾") Material passage Z 250 mm (9¾") Workpiece length for pendulum processing 2600 + 2600 mm (102" + 102") Traverse speed of X-Y axes PRO-SPACE 56 m/min (184 ft/min); Traverse speed of X-Y axes PRO-SPEED 78 m/min (256 ft/min). *For further details, please refer to the corresponding machine layout. With the 5-axis motor, the Y working area increases to 1680 mm (66") for JQX motor, or 1720 mm (67½") for KS/KT motor. Max. loadable panel width during horizontal drilling, spindle oriented vertically only, with no middle reference stops. Installation Data I.M.S. I.U.: Installed power: 23 – 28.5 KVA Electrical specifications: 400 V, 50 Hz, 3 phases Air consumption: 450 Nl/min Compressed air consumption: 4500 m³/h (2650 CFM) Extraction air speed: 30 m/s Extraction port diameter: 250 mm (9.8") Noise level VSA* / LAV*: Drilling 72.2 dB(A) / 74.6 dB(A), Milling 74.3 dB(A) / 80.7 dB(A) Reference standard: EN ISO 11202:1995 Laodpfx Aowb Trpeb Ujh *VSA = without load and without extraction *LAV = in operation, with extraction Location: Nattheim

Condition: excellent (used), Catalogue number 7788 Lsdsxpv D Ijpfx Ab Usah TECHNICAL DATA - Shaft width: 640mm - Number of knives: 4 pcs - Max thickness of workpiece: 240mm – From above: - Anti-kickback fingers - Pressure bar - Serrated, feeding, pivoting infeed roller - Pressure bar - Planing cutterhead - 2 smooth, feeding, metal outfeed rollers - Digital thickness display - Motor: 7.5kW - Electric table height adjustment - Infinitely variable feed speed - Suction outlet diameter: 150mm - Overall dimensions (L/W/H): 1260x1160x1080mm - Weight: 895kg ADVANTAGES – Italian-made – Electronic thickness display – Electric table adjustment – Used thickness planer, very good condition, technical documentation (DTR) Net price: 24,900 PLN Net price: 5,860 EUR (based on 4.25 EUR rate) (Prices may vary with significant fluctuations)

Condition: used, Year of construction: 2011, Working size in X-direction: 2770 mm Working size in Y-direction: 1220 mm Working thickness (Z-dimension): 80 mm Machine design: Gantry-type machine Main spindle power: 11.0 kW Main spindle speed: 1500 - 24000 rpm Vector controlled spindle: Yes Clamping system: HSK 63 F Spindle cooling: Air cooling Number of axes: 3 Tool changer: Yes Tool changer positions: 10 Keyboard: Yes Lsdpfovvi Htjx Ab Uoah Mouse: Yes Programming system: Xilog Plus DXF interface: Yes Online connection possible: Yes CD-ROM drive: Yes Table type: Matrix table Stop system: Stop cylinders Number of vacuum pumps: 1 Vacuum pump capacity: 250 m³/h Safety: Safety tread mats Storage location: Sonnefeld

Condition: excellent (used), Catalogue number 7790 TECHNICAL DATA - Max. workpiece width: 1100mm - Max. workpiece height: 170mm - 2 units: - rubber pressure roller 1) knurled metal calibration roller - rubber pressure roller 2) knurled rubber roller + shoe + metal roller - rubber pressure roller - Motor power for units I and II: 11kW Laodjxpvuyopfx Ab Ueh - From below: - 3 metal sliding rollers - Feed belt - 2 metal sliding rollers - Pneumatic belt oscillation - Electric and manual table lifting (for precise adjustment) - 2 feed speeds - With pneumatic brake - Working pressure: 8 bar - Extraction port diameter: 2x160mm, 4x100mm - Overall dimensions (L/W/H): 2000x1600x2100mm - Weight: 1170kg ADVANTAGES - Non-repainted - Italian manufacture - 2 units - DTR technical documentation - Used sander in very good condition Net price: 36,900 PLN Net price: 8,680 EUR based on exchange rate 4.25 EUR (Prices may change subject to higher fluctuations)

Condition: used, Year of construction: 2004, Storage location: Nattheim Ljdpovvi Hyofx Ab Usah

Condition: excellent (used), Catalogue number 7791 TECHNICAL DATA - Max main blade diameter with scorer: 350mm - Max cutting height: 105mm - Main blade adjustable up/down + angle Ljdpoxpvk Ijfx Ab Uoah - Spindle diameter: 30mm - Spindle locking - With sliding table - Cutting length with carriage: 1430mm - Cutting width at the fence: 1000mm - With side table - With scorer - Max scorer diameter: 80mm - Scorer spindle diameter: 20mm - Main motor: 5.5kW - Extraction nozzle diameter: 100mm - Table size: 115x625mm - Table size with extension and widening: 2150x1105mm - Blade guard - 3 rotation speeds: 3200/4500/6000rpm - Dimensions (LxWxH): 2300x3350x1520mm - Weight: 746kg Net price: 11900 PLN Net price: 2800 EUR at an exchange rate of 4.25 EUR (Prices may change with significant fluctuations)

Condition: used, Year of construction: 2020, CNC-CONTROLLED MACHINING CENTER WITH MULTIFUNCTIONAL TABLE - WORK CELL VERSIONX400 CELLDrilling and milling made for you!The numerically controlled machining center is equipped with a wide range of milling/drilling tools to meet every need in the processing of wood and similar materials.- More powerful, with drilling spindles with 8,000 rpm and . Technology, the toughest spindle available on the market, with over 1,000 maintenance-free hours of use. Better and more comprehensively equipped, with various configuration options thanks to the multifunctional table to optimally equip the machine according to your needs. Easier and more understandable programming thanks to the integrated MAESTRO CNC CAD-CAM module. Easier to use: the work table is accessible at all times, the electrical cabinet and vacuum pump are integrated, and in the PRO SPACE configuration there are no guards. Supporting structure. The supporting structure consists of a particularly strong monolithic steel base, heavily ribbed and very rigid. The particularly wide support was specifically designed to give the machine stability, ensuring consistent precision regardless of the working conditions and eliminating the need to anchor the machine to the floor. The base forms a large and solid support for the mobile column: the work unit is thus equipped with a balanced, stable, and durable support that can withstand the most extreme stresses, ensuring higher quality performance and greater precision. The mobile gantry consists of a single, solid unit anchored to the base on both sides and slides on pyrotechnic guides with top-quality ball-return slides. The dual motorization along the X-axis ensures top performance even under demanding working conditions. The movement of the lower moving unit (X-axis) and the working unit along the rod of the moving unit (Y-axis) is achieved thanks to a rack/pinion transmission with helical teeth. this creates a greater tooth-to-tooth thrust which achieves greater acceleration and greater speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures absolute quality of finishes as any vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters; These ensure: - Reduced processing times thanks to improved acceleration - Better positioning accuracy thanks to the high-resolution encoder - Zeroing of setup operations when switching on the machine thanks to absolute encoders - Zeroing of general maintenance operations since there are no brushes with the "brushless" system The management of the axis displacement and, in general, of the machine's working elements is carried out by an industrial NS module with digital D Laedpfx Abevvi N Io Ueh

Condition: used, Year of construction: 1999, Storage location: Nattheim Laodpfxovvi Rxs Ab Ush

Condition: used, Year of construction: 2019, Incl. tools CNC-CONTROLLED MACHINING CENTER morbidelli m100 Drilling and milling made for you! This numerically controlled machining center is equipped with a wide range of milling and drilling tools to meet every woodworking requirement. - Highly powerful - with 8,000 rpm drilling spindles and . technology, the most stable spindle available on the market, with more than 1,000 maintenance-free hours of use. - Optimally and comprehensively equipped - the vacuum cleaners can be individually configured with the TV FLEX work table to customize the machine to meet individual requirements. - Easy and understandable programming thanks to the integrated Cad-Cam MAESTRO CNC software - Easy to operate; the lowered machine frame makes the work table accessible at all times. The control cabinet and vacuum pump are integrated into the machine bed, and in the PRO SPACE version, no additional structural protective measures are necessary. Supporting structureThe supporting structure consists of a particularly strong monolithic steel base, ribbed and very robust. The particularly wide support was specifically designed to give the machine stability, ensuring constant precision in all working conditions. The machine does not need to be anchored to the ground. The base provides a large and solid support for the mobile column: the work unit is equipped with a balanced, stable and resistant support that can withstand the most extreme stresses, ensuring superior performance and greater precision. The mobile gantry consists of a solid single part anchored to the base and the work unit is fixed to it and moves along Y and Z axes, also on prismatic guides with ball return sliding blocks of the highest quality. The movement of the lower moving unit (X-axis) and the working unit along the crosshead of the moving unit (Y-axis) is achieved thanks to the power transmission via a rack and pinion with helical teeth; This creates a greater tooth-to-tooth thrust, which achieves greater acceleration and higher speed along the X and Y axes. The specially designed helical gearing ensures less wear on the mechanical components and less noise. The vertical Z axis is driven by a screw with ball return, which ensures perfect balance with dynamic loading and strong acceleration and deceleration. The main milling unit is directly coupled to the Z axis carriage and ensures very high quality finishing as vibrations are completely eliminated. Translation along the X-Y-Z axes is carried out by brushless motors driven by static inverters. These ensure:- Reduced machining times thanks to improved acceleration- Better positioning accuracy thanks to the high resolution encoder- Elimination of setup operations when switching on the machine thanks to absolute encoders- Elimination of general maintenance operations as there are no brushes with the "brushless" systemThe management of the axis displacement and in general of the working elements of the machine is done via e Ledpevvi Scefx Ab Ueah

Condition: used, Storage location: Nattheim Ljdpfowkirqsx Ab Ujah

Condition: used, Year of construction: 2004, Saw unit: pivots 45°. Carriage length: 3200 mm. Maximum saw blade diameter: 450 mm. Saw blade bore: 30 mm. Motor power: 7.5 kW. Max. Cutting width: mm Control panel: at eye level Height adjustment: input via keyboard Tilt adjustment: input via keyboard Tilt angle display: digital Cutting width display: digital Table extension length: yes Cross-cutting at the cross stop: 3200 mm Cross stop display: scale Scoring device adjustment: electric Scoring blade: PSV Protective cover: yes End position lock: yes Automatic motor brake: yes Speeds: 2500/3500/5000 rpm Description: Cutting height at 450 sheets, 150 mm Weight approx.: 1180 kg Dimensions: 3200 x 1800 x 1800 mm Extraction diameter: 1 x 80, 1 x 120 mm Storage location: Nattheim Ledpfxjwayx To Ab Usah