Used Saw Shaft Construction for sale (27,674)

Condition: used, Year of construction: 2011, Slider length: 3000 mm Cutting width with fence: 1000 mm Cutting width with rip fence: 3200 mm Cutting depth: 154 mm Scoring saw: yes Saw blade height adjustment: electric / position control Saw blade swivel adjustment: electric / position control Fence adjustment: electric / position control Rip fence adjustment: manual Saw blade angle display: digital display Cutting height display: digital display Fence display: digital display Rip guide display: scale Rip guide with miter function: yes Saw blade diameter: 450 mm Speeds: Vario Motor power: 5.5 kW Dust extraction port: 80 and 120 mm Machine length: 3200 mm Lsdpfx Amszdza Dovehh Machine width: 2000 mm Weight: 1200 kg

Condition: used, Year of construction: 1991, Slider length: 3300 mm Cutting width at the rip fence: 1000 mm Cutting width at the crosscut fence: 2800 mm Cutting depth: 170 mm Scoring blade: no Saw blade height adjustment: hydraulic Saw blade swivel adjustment: hydraulic Rip fence adjustment: manual Saw blade angle display: scale Cutting height display: scale Rip fence display: scale Crosscut fence display: scale Saw blade diameter: 500 mm Speeds: 2800 / 4000 / 5500 Motor power: 5.5 kW Dust extraction connection: 80 and 120 mm Lsdpfxezdzbhe Amvehh Machine length: 4000 mm Machine width: 2200 mm Weight: approx. 1300 kg

Condition: used, Year of construction: 2024, 12 months warranty, excluding the engine. Lhjdpfxszgdm Ej Amvoh

Condition: good (used), functionality: fully functional, Cutting speed, continuously variable: 20-70 m/min Saw blade: 3660 x 27 x 0.9 mm Lhsdpfx Amszgdbievoh Feed length: 400 mm Cutting range – round / square: 250 / 250 mm Cutting range – rectangular: 300 x 260 mm

Condition: used, Year of construction: 2007, Here we have a Batch size one line capable of cutting strips down to length and edging either all four or just two short edges Machines in the line are Ledpfx Amezgc H Revjhh Saw(Loading) Holzma Saw 0-242-06-7225 (Year 2007) HOP 11/16/32/X Loading Bargstedt 0-280-16-1695 (Year 2007) RTBP410/40/30/12 Edge Homag 0-202-41-3301 (year 2007) KFL 610/26/PU/25/S1 Loading Bargstedt 0-280-16-1696 (year 2007) RTBP410/40/25/12 I have video of the line running just email me to send you them the machine has had a lot of money spent on it to make it run brilliantly

Condition: good (used), Year of construction: 2021, machine/vehicle number: 161000228, functionality: fully functional, input voltage: 400 V, input frequency: 50 Hz, saw blade diameter: 280 mm, rotational speed (max.): 4,100 rpm, total length: 10,000 mm, total width: 1,100 mm, total height: 1,600 mm, overall weight: 700 kg, saw blade speed: 3,200 rpm, ELUMATEC TS 161/21 Undercarriage Circular Saw - Power: 1100 W Lodpfszdyrrex Amvohh - Swivel range: 90° to 45° to the left and 90° to 0° to the right - Includes digital length stop with HECHT manufacturer's control system, as well as a bilateral roller guide, width: 90 mm Attention: the item must be picked up on a fixed date of July 2, 2026, at a time to be agreed upon. FCA D-72770 Reutlingen – loaded onto a truck.

Condition: good (used), Year of construction: 2022, machine/vehicle number: 6947, functionality: fully functional, power: 1.3 kW (1.77 HP), input voltage: 400 V, input frequency: 50 Hz, cutting height (max.): 1,700 mm, total length: 4,500 mm, total width: 900 mm, total height: 2,200 mm, overall weight: 1,000 kg, cutting length (max.): 3,600 mm, WINTER EASYCUT 3216 panel saw Attention: The item must be collected on July 2, 2026, at a date to be confirmed. Lsdpfx Amozdypqovshh FCA D-72770 Reutlingen - loaded onto a truck.

Condition: excellent (used), Year of construction: 2008, machine/vehicle number: 0-240-08-3231, functionality: fully functional, Our Profi HPL 380/38/22/X saw is a brilliant well maintained saw the machine has auto infeed from stacks of board at the back and also a Auto stack at the front for strips. The machine can be run with or with out the auto de-stacker has been well looked after regular serviced by a Homag Uk engineer. I have videos of the saw working so please email me for them. Lhodpjzgcnnefx Amvjh

Condition: used, Year of construction: 1991, machine/vehicle number: DS11, functionality: fully functional, power: 9 kW (12.24 HP), saw blade diameter: 370 mm, Equipment: saw blade guard, Manufacturer: Bäuerle Type: DS11 Year of manufacture: 1991 Lhsdpfx Ajy Tphkjmvoh Power: 2 x 4.5 kW Saw blade diameter: 370 mm Length measuring system (automatic): Shortest dimension: 225 mm Longest dimension: approx. 1900 mm

Condition: good (used), Year of construction: 2022, functionality: fully functional, For sale: 1 x lightly used tent hall from HallGruppen: A tent hall, 40 meters long x 2 meters wide, with 2 doors at one end + 5 small doors (requires self-dismantling). Internal wall height 6 meters and peak height 8.2 meters. External wall height 7 meters and peak height 9.6 meters. Eurocode wind load: 24 m/s, terrain class I Anchoring with ground stakes or other method Weight of fabric: 900 g/m2 Fire class of fabric: B-s2,d0 Consequence class: CC1/KK1 Lsdpfx Amozgccljvohh Sales only to businesses (B2B) – price is net for export or + VAT – viewings welcome in Denmark – subject to errors and omissions Information about the manufacturer: “ Hallgruppen is a well-known supplier of tent halls and temporary structures, especially in the Scandinavian region. The company specializes in the supply of tents, halls, and related structures. Here are some key aspects of Hallgruppen's tent halls: • Large projects: Hallgruppen, for example, built a 30,000 square meter tent camp for a NATO exercise in Inner Troms. • Applications: The tent halls are used for various purposes, including temporary storage, accommodation, and events. • Product range: The range includes robust tent and hall solutions, including specialized constructions such as a 40x20 meter tent hall. • Market position: In addition to the Scandinavian region, the company is also active in the Baltic countries (Hallgruppen Baltics, SIA). Hallgruppen offers customized solutions for temporary space requirements in various industries.

Condition: excellent (used), Year of construction: 2006, Vecoplan VAZ 1300 shredder Lodpfowu Nwhsx Amvohh Hopper inlet 2.26 m x 1.65 m

Condition: excellent (used), Year of construction: 2012, Vernet Behringer HD-X 918 / HBP 410/923 CNC Sawing / Drilling Line – Year 2012. Split system. 3 Spindle. Automatic tool changer. 24 metres infeed. 18 metres outfeed. Gripper Feed measuring system. Infeed and outfeed Cross Transfers. Ledpfx Aox Ruudsmvohh

Condition: excellent (used), Year of construction: 2012, Voortman V613 / VB1050 Split System CNC Drilling / Sawing Line – Year 2012. Rotating Spindle. Automatic Tool changer. 24 metres In-Feed to VB1050. 24 metres Out-Feed to V613 CNC Drilling line. 24 metres Out-Feed. Roller Feed. Lsdpfx Aov U Ea Hjmvehh VACAM CNC Control. Short piece removal.

Condition: excellent (used), Year of construction: 2011, Ficep 1003 DZB CNC Drilling / Sawing Line – Year 2011. 3 Spindles. Automatic Tool Changer. Scribing. Short Piece Removal. Lhsdsxmvnuspfx Amveh Hard Stamping. Gripper feed. Infeed and Outfeed Cross Transfers. 1000mm Section Capacity.

Condition: good (used), Year of construction: 2007, DRILLING MACHINE Operating range V630/1000M Min. / max. height 10 – 450 mm Min. / max. width 60 – 1.050 mm Max. positioning weight 9.000 kg Number of drilling units 3x Lhsdpfsvpafyex Amvsh Automatic tool changer 3x (3x 5 positions) Height measuring Included Width measuring Included Machine weight 12.000 kg Roller feed measuring system Max. speed 42 m/min Min. infeed length 1.500 mm Drilling unit VD40 Feed and positioning servo-motors with servo-invertors Spindle rpm Stepless 100 – 2.500 rpm (servo-motors) Lubrication Internal by mist of air / oil Holder SK 40 Drill diameter oil-tube-drills 8 – 40 mm Drill diameter carbide drills 13 – 32 mm Thread tapping M8 – M24 Centre point marking possibility Yes, 3 sides SAWING MACHINE Sawing machine VB1050 Capacity (h x w) 0° 500 x 1.130 mm Capacity (h x w) +/- 15° 500 x 1.060 mm Capacity (h x w) +/- 30° 500 x 925 mm Capacity (h x w) +/- 45° 500 x 725 mm Capacity (h x w) +/- 60° 500 x 470 mm Saw band speed stepless 40 – 120 m / min Saw drive motor 7,5 kW Saw band dimensions 9.550 x 54 x 1,6 mm Hydraulic band tension 48.000 N Machine weight +/- 8.500 kg

Condition: excellent (used), Year of construction: 2019, HD-SFVO 412-S HBE 320/523 G- YEAR 2019. Marking-drilling-milling-shearing & sawing line HD-SFVO 412-S DRILLING CAPACITY. Flat bars: 50x10 to 400x30 Angles: 50x50x5 to 250x250x20 IPN-IPE: 80 to 400 HEA-HEB: 100 to 400 UPN-UPE: 80 to 400 Square and rectangular tubes: 50x50 to 300x300x20 HBE 320/523 G SAWING MACHINE. Effective cross-section (mm): Lhsdpoy R Tk Rofx Amvsh 90°: 400x300 Bevel cut, left pivot (W x H, mm): 75°: 400x300 60°: 400x300 45°: 330x300 30°: 200x300 Bevel cut, right pivot (W x H, mm): 75°: 400x300 60°: 400x300 45°: 310x300 Power supply: • Three-phase 400V ± 15 V + ground, 50Hz • Installed power: 40 kVA Compressed air: • Minimum pressure: 6 bar • Maximum flow rate: 3 Nm³/h Operating temperatures: • From 10°C to 40°C Milling unit specially designed for machining small square or rectangular tubes (slotted holes, shaped cuts, etc.). With the engraving equipment: ability to engrave letters or numbers for part identification. Allows, among other things, marking of tubes with sufficient depth to ensure legibility after painting or galvanizing Secure holding of the bar during milling: the bar is clamped in the movable vice system to ensure proper machining while minimizing vibrations. Improved positional tolerance of one hole relative to another within a group of holes (within a maximum length of 150 mm) Additional features Cycle for centre punching, countersinking, tapping, deburring, and chip breaking Automatic measurement of tool length (HSS) Side and centre tool cooling 230-ton shear Feature Mobile hydraulic shear Straight cut Average cutting time: approximately 2 to 2.5 seconds Capacities: HEB 140 IPE 300 IPN 280 Angle bars 150x150x18 L 200x100x14 UPE 300 UPN/UPAF 300 Flat bars 300x20

Year of construction: 2007, condition: good (used), Danobat CNC Drilling / Sawing Line – Year 2007 Single Rotating Spindle. 18 metres In- Feed Rollers. 12 metres Out- Feed Rollers. Pincher Unit Feed. Infeed Cross Transfers. Outfeed Cross Transfers. 750mm Capacity. Sawing Capacity: Round cutting capacity(without vertical jaws, angle 0 degrees) 520 mm. Rectangular cutting capacity (without vertical jaw, angle 0 degrees) 700mm X 500 mm. Lhsdpfsig T Amex Amvjh Maximum capacity with vertical jaws 700 X 500 mm. Round cut capacity with 45 degree turn, 450 mm. Rectangular cutting capacity with 45 degree turn, 450 X 500 mm.

Condition: used, Year of construction: 2006, Web height min 80mm. max 1220mm. Flanges height min 42mm.max. 600mm. U channels min. 80mm 1200mm Flanges height min.45mm max 300mm. Angles min. 80x80x8mm max.300x300x50mm Flats min.100mm max.1220mm Square tubes min.80x80mm max.600x600mm Rectangular tubes min. 80x40mm max.1200x600mm Positioning weight max. 15000Kg Linear weight of the section to be handled max. 750Kg/m Ljdpfxox N Icls Amvohh Carriage speed max. 30m/min. No. of drill heads 3 - two horizontal Drill Heads with single spindle - one vertical Drill Head with single spindle Max. drilling diameter 50 mm. - with tapered adaptor No.4 Max. thickness that can be drilled 75 mm. Spindle rotation motor per head (a.c.) 15 kW Spindle R.P.M. (with continuous adjustment by program) RPM 180 - 3000 Positioning stroke to suit the gauge line :- vertical drilling unit 20 to 1200 mm.- horizontal drilling units 10 to 600 mm. TOOL CHANGE - number of tools change devices n. 3 - number of tools to be changed n. 6 - adaptor size ISO 45 Model 1260 BH for sections cold sawing : - sawing capacity at 90° min. 80 x 10 mm - sawing capacity at 90° 1250 x 600 mm - sawing capacity at 45° 800 x 600 mm - sawing capacity at 60° 500 x 500 mm - sawing band motor 11 kW - sawing speed 20÷100 m/min. - band size 67 x 1.6

Condition: excellent (used), Year of construction: 2013, Vernet HD-X 618 / HBP 410/723 G CNC Drilling / Sawing Line – Year 2013. 3 Spindle Drill. 16.5 metres In-Feed. 14 metres Out-Feed. Lhodpfx Amox Rut Tsvsh Pusher Unit Feed. Milling / Slotting. Solid Carbide Tooling. Small parts conveyor. 4 way Scribing. In-Feed Cross Transfers. Out-Feed Cross Transfers.

Year of construction: 2007, condition: excellent (used), 603 LBH Technical Description Main Technical Specifications • Minimum sawing capacity at 90° min.mm 60 x 10 max.mm 610 x 310 • Sawing capacity at 45° mm 400 x 310 • Sawing capacity at 60° (available on two flanges only with relevant option) mm 250 x 250 • Mitering angles +45° / -60° • Toothed band size mm 34 x 1.1 Ledjl Si Uuopfx Amvshh • Toothed band speed m/min. 78 • Band motor power kW 4 • Working level height mm 850

Condition: reconditioned (used), Year of construction: 2007, Operating range VB750 Min. / max. height 10 – 450 mm Lsdpfx Amew Nyu Sovehh Min. / max. width 50 – 750 mm Sawing machine Capacity (h x w) 0° 450 x 750 mm Capacity (h x w) +/- 15° 450 x 700 mm Capacity (h x w) +/- 30° 450 x 620 mm Capacity (h x w) +/- 45° 450 x 480 mm Capacity (h x w) +/- 60° 450 x 300 mm

Condition: good (used), Year of construction: 2016, saw blade diameter: 600 mm, type of input current: three-phase, operating pressure: 8 bar, Industrial aluminum sawing machine that saws automatically, using pneumatic 2-button operation, and where the workpiece is clamped pneumatically on both sides. The clamping is adjustable both horizontally and vertically. Furthermore, this sawing machine is equipped with a mist lubrication system, which improves the sawing process. The saw blade feed is adjustable on this machine. Features: - Automatic sawing motion - Double pneumatic clamping - Saw blade moves from bottom to top Lsdpfx Amozf U Tmjvehh - Solid carbide saw blade - Adjustable sawing speed - Length stop - Lubrication and reduction system - Atomization system - Air gun - Miter sawing - Automatic sawing and manual sawing The machine is installed and delivered assembled. Testing is possible.

Condition: used, Year of construction: 2008, cutting diameter 335 mm saw band length 4400 mm table height 750 mm 500 mm 335 mm 500 x 335 mm re. 330 li. 305 mm cutting speed re. 320x335 li. 305x335 mm down speed re. 180 mm dimensions of saw-band re. 170 x 335 mm workpiece weight 18 - 115 m/min capacity 90 degrees: round 0 - 300 mm/min. capacity 90 degrees: flat 4400 x 34 x 1,1 mm capacity 45 degrees: round max. 250 kg/m 4,0 kW work height max. 2400 kg connected load 3500 x 2350 x 1900 mm Features: - Material bundle clamping - Automatic feed - Laser light for cut line indication - Micro-dosing device - Motorized chip brush - Clamping pressure control on the control panel - Fully automatic sawing process after entering the length and quantity Lhodpfx Aozdu Uzomvsh - Operating instructions

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, Technical data – Elumatec TS 161 Machine type: Table saw Ljdpfx Aszf Rllemvjhh Saw blade diameter: 280 mm Saw blade speed: 3,200 rpm Motor power: 1.1 kW Operating voltage: 400 V / 3~ / 50 Hz Swivel range: 0° to 45° to the left Cutting speed: 3,200 m/min Dimensions (L × W × H): approx. 650 × 750 × 1,300 mm Weight: approx. 96 kg

Condition: good (used), functionality: fully functional, SCM SI12B circular saw Cutting width from the right side: 620 mm Maximum cutting height: 90 mm with a 300 mm saw blade Ljdpjzdriiofx Amvjhh Manual adjustment of the saw blade tilt angle up to 45° Manual raising and lowering of the saw blade Main motor power: 2.2 kW