Used Saw Shaft Construction for sale (27,155)

Condition: good (used), Year of construction: 1992, I sell the automatic optimising saw GreCon Dimter 2004, year 1992. Gedpfxot Ir Nqo Angsuh Input table automatic feeding / throughfeed system Outut table 3 pcs. kickers on left outfeed table Total length: 15,50m Optimising with mistakes deffect reading and automatic cutting sequence modes. Available immediately. Spare parts and Documentation included.

Condition: reconditioned (used), Year of construction: 1998, machine overhauled, major overhaul - year of production 1998 TECHNICAL PARAMETERS: diameter of the main saw ⌀ 350 mm max. sawing height 70 mm max. sawing width 150 mm engine power 3 kW rotational speed of the spindle 4500 rpm diameter of spindle tip ⌀ 30 mm nominal pressure of compressed air 0,6 Mpa frequency of working cycles 0 - 28 cycles/min max. stroke of saw 100 mm connection diameter of suction nozzle 1 x ⌀ 125 mm air demand (in dust extraction system) 1300 m3/h height to table surface 850 mm weight 160 kg The DMDK-35 circular saw is used for transverse sawing of wood. The maximum cutting width is 220 mm with a height of 35 mm. The saw is controlled by a foot switch. Gsdst Dxwaspfx Angeuh The saw guard assembly is equipped with safety curtains. The material is pressed with two point presses. This is an efficient saw, it has an infinitely adjustable feed speed in the range of 0 -28 cycles/min. The saw is often used to manually cut out defects in the material. net price invoice va

Condition: like new (used), Year of construction: 2008, Üstünkarli UDKP 160 Cutting height 160 mm Chain bed approx. 420 mm With spikes in the chain bed Gsdpfx Anoucnudegouh Including slat bush and spacer rings Main engine 75kW

Condition: not inspected (used), Year of construction: 1991, Torwegge multirip saw Chain width 250mm Guedeucnukjpfx Angeh cutting height 100mm Total connection 39kW

Condition: used, Technical details: saw blade diameter: 420 mm cutting lenght max.: 5000 mm cutting range: H x B: 180 x 100 mm air pressure - required: 6 bar mitter cutting - both sides: 45° - 90° (manuell) ° voltage: 380 / 220 V total power requirement: ca. 8,0 kW weight of the machine ca.: auf Anfrage t dimension machine xH: 6,4 x 1,3 x 2,0 m Circular saw with 2x sawhorses for cutting profiles with inclined cuts up to 45°. microprocessor positioning control BECKHOFF E 70-300 with absolute encoder, digital display travel per saw block = 2350mm, motorized Clamping cylinder for each horizontal and vertical, manual Guedpou Nigwofx Angjh flushing device hydropneumatic feed use of carbide saw blades i.D. *

Condition: used, Technical details: Saw blade diameter: 400 mm cutting diameter: 140 mm hole of sawblade: 50 mm saw blade rpm: 6 / 12 / 24 / 48 U/min cutting range 90 degrees: round: Ø 140 mm cutting range 90 degrees: square: 130 x 130 mm cutting range 90 degrees: flat: 370 x 30 / 315 x 70 / 265 x 95 mm Table dimensions: Ø 700 mm table rotating: 360 Grad clamping capacity: 8 - 30 bar electrics - voltage/frequency: 400 / 50 V/Hz air-pressure connection: 6 - 8 bar total power requirement: 3,6 kW weight of the machine approx.: 1170 kg dimensions of machine: T: 1,5 x B: 1,0 x H: 2,35 m SEMI-AUTOMATIC CIRCULAR SAW - PROFILE CIRCULAR SAWING MACHINE Profile circular saw with two-hand control (underfloor saw) for sawing materials: steel as solid material, pipes and profiles, taking into account the cutting area. Cutting speed depends on the material to be sawn Mitre cut 30° to 90° Operation Control panel and two-hand operation Material clamping (opening width) adjustable with return stroke Saw blade feed speed adjustable Gedpfxeu Niuze Angeuh Without coolant system *

Condition: excellent (used), Year of construction: 2016, Cutting Capacity 0° round (tube): 300 mm Cutting Capacity 0° round (solid material): 180 mm Cutting Capacity 0° rectangular horizontal (hollow section): 320 x 290 mm Cutting Capacity 0° bundle (tube): 320 x 160 mm Cutting Capacity -45° round (tube): 300 mm Cutting Capacity -45° round (solid material): 110 mm Cutting Capacity -45° rectangular horizontal (hollow section): 300 x 280 mm Cutting Capacity -60° round (tube): 200 mm Cutting Capacity -60° round (solid material): 80 mm Cutting Capacity -60° rectangular horizontal (hollow section): 190 x 200 mm Cutting Capacity +45° round (tube): 270 mm Cutting Capacity +45° round (solid material): 110 mm Cutting Capacity +45° rectangular horizontal (hollow section): 270 x 200 mm Table height, material feed: 800 mm Main motor: 2.6 kW Cutting speed, stepless: 20 - 100 m/min Saw blade size: 3660 x 27 x 0.9 mm Machine dimensions (L x W x H): approx. 1800 x 950 x 1400 mm Net weight: 585 kg Accessories / Special features: • Semi-automatic swing-frame metal band saw • After the cutting cycle is started, the vice clamps automatically – after completion, it returns to its starting position • For mitre cuts from +60° to -45° with frequency inverter • Suitable for cutting stainless steel, tool steel, hollow profiles, and solid materials • Fully hydraulically controlled sawing functions • Saw drive with low-maintenance, oil-lubricated worm gear • Robust three-phase motor Gedpfx Ansxz Dqmsgsuh • Motor equipped with overload protection • Ball-bearing turntable • Saw arm inclined at 25°, resulting in longer saw blade service life • Saw arm swivels from +60° to -45° • Chip removal brush for optimal saw blade cleaning and maintenance • Frequency inverter: allows stepless adjustment of saw blade speed from 20 - 100 m/min • BRP – Saw band monitoring • Hydraulic vice with manual quick-release for lateral adjustment • Limit switches control upper and lower saw arm positions • No need to set the upper end point • Length stop with scale, left-side removal 3 m • Cut detector • Swivelling control panel • Micro-spray device • 2 x roller conveyors: 3 m discharge left, 6 m feed right • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: excellent (used), functionality: fully functional, Band Saw Brand Kolbe Table dimensions: 1260 mm x 720 mm Overall dimensions: 1620 mm x 720 mm x 1760 mm Gedpfewb U Npsx Angsuh

Condition: excellent (used), Year of construction: 2014, ZIM Hülsta Back Panel Saw Manufacturer: ZIM Hülsta-Werke Designation: Back Panel Saw Year of Manufacture: 2014 Serial Number: 380114008 Description: Movable saw unit 2 movable Benz four-spindle drilling units Suitable for milling and drilling operations Tilting drilling RWH drilling Sawing Gujdpjvdb Tbefx Angeh Sawing and RWH drilling Feed roller table Protective enclosure with Leutze laser barrier system Control cabinet Dust extraction piping Control terminal, consisting of: PC, flat-screen monitor EIZO FlexScan S1911 Keyboard and mouse, hand scanner, terminal cabinet Mobile steel container (beige) Handshake signals between PC and PLC 1. Data handling is performed exclusively by the PC. 2. The clamping system sends a transmission release (VB.SendRelease) to the main PC, which then transmits the head and machining data. 3. The main PC activates a handshake signal (VB.DataSent) when the data has been transmitted. 4. Then, the VB.SendRelease and VB.DataSent signals are deactivated by the clamping system. 5. This procedure is initiated again for each new component. More new and used items can be found in our shop! International shipping costs on request!

Condition: used, Costa multi-blade saw -Type Lince Guodpfxjvw Rplj Angeh -max. cutting height 140mm -motor 30kW

Condition: refurbished (used), Year of construction: 1980, functionality: fully functional, input voltage: 380 V, cutting width (max.): 900 mm, total height: 2,600 mm, total length: 1,700 mm, total width: 1,800 mm, overall weight: 800 kg, saw band length: 4,600 mm, saw band width: 25 mm, table width: 1,800 mm, throat depth: 900 mm, working height: 800 mm, Band saw for cutting wood and other wood-based materials, and more. Cast iron construction. Working wheels 900 mm. Cutting width 900 mm, cutting height 800 mm. Cast iron construction, weight 800 kg. Condition after complete overhaul. Equipped with saw blade. Covers included. Gujdpfx Anexl Svxogeh

Condition: used, Altendorf Wa80 panel saw, Gusdpfx Asyhdb Hjngoh 320cm sliding table on round rods, Main motor 5.5KW, 3 rotation speeds, Scoring unit 0.75KW, 0-45° tilt, electrically adjustable, Saw blade up/down electrically adjustable, Max blade diameter 400mm, Max cutting width at right rip fence 130cm, Machine tested, fully functional.

Condition: like new (used), Year of construction: 2025, machine/vehicle number: 5401502010, functionality: fully functional, operating hours: 105 h, power: 7.5 kW (10.20 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 500 mm, cutting width (max.): 560 mm, control type: CNC control, roller diameter: 550 mm, actuation type: electric, rotational speed (max.): 150 rpm, rotational speed (min.): 15 rpm, total height: 2,522 mm, total length: 4,116 mm, total width: 2,030 mm, overall weight: 3,790 kg, table height: 810 mm, year of last overhaul: 2026, Equipment: CE marking, documentation/manual, lighting, rotational speed infinitely variable, PEGAS 540 CALIBER A-CNC metal-cutting band saw – a fully servo-driven band saw equipped with ball screws for the working movements of the saw arm and the feed mechanism for cut-to-length bar stock. This is a demonstration and exhibition machine from the manufacturer PEGAS-GONDA. The saw was only used at trade fairs and demonstration events between 2024 and 2026. The control system records only 105 operating hours. Gsdpfx Aozkcafjngeuh Key parameters: Automatic CNC metal-cutting band saw Cutting capacity up to Ø 550 mm Automatic material feed SIEMENS S7-1500 control system and complete servo drive for all movements from SIEMENS. Touchscreen control and program storage Smooth belt speed control Robust industrial design for series production The machine is in virtually new condition, fully functional, and ready for immediate use. Original price of a new machine: €85,712 (excluding VAT) Selling price: €35,200 (excluding VAT) Inspection and demonstration are possible at the production facility in Slavkov u Brna by appointment. We can also offer roller conveyors with a load capacity of up to 2000 kg per meter.

Condition: excellent (used), Catalog number: 8056 Gusdpfjznkz Ejx Angoh TECHNICAL DATA - max. blade diameter: 350mm - blade bore diameter: 30mm - blade guard - cutting height for a 300mm blade: 90mm - max. cutting width: 640mm - ability to cut at an angle in the vertical plane, by moving the arm or the blade - arm rotation: right/left - motor: 400V, 3kW - table dimensions: 1000x800mm - dust extraction port diameter: 50mm - dimensions (L/W/H): 1800x1100x1510mm - weight: 185kg ADVANTAGES – Made in Italy – DTR documentation available – Very good condition – Used saw Net price: 7500 PLN Net price: 1744 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)

Condition: as good as new (ex-display), functionality: fully functional, power: 5.5 kW (7.48 HP), input voltage: 400 V, input frequency: 50 Hz, saw blade diameter: 300 mm, saw blade bore: 30 mm, rotational speed (max.): 4,750 rpm, overall weight: 1,100 kg, cutting depth: 80 mm, extraction nozzle diameter: 140 mm, pressure (min.): 6 bar, pressure (max.): 10 bar, section length (max.): 5,300 mm, The STRIEBIG STANDARD TRK 1 6224 is a precise and robust vertical panel saw for professional use. It is ideally suited for cutting wood, plastic, and composite panels. Thanks to its sturdy construction and optional digital measuring systems, it enables efficient and accurate work. The machine offered here is a used machine with only a few operating hours and is in like-new condition. Special equipment: Digital measuring system DMS – X-axis Gedpfx Aozmh E Songeuh Digital measuring system DMS – Y-axis Paper holder Small parts support, aluminum Includes delivery and installation in postal code areas 71, 72, 73, 77, 78, 79, 86, 87, 88, 89.

Condition: excellent (used), CATALOGUE NUMBER 8028 TECHNICAL DATA - Track width 300mm - Roller working width 300mm - Max. blade diameter 350mm - Blade bore diameter 80mm - Max. cutting height 120mm - Table width 750mm - Table length 1540mm * From above: - Kickback pawls (barrier to prevent material from recoiling) - Metal feed roller, pressure roller - Kickback pawls/ratchets - Metal feed roller, pressure roller - Roller with saw blades - 2 smooth metal feed rollers * From below: - Guide rail (pneumatically adjustable) - Kickback pawls/ratchets - Track - Central track lubrication - Smooth feed rate adjustment - Feed motor 1.1kW - Main motor 25kW - Dust extraction nozzle diameter 1x200mm, 1x120mm - Overall dimensions L/W/H 2430x1530x1450mm - Weight 1540kg ADVANTAGES – Made in Italy – Guide rail – pneumatically adjustable – Very good condition – Used multi-blade saw Gusdpfxszmfr Aj Angsh Net price: 38900 PLN Net price: 9047 EUR, depending on the exchange rate of 4.30 EUR (Prices are subject to change due to significant exchange rate fluctuations)

Condition: good (used), Year of construction: 2008, Striebig Panel Saw Compact 5220, Year of Manufacture: 12/2008 Solid, self-supporting, firmly welded saw frame with high torsional rigidity Stable, durable saw beam steel construction Robust mounting of the motor carriage ensures high cutting accuracy Powerful, low-vibration 3.0 kW motor (S1) TRK dust extraction system Automatically adjusting aluminum slat grid with plastic supports Device for wall mounting Ball-bearing support rollers Split center support at optimal working height, with aluminum grid Integrated small parts support made of wood Supersilent sound insulation to reduce saw blade noise Gjdpfszp Nt Ajx Angouh Electromagnetic motor brake Saw weight approx. 910 kg Cutting depth 60 mm Saw motor power 3.9 kW (5.3 HP) Saw blade diameter 250 mm Saw blade bore 30 mm *1 Emission sound pressure level at the workplace LpA 82 dB *2 Saw blade speed 5250 rpm 2 dust extraction ports ø 100 mm Connection value 4.8 kW Mains connection 3 x 400 V / 50 Hz Cutting range: L: 4600; H vertical: 2200 mm, H horizontal: 2100 mm Equipment: - Compact 5220 - Freestanding support, complete Location: Available from warehouse 54634 Bitburg - immediately available -

Condition: good (used), Altendorf WA8 sliding table saw Main motor: 5.5 kW, 3 cutting speeds Scoring saw: 0.75 kW, Gujdpfx Aneznw Dysgeh Table length: 320 cm, Tilt: 0-45 degrees, electrically adjustable Blade height adjustment: electrically adjustable Max. blade diameter: 400 mm, Cutting width on the right side: 1370 mm. Good condition, fully functional.

Condition: excellent (used), functionality: fully functional, Crocodile saw with counterweight Brand Schmid & Wezel Model EFA 62 Gjdpfjwg R Aiex Angeuh Power 600W Pressure 6 bar Cutting length 400mm

Condition: good (used), Year of construction: 2002, Double miter saw, manufactured by elumatec, type: DG79/32, year of manufacture: 2002. Digital display for length. 6-meter machine. Oil-mist lubrication system. Machine documentation available. In good condition. Gusdoz Hmx Ijpfx Angsh Saw blade: 380 mm x 3.6 mm / 3.0 mm x 32 mm. Further details can be found in the data sheets.

Condition: excellent (used), Catalog number 7940 TECHNICAL DATA - max. blade diameter: 500mm - spindle diameter: 30mm - blade guard - hydraulic blade feed Guodpfx Aeztzc Dengoh - cutting height: 140mm - main motor: 4.4kW - table dimensions (length/width): 570x870mm - table height from base: 750mm - roller tables: 2 pcs - infeed roller table: 1170mm - outfeed roller table: 1210mm - sliding roller width: 600mm - overall machine dimensions (without roller tables) (length/width/height): 1040x820x900mm - weight: approximately 570kg ADVANTAGES – German-made – 2 roller tables – pneumatic blade stroke – used saw, in perfect condition Net price: 13900 PLN Net price: 3233 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 8029 TECHNICAL DATA - track width 300mm - working width of the roller 300mm - max. blade diameter 350mm - blade bore diameter 70mm - max. cutting height 120mm - table width with extension 760mm - table length 1540mm * from above: - ejectors (barrier protecting against material kickback) - sliding roller, metal, pressure roller - ejectors/pawls - sliding roller, metal, pressure roller - saw mandrel - 2 smooth, metal sliding rollers * from below: - guide rail - ejectors/pawls - track - central track lubrication - stepless feed speed adjustment - feed motor 1.1kW - main motor 18.5kW - diameter of dust extraction nozzle 180mm - overall dimensions L/W/H 2250x1450x1600mm - weight 1570kg ADVANTAGES - Made in Italy - Very good condition - Used multi-blade saw Net price: 36900 PLN Gedpfxoztv Saj Angsuh Net price: 8581 EUR, depending on the exchange rate of 4.30 EUR (Prices may change due to significant fluctuations)

Condition: used, Weinig OptiCut 260 optimisation cross-cut saw for cutting timber to length and marking defects (using fluorescent chalk). The separate measuring station records the lengths and marked defects. Gsdpfszryupox Angsuh Technical data: - Cutting height: 260 mm - Saw blade diameter: 500 mm - Input length: 400 – 6,300 mm - Input thickness: 12 – 80 mm - Feed rate: max. 250 m/min - Cycle time: approx. 1 sec - Saw motor: 7.5 kW - Marking station: 5,000 mm - Outfeed conveyor: 7.5 m with 1 pneumatic ejector - Control system: OptiCom Pro

Condition: excellent (used), CATALOGUE NUMBER: 7480 Technical data: - track width: 360mm - roller width: 350mm - max. disc diameter: 350mm - disc bore diameter: 80mm - max. cutting height: 120mm - table dimensions: 2040x1220mm From above: - pawls - toothed feed roller - pawls - saw mandrel - sliding, pressure roller From below: - rollers in front of the table, 2 pcs - guide - pawls - track - central track lubrication - electric saw mandrel lifting - electric body lifting - stepless feed speed adjustment - extraction nozzle diameter: 140mm, 160mm - main motor: 30kW - overall dimensions (L/W/H): 2600x2300x1850mm - weight: approximately 4000kg Gusdozulzmjpfx Angsh ADVANTAGES - Czech production - used multi-blade saw - very good condition Net price: 30900 PLN Net price: 7186 EUR, depending on an exchange rate of 4.30 EUR (Prices are subject to change due to significant fluctuations)

Condition: excellent (used), CATALOGUE NUMBER 7901 Technical specifications: - track width 300mm - working width of the roller 300mm - max. disc diameter 350mm - disc bore diameter 70mm - max. cutting height 120mm - table width with extension 750mm - table length 1530mm Gsdpfx Ajzul Akjngouh - from above: - ejectors (barrier to prevent material from moving backward) - sliding roller, metal - ejectors - sliding roller, metal - roller with saw blades - 2 smooth sliding rollers, metal - from below: - guide strip - ejectors - track - central track lubrication - stepless feed speed adjustment - feed motor 1.5kW - main motor 22kW - brake - diameter of the dust extraction nozzle 200mm - overall dimensions L/W/H 2300x1370x1570mm - weight approximately 1700kg ADVANTAGES - Made in Italy - Very good condition - DTR documentation - Used multi-blade saw Net price: 32900 PLN Net price: 7651 EUR, depending on the exchange rate of 4.30 EUR (Prices may vary due to significant fluctuations)