Multi blade saw

Üstünkarli UDKP 160

Condition: used, Number of boring spindles 5 St. Working width 230 mm Working height 160 mm Lredpfx Aasrmvhfjgjh

Year of construction: 2011, condition: like new (used), For sale is 1 roller conveyor incl. one geared motor each: Technical data: Year of construction: 2011 Length: 12,75m Width: 1.40m Height: 1.00m Loading: 4 tons possible Gear motor per roller conveyor: SEW-EURODRIVE R87 DREE90L4 (for further details see picture on the type plate) Three of the four roller conveyors have a wooden wall on one side over the entire length and one roller conveyor has a side wooden wall with a length of 5.20! Lrjdpeihpn Njfx Aagsh Two of the four roller conveyors are each equipped with 3 lateral removal systems. (see pictures)

Condition: refurbished (used), Complete Cutting Machine Group from LINCK: 1.Pre-cut feed table Linck EV20 (condition:good) 2.Chipper canter LinckV18 (condition: good) 5.Boad separator unit Linck SE (condition: refurbished) Lsdpfx Asrvh Tmeagjrh 1. EV20- Pre-cut feed table Linck EV20 for smaller logs. Hydraulic unit is included. 2. Chipper canter LinckV18. 2x85 KW motor with direct drive. Completely refurbished set. We can also offer full electrical installation and assembly of line on site.

Condition: good (used), Year of construction: 2007, Technical characteristics : - Max machinable length 3200 mm - Minimum machinable length 200 mm - Maximum width 200 mm - Minimum width 40 mm - Maximum workpiece height 130 mm - Depth with max Ø to tenon 320 mm: 105 mm - Tenoning carriage speed min / max 0/100 m / min - Min / max profiling speed: 3/15 m / min Tenoning: 1- end cut saw 5.5 hp (4 kW) Saw Ø 400 mm 2- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard 3- tenoning router Counter bearing 50 x 620 mm 15 hp (11.3 kW) Max tool Ø 320 mm Axle stroke 575 mm Automatic splinter guard Vertical positioning with continuous axis 4- Digital angular adjustment clamp Profiling: Lodpfx Aaet R T Hcegerh 5-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tools 130/240 mm Axle stroke 280 mm Time-delayed anti-shattering intervention during calibration Double direction of rotation Vertical and horizontal positioning with continuous axis 6-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Axle stroke 280 mm Vertical and horizontal positioning with continuous axis 7-: router to be profiled on the right Shaft 50 x 320 mm 10 hp (7.5 kW) Ø tool 130/240 mm Vertical and horizontal positioning with continuous axis 8-: close-out recovery group Vertical and horizontal positioning with continuous axis Device for extracting the shutter 9-: lower horizontal shaft for groove Vertical and horizontal positioning with continuous axis 88.5 hp (66.4kW) 10-: digital guide 11-: Return of parts to the operator NO TOOLS AVAILABLE OBTAIN ADDITIONAL PHOTOS NOTE: SUBJECT TO CHANGES IN TECHNICAL DATA

Condition: excellent (used), Stehle S820 (automatic straight knife grinder). Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!! Specification: • Maximum tool width 330 mm • Tool diameter planer heads (min-max knife heads) 120 - 230 mm • Grinding wheel speed 2850 / 5750 rpm • Possible to grind from 2 to 12 knives per head with index plate • Index plates included for 4,6,8,10 and 12 knife grinding. • Grinding wheel drive 1,3 kW • Clearance angle 10 - 35° • Coolant tank 125 L • Motor coolant pump 0,28 kW • Connection values, total 2 kW Lrsdjq Dzkuepfx Aagsh Please check in your junk mail if you do not receive a reply within 24hrs from sending your inquiry !!!

Condition: used, Year of construction: 2002, operating hours: 37,000 h, machine/vehicle number: 1651, arm reach: 15,200 mm, load capacity: 1,900 kg, track width: 3,000 mm, Equipment: cabin, crane, Year of manufacture: 2002 Machine number: 1651 Track, m: 3.0 Crane type: OBX II (year of manufacture 1997) Lrsdpfx Aajv Hwk Ujgjh Reach: 15.2 m Load capacity without grab: 1,900 kg / 15.0 m Grapple: included Crane arrangement: behind the cabin Cab side: middle !! Sold on behalf of the customer!!

Condition: good (used), The debarker is great for debarking hardwood as well as softwood. Carriage made of heavy steel construction 5 pairs of drive wheels Milling arm made of heavy steel construction Hydraulic milling head Lrsdpfstuyr Iox Aagjh 22 kW motor Log feeder shown in the picture is not part of the ad and is available for an extra charge of 25,000 PLN / 5,500 EUR

Condition: repair required (used), Year of construction: 1999, functionality: not functional, Prismatrice Storti 4x35hp roller input Lsdpfslxqk Rjx Aagsrh Exit command house machinery to restore

Condition: new, Year of construction: 2025, Roller diameter: 640 mm Stand projection: 620 mm cutting depth: 400mm table tiltable: yes -0 to + 15° Table size: 870 x 620 mm Lodpfx Aaegtdpmjgerh belt speed: 1660m/min Motor power: 2,2 kW / 400V Motor brake: yes / automatic Suction connection: 2 x 120mm Machine length: 1190 mm Machine width: 780 mm Machine height: 2063 mm Weight: 320 kg

Condition: used, x-travel 6500/13150 mm y-travel 4000 mm z-travel 1250 mm w-travel 2250 mm control Sinumerik 840 D table surface area 5500/12150 x 3000 mm distance between columns 3500 mm max. distance between table and spindle-nose 3000 mm max. workpiece weight 70000 / 105000 kg ram head dimension 480 x 510 mm spindle turning speed - stepless 6,3 - 4000 U/min milling spindle motor 63 kW Ledpfx Aaswa Dx Regerh max. torque on the spindle 3300 Nm tool taper DIN 39871 AD ISO 50 feed speeds X/Y/Z= 24000 mm/min total power requirement 120 kVA weight of the machine ca. 245 t dimensions of the machine ca. 29 x 7,7 x 8,1 m The Machine is in almost new condition - in 2020, it was completely retrofit and modernized for 1.6 million Euro! Equipment/accessories: - automatic tool magazine for 153 tools - automatic milling head magazine for 6 milling heads - machining modules/ milling heads: 1. machining module -straight - straight long - 2. machining module -standard angle - 4000 rpm, 144 x 2.5°, ISO 50 3. machining module -narrow angle extended -40 kW, 4000 rpm, 1800 Nm, 144 x 2.5°, ISO 50 4. machining module -universal index - 40 kW, 4000 rpm, 2100 Nm, - C-axis 144 x 2.5° , B-axis +/- 44 x 2.5°, ISO 50 - coolant unit - chip conveyor - technical documentation