Used Saw Formatting for sale (7,733)

Condition: used, Year of construction: 1991, cutting diameter 320 mm dimensions of saw-band 4150x27x0,9 mm total power requirement 1,8 kW weight of the machine ca. 500 kg dimensions of the machine ca. 1600x1700x2000 mm Godpfx Abjy Ruvhs Dsit

Condition: used, Year of construction: 2017, capacity 90 degrees: round 120 mm capacity 90 degrees: square 105 mm capacity 90 degrees: flat 180x70 mm 110 mm 95 mm 135x60 mm 120 mm 100 mm 135x60 mm 180 mm dimensions of saw-blade 350x32x3,4 mm turning speeds 1700/3400 U/min Gijdpfjy Ruvbex Ab Djt weight of the machine ca. 600 kg

Condition: excellent (used), CATALOG NUMBER 7890 Technical specifications: - Track width: 245 mm - Shaft width for edger: 380 mm - Shaft width for multi-blade saw: 320 mm - Max. blade diameter: 350 mm - Blade bore diameter for edger: 80 mm - Blade bore diameter for multi-blade saw: 65 mm - Max. cutting height: 120 mm - Table width (clearance): 900 mm - Table length: 1,780 mm Gedpfey Rtbiox Ab Doit Top components: - Pawls/kickback devices - Smooth pressure roller - Pawls - Smooth pressure roller - Short element insert - Shaft with saw blades - 2 smooth pressure rollers Bottom components: - Guide - Pawls/kickback devices - Track - Centralized lubrication - Laser - Stepless feed speed adjustment - Feed motor: 1.1 kW - Main motor: 30 kW - Manual body height adjustment - Manual saw shaft adjustment - Extraction outlet diameter: 210 mm - Overall dimensions (L x W x H): 1900 x 1500 x 1800 mm - Approximate weight: 2,000 kg ADVANTAGES – Made in Germany – Stepless feed speed adjustment – Shaft with floating blade for edging – Sleeve for multi-blade saw included – Laser – Short element insert – Used multi-blade saw, in very good condition Net price: PLN 55,900 Net price: EUR 13,300 (based on exchange rate of 4.2 EUR/PLN) (Prices are subject to change depending on exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER: 6911 TECHNICAL DATA - Track width: 350 mm - Shaft width: 370 mm - Max cutting height: 200 mm Maximum saw blade diameter: - Upper shaft: 340 mm - Lower shaft: 300 mm - Blade bore diameter: 80 mm From above: - Kickback guards - 2 pressure slip shafts - Pressure unit - Saw shaft 37 kW - 2 smooth slip shafts From below: - Infeed table + guide rail - Kickback guards - Crawler track - Saw shaft 37 kW - Crawler track - 1 outfeed shaft, slip, smooth - Pneumatically pressed rollers - Maximum saw blade diameter: 300 mm - Electric lifting of upper body up/down 1.1 kW - Automatic central lubrication - Electrically controlled stepless feed speed adjustment 3 kW - Extraction nozzle diameter: 230 mm, 250 mm - Dimensions (LxWxH): 3000x2300x1900 mm - Weight: approx. 4500 kg ADVANTAGES – Italian production – Twin-shaft – Used multi-blade saw – very good condition Net price: PLN 168,900 Net price: EUR 40,200 Net price calculated at an exchange rate of 4.2 PLN/EUR Giodpfx Asy Rtaxsb Dot (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOG NUMBER 7751 TECHNICAL DATA - Track width: 250mm - Working width of roller: 250mm - Max blade diameter: 300mm - Blade bore diameter: 60mm - Max cutting height: 100mm - Table width with extension: 520mm - Table length: 1580mm *from above: - pawls: 2 rows - metal pressure slip roller - shaft with saw blades Gsdpfoy Rr Uuox Ab Deit - smooth metal slip roller *from below: - slip roller - guide rail - pawls - track - central track lubrication - stepless feed speed adjustment - feed motor: 0.75kW - main motor: 15kW - extraction port diameter: 200mm - overall dimensions L/W/H: 1640x1400x1550mm - weight: 1000kg ADVANTAGES – Italian manufacture – in very good condition – used multi-blade saw Net price: 32,900 PLN Net price: 7,830 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (if there are significant exchange rate fluctuations, the price may change)

Condition: excellent (used), Year of construction: 2007, FOD BYDGOSZCZ Shaft Multi-Rip Saw* DPPD III 50E 530/150 Catalogue number: 7405 TECHNICAL DATA - Maximum cutting height: 150 mm - Maximum element width: 700 mm - Working width of arbor with saw blades: 530 mm - Maximum blade diameter: 450 mm (currently fitted: 350 mm) - Blade bore diameter: 90 mm From above: - Kickback pawls - 2 toothed feed rollers From below: - 2 smooth feed rollers - Arbor with saw blades - Smooth feed roller - 4 feed speed options - Feed motor approx. 2 kW - Main motor 30 kW Gjdpsy Rrywefx Ab Dsit - Machine dimensions (L/W/H): 2400x1700x1900 mm - Weight approx. 3000 kg – Made in Poland – Used machine, condition: very good Net price: 38,900 PLN Net price: 9,260 EUR (calculated at an exchange rate of 4.2 EUR) (Prices may change in case of substantial exchange rate fluctuations) * MAR-MASZ guarantees the quality of your purchase, but is not an authorized representative of the manufacturer. All trademarks and trade names are used solely for informational purposes to facilitate identification of the product. We only resell items that were previously put on the market by the manufacturer. We do not have any business relations with the manufacturer.

Condition: excellent (used), Year of construction: 2004, CATALOG NUMBER 7880 Technical data: - max cutting height: 150mm - max element width: 500mm - working width of shaft with saws: 400mm - shaft diameter: 70mm - max saw blade diameter: 450mm - from above: - anti-kickback devices - 2 toothed feed rollers – pneumatically pressed - from below: - slip roller - anti-kickback devices - 2 toothed feed rollers - saw shaft - 2 toothed feed rollers - stepless feed speed adjustment via inverter - feed motor: 3kW - main motor: 55kW - overall dimensions L/W/H: 2120x1600x1630mm - weight approx. 2750kg ADVANTAGES – Polish-made – robust construction – Used machine, in very good condition Gsdpoy Rrpxsfx Ab Doit Net price: 55,900 PLN Net price: 13,310 EUR at 4.20 EUR exchange rate (Prices may vary with greater exchange rate fluctuations)

Condition: excellent (used), Catalogue number 7878 TECHNICAL DATA - track width: 220 mm - shaft width: 200 mm - max saw blade diameter: 350 mm - saw blade bore diameter: 70 mm - max cutting height: 120 mm - table width with clearance: 1100 mm - table length: 1640 mm - from above: - row of pawls/kickers Giodjy Rrhzepfx Ab Djt - 1 metal pressure feed roller - pawls - metal pressure feed roller - shaft with saws - 2 metal pressure feed rollers - from below: - guide - pawls/kickers - track - stepless feed speed adjustment with inverter - feed motor: 1.1 kW - main motor: 29 kW - central lubrication of the track - extraction port diameter: 180 mm - overall dimensions (LxWxH): 2000x1600x1500 mm - weight: 1480 kg ADVANTAGES – Italian manufacture – used multi-blade saw – very good condition Net price: 27,900 PLN Net price: 6,643 EUR based on 4.20 EUR exchange rate (Prices may change depending on exchange rate fluctuations)

Condition: excellent (used), Catalogue number: 7545 TECHNICAL DATA Track width: 250mm Shaft width: 220mm Max blade diameter: 300mm Blade bore diameter: 60mm Cutting height: 100mm Table width: 650mm Table length: 1460mm – Top: 2 rows of pawls Smooth feed roller Blade shaft Smooth feed roller – Bottom: Guide rail Pawls Giodpsy Rrhbofx Ab Det Track 2 feed speed settings + stepless adjustment Central lubrication Feed motor: 1.2kW Main motor: 21kW Extraction outlet diameter: 180mm Overall dimensions (L/W/H): 1700x1450x1500mm Weight: approx. 1800kg – Made in Italy – DTR technical documentation – Robust machine – Used multi-blade saw, in very good condition Net price: 25,900 PLN Net price: 6,160 EUR depending on exchange rate 4.2 EUR (Prices may vary with significant fluctuations)

Condition: excellent (used), Catalogue number: 7866 TECHNICAL DATA - Max. blade diameter: 300mm - Blade bore diameter: 30mm - Blade guard - Cutting height with installed blade: 250mm, 60mm - Max. cutting width: 600mm - Ability to cut at an angle in the vertical plane – arm or blade movement - Arm rotation left/right - Motor: 3kW - Table size: 1130x1010mm - Extraction port diameter: 50mm - Dimensions (LxWxH): 1150x1190x1510mm - Weight: 220kg ADVANTAGES – Italian-made – Not repainted – DTR technical documentation – Very good condition – Used saw Net price: 6,500 PLN Gjdpfoy Rrgwsx Ab Deit Net price: 1,550 EUR (based on an exchange rate of 4.2 PLN/EUR) (Prices may change subject to exchange rate fluctuations)

Condition: excellent (used), For sale: Bandsaw as shown in the photos, manufactured by the Czech company Pilous, model ARG 330 Plus SAF. The machine is in very good condition and ready for operation. Loading of the machine is provided. Cutting range: Round material: Ø330 Square material: 320 Rectangular material: 400x200 Band speed: 15-90 Swivel arm: +-60° Gisdpfsy Rqr Sjx Ab Det Weight: 880 kg Dimensions: 2303x1406x1660 mm

Condition: used, Year of construction: 2014, Technical Description: Cutting Height: Vertical: 2,150 mm, Horizontal: 50–2,000 mm Cutting Length: 4,300 mm Cutting Depth: 80 mm (with clamps: 55 mm) Saw Blade Protrusion Behind Workpiece: approx. 15 mm Saw Blade: Diameter 303 mm, Bore 30 mm, Z=60 Alternate Top Bevel Saw Blade Rotation: 4,200 rpm Motor Power: 4 kW (5.5 HP) Required Air Pressure: 6 bar Material Support Rollers: 20 ball-bearing rollers + 2 infeed/outfeed rollers Panel Locking for horizontal cuts via pneumatic workpiece clamping system, controlled by a switch on the operator panel. Middle Support: 3 support elements for 3 m support, foldable individually by hand. Dimension Readout for: - Horizontal Cuts: by digital readout with zero reset (for strip cutting from top to bottom), by scale from 0–2,100 mm, and by strip stop from 75–730 mm - Vertical Cuts: by electronic digital display and scale from 0–1,300 mm Gsdpfxoy Rphxj Ab Dsit Extraction Nozzles: 100 mm for the saw unit and 120 mm for the rear extraction ducts, positioned on the right side of the machine frame. Equipment Features: - ADVANCE clamping system, consisting of 2 pneumatic clamping jaws motor-driven on ball screw along vertical axes. The clamping jaws can be positioned to the upper edge of the panel via joystick. The jaws automatically detect and stop at the panel’s upper edge using a contact switch. After reaching, the jaws close and secure the panel. They support panels up to max. 150 kg. The jaws can lift the panel for lower edge trimming, then relocate it with the trimmed edge resting on the lower support (also detected by contact switch). The jaws can then be raised again or continue holding the panel during horizontal cutting to relieve the cut. This prevents the panel from dropping onto the saw blade after the horizontal cut! Standard distance between clamps is approx. 1,800 mm. Position: right side of the machine (other positions available at extra cost). Minimum strip height with Advance jaws: 400 mm. - Electropneumatic scoring system for chip-free saw cuts by double cutting with the main blade (no scoring width adjustment needed – always ready to use – user-friendly) - Torsion-resistant, freestanding machine frame. - Round rod guide for vertical and horizontal travel. - Pneumatically retractable slatted panel prevents contact between saw blade and rear wall slats (strip). A sensor detects slat position; the grid recoils pneumatically if the saw would hit a slat. - Extraction nozzle on the saw head for dust collection in front of the workpiece. - Extraction nozzles for 3 vertical extraction ducts for dust generated behind the workpiece. - Fine-adjustable flip stop for vertical cuts, guided on a 30 mm round bar. - Extension stop (eliminating the need to lift heavy panels from the lower rollers onto the middle support). - Fine adjustment for horizontal cuts via handwheel. - Foldable strip cutting stop with ball bearing sensor along upper panel edge, adjustable from 75–730 mm.

Condition: used, Technical details: dimensions of saw-band: 5750 mm throat: 605 mm workpiece height: 460 mm max. table load: 250 kg table - inclinable: 15 -30 Grad band speed: 27 - 2200 m/min Gijdpfjy Rm T Ejx Ab Dst table height: 1125 mm Table dimensions: 740 x 785 mm motor capacity: 5,5 kW machine weight approx.: 1750 kg dimension machine xH: 1,82 x 0,97 x 2,55 m

Condition: good (used), Year of construction: 1988, functionality: fully functional, Double mitre saw DG79 - 2 x 2 kW - 380 Volt - Year of manufacture: 1988 - 2100 / 3800 rpm Gjdpfx Aeygm Akeb Djit - Saw blade 330 mm Ø - Cutting area at 90°: 195 x 90 mm; at 45°: 135 x 90 mm - Minimum cutting length 500 mm, maximum approx. 3300 mm - Compressed air 6-8 bar / 250 l/min - Weight: approx. 500 kg - Pneumatic clamping device Transport available at extra cost! Due to the age of the used machine, warranty is excluded for commercial customers.

Condition: used, functionality: fully functional, saw blade diameter: 350 mm, total length: 2,720 mm, total height: 1,740 mm, total width: 1,460 mm, overall weight: 560 kg, Automatic Metal Circular Saw MEP COBRA AX • Cutting angles: 90°, 45° left, 45° right • Cutting capacity (90°, round tube): 105 mm • Cutting capacity (90°, rectangular tube): 180×70 mm • Cutting capacity (45°, round tube): 105 mm • Cutting capacity (45°, square tube): 95 mm • Cutting capacity (45°, rectangular tube): 135×60 mm • Saw blade diameter: 350 mm • Saw blade bore: 32 mm • Automatic lubrication • Operation modes: manual or automatic • Pneumatic material feed • Total power requirement: 2.29 kW • Dimensions (L x W x H): approx. 2720 x 1460 x 1740 mm • Machine weight: approx. 560 kg Description: Gedpfx Aoy Rmcasb Doit For sale is a bandsaw / metal bandsaw in good used condition. The machine operates flawlessly and is ready for immediate use. Upon request, we can provide a video demonstrating the machine in operation. Location: D-89350 Dürrlauingen Price: €1,450 EXW The saw is sold under the margin scheme according to § 25a UStG – therefore, VAT will not be shown separately. Delivery can be arranged within a radius of up to 400 km by agreement. If you are interested or have any questions, please feel free to get in touch. Viewing by appointment is possible.

Year of construction: 2026, condition: new, Wravor 20-160 – robust and reliable industrial circular - edger and multirip saw in one machine, designed for professional primary board processing. The machine is suitable for accurate and high-capacity edging and ripping of boards and cants in demanding industrial production. Technical data: - main motor: 30 / 37 / 45 / 55 / 75 kW - cutting thickness: 20 – 160 mm - max cutting width: 900 / 1000 / 1250 mm - number of movable blades: 1-4 (hydraulic or servo drive system for precise and flexible cutting adjustment) - computer setting of cutting width - heavy-duty and stable construction, - high cutting precision, - excellent productivity, Gisdpfx Abjy Rku Ho Dst - reliable operation for continuous industrial use, - different options for mechanisation (mechanic or automatic conveyors) The machine can operate independently or as part of a complete sawmill line with automatic transport systems.

Condition: good (used), Year of construction: 2012, Used Bomar bandsaw with dual column system Model: Individual 620.460 DGH Giedpfxoy Rktio Ab Djt Capacity: 620 x 460 mm Double mitre Year of manufacture: 2012 Includes 6 meter infeed conveyor + 6 meter outfeed roller conveyor with measuring system

Condition: new, Band saw machine Make: METALLKRAFT Model: BMBS 230 x 280 H-DG Art.no.: 3680013 Condition: New machine Cutting range (round): 230 mm cutting speed: 35/70 m/min standard equipped with: Giodscuntzjpfx Ab Det - horizontal vice - length stop (600 mm) - Monitoring of saw band tension, electromechanical - chip clearing brush - coolant device - operating instructions

Condition: new, 2-column automatic bandsaw Manufacturer: METALLKRAFT Model: HMBS 340 CNC CALIBER Item no. 3693090 Cutting range, round: 340 mm Gisdpfx Abeyzqwpo Det Saw blade dimensions: 4,600 x 34 x 1.1 mm Standard equipment includes: - Band tension monitoring - Hydraulic saw feed - Feed monitoring - Powered chip removal brush - Swivelling control panel - Chip conveyor - Chip container - LED machine light - Coolant system - Operating manual

Condition: new, Vertical band saw machine Make: METALLKRAFT Model: VMBS 1610 Article no. 3951610 Condition: New machine Gedpshy Tcqsfx Ab Dsit cutting speed 20 - 1000 m/min Accessories: - Belt welding machine with shear and grinding motor - machine light - 2-speed gearbox infinitely variable - chip blowing device - rip fence - instruction manual

Year of construction: 2020, condition: as good as new (ex-display), Band saw machine Make: KASTO Model: micut P 2.6 Year of manufacture: 2020 - Demonstration machine Machine No.: 6151 101 006 with warranty standard equipped with: - infinitely variable cutting speed 20 - 110 m/min - horizontal vice, manual clamping - Infinitely variable miter adjustment (-45° to +60°) - Infinitely variable saw band arm adjustment - Adjustable saw feed via own weight - Cutting bar as material support - Automatic switch-off after end of cut Gjdpfx Ajdur E Ajb Djit - Coolant system - Operating instructions with the following options: - Drip oiler

Condition: new, Band saw machine Make: OPTIMUM Model: S 275 NV Art.Nr.: 3300265 Gisdpfedynpcsx Ab Det Condition: new machine Section (round): 225 mm Cutting speed: 20-90 m / min equipped as standard with: -Horizontal vise -Back fence - automatic shut-off after the end of the cut -Späneräumbürste -Coolant system -Manual

Condition: new, Year of construction: 2024, Underfloor light metal circular saw Make: METALLKRAFT Model: ULMS 420 Item no.: 3627420 Condition: New machine Cutting area (square): 120 x 120 mm Speed: 2900 rpm equipped as standard with: Giedpfx Aetuch Esb Djt - Saw blade 420 x 30 x 4.0 mm Z 120 - minimum quantity lubrication system - Compressed air gun and spiral hose - Two extraction sockets for connection to an extraction system - Operating instructions

Condition: used, Year of construction: 2014, Vertical band saw machine Brand: JAESPA Model: MSU 4 Machine No. 23690.14 – workshop tested Year of manufacture: 2014 Gijdpjy E Iwusfx Ab Dot Infinitely variable band speed from approx. 16 to 2,200 m/min Saw band length: 3,450 – 3,640 mm Saw band width: up to max 20 mm Accessories: - IDEAL band welding unit with electronic annealing current regulation with shear and grinding motor - Chip blow-out device with stepless adjustment - Brass chip cleaning brush new and included as spare - CE conformity declaration - Operating manual Safety equipment: - Main emergency stop switch - Emergency stop switch - Band wheel doors electrically secured - Saw blade guard - Limit switch for saw band breakage Used as seen, without warranty The machine technically conforms to current safety regulations.

Condition: new, Band saw machine Make: METALLKRAFT Model: BMBS 300 x 320 HA-DG Art.no.: 3690041 Condition: New machine cutting range (round): 300 mm belt speed: 20-100 m/min, infinitely variable standard equipped with: - Fully hydraulic, semi-automatic version. after starting, the machine clamps automatically after the end of the cut, it returns to the starting position stops the saw band and opens the vice. - Cutting probe for automatic detection of material height - Horizontal vice, mechanical, hydraulic - Monitoring of saw band tension, electromechanical - Chip clearing brush - Measuring stop with scale 1.000 mm - coolant device - Operating instructions Giodpfx Asilg Hdeb Dst