Used Sanding Drum for sale (4,322)

Condition: used, color: yellow, Year of construction: 2021, operating hours: 3,680 h, Year of manufacture: 2021 Empty weight: 16.000 kg Csdsx Sqhiepfx Akcjrb Dimensions (LxBxH): 622 x 230 x 299 cm Engine type: Deutz DEUTZ TCD4.1 L-4

Condition: like new (used), Year of construction: 2020, operating hours: 1,647 h, load capacity: 3,500 kg, lifting height: 220 mm, fuel type: electric, mast type: simplex, Manufacturer + model: JUNGHEINRICH EJK 335 Drum forks / Spreader!!! ID: 26062.6948 Csdpfx Aoy Itqlokcjrb Category: Used Mast: 1F220 Forks: 1150 mm Capacity: 3500 kg Year: 2020 Hours: 1649 hours Battery: 24v / 375Ah Options: SPECIAL build!!! Drum roll / Spreader - forks!!! Distance between support legs: 1400 mm Truck width over support legs: 1740 mm Power steering

Condition: new, Year of construction: 2014, operating hours: 46 h, load capacity: 300 kg, lifting height: 1,850 mm, fuel type: electric, mast type: duplex, construction height: 1,500 mm, Manufacturer + model LINDE L 16 (372) Mast 2W1850 + KAUP / Drum clamp ID 23032.5921 Mast 2W1850 Lowered height 1500 mm Lifting height 1850 mm Year 2014 Operating hours 46 Capacity 24 V / 345 Ah Options: Equipped with free-carrying -> Drum clamp KAUP 0.8 R405 Crodpfx Ajy Ir R Dekcsb Drum clamp range = 450 to 850 mm

Condition: excellent (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 10/2017, total length: 9,680 mm, total width: 2,550 mm, total height: 1,350 mm, suspension: air, tire size: 385/65-R22.5, wheelbase: 7,790 mm, Year of construction: 2017, Equipment: ABS, = Additional options and equipment = - ADR - BPW axles - EBS - Alloy wheels - Drum brakes = Notes = Very nice 10/2017 LAG 20FT/30FT ADR chassis with ABS/EBS, ADR approval (EX/II, EX/III, FL, AT) valid until 24/10/2026, BPW axles with drum brakes, ALCOA rims, unladen weight: 3,820 kg, gross vehicle weight: 39,000 kg, tires: 385/65-R22.5 (tread left: 16/6/16 mm; tread right: 16/8/13 mm), Dutch registration with valid MOT (APK) until 12/11/2026 = Further information = Axle configuration Tire size: 385/65-R22.5 Axle brand: BPW DRUM Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Alloy wheels; Max. axle load: 9,000 kg; Tire tread left: 100%; Tire tread right: 100% Rear axle 2: Alloy wheels; Max. axle load: 9,000 kg; Tire tread left: 40%; Tire tread right: 50% Rear axle 3: Alloy wheels; Max. axle load: 9,000 kg; Tire tread left: 100%; Tire tread right: 80% Csdpjy In Ufsfx Akcjrb Weights Unladen weight: 3,820 kg Payload: 35,180 kg Gross vehicle weight: 39,000 kg Functional Body manufacturer: LAG O-3-CC Maintenance, history, and condition MOT (main inspection): tested until 11/2026 Technical condition: very good Visual condition: very good Identification License plate: OP-55-ZG

Condition: used, axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 09/2011, total length: 13,860 mm, total width: 2,550 mm, total height: 4,000 mm, suspension: air, tire size: 385 / 65 / R22.5, wheelbase: 9,110 mm, color: blue, Year of construction: 2011, Axle configuration Tyre size: 385 / 65 / R22.5 Make axles: BPW Brakes: drum brakes Credey Ig Ahopfx Akcjb Suspension: air suspension Rear axle 1: Max. axle load: 9000 kg; Tyre profile left: 40%; Tyre profile right: 40% Rear axle 2: Max. axle load: 9000 kg; Tyre profile left: 40%; Tyre profile right: 40% Rear axle 3: Max. axle load: 9000 kg; Tyre profile left: 40%; Tyre profile right: 40% Weights Empty weight: 7.270 kg Carrying capacity: 33.730 kg GVW: 41.000 kg Maintenance APK (MOT): tested until 03/2027 Condition General condition: average Technical condition: average Visual appearance: average Product safety Manufacturer: Kuijpers Trading BV Minosstraat 8 5048CK TILBURG, NL

Condition: good (used), axle configuration: 3 axles, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,000 kg, first registration: 01/1994, loading space length: 13,620 mm, loading space width: 2,510 mm, loading space height: 2,530 mm, total width: 2,500 mm, suspension: air, tire size: 385/65R22.5, wheelbase: 9,130 mm, color: red, Year of construction: 1994, Equipment: ABS, Axle configuration Tyre size: 385/65R22.5 Make axles: BPW Brakes: drum brakes Rear axle 1: Max. axle load: 9000 kg Cjdpfey Igl Asx Akcjrb Rear axle 2: Max. axle load: 9000 kg Rear axle 3: Max. axle load: 9000 kg Weights Empty weight: 9.660 kg Carrying capacity: 29.340 kg GVW: 39.000 kg Condition Technical condition: good Visual appearance: good Identification Registration number: OD-98-GK = Additional options and accessories = - Air suspension - Lift axle - Rear doors

Condition: used, Dimensions (l x w x h) approx.: 3200 x 1800 x 1600 mm Weight approx.: 500 kg 3 spindles, 1 milling spindle, 2 - 3 grinding and milling spindles, feeder belt approx. 100 mm wide, Csdpexrlgwjfx Akcsrb total working length approx. 3000 mm, extendable workpiece support

Condition: excellent (used), ITALMECCANICA PROFILWOOD MAK6B Automatic Grinder / Sanding machine 6 sanding units, each 1.5 kW, Cedpfx Aodykwlokcorb max. working width 250 mm, Depth 0-250 mm, min. Dimensions in mm: approx. 4700 x 2000 x 2300, Weight in kg: approx. 3000, (Makor, Delle Vedove, Venjakob, Flader)

Condition: good (used), Year of construction: 2001, Loader with 3 units for: 1) left -> end cut with 1 saw blade 2) right –> milling or drilling 3) left and right –> sanding piece heads with continuous abrasive belt and profiled pads Sanding machine with - No. 2 upper horizontal sanding belts - No. 2 lower horizontal sanding belts - No. 2 right vertical sanding belts - No. 2 left vertical sanding belts - No. 2 orbital sanders - No. 2 Camam robots mod. NTTR for handling pieces - No. 2 Camam brushing heads mod. SAW 91 - Return connection belts to the operator - With cabin - CE norms Crodpfovxqh Dex Akcob Technical characteristics: • maximum length of pieces to be sanded 1,200 mm • Minimum length 380 mm (350 mm without orbital sanding) • Abrasive belt dimensions: 3,700 x 90 mm • Maximum curvature of pieces 120 mm

Condition: excellent (used), functionality: fully functional, CALIBRATING SANDING machine model DMC TECHNOSAND TC 1350 RRP second hand machine CE standard : YES machine composed by 3 belts ( 3 independent motors ) 1° belt : Roller 2° belt : Roller 3° belt : electronic Sectioned Pad Crsdpjyrrr Usfx Akcjb vacuum unit for table maximum working width mm. 1350 volt. 380/50

Condition: new, Number of sanding units 8 st. sanding width 180 (260) mm Sanding height max. 160 mm Dimensions (L/W/H) 3065x1600x1900 mm weight of the machine ca. 1500 kg LÖWER Leistomat SD ----- Automatic fine grinding machine for wood grinding (smoothing, defibering and Edge breaking) or intermediate sanding of profiled window bars. With soft disc Technology for the visible surfaces as well as automatically safe profile and Width adjustment. - 2 lamella roller units on the side, each 0.75kW, L=120mm, D=200mm 1 softisc unit Ø=200mm above 0.75kW, 1 slat roller unit L=200mm top 0.75kW, 1 soft disc unit Ø=200mm bottom 0.75kW, 1 slat roller unit L=200mm bottom 0.75kW, 2 lamella roller units on the side, each 0.75kW, L=120mm, D=200mm - Linear guidance of all grinding units Linear ball bearing sets on hardened shafts - time-controlled immersion of all lamella roller units directly above the incoming workpiece edges. By the It is possible to immerse the aggregates deeper into the profiles to be able to deliver. - Motorized workpiece thickness adjustment of the machine - variable grinding flap speed via frequency converter for adjusting the grinding intensity using frequency converters (separate for discs, surface rollers and side rollers) - Disc aggregates as soft discs with Velcro fastener for Grinding wheels (wood pulp) - Feed via three lower and one upper conveyor belts and Spring-loaded pressure rollers with infinitely variable speed 4-15m/min - Parameters that can be set using the touch panel are workpiece thickness, Workpiece width (left side units individually), immersion depth Side units, spindle speed, feed speed - Saving the parameters as machine programs in program mode Credpfxovnv Uhj Akceb - Working in automatic mode with non-contact Workpiece width detection and profile detection as well as automatic Adjustment of the sanding units to the workpiece width and the Profile shape (workpiece height is set in advance) - pneumatically clocked driven feed roller, automatic Clamping of the workpiece and feeding in after unit adjustment - Red/green indicator lights to indicate operational readiness - shortest workpiece length 380mm - Transport belt width 200mm - max. workpiece width 180mm (260mm in the envelope process) - Workpiece height 12-160mm - Suction connection 4 x 100mm and 2x80mm diameter - Sensor-controlled tool blow-off directly on the discs - Length (case) x width x height (mm): 3065x 1600 x 1900 Complete length: 4365mm (including roller conveyor with integrated workpiece width detection) - Weight: 1500kg - Operating voltage 400V, 50Hz, 3P, air connection 6 bar - CE version ----- Price of the above machine on request! ----- Special accessories with additional costs: Set of replacement slats for Leistomat SD-200 consisting of Area aggregates: 30 strips EH45 / 200 - 7 (rolls) 30 strips EH45 / 200 - 20 (rolls) Folding units: 96 strips M55 / 120 - 4 SmartFlex slat disc Ø200 solid with 30 grooves 50mm long Set of replacement slats for SmartFlex slat disc consisting of 60 strip M35 / 50 K 180-7 p Sandpaper disc VB for soft disc D=200mm grit 220 with velor backing (Velcro), pack of 100. Sandpaper disc VB for soft disc D=200mm grit 280 with velor backing (Velcro), pack of 100. ----- Price of the above-mentioned special accessories on request! -----...

Condition: used, used, top condition Machine cleaned and lubricated Partially overhauled. Emergency stop button renewed. All sliding pads replaced Motor cover repaired. Oscillation overhauled and adjusted. Test run conducted Manufacturer: SCM Samco Model: Unilev 15 Machine No.: 98510909050 Motor: 2.2 / 3 kW Oscillation: pneumatic, infinitely variable Veneer edge sanding unit Front table approx. 1400 x 220 mm Crjdey H N Tmjpfx Akcjb Rear table approx. 1440 x 220 mm Tilting table double-sided Belt tension pneumatic Belt length 2170 mm Belt width 150 mm 2 belt speeds: 10 / 20 m/sec mobile Round edge sanding device with support table approx. 500 x 400 mm Extraction connection D 120 mm Required space approx. 1500 x 750 x 1400 mm Weight approx. 490 kg Storage location: 97447 Gerolzhofen, free loaded, unpacked Delivery in as-inspected condition, without warranty or guarantee

Condition: refurbished (used), Drum filter for sale - Fully refurbished - Drum diameter: 630 mm - Drum length: 2450 mm - Slot size: 0.75 mm - Capacity: approx. 500 m3/h - We reserve the right of intermediate sale Crjdpfxjy H Irho Akcob Price: 6,850 EUR + VAT FCA Debrecen

Condition: excellent (used), machine/vehicle number: STX001140015, axle configuration: 3 axles, first registration: 09/1997, total length: 13,600 mm, total width: 2,500 mm, suspension: air, tire condition: 50 %, color: other, Year of construction: 1997, Equipment: ABS, = Additional options and accessories = - air suspension - Drum brakes - Wooden floor Cedoy H Ax Njpfx Akcsrb = More information = Tyre profile: 50% Brakes: drum brakes Suspension: air suspension Technical condition: very good Visual appearance: very good

Condition: as good as new (ex-display), Year of construction: 2026, 5222454 LIBRA 45/2 RTC 135 Wide Belt Sander 5257433 "Z" Designation for RTC 135 5257452 Vacuum table with electric fan 3 kW 5257453 Oscillating belt air-blast device for 5257454 Oscillating belt air-blast device for 5257462 Reinforced motor 15 kW (20 HP) 5257485 Roller table at infeed and outfeed for 5257499 Grooved rubber pressure roller, 2nd position 5257500 Grooved rubber pressure roller, 3rd position 5257504 Infinitely variable conveyor feed with inverter 5257605 Door with inspection window 5257606 LED lamp for internal illumination TECHNICAL DATA Dimensions and Weights Length (product) approx. 1800 mm Width/depth (product) approx. 2000 mm Height (product) approx. 2070 mm Extraction Connection Number of extraction ports: 2 Extraction port diameter: 200 mm Electrical Data Feed motor power: 0.8 kW Connection voltage: 400 V Mains frequency: 50 Hz Height adjustment motor power: 0.25 kW Output power (motor power): 11 kW Sanding Unit Sanding belt length: 2150 mm Sanding belt width: 1370 mm Max. sanding width: 1350 mm Feed Unit Feed speed: 4.5 / 9 m/min Workpiece Min. workpiece height: 4 mm Max. workpiece height: 170 mm Product Information EU 2023/2854 Type of generated data: usage data Format of generated data: common, machine-readable formats, e.g., JSON Data volume: up to 5 MB Continuous real-time data generation: yes Data storage location: on the device and a remote server Data access: on the device and via physical and wireless interfaces Location: ex stock 54634 Bitburg - immediately available - Crjdpjy Ehiwefx Akcjb

Condition: used, machine/vehicle number: 008401, Position 1: Bottom Sanders DMC-UNISAND K-I Position 2: Top Sanders DMC-UNISAND K-I Crsdpjywafnjfx Akcsb

Condition: used, machine/vehicle number: 008291, Position 1: Bottom Sanders VIET-S3 - VALERIA Cjdsx A Tayopfx Akcjrb Position 2: Top Sanders VIET-S3 - VALERIA

Condition: good (used), Year of construction: 2006, I sell the 3-side brushing machine Wikoma SP-3/300 - 1350/2x15°/P, Year 2006. 2 pcs. Surface brushes from top Working width 1350mm Vacuum underpressure table with ventilator. Crsdpfx Akovyln Iocsb Adjustable rotation and feeding speed. Suitable for rustical brushing and patina surface. Profiles possible. Made in Italy Available immediately.

Condition: new, Year of construction: 2024, Sanding belt size: 150 x 2280 mm Engine power: 2,2 kW Cedpfx Aedq H D Sjkcsrb Abrasive belt oscillation pneumatic belt tension Swiveling grinding unit 90 ° / 180 ° Additional table on pulley

Year of construction: 2013, condition: as good as new (ex-display), Technical Details : - Sand Blasting + Liquid electrostatic painting line - Manufacturer - IKL AUSTRIA - Size of metal parts - max. 400x 2000 mm - Two Robots - Capacity - 400 bottles / day Crjdpfshtlw Rex Akcjb - Line consists . 1. Sand Blasting line 2. Electrostatic painnting line

Condition: used, power: 60 kW (81.58 HP), overall weight: 11,000 kg, operation weight: 7,280 kg, Year of construction: 2005, EXCELLENT CONDITION Cedpfxey Hiz Dj Akcorb

Condition: good (used), functionality: fully functional, lifting height: 10 mm, load capacity: 25,000 kg, For sale: Components for hoist P1600 / P2000 Main hoist motor 36/20 K6P P1600/P2000 Fine Gear FG36 Hoist gearbox P1600 / P2000 P2000 housing H20 P1600/ P2000 rope drum H20 P2000 bottom block 4/1, 25t, 20mm rope P2000 rope guide Traverse / sheave - rope pulley Crsdjv Uvftjpfx Akcob All parts in TOP condition Load capacity 25,000 kg / 25 t. Hoist motor 36/20 K6P Fine gear FG 36 20 hoists available for sale 2-stage trolley travel Fully functional Well below OEM list price

Condition: excellent (used), Catalogue number: 7924 TECHNICAL DATA hopper top opening (L/W): 500x600 mm hopper length: 2070 mm shaft width: 550 mm motor: 55 kW number of knives: 4 pcs outlet for shredded wood: rectangular 560/360 mm dimensions (L/W/H): 3950x1520x2820 mm weight approx.: 2500 kg – drum chipper – 4 knives on the shaft – additional built-in fan for chip discharge – condition: very good – used chipper Net price: 23,900 PLN Net price: 5,690 EUR Cedpfx Akjyug Ddjcorb Net price calculated at the exchange rate of 4.2 PLN/EUR (In case of significant exchange rate fluctuations, the price may change)

Condition: excellent (used), CATALOGUE NUMBER 7928 TECHNICAL DATA - Max. workpiece height: 120 mm - Max. workpiece width: 1900 mm - Top unit with 6 brushes - Unit adjustable up/down - Oscillating unit - Rotating star-shaped sanding unit arrangement - Infinitely adjustable brush speed via inverter - Infinitely adjustable feed, rotation, and oscillation speeds - Main motor: 7.5 kW - Vacuum table - Two vacuum pumps: 2×7.5 kW - Pump dimensions: 1100x800x940 mm - Extraction port diameter: 4x150 mm, 4x200 mm - Overall machine dimensions (L/W/H): 2850x2100x2400 mm - Weight approx. 2500 kg ADVANTAGES – Two vacuum pumps – With oscillation – Rotating aggregate – German-made – Unpainted – Original DTR documentation – Used sander, very good condition Net price: 45,900 PLN Crodpfxjyu Tmlo Akcjb Net price: 10,900 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In case of major exchange rate fluctuations, the price may change)

Condition: used, Year of construction: 1995, Constant machine - combination station, dust brush - thickness measuring device - electronic segmented sanding pad MCS System Weber 32 mm - grooved steel calibrating roller - belt blow-off - vacuum conveyor belt. Sanding width: 1100 mm Drive: 15 kW Feed approx. 1.1 kW Height adjustment 0.25 kW Sanding belt dimensions: 1150 x 2500 mm Max. workpiece thickness: 150 mm Machine width: 1700 mm Machine length: 2000 mm Machine height: 2160 + 150 mm Machine weight: 1900 kg Constant working height: 850 mm Extraction connector: belt 180 mm / brush 120 mm Suction air volume: 0.74 m³/s Connected load: 23 kW Compressed air supply: 7 bar Feed speed: 3-15 m/min. Operating hours: 7000 h Location: Nattheim Crsdpfxjx Twcpo Akcob