Used Sandblaster for sale (326)

Condition: new, Year of construction: 2025, Maintenance-friendly dedusting system specially developed for aggressive sandblasting dusts with pre-chamber impact separator, complete essentially consisting of: Bsdpfow Ivrkjx Acnjll a) 1 cartridge dry filter, type PF 1.4.B62.00 5000m³/h (other sizes available) each consisting of a stable, vacuum-tight 3 mm sheet steel housing, divided into the raw gas chamber with filter cartridges, filter pre-chamber impact separator and clean gas chamber with filter cleaning by means of compressed air, each with separate Easy Open maintenance door. Dust collection hopper with slotted valve for dust disposal using big bags. Solenoid valve control with differential pressure display for optimum adjustment of the filter cartridges - cleaning. Maintenance doors as swing doors Maintenance easy.

Condition: good (used), Year of construction: 2001, Machine is open at the top! Max. blasting length: 2800 mm Max. blasting height: 1200 mm Glass thickness: 3 to 40 mm Bedpfx Asxvbpiocnoll Electrical connection power: 2.2 kW External dimensions: Width: approx. 4100 mm Height: approx. 2300 mm Depth: approx. 1900 mm

Condition: new, Year of construction: 2026, Abrasive Conveyor Screw 5m with Dosing Hood Blsdpfx Aoynz Idecnjl For installation as a transverse screw conveyor to the bucket elevator at the end of the hall (pushing abrasive across the full hall width with a forklift) - 5m + outlet to bucket elevator, solid-blade screw Ø250mm with 5mm thick screw flights. - Can be used as an abrasive storage hopper. The blasting system draws abrasive as needed via a level probe. - Depending on installation depth, allows up to 24 hours of uninterrupted blasting without hall cleaning. - Hall cleaning takes only 10 minutes using a forklift or wheel loader. - Very low maintenance and repair costs compared to a complete conveyor floor. - Particularly suitable for very heavy workpieces. - Lower acquisition costs compared to a full-area conveyor floor. - Reduced foundation costs compared to a full-area conveyor floor. - Can be pushed across the full hall width as opposed to a sweep pit. - Very high warranty period.

Condition: new, Year of construction: 2026, functionality: fully functional, Manual blasting carriage for blasting plant, 5t loading capacity Blsdpfxsyyxa No Acnol - L = 3000mm W = 1500mm H = 500mm - Load capacity: 5t - Carriage with flanged wheels for rails in the blasting chamber - Upright profiles to allow blasting media to drain off - Tow eyes for forklift - Rotary table available as an option

Condition: new, Year of construction: 2025, Shot blasting booth DSK 20.10.09 with trolley and rotary table. Width: 2050mm, Depth: 935mm, Height: 955mm Lift-up door with pneumatic system, offering the advantage that the blasting media falls into the booth when the door is opened, rather than onto the floor. If you have any questions regarding technical specifications, etc., please contact us in writing or by phone. The machines are based on manufacturing at the Grossenlueder site, which has been ongoing since 1971. Harth & Seifert - Georg Fischer - Schiffmann und Seidl - Oliver Fritz GmbH & Co. KG, with their long-standing and well-known contacts. Blsdpfjfnh Rvsx Acnol

Condition: new, Year of construction: 2025, sandblasting containers allow flexible blasting in closed rooms at any location where it is required. 8,89 x 2,35 x 2,69 m A closed sandblasting grit circulation using an integrated flat conveyor or screw conveyor floor, or via side-mounted recirculation channels, with optimal preparation of each blasting grit, ensures effective exploitation of the grit.Depending on the container size and required area output, one or more free jet pressure blowers can be used. The blasting nozzles of our tried and tested free jet pressure blowers are manually guided. Our free jet pressure blowers can be fitted with an automatic refilling system to ensure continuous operation without interruption for the blaster. Bjdpefnh Rwofx Acnoll

Condition: used, Year of construction: 2001, Beam area: Beam width: max. 3000 mm Beam height: max. 2250 mm Workpiece dimensions: Glass height: max. 2,400 mm Glass width: unlimited Glass thickness: 3-40 mm Capacity: approx. 15 m²/h Bodpfsw Ivwtjx Acnsll Width: 3770 mm Height: 3300 mm Depth: 1900 mm

Condition: good (used), Year of construction: 2017, Blasting area (WxH) (mm) 4000x2500 Max. pane height 2600 mm Bodpfx Acexqnuujnoll Glass thickness: 3-30 mm Height: approx. 2640 mm Width: approx. 5100 mm Depth: approx. 2000 mm

Condition: ready for operation (used), 20-foot sandblasting rental container with pressure blasting equipment, filter system, and safety equipment Bledpsxl Dq Uofx Acnjl

Condition: new, Year of construction: 2025, functionality: fully functional, air demand: 200 m³/h, total width: 2,400 mm, total height: 2,350 mm, total length: 3,500 mm, Cartridge filter system MBX-6000 with 8 cartridges. Suitable for filtering all types of dust, e.g. wood, sand, etc. Effective air output: 6000 m³/h, electric motor 9 kW, 3x400 Volt, 50Hz, filter area: 104 m² (8x13 m²), filter class: M, according to DIN 60335, filter cleaning: pneumatic, 10 min run-on. Dust containers: 4 pcs, each 30 liters. Bledpfx Aex Ai Hpscnsl Clemco blasting pot (used), 100 liters Screw compressor Renner RSK 1-30, year of manufacture 2020, 1178 operating hours.

Condition: new, Year of construction: 2026, Mobile 100L pressure blast pot for construction sites or stationary use. Fittings securely mounted beneath the handle. Ideally suited for demanding construction site applications. Comprises: - 100L pressure vessel - Pre-sieve - Weather protection cover - Water separator - Pressure regulator - Adjustable delivery air (air volume for vessel and blasting hose) - Blasting hose Ø25mm, 10m - Venturi blasting nozzle Ø8mm (air consumption at 6 bar approx.: 3.57 m³/min) - Abrasive mixing valve Y-piece, rubber-coated for reduced wear - Breathing air filter with 10m air hose - Blasting helmet Safety equipment: - Dead man switch with control cable - Pneumatic quick venting control Optional: - Larger handle with hose holder - Wet blasting head Bedpfx Asynr Emocnell - Breathing air heater - Transport frame with container and lid as attachment for extended blasting without refilling - and more. Manufactured in Germany

Condition: new, Year of construction: 2026, Desciption in english language after demand. Bjdpedulhvsfx Acnoll

Condition: used, mileage: 740,000 km, power: 338 kW (459.55 HP), first registration: 05/2001, fuel type: diesel, overall weight: 26,000 kg, emission class: euro3, Equipment: ABS, all wheel drive, MAN FE 460 !!!! DAUTEL INTERCHANGE SYSTEM - Tipper + Fifth Wheel Coupling !!!!! First registration: km 6X4 German vehicle Dautel Interchange System Tipper Onboard computer Bsdpfx Acey Rcf Dsnoll Tipper and frame completely sandblasted and repainted Fifth wheel coupling Supports Tel: Visit our website: ----German/English/Serbian/Croatian/Bosnian/Bulgarian... Goran German/English/...?/... ... Roman We will gladly take care of your financing or leasing. EU sale: net price upon presentation of company documents and tax/VAT number. VAT deposit: 2000 € Our service for you: - Customs license plates - Export documents and EUR1 - Worldwide transport - Overnight accommodation - Transfer from Munich Airport or Passau train station

Condition: used, mileage: 740,000 km, power: 338 kW (459.55 HP), first registration: 05/2001, fuel type: diesel, overall weight: 26,000 kg, emission class: euro3, Equipment: ABS, all wheel drive, MAN FE 460 !!!! DAUTEL INTERCHANGE SYSTEM - Tipper + Fifth Wheel Coupling !!!!! First registration: km 6x4 German vehicle Dautel Interchange System Tipper Bordmatic Tipper and frame completely sandblasted and repainted Fifth wheel coupling Supports Tel: Blodpfx Aoy Rcfkscnol Please visit our website: ---- German/English/Serbian/Croatian/Bosnian/Bulgarian... Goran German/English/...?/... Roman We will be happy to assist you with financing or leasing. EU sale: net price upon presentation of company documents and tax/VAT number VAT deposit: €2000 Our services for you: - Customs license plates - Export documents and EUR1 - Worldwide transport - Overnight accommodation - Airport transfer (Munich) or train station transfer (Passau)

Condition: reconditioned (used), functionality: fully functional, machine/vehicle number: 031022140047, Year of construction: 2022, operating hours: 126 h, total length: 650 mm, total height: 1,200 mm, total width: 610 mm, overall weight: 145 kg, laser power: 30 W, feed length X-axis: 130 mm, feed length Y-axis: 180 mm, feed length Z-axis: 330 mm, We are offering for sale a professional industrial SLS 3D printer, the Sinterit Lisa X, from our company's assets. The machine has been used very little, exclusively for development purposes, as evidenced by its total runtime of only 126 printing hours. The printer is in like-new condition, fully functional, and ready for immediate deployment in your production. Bedozyagzspfx Acnoll Before the sale, the machine underwent a complete diagnostic check, software update, and professional service by an authorized partner. During this service, the printer received a significant hardware upgrade. The original wire-based powder deposition mechanism was replaced with a new and highly reliable system using a strip (so-called Recoater Strip retrofit) as part of the authorized intervention. This ensures maximum reliability and trouble-free operation. Furthermore, the seals of the printing chamber were replaced, the machine was professionally cleaned, the electronic contacts were treated, and the paint was restored. The machine has successfully completed a calibration print under load and is running on the latest firmware. Regarding the technical specifications, it utilizes Selective Laser Sintering (SLS) technology with a 30W IR laser. The printing speed reaches up to 14 mm/h, which is ideal for rapid prototyping and small-batch production. The printing volume is 130 x 180 x 330 mm for PA and PP materials and 130 x 180 x 340 mm for flexible materials. A major advantage is the open system of the Sinterit Studio Advanced software, which allows full support for third-party printing materials and access to dozens of printing parameters. As a huge bonus, we are including the available stock of printing powder completely free of charge with the printer. If interested, it is possible to purchase the complete set of accessories for subsequent processing of the prints (cleaning manipulator, sandblasting station, certified ATEX vacuum cleaner) after mutual agreement. We will be happy to provide you with more information, send you the complete machine specifications, or arrange a personal inspection.

Condition: new, Year of construction: 2026, CORMAK 10 bar Diesel Compressor is a modern, fully independent source of compressed air, designed for professionals who require maximum performance and mobility in the field – wherever access to a fixed electrical power supply is unavailable. The unit combines advanced engineering, European manufacturing precision, and innovative design solutions to ensure reliable operation even under the most demanding working conditions. KEY ADVANTAGES AND FEATURES 10 bar operating pressure: Optimal pressure parameters ensure a stable supply for a wide range of pneumatic tools, construction machinery, sandblasting equipment, and drilling machines. Blodpfszxzchsx Acnjl Full mobility on its own wheels: A robust running gear mounted on heavy-duty wheels allows for easy transportation and effortless movement of the compressor directly to the work site. Third jockey wheel on the drawbar: The additional swivelling wheel mounted on the drawbar significantly facilitates precise positioning and manoeuvring of the compressor on construction sites or in confined working areas. Four independent levelling jacks: Allow the machine to be perfectly levelled, even on uneven or difficult construction terrain. Opening housing panels with gas-oil struts: Provide quick and wide access to all service components, ensuring convenient maintenance and periodic inspections. Built-in brake: Enhances safety during transportation and when the unit is parked on slopes. TECHNOLOGY AND PERFORMANCE CORMAK diesel compressors are designed using high-quality components, resulting in a long service life and low operating costs: High-performance screw air end: The heart of the compressor ensures high effective output, continuous operation, and resistance to intensive use in industrial environments. Sound-insulated and durable enclosure: The robust construction with sound-insulating panels effectively reduces noise levels, improving operator comfort and minimising the impact on the surrounding environment. Advanced cooling system: A specially designed cooler combined with an efficient cooling system ensures optimal thermal conditions, even when operating under heavy loads and at high ambient temperatures. Intuitive control system: The electronic control panel enables full monitoring of key operating parameters, such as pressure and temperature, while facilitating diagnostics and maintenance planning. APPLICATIONS Construction and road construction: Powering pneumatic breakers, drills, wellpoint systems, and machines for plastering and spray painting. Service and field work: An indispensable source of compressed air wherever a 400 V mains power supply is unavailable. Heavy industry and installation work: Rapid support for production and installation processes in the field. TECHNICAL SPECIFICATIONS Parameter Specification Power 42.4 kW Air delivery 5,100 l/min Operating pressure 10 bar Drive transmission Direct drive Compressor cooling system Air/oil Oil capacity 45 L Air outlet valves 3 pcs. Battery 12 V DC – 790 A – 115 Ah Fuel tank capacity 44 L DIESEL ENGINE Parameter Specification System 4-stroke Displacement 2,615 cc Number of cylinders 4 Rated power at 2,000 rpm 42.4 kW Cooling system Air Lubrication system Oil Lubrication system capacity 10.2 L

Condition: used, mileage: 1,971,750 km, power: 353 kW (479.95 HP), first registration: 07/2003, fuel type: diesel, overall weight: 18,600 kg, axle configuration: 2 axles, brakes: retarder, color: grey, gearing type: mechanical, emission class: euro3, Year of construction: 2003, Equipment: ABS, air conditioning, electronic stability program (ESP), parking heater, Information in English: SCANIA R164 480 V8, RETARDER, MANUAL GEARBOX, SHOWTRUCK, UNIQUE CONDITION First registration: Valid inspection: Mileage: 1,971,730 km VIN number: XLER4X200496427 Engine power: 353 kW (480 HP) V8 Transmission: Manual gearbox Wheelbase: 370 cm Own weight: 7,760 kg GVW: 18,600 kg Colour: Grey metallic and black Suspension: Front parabolic, rear air-suspended Emission class: Euro 3 Configuration: 4X2 Tyres, axle 1: 385/65 L80% R80% Michelin Tyres, axle 2: 315/70 L80% R80% Michelin 5th wheel height: 116 cm Cabin type: Topline Extras: Retarder, Air conditioning, Parking heater, Refrigerator, Microwave, King of the Road package, Double windows, Complete cabin upholstered by Kentie Truckspecials, 2x luxury leather seats, Oldschool steering wheel (Original 4 series steering wheel included), 2x tanks with a total volume of 1,000 liters (700+300), Danish boxes on the other side, Extra lights, Special rear bumper, Full chassis covering, Exhaust system with valve, Complete service history available (at Scania), Comes directly from the second owner who has owned the truck since 850,000 km, Engine overhauled in 2022 by Scania Waddinxveen, Truck completely rebuilt in 2022, Completely sandblasted and repainted, Names are stickers and will be removed upon sale, All lights renewed in 2022 and many more, Complete rebuild cost more than 1500 working hours, Valuation report available, This truck is a one-of-a-kind truck due to its excellent condition and history, Very well maintained and used by a real enthusiast and perfectionist. AN UNIQUE OPPORTUNITY TO BUY AN ASTONISHING R 164 AS GOOD AS NEW AND DIRECTLY AVAILABLE Further information: * Payload: 10,840 kg * Height: 3950 mm * Width: 2540 mm * Length: 5940 mm * Type | Front axle: Michelin * Tyre size | Front axle: 385/65 R22.5 * Tyre tread depth inside left | Front axle: 80% * Tyre tread depth inside right | Front axle: 80% * Maximum axle load | Front axle: 7100 kg * Type | Rear axle: Michelin * Tyre size | Rear axle: 315/70 R22.5 * Tyre tread depth outside left | Rear axle: 80% * Tyre tread depth inside left | Rear axle: 80% * Tyre tread depth outside right | Rear axle: 80% * Tyre tread depth inside right | Rear axle: 80% * Maximum axle load | Rear axle: 11,500 kg * Wheelbase: 370 cm * Cabin: Yes * Price on request: Yes * Position | Front axle: Front * Brand | Front axle: Other * Brake type | Front axle: Disc brakes * Suspension | Front axle: Parabolic springs * Steering | Front axle: Yes * Position | Rear axle: Rear * Brand | Rear axle: Other * Brake type | Rear axle: Disc brakes * Suspension | Rear axle: Air suspension * Reduction | Rear axle: Single reduction * Twin tires | Rear axle: Yes * Driven | Rear axle: Yes * Differential lock | Rear axle: Yes Further equipment: * 27 MC / CB * Aluminium fuel tank * Anti-lock braking system (ABS) * Traction control * Heated mirrors * Roof spoiler * Differential lock * Double fuel tank * Electric windows * Electrically adjustable exterior mirrors * Electronic Braking System (EBS) * ESP * Cruise control Blodpjzxkxlofx Acnsl * Air conditioning * Refrigerator * Air suspension * Air horns * Microwave * Fog lights * Parabolic suspension * Retarder * Disc brakes * Sleeper cab * SemCollection * Parking heater * Central lubrication system * Central

Condition: repair required (used), functionality: limited functionality, Year of construction: 2001, Installation for crushing waste from construction site bins and demolition concrete, manufactured by DBT. The technical specifications are presented in the attached documents. This machine will be sent to the workshop for a major overhaul of the jaw crusher drive system. The electric motors and gearboxes will be inspected. The unit will be disassembled and sandblasted before applying a rust-proof coating, followed by a two-layer varnish. CE marking will be applied. Bodezxh N Uopfx Acnell

Year of construction: 2026, condition: new, Sandblasting cabinet for clean blasting operations without contaminating the working environment. Suitable for various blasting media, e.g., quartz, glass beads, plastic beads, etc. Ideal for cleaning, derusting, or removing paint from metal parts of all kinds, e.g., engine parts, fittings, signs, housings, rims, hinges. High-quality latex work gloves are securely attached to the housing. A viewing window with an attached protective film provides optimal visibility and work safety during workpiece processing. Dust-free operation due to all-round seals on the lid and door frame. A sturdy support grid allows workpieces to be placed inside the cabinet. With a drain opening for changing the blasting media. Suction pipe for the blasting media attached to the bottom of the collection container. With compressed air connection on the outside. 2 large side doors for loading and unloading from both sides, even for longer workpieces. Integrated extraction system with replaceable air filter. Airflow is controlled via a foot pedal. 2 blasting guns: one fixed and one freely movable blasting gun. 3 separate switches for on/off, extraction, and cabinet lighting. 2 fluorescent tubes (230 volts), in a separate housing with a protective screen and replaceable protective film, including 5 replacement films. Working pressure is regulated via a pressure regulator with a pressure gauge. Scope of delivery: High-quality blasting gun with ceramic nozzle. 4 ceramic nozzles (4 / 5 / 6 / 7 mm). Includes 5 replacement films for the viewing window. Technical data Working cabinet volume: 310 l Air consumption: 200 - 350 l/min Bodocqm Rropfx Acnoll Working pressure: 2.8 - 8.0 bar Compressed air connection: 3/8" Blasting media particle size: 0.42 - 0.125 mm Internal dimensions: 945 x 605 x 605 mm External dimensions: 960 x 900 x 1640 mm Weight Max. working pressure: 8.6 bar Location: Arriving at warehouse 54634 Bitburg.

Condition: used, Manufacturer : Clextral Blsdjy Abclopfx Acnol Model : Evolum 32 Type: Twin-screw extruder Previous application: Food processing – Cooking and extrusion Frame sandblasted and repainted by the manufacturer Assembly comprising screws, barrel, shaft, coupling and bearing housing: brand new, original Clextral parts. To be assembled Refurbished second-hand Leroy Sommer 23.8 kW DC motor. To be assembled DC motor: 23.78 kW Length of screw/barrel: 640 mm Screw elements: nominal diameter 32 mm. L/D : 20 Peripheral equipment not included but available on request: Granulator, dosing unit, water pump and new electrical cabinet. (Their integration may be subject to a feasibility study and a supplementary quotation.)

Condition: like new (used), Manufacturer: Siebtechnik Type: V 15/20/1 Size: 1.500 x 2.000mm Deck: 1 Blsdpfxsg Snuhe Acnel Included: – Electrical Motor – Springs Overhauled, sandblasted and painted.

Condition: used, Year of construction: 2017, functionality: fully functional, type of input current: three-phase, filter area: 216 m², suction capacity: 8,000 m³/h, negative pressure: 3,200 Pa, Dust extraction unit, fume extractor for welding, self-cleaning filter, pneumatic, vacuum-based, designed for continuous operation. Bjdoy T Iyropfx Acnell Suitable for plasma cutting, laser cutting, sandblasting, soda blasting, welding, and all types of dry dust. The fan is located behind the filter on the clean air side, which minimizes the risk of explosion. Ultra Web filter cartridges are pneumatically cleaned with compressed air pulses during operation, ensuring high device efficiency. Brand: FÜCHTENKÖTTER Model: FKPF 192/12 Fan power: 11 kW Airflow: 8000 m3/h Vacuum: 3200 Pa Nozzle diameter: 500 mm Number of filter cartridges: 12 pcs. Filtration area: 216 m2 Year of manufacture: 2017 New filter cartridges (coated with impregnant) Dimensions: Height: 4.02 m Width: 3.95 m Depth: 1.85 m Base: 2.50 m x 1.70 m Stock number: 1120

Condition: good (used), functionality: fully functional, “Steinert NES 150 220 E 5009” for Sale Bodpfxozvbvio Acnell Manufacturer: Steinert Type: NES 150 220 E 5009 Belt widthness: 1.500 mm (New belt) With new control-unit. Overhauled, balanced, sandblasted and painted.

Condition: new, Year of construction: 2026, The Josan S21 is a compact, robust, and powerful wheel loader with full equipment at an attractive price. With a lifting capacity of approximately 1,200 kg and a low overall height, it is ideally suited for low entrances, halls, stables, and farm work. Despite its compact design, the S21 features a spacious full cab with heating and ventilation. With an unladen weight of only approximately 2,200 kg, the wheel loader remains comparatively light and can be easily transported on a suitable trailer. The wide cab provides comfortable working conditions and good all-around visibility. ‼️ IN STOCK ‼️ AVAILABLE FOR ON-SITE INSPECTION ‼️ OUR COMPONENTS ✅ Nationwide FREE delivery to your farm! ✅ TÜV SÜD certificate ✅ TÜV Rheinland 2000/14 CE certified and tested according to German UVV guidelines (cab FOPS and ROPS certified) ✅ SOFT HYDRAULICS! We source our hydraulics from the same supplier that also sells to high-end wheel loader manufacturers. This ensures sensitive and precise raising and lowering of the pallet fork. Feel free to test it on our premises! ✅ POWDER COATED. Steel is sandblasted, then plastic powder is applied and baked in the oven. Our frame, tanks, boom, etc., are treated in this way. This provides extreme rust protection, which is INCLUDED! ✅ NEW! Larger luxury cab for more legroom. With reinforced steel, we now meet the current FOPS and ROPS standards! This is very important for your safety. ✅ AIR-SUSPENDED COMFORT SEAT adjustable to your weight ✅ NEW! LIFTING CAPACITY approx. 1200 kg! ✅ Hydraulic Euro attachment (standard EU dimensions) ✅ Up to 7 years warranty* ✅ Nationwide service by experts in our own workshop ✅ We stock all spare parts in Gemmrigheim. This allows us to ship parts within 24 hours. ✅ We have our own factory in China! ✅ Continuous monitoring during the production process ensures very high quality. ✅ Thanks to our know-how and good mechanics, we can also provide short-term and uncomplicated assistance after the warranty period (throughout Germany and Europe). Technical data: ➡️ Unladen weight ONLY approx. 2200 kg ➡️ Lifting capacity approx. 1200 kg ➡️ Dimensions (L x W x H): approx. 4200 x 2200 x 1600 mm ➡️ Euro 5 engines ➡️ All-wheel drive ➡️ Cab width approx. 1.25 m ➡️ Internal cab height approx. 1.35 m ▶️ Tipping height approx. 2.85 m ➡️ New with large comfort cab (internal width approx. 1.10 m) ➡️ Articulated steering ➡️ Adjustable steering column ➡️ Large all-round view ➡️ Hydraulic oil cooler ➡️ UVV NEW 1 year ▶️ Additional control lever to regulate the tilting speed of the bucket/fork ➡️ Automatic engagement of creep and fast speed ▶️ 2-stage torque converter transmission, electrically controlled ➡️ Electric joystick for forward and reverse movement with thumb on the joystick Bljdpfoufwyzjx Acnel ➡️ Wide tires 31/15.5/15 AS profile (Note: only the narrow tires are shown in the picture) ➡️ 3rd and 4th control circuits with separate small joysticks ➡️ Float function ➡️ Safety belt ➡️ Bucket Optional: ➡️ AVAILABLE IMMEDIATELY! Combined pallet fork with attachment and tines (We have 1.20m tines and two spears, length approx. 90cm) ➡️ Euro attachment with hydraulic locking pins ‼️ We also have a wide range of accessories, from bale clamps and crocodile jaws to snow plows! Just ask. Net price €12,999.00 +19% VAT €2,469.81 Gross price €15,468.81 Errors and omissions excepted Images/text may vary *Please inquire about our warranty conditions.

Condition: new, functionality: fully functional, Year of construction: 2026, ‼️ROAD APPROVAL‼️ Josan – our budget-friendly loader Robust, reliable, and affordable – without unnecessary frills. Simple, easy-to-maintain technology without a laptop, computer, or complicated electronics. Our wheel loaders are powder-coated instead of just painted – a clear advantage against rust and de-icing salt. Whether for forestry, agriculture, equestrian facilities, construction sites, or commercial use: the all-purpose loader is versatile and available with around 20 different attachments – from buckets and clamps to sweepers and augers, as well as other specialized equipment. S22 Budget Loader means: Standard equipment ⚙️OUR COMPONENTS ✅ Road approval* from TÜV SÜD – available from us! ✅ TÜV SÜD certificate ✅ TÜV Rheinland 2000/14 CE certified and tested according to German UVV guidelines ✅ SOFT HYDRAULICS! We source our hydraulics from the same supplier who also supplies high-end wheel loader manufacturers. This ensures sensitive and precise lifting and lowering of the pallet fork. Feel free to test it at our facility! ✅ POWDER COATED. Steel is sandblasted, then plastic powder is applied and baked in an oven. Our frames, tanks, booms, etc., are treated this way. As a result, you get extreme rust protection, included in our price! ✅ NEW! Larger luxury cabin for more legroom. The steel has been reinforced again, so we now meet the current FOPS and ROPS standards! This is very important for your safety. ✅ AIR-SUSPENDED COMFORT SEAT adjustable to your weight. The seat is used by well-known EU manufacturers! ✅ NEW! LIFTING CAPACITY approx. 1200 kg! With an unladen weight of approx. 2300 kg including bucket – speaks for itself! ✅ Hydraulic Euro attachment (standardized EU dimensions) ✅ Up to 7 years warranty* ✅ Nationwide service by experts in our own workshop ✅ We stock all spare parts in Gemmrigheim. This allows us to ship parts within 24 hours. ✅ We have our own factory in China! Check out our website for pictures and videos! ✅ Through continuous monitoring of the production process, we have achieved very high quality. ✅ Thanks to our know-how and skilled mechanics, we can provide short-term and uncomplicated assistance even after the warranty period (throughout Germany and Europe). Technical data: ➡️ Unladen weight only approx. 2300 kg (with bucket) ➡️ Lifting capacity approx. 1200 kg ➡️ Dimensions (L x W x H): 4500 x 1300 x 2550 mm ➡️ Tipping height 2.83m ➡️ All-wheel drive ➡️ Soft hydraulics ➡️ Euro 5 engine ➡️ Articulated steering with oscillating axle ➡️ Comfort cabin ➡️ Bucket 0.6 m³ ➡️ Hydraulic oil cooler ➡️ Radio with MP3 ➡️ Adjustable steering column ➡️ Additional control lever to regulate the tilting speed of the bucket/fork ➡️ Automatic engagement of slow and fast gear Bledpfoxx Nyhjx Acnel ➡️ 2-stage torque converter transmission, electrically controlled ➡️ UVV NEW 1 year Optional: ➡️ Road approval ➡️ Rear view camera ➡️ Air-suspended comfort seat and retractable seat belt ➡️ Electric joystick for forward and backward movement with thumb control ➡️ Tires as shown in picture 31/15.5/15 with AS profile (not the standard 12.5/16) ➡️ 3rd and 4th control circuits with separate small joysticks ➡️ Floating function ➡️ Stainless steel exhaust ➡️ Combined pallet fork with attachment and tines ➡️ Euro attachment with hydraulic locking pins Net 10,499.00 € +19% VAT 1,994.81 € Gross 12,493.81 € Josan – the future of construction Innovative, robust & affordable. *Please inquire about our warranty terms. Pictures/text and equipment may vary.