Used Round Bar Tables for sale (37,994)

Condition: good (used), Hydraulic unit, hydraulic pump, hydraulic pump, universal unit, hydraulic station, -Double hydraulic unit: with hydraulic tank -Hydraulic pump 1: Motor Garbe-Lahmeyer 1.1 kW / 40 bar / 1.5 l/min -Hydraulic pump 2: Motor Garbe-Lahmeyer 0.75 kW / 30 bar / 18 l/min Iodpfx Afsw S Hnqjfstr -Individual components: see photos -Dimensions: 760/435/H825 mm -Weight: 206 kg

Condition: like new (used), Year of construction: 2020, Features of Rotary Table: - Designed for Fanuc controllers - Side-mounted motor with reduced backlash - Double worm gear for easy adjustment and higher precision - Detron-exclusive dual-piston braking system for increased clamping force Technical Specifications: - Table diameter: 255 mm - Center bore diameter: 65H7 mm - Table height (horizontal): 190 mm - Center height: 160 mm - T-slot width: 12H7 mm - Guide block width: 18 mm - Clamping method/pressure: 5–7 bar - Clamping torque: 400 Nm - Transmission ratio: 1/72 - Maximum table speed: 53.3 rpm - Permissible moment of inertia (W.D28): 1.38 kg/m2 - Resolution: 0.001° - Indexing accuracy: 20 seconds - Repeatability: 6 seconds - Net weight (without servomotor): 67 kg - Permissible load capacity (vertical): 125 kg - Permissible load capacity (horizontal): 250 kg - Permissible load with tailstock: 250 kg - Permissible clamping load (table clamped): F: 17,000 N - Permissible clamping load (table clamped): FXL: 1,265 Nm - Permissible clamping load (with table locked): FXL (diagonal): 400 Nm - Permissible cutting torque: 260 Nm - Maximum permissible number of rotary joints: 4 Features of Tailstock: - Manual tailstock with removable Morse taper - Fully sealed unit - Center height: 160 mm Itsdpfx Afsx E Tazefjr

Condition: used, * like new Itjdpfx Aslf Ncrsffor * 130x12x20mm

Condition: excellent (used), Year of construction: 2012, Technical Data: Working width: 2600 mm Bending capacity: 20.0 mm Pre-bending: 16.0 mm Isdpfx Afex Ii Hvsfjtr Top roll diameter: 330 mm Middle roll diameter: 300 mm Side rolls diameter: 240 mm Conical bending device via tilting of both side rolls Mobile control panel with digital display Motor power: 11 kW CE mark Dimensions (L x W x H): approx. 5800 x 2300 x 1900 mm Weight: approx. 11 t Additional equipment: Upper bending aid The seller is not liable for typographical or data transmission errors. The machine's appearance, technology, and wear are consistent with its age; used machines are sold without any warranty.

Condition: good (used), Year of construction: 2001, functionality: unexamined, machine/vehicle number: 2491, Country of manufacture: Switzerland Net weight: approx. 2550 kg Customs tariff number: 8458.11 20 Dimensions: 2000 x 1260 x 1950 mm Isdpsw Uc D Hofx Affjtr TECHNICAL CHARACTERISTICS 10-axis machine – standard version 10 axes, 6 spindles: Axes and spindle designation: - 1 sliding headstock: Z1, S1 - 2 independent vertical gangs: X1Y1, S6 – X2Y2, S2 - 1 unit with 4 rotating spindles: X3Z3, S3 - 1 independent sub-spindle: Y4Z4, S4 - 1 independent rotating sub-operation axis: X4, S5 Bar feeder position: right of the operator Machine axis height: 1100 mm Main spindle travel: max. 255 mm Bar capacity: 1 to 16 mm Spindle speed: 12,000 rpm Spindle feed rate: max. 20 m/min Bar capacity, min./max.: 13 mm / 16 mm Max. workpiece length: Guide bush machining: 180 mm Collet machining: 30 mm Sub-spindle speed: 12,000 rpm Main spindle drive power: 2.2 kW (continuous) / 3.7 kW (intermittent) Sub-spindle drive power: 1.5 kW (continuous) / 2.2 kW (intermittent) Clamping collet, type: F20 (no. 76-201) Guide bush: fixed / rotating Collet for guide bush, type: Meister 605 Number of lateral tool stations, combined: Fixed: 2 x 5 Rotating: 3 + 3 Number of frontal tool stations, combined: Fixed: 4 Rotating: 3 Number of rear tool stations, combined: Fixed: 3 + 3 Rotating: 3 + 3 Tool section: 12 x 12 mm Standard revolving toolholder: ESX 20 Bar feeder: yes Part catcher: yes All technical details are provided without guarantee and subject to errors or omissions.

Condition: ready for operation (used), Rösler R420 Rotary Vibrator Mass Finishing Machine Lining approximately 15mm thick Capacity: 420 liters Outer diameter: approx. 1520mm Process channel width: 360mm Top edge of container height: 1235mm Motor power: 7.5 kW Speed: 985 / 1480 rpm Total power consumption: 6.2 kW Dimensions: 1600mm x 1900mm x 1300mm (W x L x H) Weight (empty): 1076 kg Water / air supply: Water Ø9x30mm, Air Ø6x32mm Rösler RT150 Rotary Dryer Dimensions: 1400mm x 1300mm x 1000mm (L x W x H) Weight: approx. 300 kg Motor power: 0.8 kW Infeed/outfeed height: approx. 860mm Max. workpiece size: up to approx. 80mm diagonal Voltage: 400V three-phase Rösler Separation Unit / Separator You are welcome to arrange a viewing appointment. We would be happy to organize cost-effective shipping for you. You will receive a proper invoice. Ijdpfx Ajwz Nlreffetr For international customers, a net invoice can also be provided. A valid VAT ID number is required. Subject to prior sale. Visit our shop and view our other offers as well. Any company names and trademarks mentioned are the property of their respective owners and are used for identification and description purposes only. Deviation from technical data and errors in item descriptions may occur and are subject to change.

Condition: good (used), Short-stroke heavy-duty cylinders, high-pressure hydraulics, compact cylinders, light metal cylinders, high-pressure cylinders, universal cylinders, hydraulic cylinders, straightening cylinders, hydraulic rams, hydraulic pressure cylinders, lifting cylinders, pressure rams, hydraulic short-stroke cylinders, adjusting ring cylinders -Manufacturer: Enerpac, short-stroke heavy-duty cylinder, adjusting ring cylinder type HCL 1006 -Pressure force 113 ton -Stroke: 150 mm -Piston: Ø 200 mm -Operating pressure: max. 700 bar -Number: 1x cylinder available -Price: per piece Itodpfx Aektm Egeffor -Dimensions: 230/220/H290 mm -Weight: 54 kg/piece

Condition: used, Year of construction: 2016, mileage: 91,000 km, power: 169 kW (229.78 HP), first registration: 03/2016, overall weight: 15,000 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, next inspection (TÜV): 12/2027, gearing type: mechanical, emission class: euro6, loading space volume: 6 m³, Equipment: air conditioning, Internal vehicle number: G300453 German vehicle Available immediately at our yard in Kaufungen - Kassel More INFO from Luis Lucena (German, English, Español, Français) A FAUN VIAJET 6 R/H right sweeping unit Color camera system with 7'' TFT flat screen Front LED strobe lights for truck Holder for shovel and broom Bracket for standpipe and wrench Manual suction device DN 250 at the rear High-pressure cleaner 15l/100 bar with light lance, 15m hose, and automatic hose reel Hydraulic manhole cover lifter Hydrostatic transmission integrated into the drivetrain Raised front and rear axles LED work lights for disc brush LED double flash beacon, 1x at the rear of the hopper Pneumatically operated shut-off slide at the suction/sweeping intake Silent Plus Road washing unit at the front FRT 3 step plate safety device at the rear Adjustable tilt of the disc brush from the cab VIAJET 6 R/H (hopper volume 6 m³) Sweeper unit mounted higher for sidewalk cleaning, telescopic, pneumatically swiveling/liftable disc brush Warning indicator/warning signal in cab for tilted hopper Toolbox L/W/H: 420/400/200 mm Emission standard EURO 6 Axle configuration: 4x2 Front axle load 5.3 t Curb/Front mirror Electrically adjustable exterior mirror, left Battery 100 Ah Electronic braking system (EPB) with ABS+ASR Itedpfx Afsx Iazkefer Classic cockpit Steel compressed air tank Low compressed air unit Two-step entry Driving assistance system: stability control assistant Cab type: S ClassicSpace Cab variant: ClassicSpace Suspension: leaf / leaf Rear suspension 10.5 t Front suspension 5.1 t Cruise control system Transmission 6-speed - Type: G 90-6 AdBlue tank: 25 liters Manual sunroof (steel) Rear axle crown wheel 390 Info display 10.4 cm with additional indicator Body/chassis: chassis Fuel tank: 120 liters Engine 5.1 l - 170 kW diesel (OM 934) Engine brake Engine compartment encapsulation Wheelbase 3,560 mm Mercedes-Benz PowerShift transmission Disc brakes front and rear Seat cover/upholstery: fabric Cab seats: single passenger seat, fixed Rear fender splash guard Cabin control type Tachograph / EC control device Automatic daytime running lights Fixed rear underrun protection Optimized weight side underrun protection Front underrun protection Immobilizer Permissible gross weight 15,000 kg Special equipment: > Work lights at the rear cab wall, top > Audio system: CD radio (Bluetooth) > Exhaust pipe high-mounted behind the cab > Rear axle differential lock > Power windows > Fire extinguisher > Interior filter for construction vehicles Financing example: * Internal number: G300453 * Purchase price: €74,900.00 * Down payment: 10% * Term: 60 * Monthly rate: €1,173.11 * Residual value: €14,380.00 If you are interested in this offer or would like us to customize it to your requirements, please contact us (Mr. Enchev). We look forward to your call. Subject to errors and prior sale. We are happy to take your used vehicle in part exchange. In-house financing available. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, machine/vehicle number: 008369, X axis working area: 3100 mm Y axis working area: 1600 mm Working Table: Flat table Main Electrospindle power: 10 KW Number of controlled axes: 4 axes Itjdpfx Afjx A Tinjfsr Total number of drilling spindles: 14 Total number of tool changer positions: 6

Condition: excellent (used), Year of construction: 2010, Technical Data: Working width: 6,500 mm Max. bending capacity: 7.0 mm Max. prebending: 5.0 mm CNC control Top roll diameter: 420 mm Diameter of side rolls: 315 mm Diameter of central lower roll: 400 mm Conical bending device via tilting of the two side rolls Mobile control panel with digital display Hydraulic drop-end bearing CE marking Motor power: 22 kW Dimensions (L x W x H): approx. 9,200 x 2,350 x 1,900 mm Net weight: approx. 39 tons Additional equipment: Side bending aid Adjustable upper bending aid Condition: Very good condition, little used Operating hours: 100 h Iedpfxex Iitis Affetr The seller accepts no liability for errors in writing or data transmission. The machine is, in terms of appearance, technology, and wear, commensurate with its age; used machines are sold without any warranty.

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 7213, Country of manufacture: Switzerland Net weight: approx. 2550 kg Customs tariff number: 8458.11 20 Dimensions: 2000 x 1260 x 1950 mm TECHNICAL CHARACTERISTICS 10-axis machine – standard version 10 axes, 6 spindles: Axes and spindle designation: - 1 sliding headstock: Z1, S1 - 2 independent vertical gangs: X1Y1, S6 – X2Y2, S2 - 1 unit with 4 rotating spindles: X3Z3, S3 - 1 independent sub-spindle: Y4Z4, S4 - 1 independent rotating sub-operation axis: X4, S5 Bar feeder position: right of the operator Machine axis height: 1100 mm Main spindle travel: max. 255 mm Bar capacity: 1 to 16 mm Spindle speed: 12,000 rpm Spindle feed rate: max. 20 m/min Bar capacity, min./max.: 13 mm / 16 mm Max. workpiece length: Guide bush machining: 180 mm Collet machining: 30 mm Sub-spindle speed: 12,000 rpm Main spindle drive power: 2.2 kW (continuous) / 3.7 kW (intermittent) Sub-spindle drive power: 1.5 kW (continuous) / 2.2 kW (intermittent) Clamping collet, type: F20 (no. 76-201) Guide bush: fixed / rotating Collet for guide bush, type: Meister 605 Number of lateral tool stations, combined: Fixed: 2 x 5 Rotating: 3 + 3 Number of frontal tool stations, combined: Fixed: 4 Rotating: 3 Number of rear tool stations, combined: Fixed: 3 + 3 Rotating: 3 + 3 Tool section: 12 x 12 mm Standard revolving toolholder: ESX 20 Itedpfow T Tcwex Affsr Bar feeder: yes Part catcher: yes All technical details are provided without guarantee and subject to errors or omissions.

Condition: ready for operation (used), Festo DGPL-32-900-PPV-A-KF-B linear actuator 161793 – 8 bar, used, in good condition, 100% functional, delivery scope as shown in the photos Itedsx Ermaepfx Affsr

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1760x1150x1320 mm Itjdpfxjv A Hykj Affer Weight 1100 kg Total power requirement 4,5 kw

Condition: used, Year of construction: 2016, mileage: 83,431 km, power: 251 kW (341.26 HP), first registration: 08/2016, overall weight: 18,000 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, next inspection (TÜV): 12/2027, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, Internal vehicle number: G300446 German vehicle Available immediately at our yard in Kaufungen, Kassel More information from Luis Lucena VIAJET 6 R+L/H (Container volume 6m³) Additional camera for 6/7 m³ (maximum 2 units) Mounted on the left mirror for blind spot monitoring Cruise control for hydrostatic drive Silent version, sound insulation mats in the engine compartment RAL 2004 pure orange Drive hydrostat HS 2000 Power-enhanced blower Iedpfxex Iay He Affetr Pneumatically operated hand suction unit on discharge flap, DN 200 with manual shut-off valve, water supply and standard suction pipe, approx. 1,000 mm long LED work lights for the hand suction or rear suction system Rear suction system (detachable) on discharge flap, suction width 2,500 mm, 2 suction nozzles (each 50 x 1,250 mm) with 2 suction hoses and 4 water jets Sweeping unit right side, 250 mm, hydraulically telescopic HD unit 70 l/200 bar at the rear, spray bar with 2x7 flat jet nozzles Road washing system mounted at the front under the bumper, with standard water pump Extension for HD unit with automatic hose reel and heavy-duty hand lance (15 m hose) Additional GRP water tank approx. 1,500 l for H-version in place of the 700 l tank Synthetic resin container interior coating (dirt collection chamber and exhaust area) Financing example: * Internal reference number: G300446 * Price: €94,900.00 * Down payment: 10% * Term: 60 months * Monthly installment: €1,486.29 * Residual value: €18,380.00 If you are interested in this offer or would like it tailored to your needs, please contact us (Mr. Enchev). We look forward to your call Errors excepted We are happy to take your used vehicle in part exchange. Financing directly from our business is possible. GOLEC NUTZFAHRZEUGE GMBH We speak: German, English, Spanish, Polish, Ukrainian, Russian, Bulgarian.

Condition: used, machine/vehicle number: 008257, X axis working area: 3760 mm Iedpex A Td Sjfx Affjtr Y axis working area: 1550 mm Main Electrospindle power: 12 KW Number of controlled axes: 3 axes Total number of drilling spindles: 10 Total number of tool changer positions: 12

Condition: used, mileage: 254,374 km, power: 175 kW (237.93 HP), first registration: 04/2019, fuel type: diesel, empty load weight: 8,425 kg, maximum load weight: 3,565 kg, overall weight: 11,990 kg, axle configuration: 4x2, wheelbase: 5,360 mm, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 2, loading space length: 8,200 mm, loading space width: 2,400 mm, loading space height: 2,200 mm, Equipment: ABS, air conditioning, cabin, central locking, compressed air brake, cooling unit, cruise control, differential lock, electronic stability program (ESP), immobilizer system, onboard computer, parking sensors, power assisted steering, seat heater, soot filter, tail-lift, traction control, * German vehicle * Original 254,374 km * Condition: see photos * Body: refrigerated box, Thermo King type T800R * Cooling performance from 0° to -20°C * Operates on diesel and electric mode * Box dimensions: length 8,200 mm x width 2,400 mm x height 2,200 mm * Lashing rails on both sides * Tail lift BÄR, type BC1500S4 * Lifting capacity: 1,500 kg * Roll-off protection * Foot switch * ClassicSpace cab with 2 velour seats * Air conditioning * Driver’s seat: comfort air-sprung & heated * Automatic transmission * Hill start assist * Brake assist * Lane keeping assist * Emergency brake assist * ABS/ASR/ESP Itedpfex H Sp Rex Affjr * Reversing camera * Differential lock * Roof hatch * Exterior mirrors electrically heated and with enlarged glass * Electric windows * Radio USB AUX * Leaf-air-air suspension + raising/lowering * Multifunction steering wheel * Cruise control * Daytime running lights * Telephone pre-installation/hands-free system * Wheelbase: 5,360 mm * Gross vehicle weight (GVW): 11,990 kg * Curb weight: 8,425 kg * Payload: 3,565 kg If a new TÜV inspection is required, we will be happy to provide an offer from our partner workshops. Our offer is generally WITHOUT new TÜV inspection, without new DGUV, without new SP, and without new UVV certification. More trucks can be found on our homepage at We speak the following languages: German, English, Polish, Turkish Note: We offer and strongly recommend an inspection and examination of the goods to avoid any misunderstandings regarding condition and suitability on the part of the buyer. Inspections and examinations are possible at any time by appointment and are expressly desired. All details are given without guarantee. We accept no liability for errors or incorrect information in the offer. The buyer is obliged to independently verify the condition and equipment of the goods/vehicles. Subject to change, prior sale, and errors. - .

Condition: excellent (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 2410, Year 2001 with Fanuc Deco and 10 axes Fully inspected and partially overhauled as per report. Country of manufacture: Switzerland Net weight: 1500 kg Customs tariff number: 8458.11 20 Dimensions: 1650x1050x1850 mm TECHNICAL SPECIFICATIONS (standard execution) Headstock (Z1 axis) (+C axis optional) Maximum bar passage diameter: 10 mm Maximum workpiece length, depending on guide bush: 60/90 mm Programmable spindle speed: 0-16,000 rpm Positioned and indexed stops, increment: 0.1° Maximum spindle power: 1.1 (3.7) kW Tool post (X1/Y1) (X2/Y2) Number of turret tools (2 slides; 2 x 2 axes): 2 x 4 Tool section: 8 x 8 mm Number of transverse drilling/milling tools on turret: 4 Programmable rotation speed: 0-12,000 rpm Ijdpfjw T Tfrsx Affjtr End-working attachment (X3/Y3) Max. number of end-working tools: 3 Programmable rotation speed: 0-12,000 rpm Sub-spindle and secondary operation (X4/Z4) (+C axis optional) Maximum clamping capacity: 7 mm Programmable rotation speed: 0-16,000 rpm Positioned and indexed stops, increment: 0.1° Maximum number of secondary operations: 4 Number of fixed or rotating spindles: 4 Maximum spindle speed: 9,000 rpm Tornos-Bechler/Fanuc specific CNC control Processor type: 486 DX2 Number of simultaneous axes: 10 Machine versions 9 axes + spindle C axis and/or sub-spindle C axis All technical details are subject to verification and provided without guarantee.

Condition: new, Year of construction: 2025, KAESER compressed air tank 10000 liters standing, galvanized 16 bar include fittings Year of construction: 2025 High-quality compressed air tank in galvanized design. Galvanized inside and outside according to DIN EN ISO 1461 in immersion bath. Connecting piece for conical threads. Itodpskzizgofx Affor Technical specifications: Volume: 10000 liters Overpressure max: 16 bar -Diameter: 1600 mm Container height: 5415 mm Mass: 2550 kg Connection compressed air inlet: 2x DN 200 Connection compressed air outlet: 2x DN 200 Connection safety valve: G 2 " Connection condensate drain: G 1 1/2 " Container acceptance: RL2014 / 29 / EU Min. Operating temperature: - 10 ° C Max. Operating temperature: + 50 ° C Surface coating: galvanized For new machines comfortable leasing via our house bank possible. Visit our shop. We always have a large selection of new and used compressors in stock!

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 2150x1300x1780 mm Itsdpfjvz Egyox Affer Weight 1000 kg Total power requirement 5,5 kw

Condition: good (used), Feeder for round material, round material feeding system, round steel feeding system, motorized reel for round material for eccentric press, hydraulic press for straightening machine, wire straightening machine, unwinder straightening machine combination, unwind reel, wire unwinder, double reel, reel, unwind reel, motorized reel for wire processing, punch press, eccentric press, hydraulic press, automatic punch press, motor reel, winding reel, unwind reel, wire unwinder -Round material feeding system: Round steel feeding system with console -Feed: Drive Lenze 2.2 kW type MDXMA2M Belt tension: pneumatic -Material stress: hydraulic -Tension rollers: for Ø approx. 25 mm -Individual components: see photos -Hydraulic power unit: can be supplied for an additional charge -Transport dimensions: 900/500/H780 mm -Weight: 332 kg Iedpfx Asi Exp Ejffotr

Condition: used, Year of construction: 2000, functionality: fully functional, OKUMA LU 15M-1000 MM WITH BARFEEDER Maximum Turning Diameter: approx. 360 mm Maximum Turning Length (Z-axis travel): approx. 1000 mm Spindle Speed: up to 4,500 rpm X-axis Travel: approx. 260 mm (≈ 10.24″) Itsdexur Nwepfx Affsr Z-axis Travel: approx. 640 mm (≈ 25.2″) Power Requirement: approx. 30 kW Machine Weight: approx. 4.8 tons Turrets: Dual turrets (example: upper turret 12 positions, lower turret 8 positions) Live Tooling (M-function): Yes, on the M version

Condition: excellent (used), Year of construction: 2015, operating hours: 5,500 h, functionality: fully functional, machine/vehicle number: EL 0551, bar length: 1,200 mm, bar diameter (min.): 10 mm, bar diameter (max.): 90 mm, Emco Compact Load E65 / E45 bar feeder for bar length 1200mm. This feeder was manufactured in 2015 and runs absolutely flawlessly. Since the associated CNC lathe has been sold and the buyer already had a bar feeder, our bar feeder is now being sold separately. The feeder is compatible with various models of Emco lathes. We used it on an E45. Sale is ex location 27801 Dötlingen, plus shipping by freight forwarder. Collection is also possible. Itsdpfxexu Dg Is Affjr

Condition: good (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 3467, Country of manufacture: Switzerland Net weight: 3000 kg Customs tariff number: 8458.11 20 Dimensions: 215 x 150 x 215 cm TECHNICAL SPECIFICATIONS (standard) Headstock (Z1 axis) (+C optional) Maximum bar capacity: dia. 20 mm Maximum part length depending on type of guide bush: 200 mm Programmable spindle speed: 0–12,000 rpm Spindle positioning and indexing increment: 0.1 degree Maximum spindle power: 3.7 (5.5) kW Tool holder (X1/Y1) (X2/Y2) Number of tools on turret (2 slides; 2 x 2 axes): 2 x 5 Tool section: 16 x 16 mm Number of cross drilling/milling stations on turret: 4 Programmable rotational speed: 0–8,000 rpm End working attachment (X3/Y3) Maximum number of end working tools: 4 Programmable rotational speed: 0–8,000 rpm Sub-spindle and secondary operation (X4/Z4) (+C optional) Maximum clamping diameter: 20 mm Programmable spindle speed: 0–12,000 rpm Spindle positioning and indexing increment: 0.1 degree Maximum number of secondary operations: 7 Number of fixed or rotating spindles: 7 Itodpfsw Uczxsx Affer Maximum spindle speed: 8,000 rpm Tornos-Bechler/Fanuc dedicated CNC Processor type: 486 DX2 Number of simultaneous axes: all All technical data are provided without guarantee and subject to change and error.

Condition: used, machine/vehicle number: 005796, X axis working area: 3700 mm Y axis working area: 1550 mm Main Electrospindle power: 9 KW Number of controlled axes: 3 axes Total number of drilling spindles: 10 Ijdpfx Aohwi U Teffotr Total number of tool changer positions: 8

Condition: used, machine/vehicle number: 007564, X axis working area: 3700 mm Y axis working area: 1550 mm Working Table: Flat table Main Electrospindle power: 10 KW Number of controlled axes: 3 axes Total number of drilling spindles: 12 Isdpfx Afeum H Ekofotr Total number of tool changer positions: 13