Used Rotator for sale (7,925)

Condition: ready for operation (used), functionality: fully functional, TECHNICAL DETAILS Travel range, X-axis: 3,000 mm Travel range, Y-axis: 2,000 mm Travel range, Z-axis: 1,250 mm Travel range, W-axis (spindle stroke): 700 mm Gkodoz Ahabspfx Ak Ueb Table size: 2,000 × 1,500 mm Table load capacity: 15,000 kg Table rotation: 360° Table indexing: 1° Spindle speed: 8–800 rpm MACHINE DETAILS Position measuring system: Heidenhain linear scales EQUIPMENT Heidenhain linear scales

Condition: used, Year of construction: 1999, turning diameter over bed 280 mm turning diameter over slide rest 150 mm turning length 500 mm center height over bed 140 mm centre distance 500 mm bed width 205 mm spindle bore 40 mm turning speed range - stepless 30 - 4.000 U/min 3-jaw-chuck diameter 140 mm quick change toolholder MULTIFIX Typ A drive capacity - spindle motor 4,0 kW taper in tailstock-quill MK 3 dia. of quill 40 mm quill stroke 85 mm voltage 400 V total power requirement 7,5 kW weight of the machine ca. 800 kg dimensions of the machine ca. 1,40 x 0,95 x 1,55 m Gksdpfx Aksz Abw Hs Ujb - Serial-No.: 154 - SIEMENS 3-axis digital display - MULTIFIX quick-change tool holder - rotating centering tip

Condition: used, Year of construction: 2019, The Fanuc M-2iA/3S is a high-speed parallel-link (delta) robot designed primarily for ultra-fast picking, packing, and sorting operations in industries like food, pharmaceuticals, electronics, and consumer goods. Key Specifications Payload: 3 kg Controlled Axes: 4 axes (3 parallel axes for XYZ motion + 1 single axis for wrist rotation) Reach (Diameter × Height): 800 mm × 300 mm cylindrical motion envelope Repeatability: ±0.1 mm Gkjdpfx Akjzx Rrle Usb Robot Weight: ~115 kg Mounting Position: Inverted (ceiling-mounted above conveyor belts)

Condition: used, Used Rinsing Machine Poggio for glass bottles 6000 bph Gsdpfjwcfz Sox Ak Uskb Structural features of the used rinsing machine Poggio The Used Rinsing Machine Poggio for glass bottles 6000 bph operates with 24 grippers specifically designed to process 0.75-liter glass bottles. First of all, the machine follows a clockwise rotation and performs a single rinsing phase. Additionally, the rotating support interfaces directly with the grippers, which securely hold each bottle to ensure accurate positioning and tilting. As a result, the system optimizes the efficiency of the rinsing cycle. Moreover, engineers built the stainless steel frame to endure intensive production environments, while protective enclosures enhance safety in humid bottling areas. Treatment system and operating principles The machine performs a single rinsing cycle using only water, without relying on any chemical agents. Notably, the Used Rinsing Machine Poggio for glass bottles 6000 bph integrates a no bottle no spray system, which activates the spray only when it detects the presence of a bottle. In contrast, it disables the spray if no container is in position. Consequently, the machine avoids wasting water and conserves energy used for pumping. Furthermore, this feature—technically referred to as spray activation conditioned by bottle presence—protects the spray nozzles from premature wear. In fact, the control system operates through sensors or mechanical cams that allow spraying exclusively when the gripper locks the bottle in place. Therefore, the rinsing process remains efficient and sustainable throughout operation. Bottle format compatibility The Used Rinsing Machine Poggio for glass bottles 6000 bph supports two standard bottle formats: Bordeaux and Champagne. To clarify, the machine includes adjustable centering systems and interchangeable adapters to maintain bottle stability during tilting and rinsing. In addition, the design of the infeed star and bottle guides allows operators to change formats quickly. As a result, the machine maintains production continuity and minimizes downtime. Hence, manufacturers can easily integrate it into existing lines that require flexibility. Furthermore, its high positioning accuracy ensures smooth operation even in high-speed automated systems. Performance and production capacity This machine consistently delivers a nominal output of 6,000 bottles per hour. Thanks to its 24 grippers, the machine supports continuous operation while respecting the necessary rinsing time per unit. While variables such as water pressure, line stability, and feeding regularity may influence actual performance, the machine typically operates within standard tolerances. In other words, it remains reliable for medium-capacity bottling lines. Additionally, operators can optimize settings based on specific production requirements without compromising throughput. Industrial applications and usage contexts of the Used Rinsing Machine Poggio Industries in the wine and sparkling wine sectors commonly adopt the Used Rinsing Machine Poggio for glass bottles 6000 bph.

Condition: used, Year of construction: 2016, Used Labeling Machine BRB GLOBUS 2800 bph The Used Labeling Machine BRB GLOBUS 2800 bph, model MEGA ADE 411 CW, reliably applies self-adhesive labels to glass and PET bottles. BRB GLOBUS manufactured this machine in 2016, ensuring it remains fully operational. Moreover, it operates with a clockwise rotation system, achieving a production capacity of 2800 bph. Structural and Functional Features of the Used Labeling Machine BRB GLOBUS The Used Labeling Machine BRB GLOBUS 2800 bph measures 2500 x 1400 x 2050 mm and weighs 1500 kg, making it compact and stable for seamless integration into existing bottling lines. Furthermore, its mechanical structure maximizes operational efficiency and includes a self-adhesive full wrap-around labeling station, which fully covers each container. Gkodpfxew Am N Rs Ak Ujb Additionally, the machine’s movement system relies on mechanical cams, which precisely position containers on the rotating plates. By eliminating electronic motorization for plate movement, the design minimizes maintenance requirements and ensures long-term reliable operation. Consequently, this system enhances durability and efficiency. Supported Bottle Types and Formats The BRB GLOBUS 2800 bph labeling machine handles glass and PET bottles, including those subjected to empty bottle pressurization for PET and cans. Due to its adaptability, this versatility allows it to process various bottle formats efficiently. Supported formats include: Glass bottles: 200ml, 250ml, 330ml, 500ml, 750ml PET bottles: 500ml According to the technical manual, detailed formats include: Transparent PET: Diameter 64 mm, height 214 mm, capacity 0.5 L Transparent glass: Diameter 61 mm, height 213.5 mm, capacity 0.33 L Diameter 78.5 mm, height 286 mm, capacity 0.75 L Given these specifications, the machine supports a wide range of applications, ensuring compatibility with various production requirements. In addition, it enhances operational flexibility, making it ideal for manufacturers with multiple bottle formats. Labeling System The Used Labeling Machine BRB GLOBUS 2800 bph utilizes a self-adhesive labeling method and applies full wrap-around labels to containers. Thus, this system ensures consistent and high-quality labeling results. Operators manually adjust both the labeling system and the head position, allowing flexibility for different container sizes. At the end of the labeling process, an additional label smoothing system guarantees perfect adhesion, preventing wrinkles or imperfections that could impact the final product’s appearance. Furthermore, this smoothing mechanism enhances the visual appeal and durability of the labels. Safety and Technical Documentation The machine includes safety devices that comply with current regulations. Additionally, it comes with technical manuals and maintenance documentation, equipping operators with all necessary information for installation, operation, and routine servicing.

Condition: used, Year of construction: 2018, Used Filling Monoblock for beer 800 bph Gksdpfxew Tlz Ej Ak Ueb Monoblock Structure The Used Filling Monoblock for beer 800 bph consists of three separate units: an automatic rinser, an isobaric filler with a double vacuum system, and a crown capper. This configuration optimizes the management of rinsing, filling, and sealing phases. As a result, the system ensures suitability for processing beer in 0.5-liter glass bottles. Moreover, this modular layout facilitates maintenance and replacement, therefore increasing operational reliability. Rotary Rinser ZPC-12 The rinser in the Used Filling Monoblock for beer 800 bph operates with a continuous rotation system and uses 12 gripping clamps. First, the operating cycle handles bottle entry. Then, it performs internal rinsing with treated water, followed by dripping and final exit. The machine handles glass bottles with a height between 150 and 330 mm and a diameter between 50 and 90 mm. It processes 600 to 800 bottles per hour. The installed motor delivers 1.5 kW of power. Additionally, the design allows rapid changeovers between bottle formats, which enhances production flexibility. Isobaric Filling with Double Vacuum The BFP-12 filling unit, at the heart of the Used Filling Monoblock for beer 800 bph, includes 12 filling valves and applies an isobaric process with double vacuum. Specifically, the system performs two evacuation cycles and CO₂ reinjections before the filling stage. Consequently, it significantly reduces residual oxygen and preserves beer quality. It supports bottle volumes from 250 to 1000 ml. Furthermore, the unit integrates key components such as a Southern Pump, a Mitsubishi PLC, a THINEDA touchscreen, Korean-made sensors, and AUTONICS pneumatic systems. This machine also operates with a 1.5 kW motor. In terms of control, the electrical interface provides real-time adjustments, thus improving accuracy during production. Crown Capping Machine ZDS-3 The crown capper of the Used Filling Monoblock for beer 800 bph applies metal crown caps to glass beer bottles. The machine includes 3 capping heads and operates with a continuous rotary motion. It handles bottles up to 330 mm in height and caps with diameters from 20 to 30 mm (cP size), compatible with the normal European neck type. Notably, the capper reaches up to 1500 bottles per hour, thereby providing an operational buffer that prevents bottlenecks downstream of the filler. In comparison to standard cappers, this model delivers greater precision and cap stability. In addition, its robust frame reduces vibration during high-speed operation. Electrical Characteristics and Compatibility The machines in the Used Filling Monoblock for beer 800 bph use reliable and industry-standard electrical components. The full line features an estimated total power consumption of approximately 4.5 kW. From an integration standpoint, this makes the system suitable for facilities with medium energy capacity. The system exclusively handles 0.5-liter glass beer bottles. During operation, it performs filling under controlled pressure to preserve CO₂ levels and ensure the product’s final stability. Overall, the system delivers consistent performance, reduced oxygen pickup, and excellent packaging quality. Lastly, the compact footprint simplifies installation even in limited space environments.

Condition: used, Year of construction: 1994, Used Air Compressor Ingersoll-Rand CENTAC C100MX3-2SH 8.23 bar General Description of the Used Air Compressor Ingersoll-Rand CENTAC  The Used Air Compressor Ingersoll-Rand CENTAC C100MX3-2SH 8.23 bar efficiently meets industrial compressed air supply needs. Consequently, its advanced structure ensures reliable and continuous operation. Furthermore, a three-phase electric motor directly couples through a gear-type spacerless coupling, optimizing performance by minimizing mechanical losses and improving power transmission. This compressor belongs to the Low Pressure category, operating at a maximum pressure of 8.23 bar absolute, which is equivalent to approximately 7.23 bar relative to atmospheric pressure. As a result, its design makes it ideal for industrial applications that do not require pressures exceeding 10-15 bar, ensuring stable and efficient operation. The machine utilizes a three-stage compression configuration, which progressively increases air pressure. Additionally, each stage features combined aluminum and cast iron diffusers, while a cooling system with intercoolers at each stage and a final aftercooler enhances operational efficiency. Moreover, onboard instrumentation includes temperature and pressure transducers, ensuring continuous performance monitoring. Technical Data and Performance Gedpfxsxcwx He Ak Ujkb The Used Air Compressor Ingersoll-Rand CENTAC C100MX3-2SH 8.23 bar operates with an absolute intake pressure of 99.3 kPa, whereas its discharge pressure reaches 8.23 bar absolute. It delivers an air supply capacity of 2190 m³/h, making it highly suitable for large-scale industrial applications. Its three-phase asynchronous squirrel cage motor runs within a voltage range of 380 to 415V, at 50 Hz, providing a nominal power of 680 kW and a rotational speed of 2970 RPM. Similarly, the motor features an IP23 protection rating and Class F insulation, allowing a maximum operating temperature of 100°C. Given these specifications, a star/delta starting configuration limits the number of starts to three when cold and two when hot per hour, thereby preventing excessive thermal and mechanical stress. Structure and Components A vertically split cast iron casing enhances the machine’s robustness, facilitating easy maintenance and quick access to internal components. In particular, the Bull-Gear, constructed from AGMA 12-grade helical steel, operates with oil-lubricated hydrodynamic sleeve bearings, ensuring reliability and longevity. Furthermore, the 17-4PH stainless steel impellers feature a semi-open design with backward-leaning blades to maximize aerodynamic efficiency. In the same way, aluminum and cast iron diffusers aid in pressure recovery and maintain operational stability. The lubrication system integrates an oil reservoir coated with epoxy for corrosion resistance. Additionally, a 0.75 kW pre/post lubrication pump, operating at 380/415V, maintains continuous oil circulation, protecting moving components.

Condition: used, Year of construction: 2010, operating hours: 15,000 h, machine/vehicle number: M312, Technical Specifications and Performance Data This pre-owned monoblock is manufactured by Omar and integrates drying, capsule application, and self-adhesive labeling functions into a compact rotary system designed for professional beverage production. The machine is equipped with a double capsule applicator with rotating heads for precise capsule application and three self-adhesive labeling units for front, back, and neck labels. It is ideal for presenting high-quality wines and can be integrated into a used bottling line or as a stand-alone module in an industrial packaging environment. Manufacturer: Omar Gsdpjygh I Ujfx Ak Uekb Model: Simphony Washer-Dryer Year: 2010 Configuration: Drying module + double capsuling unit with rolling heads + 3 self-adhesive labeling stations (front/back/neck) Bottle Formats: Compatible with Bordeaux and Burgundy bottles Label Application: Pressure-sensitive (self-adhesive) for front, back, and neck Container Type: Glass bottles Format Examples: Reference capacity 0.5 L Application: Suitable for integration into beverage production lines and industrial filling Advanced Automation and Control Systems The monoblock is designed for synchronized operation of the drying, capsuling, and labeling units. The self-adhesive labeling stations ensure precise application with fine adjustment for front, back, and neck labels. The double capsuling stations with rolling heads ensure consistent finishing quality on wine capsuling units. Rapid mechanical adjustments support the changeover from Bordeaux to Burgundy bottles, improving production flexibility in existing bottling lines. Production Line Integration Capability Designed for in-line operation, the unit interfaces upstream with fillers and capping/closing machines and downstream with inspection and packaging equipment. It adapts to standard conveyor logistics, enabling smooth transfer of glass bottles. Format changes between compatible wine bottle geometries are supported, making the machine suitable for multi-SKU beverage production. Machine Condition and Maintenance History The machine has undergone a thorough restoration, which included purchase, transport, and recommissioning, resulting in a fully functional and reliable second-hand asset. It is ready for use in a production setting, suitable for rapid integration into an existing bottling line. Operational Performance and Versatility Optimized for glass wine bottles, the monoblock combines drying, precise capsule application with rolling heads, and three-point self-adhesive labeling. This configuration supports premium packaging standards and is suitable for wineries and beverage producers seeking consistent presentation quality in an industrial packaging environment. Installation Requirements and Site Preparation The rotary machine’s compact footprint allows for easy placement within typical bottling rooms. Connection to existing conveyor belts and utilities is recommended for optimal integration. The site layout must allow for safe operator access around the guards and clear spaces for format changeovers and routine maintenance. Certification of Conformity and Safety Standards The monoblock includes protective guards around the moving units, with standard operator guards and emergency stop functions typical of modern bottling...

Condition: used, Year of construction: 2004, operating hours: 28,000 h, machine/vehicle number: TP117, Technical Specifications & Performance Data The Used Tetra Cap Applicator TCA45 is a robust, single-head cap application unit from Tetra Pak®, engineered for reliable operation in beverage production environments and seamless integration within a used bottling line. Purpose-built for continuous industrial packaging, it offers steady output with precise cap application after filling and before packing. Manufacturer: Tetra Pak® Gkjdpfoyhblvjx Ak Ueb Model: TCA 45 TETRA PACK Year of manufacture: 2004 Nominal speed: up to 7,500 bricks/hour No. of heads: 1 Cap type: OEM code 4 (per manufacturer specification) Rotation direction: OEM code 0 (per manufacturer specification) Category: Capping Machine / Cap Applicator Placement: downstream Tetra Pak filling, upstream final packaging Container compatibility: Tetra Pack bricks with appropriate change parts Typical products: water, juice, beer, wine, and other still beverages Documentation: manuals available Safety: integrated safety features included Advanced Automation & Control Systems Designed around an industrial PLC with a user-friendly HMI, the TCA45 facilitates stable, repeatable cap application. Recipe-based settings support format recall, and process alarms help operators maintain consistent performance. Torque control, cap presence verification, and fault diagnostics contribute to cap quality and minimize rework in high-speed beverage production. PLC/HMI control for straightforward operation and monitoring Automatic fault detection with guided troubleshooting Integration-ready I/O for upstream filling and downstream packing synchronization Electrical: built for standard industrial power supplies (details per manual) Machine guarding with interlocked access doors and emergency stop circuits Production Line Integration Capabilities This cap applicator is well-suited to second hand or newly engineered used bottling line projects. It interfaces efficiently with infeed/outfeed conveyors, bottle orienters, fillers, and labelers, ensuring balanced line flow and minimal downtime. Compatible with Tetra pak fillers. Communication-ready for line control and buffer management Machine Condition & Maintenance History The unit is currently under maintenance, undergoing inspection and service to verify core functions and safety systems. Wear components are being checked and adjusted as needed to align with expected performance at up to 7,500 bricks/hour. OEM manuals are available to support commissioning, operation, and preventive maintenance schedules. Operational Performance & Versatility Optimized for consistent, high-quality capping, the TCA45 supports a broad mix of beverage formats common in industrial packaging. With suitable change parts, it can handle PET and glass bottles as well as aluminum containers, making it versatile for diversified production runs. Suitable applications: water, juice, beer, wine, functional drinks, and similar beverages Stable cap application to support product integrity and shelf-life Gentle handling...

Condition: used, Year of construction: 1998, Used Filling Monoblock Cerma 1998 Gedsvgupnopfx Ak Uekb The Cerma 46-MB filling monoblock is a highly efficient and reliable equipment that was manufactured in 1998. It is currently in storage, but is ready to be put back into action at any time. This monoblock is specifically designed for filling glass and PET containers with vinegar, and it uses a volumetric fill type and fixed nozzle to ensure accurate and consistent results. The monoblock is equipped with 23 valves, which help to ensure that the filling process is fast and efficient. It also has 4 capping heads for aluminum screw caps, which helps to seal the containers securely and prevent any spills or leaks. The rotation direction of the monoblock is counterclockwise. This helps to ensure smooth and seamless operation. In terms of safety, the Cerma 46-MB filling monoblock has all the necessary features to ensure the safety of operators and the integrity of the product. Manuals are also available for reference, so users can easily understand how to operate the equipment and perform any necessary maintenance. Overall, the Cerma 46-MB filling monoblock is a high-quality and reliable piece of equipment that is perfect for any business looking to fill large quantities of vinegar into containers. With its efficient filling and capping capabilities, it is sure to be a valuable asset to any production line. It weighs a total of 4200 kg, so it is a sturdy and durable piece of equipment that is built to last.

Condition: used, Year of construction: 2016, Used Filling Monoblock MITSUBISHI up to 39000 BPH It is extremely important to note that this machine is complementary to it’s rinsing machine: (click here). The Filling Monoblock Mitsubishi offers an advanced solution in the bottling sector. Specifically designed to handle a wide range of liquids, it boasts a capacity of up to 39,000 BPH. Technical Specifications of Model FHRJ80M Mitsubishi Heavy Industries Mechatronics Systems Ltd manufactured the FHRJ80M model in 2016 to meet the growing demands for speed and precision in bottling. Equipped with 80 valves, this weight-based filling system accurately doses products, significantly minimizing waste. Moreover, the system fills aluminum bottles in various sizes ranging from 0.29L to 0.41L. Thus, it showcases its versatility for handling different types of liquids such as coffee (last product that has been filled by this monoblock), liquid soap, oil, and spirits. Bottling and Capping Features Furthermore, the Mitsubishi FHRJ80M monoblock integrates a capping function with 24 heads, accommodating aluminum screw caps of 28 mm and 38 mm. Its clockwise rotation direction eases integration into existing production lines. Additionally, the precision in cap placement and swift execution ensure the process’s efficiency, which is crucial for preserving product integrity and container safety during transport and storage. Gkjdpfx Aovgvlkok Ujb Storage and Maintenance Currently stored in a warehouse, the Filling Monoblock Mitsubishi remains in excellent condition to ensure its functionality and readiness. Also, the availability of instruction manuals aids in maintenance and repair operations, which are essential for extending the machine’s lifespan and maintaining optimal performance. Integrated safety features protect operators and the machinery, thereby reducing accident risks during operation. Conclusions of the Filling Monoblock Mitsubishi Finally, the used Mitsubishi FHRJ80M filling monoblock serves as an optimal solution for those seeking efficiency and reliability in the bottling industry. Its adaptability to various formats and product types, along with the precision of its filling and capping system, make it ideal for a broad range of industrial applications. With proper maintenance and careful management, this monoblock can deliver high performance, significantly enhancing production process optimization. This model not only meets but also exceeds industry expectations in terms of functionality and performance.

Condition: refurbished (used), Year of construction: 1985, functionality: fully functional, travel distance X-axis: 1,200 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 700 mm, spindle speed (max.): 1,500 rpm, spindle speed (min.): 5 rpm, feed length X-axis: 1,200 mm, feed length Y-axis: 2,000 mm, feed length Z-axis: 700 mm, feed rate X-axis: 1,000 m/min, feed rate Y-axis: 1,000 m/min, feed rate Z-axis: 1,000 m/min, total width: 4,000 mm, San Rocco Horizontal Boring Machine Fully overhauled San Rocco horizontal boring machine, originating from a high-end aerospace manufacturing facility. The machine is equipped with a Siemens SINUMERIK 840D CNC control system with SIMODRIVE 611 drive technology. The machine is fitted with modern digital drive systems and is designed for high-precision multi-axis machining in continuous operation. It was fully overhauled in 2024, including brand-new telescopic covers on all axes, as well as numerous additional essential refurbishments to the hydraulic system, CNC components, hoses, seals, and related assemblies. Travels X-axis (longitudinal): 1,200 mm Y-axis (cross): 2,000 mm Z-axis (vertical / spindle axis): 700 mm Spindle Data Boring spindle diameter: 100 mm Tool interface: ISO 50 Milling spindle diameter: 185 mm Spindle axial travel: 700 mm Feeds and Rapid Traverses Automatic feeds (spindle and vertical axis): 2 × 1,000 mm/min Rapid traverse (spindle and vertical axis): 5,500 mm/min Distances Minimum spindle height above table: 0 mm Maximum spindle height above table: 1,500 mm Maximum distance from spindle nose to table center: 1,850 mm Spindle Speeds Torque range: 5 to 14 rpm Continuous power range: 15 to 1,450 rpm Number of gearbox ranges: 4 Speed ranges: 6–51 / 49–160 / 140–460 / 440–1,450 rpm Table Data Rotary table size: 1,100 × 1,300 mm Longitudinal travel: 1,200 mm Cross travel: 2,000 mm Table Feeds Automatic feeds X and Y: 1,000 mm/min Rapid traverse X and Y: 5,500 mm/min Table Rotation Continuous rotation: 30 to 100 degrees per minute Rapid rotation: 5,000 degrees per minute Drive System Siemens SIMODRIVE 611 E/R module 36/47 kW LT modules 108 A and 2 × 25 A Lifting and Transport Data Group 1 Steel bar Ø 70 mm, length 1,600 mm Steel bar Ø 70 mm, length 2,400 mm Four spacer rings for lifting slings Four steel slings Ø 22 mm Weight approx. 12,500 kg Group 2 Two steel slings, minimum Ø 18 mm Weight approx. 3,500 kg Group 3 Manual lifting Gkedex Rhlcspfx Ak Uob Weight approx. 1,300 kg Condition The machine is in very good technical condition and can be inspected and tested under power by appointment.

Condition: good (used), Year of construction: 2013, operating hours: 59,000 h, functionality: fully functional, Universal machining center DMU 60 eVo Travel X/Y/Z: 600 / 500 / 500 mm Rapid traverse X-axis: 80 m/min Rapid traverse Y-axis: 80 m/min Rapid traverse Z-axis: 50 m/min Speed range (standard): 20 – 14,000 rpm Motor spindle (power): 18.9 / 14 kW (40/100% duty cycle) Tool holder (standard): SK40 according to DIN 69871 NC swivel rotary table: yes Clamping surface (table): 600 × 500 mm Swivel range B-axis: −5° to +110° C-axis: 360° Loading weight: 400 kg Direct measuring systems: equipped (direct measuring systems / direct length measuring system) Table cooling: incl. table cooling (mentioned in connection with direct measuring systems) Spindle speed (option): 20 – 18,000 rpm (for tool holder HSK-A63 according to DIN 69893) Adjustment of working spindle and tool magazine: deviating from standard Spindle speed (max., further data sheet screenshot): 24,000 rpm Tool magazine (standard): chain magazine, 30 positions, double gripper Tool magazine (option): tool magazine with 60 positions, chain magazine with double gripper (deviating from standard) CNC control (3D control): Heidenhain iTNC 530 HSCI Operating interface: SmarT.NC Control panel: DMG ERGOline® Control Display: 19" monitor (for ERGOline Control) Heat exchanger: for spindle and table Active cooler: for control cabinet Full enclosure: yes Signal/indicator light: four-color (also noted under automation) Measuring probe: infrared probe, Heidenhain TS 649 DMG Preparation for 3D quickSET toolkits: available 3D quickSET software option: included (for one machine each) 5-axis machine configurations: only in conjunction with probe option Preparation for handling system: PH 150-8 of DMG Automation (preparation mentioned) Chip conveyor: scraper belt chip conveyor with cleaned gap screen Internal coolant supply (IKZ): available Paper strip filter: 40 bar / 23 l/min / 600 l tank Rotating viewing window: incl. rotating viewing window Purge air: available Linear measuring systems: available Bed flushing: available Flushing gun for chip removal: available Blow air through spindle center: selectable via M function Compressed air quality: maintained air with low oil content Power failure safety package: available Surge protector: available Undervoltage monitoring: with fast braking control Operating mode: 4 Process monitoring: during production Documentation: Documentation-1 German Screen texts: German/English DMG / MORI SEIKI Messenger (promotional offer): Connection of the first machine (SIE 840D; HDH iTNC530; HDH MillPlus iT) DMG Netservice – client: "Green light for your machine"; installation on external PC Automation PH 150-8 with handling system and pallet magazine Automation design: System in automation design, matching the machine Rotary pallet storage: with 8 pallet positions Servo axes: 2 servo axes (X-axis, magazine table) Z-axis: pneumatic Gripper: grab arm/fork Basic programming: System basic programming IPC: IPC with touch panel Gjdpfx Akeyl A Dno Uskb Job manager: DMG AUTOMATION Job manager Operator guidance: graphic-based operator guidance Signal light: 4-color PH 150-8 integration kit: for DMU 50/70, DMU 40/60/80 eVo linear UPC P chuck: Erowa (UPC P chuck, Erowa) UPC pallets: 320 × 320 mm, incl. clamping pins and pallet coupling, Erowa

Condition: used, Year of construction: 1995, Used Filling Monoblock FIMER 16-1 up to 3500 BPH Introduction to the Filling Monoblock FIMER 16-1 The Used Filling Monoblock FIMER 16-1 excels in the bottling industry with its impressive production capacity of up to 3500 bottles per hour (BPH). Originally designed in 1995, this machinery combines robust construction with advanced technology, thereby establishing itself as a top choice for companies that prioritize efficiency without compromise. Technical Specifications Gedpfsvgvlwsx Ak Uekb Equipped with 16 valves, this monoblock operates using a gravity or light depression filling system. Ideally, it minimizes foam formation and ensures even filling. This type of monoblock works perfectly for fillining spitrits and still wines. Moreover, the system adapts seamlessly to bottle sizes of 0.70 L and 1.0 L, significantly enhancing production line versatility. Components and Operation Furthermore, the capping system of the Filling Monoblock FIMER 16-1 employs a fixed nozzle, specifically designed for T-stoppers. The capping head effectively manages 21 mm diameter caps, securing a reliable and high-quality seal crucial for preserving the bottled contents. Configuration and Maintenance Currently, the Monoblock, still in production, demonstrates significant reliability and maintenance ease. Its design incorporates a clockwise rotation, an important consideration for integrating the machinery into existing lines to optimize workflow. Efficiency and Sustainability Additionally, this Filling Monoblock not only achieves high efficiency in production capacity but also adheres to sustainability standards by minimizing material waste. Consequently, this feature becomes increasingly vital for companies committed to reducing their environmental impact. Final Considerations of the Filling Monoblock FIMER 16-1 Employing the Filling Monoblock FIMER 16-1 reflects a commitment to maintaining high-quality and efficiency standards in the bottling industry. Its proven reliability, combined with modern maintenance practices, ensures that this machine remains essential for any bottling operation striving for excellence. Ultimately, investing in a system like this Filling Monoblock  is a wise decision for the future of production.

Condition: used, Year of construction: 1999, Used Palletizer KETTNER Robogrip up to 2200 box/hour This Robogrip offers, indeed, a reliable and robust solution for the bottling and packaging industry. Notably, KETTNER manufactured this machine in 1999, specifically designing it to deliver up to 2200 boxes per hour, which makes it ideal for high-productivity lines. Moreover, this robotic palletizer utilizes a rotating arm to handle cartons, ensuring precision and stability throughout each loading and unloading cycle. Technical Specifications and Operating Mode of the KETTNER Robogrip As for the Robogrip model, it palletizes cartons using a rotating arm system. Consequently, this system enables rapid and stable handling of containers by gripping the boxes with a dedicated gripper system. The machine’s mechanical structure and robotic components further deliver smooth, controlled movement, thereby minimizing any risk of damage to products during the positioning phase. Precision and Efficiency of the Robotic Palletizer The Used Palletizer KETTNER Robogrip up to 2200 box/hour, in particular, securely grips cartons to ensure accuracy in arranging each layer. Additionally, its rotating arm works across multiple angles, effectively facilitating the packaging process while maintaining high quality. This gripping and rotation technology, therefore, handles high loads efficiently, maximizing production time. Layering Capacity and Padding Systems Interestingly, the palettizet includes a layering and padding system that inserts layers between cartons to boost stability and security during transport. Furthermore, this system operates automatically and lets operators adjust layer height and density to meet specific production needs. Gjdevirzaspfx Ak Uekb Advantages of a Used High-Speed Palletizer Not only does a used palletizer like the KETTNER Robogrip offer companies a cost-effective way to boost production capacity, but it also eliminates the need for new machinery. As a result, this model reaches speeds of up to 2200 boxes per hour, consistently meeting high operational standards while saving on initial purchase costs. Its durability and quality from 1999, on the other hand, make it highly suited for today’s industry, where speed and precision are crucial. Maintenance and Durability of the KETTNER Robogrip Despite its age, this machine continues to perform reliably over time, primarily due to its sturdy construction and high-quality KETTNER components. Routine maintenance on this robotic palletizer, as a rule, involves regular calibration of the grippers and rotation system, thereby ensuring optimal performance even after extended use.

Condition: used, Year of construction: 2005, operating hours: 35,000 h, Used Bottle Labeling Machine SACMI OPERA RA 720 8T S3 up to 6,000 bph The used SACMI OPERA RA 720 8T S3 bottle labeling machine can reach speeds of up to 6,000 bottles per hour. It is an efficient and reliable solution for those who need to label large volumes of bottles quickly and accurately. The SACMI OPERA RA 720 8T S3 machine, built in 2005, is in excellent condition and has recently passed an independent inspection certifying its proper functionality. This means it is in reliable condition and ready for use, guaranteeing optimal performance. The used SACMI OPERA RA 720 8T S3 bottle labeler is equipped with three labeling stations: front, back, and medallion. It also features mechanical adjustment of the adhesive stations, allowing for easy adjustments for precise and customized labeling. Gksdpfxsw Iy Dqs Ak Uob How versatile is this used labeling machine? This used SACMI OPERA RA 720 8T S3 is highly versatile: it can work with different bottle sizes and, thanks to the electronically controlled cams, can be programmed to perform as many rotations as necessary. This allows for the application of labels of various sizes on the bottle walls, making it suitable for a variety of production needs. Furthermore, its energy consumption is approximately 6 kW, and the inlet is on the left, making it an hourly machine. The used SACMI OPERA RA 720 8T S3 bottle labeler, up to 6,000 bottles per hour, can also be configured for an optical centering system to be connected to the current electronic cam. This would allow bottles to be oriented and centered according to precise labeling patterns aligned with various bottle wrapping patterns. Many other equipment options can be created to apply new labels to new bottle formats chosen by the prospective buyer.

Condition: used, Year of construction: 2004, operating hours: 55,000 h, Krones Flat Water Filling Monoblock 2004 KRONES TRIBLOC filling machine with CIP and CTA and HEUFT BOTTLE INSPECTOR. Product type: Non-carbonated water, non-carbonated fruit juices. Rinsing Machine Brand : KRONES Model: Variojet 2,160-54-126 Rinse heads: 54 Wheelbase: 126 Year: 2004/2005 Filling Machine Brand : KRONES Model: SENSOMETIC VP-G-PET 4,320-108-126 Filling valves: 108 Pitch: 126 mm Product: non-carbonated water Sizes: USED FOR 2.0 liters. Can also fill 0.5, 1.0 L and 1.5Lt. Capacity: 30000 b/h Effective size: 2.0 L PET Neck: 30/26 Maximum possible height of the container: 350.00 mm Minimum possible height of the container: 150.00 mm Direction of rotation of the carousel after clockwise entry (from left to right) Year: 2004 With stainless steel KRONES cleanroom housing Capping Machine of Krones triblock Brand: ZALKIN Number of heads: 18 Neck: 30/26 CIP Year: 2004 Voltage 230/400 V Frequency 50 Hz CAT – CTA – CONTROLLED AIR TEMPERATURE Brand: CIAT Year: 2009 Controls the air temperature inside the KRONES CLEAN chamber to maintain the same temperature and also for clean room over-presurization. Gsdpjvgugtofx Ak Uokb FILL LEVEL INSPECTOR Brand: HEUFT Krones Used Filling Monoblock for Still Water –  IMMEDIATELY AVAILABLE – AND READY FOR PACKING AND SHIPPING! We can assist your company both in disassembly and assembly, we have competent staff and able to use the correct technology to reinstall this krones equipment. We can carry out a complete project of reinstallation and start-up of production with replacement of every damaged part or to be changed. We need about 1500 square meters for the entire bottling line, with the current layout. The disassembly work requires at least 30 days to be carried out carefully and marking all the cables and mechanical parts. All the programs are downloaded to ensure that no information is lost.

Condition: used, Year of construction: 2009, total width: 1,400 mm, total length: 2,000 mm, total height: 1,200 mm, Colour: Blue Empty weight: 700 kg - Year: 2009 Gsdpsy Uxmrjfx Ak Uekb - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: Avi-300 - Main motor power [kW]: 22 - Rotation speed [rpm]: 1465 - Connection diameter [mm]: 500 - Rotor material: Metal - Voltage [V]: 400 - Current consumption [A]: 41.5 - Fuse [A]: 63 - Power [kW]: 22.0 - Transport dimensions: 2000mm x 1400mm x 1200mm (l x w x h) - Transport weight [kg]: 700kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, Year of construction: 2023, Overview This Robopac Genesis Futura HS pallet winder was built in 2023. It has under 500 operating hours - technically close to new. The rotating ring carries the pre-stretch carriage around the stationary pallet for high throughput without moving the load (see Capacity below). Delivered as a stand-alone unit with integrated roller conveyor, prepared for line integration over Ethernet TCP/IP. Technical data - Manufacturer: Robopac - Model: Genesis Futura HS - Year of manufacture: 2023 - Machine type: automatic rotating-ring stretch wrapper (pallet winder) - Operating hours: less than 500 h - Capacity: up to 92 pallets/h (13 wraps, H 1,000 mm), 77 pallets/h (17 wraps, H 1,600 mm), 70 pallets/h (19 wraps, H 2,000 mm) - Pallet size: 800 x 1,200 mm - Load height: 1,000 - 2,000 mm (incl. pallet) - Load weight: 100 - 1,200 kg - Conveyor height: approx. 550 mm; speed 15 m/min - Machine height: approx. 4,862 mm; hall height from 7,000 mm - Pre-stretch: SCV-B carriage, electronically adjustable 150 - 400 % - Stretch film: LDPE / LLDPE, 17 - 23 µm, roll width 500 mm, max. diameter 250 mm, core 76 mm, max. weight 20 kg - Control: Siemens SIMATIC S7-1200 PLC, Siemens TP700 7" colour touch panel - Wrapping programs: 15 (expandable to 64), 12 steps/recipe, 4 password-protected access levels - Power supply: 400 V / 50 Hz, TN-S, control voltage 24 VDC - Compressed air: 6 bar, dry, oil-free - Documentation and HMI languages: German / English Equipment - High-speed rotating ring: power transfer to the pre-stretch carriage via sliding contacts, Wi-Fi commands - Integrated roller conveyor with pneumatic pallet lifting station (SMC PL-D) - Automatic film clamping, cutting and wide-band sealing unit - Fixed vertical hold-down (top press unit) stabilises the load during wrapping - Roping device gathers the film web from below - Photocell for automatic pallet-height reading, plus a pre-scan photocell with 3,800 mm reflector mast - Inverter-controlled IE3 motors, SEW geared, IP55, FESTO pneumatic components, SICK photocells - Siemens Scalance S615 VPN / firewall router and Scalance XB005 Ethernet switch, TCP/IP link to up-/downstream machines - Safety: Reer Safegate SMPO 1803 light curtain, fenced enclosure, dynamic fall protection on the ring - Operator panel separate from the main switch cabinet, plus remote control unit with emergency stop - R-Connect remote monitoring hardware: cloud portal for production data and teleservice - TPM package (centralised lubrication points, maintenance intervals on display), integrated HMI troubleshooting - Complete documentation on USB stick and in print: operating / maintenance manual, wiring / pneumatic diagrams, spare parts catalogue, layout Godpfx Aszzz R Dek Uekb Condition Used - almost as new, no visible production wear. Still installed and under power; inspection in operation on request. Sold without warranty. Availability Immediately. Location: Germany. Handed over dismantled and packed (EXW).

Condition: used, Vertical grinding machine, surface grinding machine DORMAC / DORIA type Perseo Cup grinding machine No. 786 Year of manufacture 1987 Sanding area 500 x 250 mm Magnet 400 x 150 mm Grinding height grinding wheel - magnet approx. 190 mm Grinding height grinding wheel - clamping surface table approx. 235 mm Grinding wheel diameter 175 mm Table longitudinal movement approx. 600 mm Grinding wheel speed approx. 2800 rpm Motor power approx. 2.2 kW Mains connection 380 Volt, 50 Hz - Manual depth adjustment via handwheel, travel per handwheel rotation, Z-axis 2.5 mm = 0.01 mm per graduation mark - handwheel on the right of the spindle housing, fine adjustment via knurled wheel on the handwheel - Manual transverse adjustment via handwheel, travel per handwheel revolution, Y-axis 2 mm = 0.01 mm per graduation mark - Hydraulic longitudinal table movement - mechanical magnet WAGNER, type 0112N-15/40-4 400 x 150 mm, height 45 mm - Wet grinding unit with settling filter opposite - 2 grinding wheels Ø 175 mm - 1 grinding wheel holder Gjdpfsvkgvhex Ak Uokb - 1 balancing device for the grinding wheels Space requirement L x W x H 1500 x 1100 x 1800 mm Weight 570 kg good condition

Condition: used, Year of construction: 2012, Centramec Oktabinwender Mk2 — Technical Data Manufacturer: Centramec AB Model: Oktabinwender Mk2 (Octabin Turner/Tipper Mk2) Document ref.: H-KU 0032g(DE), Rev. E.K., dated 2012-11-05 Pallet / Octabin capacity: Pallet size: container pallet 1140 x 1140 x 160 mm, four-way pallet Octabin min. height (incl. pallet): 1390 mm Octabin max. height (incl. pallet): 2590 mm Max. weight (incl. pallet): 1200 kg Electrical connection: Supply: 400 V AC, 6 A Protection class: IP55 Terminals: L1, L2, L3 Pneumatic connection: Pressure: 6 bar Connection size: 8–12 mm Air consumption: approx. 20 l/stroke Dimensions (stand): Height: 3592 mm Width: 1906 mm Depth: 2554 mm Weight: Stand weight: approx. 2300 kg Noise level: Below 70 dB(A) Installation / space requirement: Gjdpfozz N U Rox Ak Uokb Height: 3500 mm Width: 4000 mm Depth: 3000 mm Fixing: 4x4 M16 expander bolts, length 100 mm, machine must be anchored level to the floor Handling features: Control console with rotate and lift functions, plus stop button Lifting eyes and fork support for forklift/crane transport Pallet lock engages during rotation, holds pallet until turner rotates back 180° rotation of hood + octabin around a turning disc

Condition: used, functionality: fully functional, In this listing, you are purchasing a second-hand “Plockmatic SD-500” booklet-making system Item for sale: 1 x Plockmatic SD-500 with the following equipment: incl. SD BM Booklet Maker incl. SD-BF Bookfold incl. SD RCT Rotate Crease Trim incl. SD-BF Bookfold Gksdpfjzz Rp Ajx Ak Uob Meter readings: Total: Approx. 4187 Condition: This listing is for a second-hand machine, which may show signs of wear (minor scratches or yellowing). The machine has been tested to ensure it is in working order Packaging and dispatch: You are welcome to view the machine during our opening hours. Please arrange an appointment to do so! Sea-worthy packaging and worldwide dispatch available on request! A functional test will be recorded on video for you prior to dispatch or collection. For further information, please feel free to contact us directly.

Condition: new, cutting width max. 310 mm Cutting height max. 125 mm Saw blade diameter 500 mm Motor output 5,5 kW Speed 2.800 U/min. Required air-pressure 6-8 bar Working height 900 +/- 20 mm Dimensions (L/W/H) 10645x1000x1300 mm SALVAMAC COMBO 500 – The semi-automatic miter saw with SALVASTOP 100 - electronic length stop/slider ----- - Pos. 1: Legend 500 under table miter saw ----- - Maximum cutting area: 220x125/ 260x100/285x80/310x50 mm. When cutting boards that are on top of each other, h max. 100 mm. The structure is made entirely of thick-walled and reinforced full-surface painted steel. Solid floor mounting system with flanged steel feet for the mounting hole. Bimanual safety cut control in ergonomic position. Motor power of the saw motor 5.5 kW. Adjustable cutting speed via a pneumatic controller. Maximum system for weight balancing and longevity. Shock absorbing system. Independent pneumatic adjustment options to adapt to different types of processing. Durable and easily replaceable saw blade adjustment bar. HM circular saw blade, diameter 500 mm, Z=108. Pneumatic upper workpiece clamping press with electro-pneumatic control. Presser movement system using new ball bearings with double dust protection and automatic lubrication system. CE compliant electrical system. The CE models must come standard with at least 1 meter long support plates at the inlet and outlet. Technical specifications: ----- Saw cross-section max. mm. 220x125, 260x100, 285x80, 310x50 Saw blade motor power: 5.5 kW Saw blade diameter: 500 mm Saw blade type: HM Z=108 Saw blade rotation speed: 2800 rpm Air consumption per cycle: 7 Nl Gedpfx Akevu Hd To Uskb Intake manifold: 1 - 120 mm / 1 - 100 mm Air pressure: 6 - 8 bar Voltage: V 400/50Hz 3-phase Worktop height: 900 mm +- 20 mm Colour: Ral 7035 - Ral 1007 Pos. 2: Salvastop 100 electronic length stop ----- - - Working method: 2 modes 1 x stop (length stop moves to the specified length) and 1 x slide (several lengths are processed one after the other at the push of a button) - with servo drive - Ram speed: up to 60 m/min - slider length 600 mm - with a 7'' touch display - maximum weight of logs that can be pushed - up to 100 kg - USB connection COMBO_500 - 6400/7000 - Roller conveyor with guide to the right of the saw. Painted steel frame with galvanized castors. Load capacity 230 kg, diameter 60 mm, spacing 250 mm, width 320 mm. 3 m. - 6400/7000 SalvaStop 100 to the left of the saw. Working length 6.4 m. Total length 7.0 m. With table top 7 m. Width 320 mm. Demonstration machine additionally equipped with: UP & DOWN FRONT PROTECTION Movable instead of rigid front protection. The guard rises during cutting to ensure safe working conditions. Loading and unloading wood is simplified with the downward-facing guard. The system has another special, secured pneumatic system with linear guidance, which impresses with top quality and cutting-edge technology. SOFTWARE LINK FILES Preparation for data import via a Salvamac file template in CSV format. ----- Total price demonstration machine from stock 73447 Oberkochen: on request! ----- More options like longer/shorter inlet/outlet, Stop systems on re...

Condition: used, maximum load weight: 13,609 kg, overall weight: 16,000 kg, first registration: 01/2017, loading space length: 7,300 mm, loading space width: 2,480 mm, loading space height: 2,470 mm, loading space volume: 45 m³, total length: 7,450 mm, total width: 2,550 mm, total height: 2,750 mm, Year of construction: 2017, Container No. G0123196 – Manufacturer: Kögel. * Sliding roof tarpaulin * Double corner fittings * Insertion strip (wood) * Multi-hole strip * Portal door with double rotating bar locks (inside) * Side sliding tarpaulin * Forklift accessible * Fixed support legs * Device for rail loading * Lashing recesses * Lashing points * Perforated pallet stop strip Storage container – weatherproof, securely sealed, floor in good condition, no further repairs required. Delivery time: IMMEDIATELY. Multi-lock outer frame. Substructure with signs of wear, partially with some surface rust. Isolated paint flaking on components of the swap body. Isolated surface rust on components of the swap body. Deformations/stops on components – see pictures. Swap container with lettering (see photos). Dimensions are approximate. Offer subject to change; prior sale reserved. Prices are net ex works D-59302 Oelde. Further details upon request, please contact us by phone or email. Gksdpszz Uxhjfx Ak Ujb

Condition: new, Year of construction: 2025, neu 2025 020156 prompt, Zwischenverkauf v Türkei 6720 € 129.7 € 1 250 kg 205 kg 150 mm 150 mm 360 ° 360 kgm 230 / 50 V / Hz 0.37 kW 0.25 kW 0.1 - 3 U/min 30 s 600 mm M16x6 mm Gjdpfx Akox Urqks Uskb 550 mm 1000 mm 700 mm 1700 mm The positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg. The frame is optimally designed for rotation and tilting operations. The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected. For heavy workpieces, the positioners are mounted on the floor. The tables have radial T-slots that enable quick clamping of the workpieces. Tilting and rotation are controlled by steel gears. For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. Foot pedal Cable for signal to welder Touchpanel for following functions: - rotation speed - operating modi (manual, segmentcycle, full circle) INCL. FOLLOWING OPTION: Pneumatic centering attachement