Telehandler rotating

Manitou MRT 3060 Vision + AC

Condition: excellent (used), Year of construction: 2005, travel distance X-axis: 600 mm, travel distance Y-axis: 450 mm, travel distance Z-axis: 400 mm, rapid traverse X-axis: 35,000 m/min, rapid traverse Y-axis: 35,000 m/min, rapid traverse Z-axis: 35,000 m/min, workpiece weight (max.): 200 kg, total length: 500 mm, total width: 400 mm, table load: 200 kg, rotary table diameter: 280 mm, Coolant system Filtration tank HR 410 Handwheel iTNC530 controller 1e owner machine X - Travel: 600mm Y - Travel: 450mm Z - Travel: 400mm A - Axis: 110° B - Axis: 360° Table Length: 500mm Table Width: 400mm Table load: 200 Table Ø: 280mm Feed rate X-Axis: 35000mm/min. Feed rate Y-Axis: 35000mm/min. Feed rate Z-Axis: 35000mm/min. Feed rate A-Axis: 10Degrees/min Feed rate B-Axis: 15Degrees/min Spindle Taper: 40ISO/Bt/Mk Power on spindle: 15kW Speeds / ranges: 18000Rpm ATC / revolver: 30 Coolant through spindle / Bar:20 Number of controlled axis: 5 Chip conveyor: Yes Coolantsystem: Yes Length: 3500mm Width: 3500mm Kwodex R S Smspfx Ad Net Height: 2800mm Weight: 6600kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: new, machine/vehicle number: wtcs750s, Westtech Woodcracker CS750 Smart - available immediately Equipment: - Tiltator can be rotated continuously - Cutting diameter: 750 mm - Grab opening width: 1,280 mm - Own weight (basic - fully equipped): 820 - 980 kg - Recommended liter output: 65 - 110 l/min - Recommended operating pressure: 230 -280 bar - Service weight of carrier vehicle: 15 - 30 t - Saw box: actively suspended - Chain lubrication of saw: grease - Optional: Power tiltator can be rotated continuously Available in multiples / fits perfectly with Magni RTH 6.30 SH & Magni RTH 6.35 SH. Can also be offered in conjunction with a Magni. Also fits Merlo. We are an official Westtech Woodcracker sales and service partner, Magni telehandler sales and service partner, JCB construction machinery sales and service partner, Mercedes-Benz service partner, Iveco service partner and, with 800 used vehicles, one of the largest commercial vehicle dealers in Germany. Kedpfeiady Ejx Ad Nowt We supply the complete Westtech Woodcracker range for you!

Condition: excellent (used), Year of construction: 2014, First commissioning: 2014 Control: Heidenhain iTNC 530 HSCI including HR 520 handwheel Machine hours Power-on hours: approx. 90,000 h Spindle hours: approx. 38,000 h Current milling spindle hours: approx. 900 h Travel distances X-axis: approx. 2,500 mm Y-axis: approx. 3,000 mm Z-axis: approx. 1,250 mm A-axis: ± 110° C-axis: ± 300° Clamping table Clamping surface: approx. 2,500 x 3,250 x 600 mm 2-axis milling head VH30 Spindle power: 60 kW Spindle speed: max. 22,000 rpm Torque: 95 Nm Kwodpfswywcisx Ad Nst Tool holder: HSK 63A Tool clamping: hydraulic Coolant supply: external and internal Linear axis drives Feed speed X/Y/Z-axis: up to 60 m/min Axis acceleration X/Y/Z-axis: up to 5 m/s² Electrical specifications Connected load: 190 kVA Main fuse: approx. 315 A Dimensions, weights Space requirement (machine with peripherals): approx. 10,000 x 8,000 x 5,650 mm Total weight: approx. 63,000 kg Colour Enclosure, portal, control cabinet: RAL 7035 light grey Milling head and applications: RAL 6038 luminous green Description: Additional equipment - Coolant supply with belt filter system - 50-position chain-type tool changer - Work area enclosure - Chip conveyor - Emulsion mist extraction system from LTA Optional at extra cost: - Renishaw RMP60 wireless measuring probe - BLUM Control NT Condition of the machine Fully functional, in excellent condition and available for inspection under power! Images are sample photos from a new machine of this type. Original images to follow shortly!

Condition: used, Year of construction: 2016, operating hours: 2,700 h, fuel type: diesel, mast type: telescopic, Machine ready to work Feel free to contact me Kwsdpfxeuqu Rie Ad Njt

Condition: used, Year of construction: 2009, functionality: unexamined, machine/vehicle number: 73136, travel distance X-axis: 1,350 mm, travel distance Y-axis: 1,150 mm, travel distance Z-axis: 720 mm, nominal power (apparent): 64 kVA, controller manufacturer: Heidenhain, controller model: iTNC 530, total height: 3,150 mm, total length: 5,605 mm, total width: 4,290 mm, overall weight: 12,600 kg, spindle speed (min.): 15,000 rpm, operating hours of spindle: 21,786 h, number of slots in tool magazine: 46, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, +GF+ MIKRON HPM 1350U – 5-Axis Machining Center (Year of Manufacture 2009) Used 5-axis milling machine MIKRON HPM 1350U from 2009. The machine is in operational condition and comes from ongoing production. Equipped with Heidenhain iTNC 530 control, rotary table Ø 1100 mm, 46-position tool magazine, and Renishaw OMP60 touch probe. Operating Hours (Readout): Control powered on: approx. 112,194 h Machine powered on: approx. 72,272 h Spindle running: approx. 21,786 h Programs: approx. 21,654 h Condition: Used machine with normal signs of use, technically operational. Inspection under power possible by arrangement. Work Areas Travels: X-axis: 1,350 mm Y-axis: 1,150 mm Z-axis: 720 mm (vertical spindle) / 895 mm (horizontal spindle) Spindle Standard spindle 15,000 rpm Speed range: 0–15,000 rpm Acceleration to max. speed: approx. 2.5 s Power: 38 kW (S6 = 40% duty cycle, TS = 2 min) Torque: 193 Nm (S6 = 40% duty cycle) Tool holder: HSK-A63 (DIN 69063-1, option ISO-B40/DIN 69871) Max. tool diameter: 130 mm (fully equipped) Bearing: Ceramic hybrid Ø 70 / Cronidur steel Lubrication: Lifetime lubricated Kedpfx Aex Eh Iqsd Newt Cooling: Water-cooled with corrosion inhibitor Feed Drives Feed motors: AC Rapid traverse / working feed: 32 m/min (20% duty cycle) 10 m/min (100% duty cycle) max. 15 m/min (40% duty cycle/hour) Position measuring systems X/Y/Z: Linear scales (direct) Rotary Table Clamping surface: Ø 1100 × 1000 mm, flattened on the side Table load: 1,600 kg T-slots: 8 × 18H12 + 1 alignment slot 18H7 (100 mm pitch) Centering bore: Ø 50 H6 Clamping torque: 8,000 Nm Max. mass moment of inertia: 75 kg·m² Table elevation above floor: 1,120 mm Table drive: Direct torque motor Drive torque: 1,600 Nm (40% duty cycle, 2 min) Swivel Axis (A-axis) NC swivel range: +16° to −120° Measuring system: direct, absolute Clamping principle: hydraulic, stepless Max. swivel speed: 4,000 °/min Max. working swivel torque: 600 Nm (S6 40%) Swivel time 0° → 90°: 0.9 s Tool Magazine / Changer 46-position magazine (installed as per documentation) Magazine positions: 46 Tool holder: HSK-A63 (DIN 69063-1), option ISO-B40 Max. tool diameter: 80 mm (fully loaded) 130 mm (partially loaded) Max. tool length: 300 mm Max. tool weight: 8 kg Magazine loading: 200 kg Tool change time (vertical): 11 s Coolant / Chip Disposal External coolant supply (AKZ): 40 l/min, 2.5 bar Internal coolant supply (IKZ) Electrical Data: Installed rated power: 75 kW Connection power: 58 kW Connected load: 64 kVA Control voltage: 24 V DC Operating voltage: 3 × 400 V, 50 Hz Protection class: IP54 Dimensions & Weight Machine weight: approx. 12,600 kg (without accessories) Required space (L × W × H): 5,605 × 4,290 × 3,150 mm

Condition: new, Year of construction: 2022, load capacity: 6,000 kg, lifting height: 30,000 mm, fuel type: diesel, construction height: 3,100 mm, gearing type: automatic, KEY FACTORS - Elevating cab! - Westtech WOODCRACKER® CS 750 Smart (cutting diameter 75cm) - Front screen guard - Closed mast - Mast scraper for the extensions - LED headlights on mast and cab Kwsdpfxjik S Ilj Ad Not - Camera system (camera on mast front, side and rear on counterweight) - Extended radio remote control with saw function and support - 40 Km/h or 20 Km/h - Vibration damper - Support plates with bracket, EQUIPMENT - Maintenance-free wet multi-disc brakes in front and rear axle -Comfort seat with weight adjustment and armrests - Spacious pressurized cab with air conditioning + heating - Operation via the clear 10-inch touch pad and navigation button - ROPS/FOPS cab with optimum all-round visibility - 360° endless rotation - 12 V connection in cab - automatic leveling of the scissor supports - Attachment recognition - Levelling ? Levelling system on wheels - Lighting according to StVZO - TÜV package + TÜV approval - Individualization of manoeuvres - Fork carriage with forks 1,200 mm AREAS OF APPLICATION - Safe removal of trees in sections. - Special tree removal in urban areas or settlements. - Maintenance work along roads and routes. - Problem tree felling. - Tree felling on slopes and embankments - Ideal for use in municipal areas - Removal of storm damage - Traffic safety and road safety EXCLUSIVE: THE MAGNI RTH 6.30 SH / 6.35 SH WITH WESTTECH WOODCRACKER® CS 750 SMART is available exclusively from us at Stefan Ebert GmbH in Burghaun, We are an official Magni telescopic handler sales and service partner, Westtech Woodcracker sales and service partner, JCB construction machinery sales and service partner, Mercedes-Benz service partner, Iveco service partner and, with 800 used vehicles, one of the largest commercial vehicle dealers in Germany, We supply the complete Westtech Woodcracker program for you! On request, we can provide you with a leasing or financing offer from Mercedes-Benz Bank, For further information, please visit our homepage, Subject to errors and prior sale!

Condition: good (used), Year of construction: 2009, Ref. -No.: 10556 Manufacturer: DMG MORI Type: DMC 60 FD Year of construction: 2009 Type of control: CNC Control: Siemens 840DSL-721 Storage location: Halberstadt Country of origin: Germany X-Travel: 630 mm Y-Travel: 800 mm Z-Travel: 850 mm Max. Workpiece diameter: 600 mm Max. Workpiece Weight: 400 kg Turning Speeds: 12000 RPM Tool changer: 60 Max. Workpiece height: 500 mm Weight Of The Machine Ca.: 10 t Numbers Of Pallets: 2 Kwodpfxjxc Tt Te Ad Not Motor spindle: 24000 RPM Further information: - Internal cooling - Swivel range of the B-axis -5/ +110° - Cooled table console, table bearings and motors - Cooled bearing blocks and spindle nuts of the ball screw drives - Cooled guides in the linear axes X/Y/Z - Drive power: 100%ED/40%ED 24 KW/35 KW - Chip conveyor - Internal coolant supply - Electric handwheel - Rotary function Rotary table - Operating mode 4 - 2 pallets ø 630 mm - Rotary pallet changer - IKZ 40bar , 980 liters, paper belt filter - Dsc Htetzywvjlwwxokp - Measuring probe Heidenhain - 3D Quickset Machine can be inspected under power by arrangement.

Condition: new, functionality: fully functional, machine/vehicle number: HR15149, Year of construction: 2025, load capacity: 7,000 kg, lifting height: 34,700 mm, fuel type: diesel, mast type: telescopic, construction height: 3,260 mm, power: 155 kW (210.74 HP), fork carriage width: 2,000 mm, fork length: 1,200 mm, empty load weight: 24,000 kg, total length: 8,860 mm, drive type: Diesel, construction width: 2,500 mm, Rotating telehandler Chassis number: HR15149 Fork width: 150 mm Fork thickness: 60 mm ISO class: ISO class 4 = 5,000 - 10,000 kg Mast type: Telescopic Kwsdpewruqzsfx Ad Njt Transmission: Hydrostatic Condition: New device Technical condition: New Front tires type: Solid rubber Front tires size: MITAS EM60 17.5 R25 22PR Front tires condition: New Rear tires type: Solid rubber Rear tires size: MITAS EM60 17.5 R25 22PR Rear tires condition: New Description: 12 month factory warranty / Max. 2000 operating hours Side shift, Rear work lights, Front work lights, Heating, Road-legal (STVZO), Full cabin, Air conditioning, Interior mirror, Exterior mirror, Joystick, LED, Seat, Chocks, Machine movable by radio control, Preparation for work basket with winch TÜV preparation 20 km/h Mechanically adjustable fabric seat with headrest (GRAMMER) EcoStop 2 cameras (telescopic head right side) with display in the cabin

Condition: used, mileage: 1 km, first registration: 10/2025, fuel type: diesel, tire size: 445/95 R 25, axle configuration: 10x8, fuel: diesel, suspension: hydraulics, Year of construction: 2025, Equipment: crane, = Additional options and accessories = - 10x8 - Hydraulic suspension = Further information = Axle configuration Tyre size: 445/95 R 25 Suspension: hydraulic suspension Front axle: Max. axle load: 12,500 kg; Steering; Tyre tread left: 100%; Tyre tread right: 100% First middle axle: Max. axle load: 12,500 kg; Steering; Tyre tread left: 100%; Tyre tread right: 100%; Brakes: disc brakes Second middle axle: Max. axle load: 12,500 kg; Steering; Tyre tread left: 100%; Tyre tread right: 100%; Brakes: disc brakes First rear axle: Max. axle load: 12,500 kg; Steering; Tyre tread left: 100%; Tyre tread right: 100%; Brakes: disc brakes Second rear axle: Max. axle load: 12,500 kg; Steering; Tyre tread left: 100%; Tyre tread right: 100%; Brakes: disc brakes Kwjdpfx Adexpf Trs Net Weights Unladen weight: 60,000 kg Functional Lifting capacity: 230 kg Crane: Year of manufacture 2025 Condition Damage: none

Condition: new, With the Brugger Power Split S22, we present a powerful vertical log splitter with an impressive splitting force of 22 tons. This robust machine is ideal for a wide range of applications and offers maximum drive flexibility - whether via the electric motor or the PTO shaft. The splitting process takes place at two speeds, which enables the wood to be processed quickly and efficiently. Special features: - 22T splitting pressure - Combined drive: 5kW electric motor & PTO drive Kwjdpfotrlv Sjx Ad Not - Weight: 335kg - up to 110cm log length - Log lifter - Two speeds A log lifter is included in the scope of delivery to facilitate the handling of heavy logs. A hydraulic cable winch is available as an option, which offers additional application options and makes work even easier. With a maximum splitting length of 110 cm, the Brugger Power Split S22 offers the flexibility to process even larger pieces of wood with ease. A support table for shorter pieces of wood is also available. The Brugger Power Split S22 is the ideal choice for anyone looking for a reliable and powerful solution for splitting wood - whether for professional or private use. Prices: Power Split S22 = 2.670€ Power Split S30 (30 tons) = 2.960€ Support table for short logs = 125€ 4 compartment splitting wedge = 99€ Hydraulic cable winch = 595€ Contact us for your customized offer!