Used Angular Gear for sale (8,139)

Condition: used, Synchronous servomotor with holding brake and gearbox, Gear motor, electric motor, right-angle gear motor Motor: Manufacturer: LUST LTI DRIVES Type: LSK-190-7-30-560 T1,P,KK,1R Order No.: 716090 Art. No.: 0970.8016 Machine type: Permanent magnet synchronous servomotor Intermediate circuit voltage of the controller Uzk: 560 VDC Rated power: 14.51 kW Rated speed: 3000 rpm Rated torque Mn: 46.2 Nm Stall torque M0: 83.4 Nm Rated current In: 31.5 A Stall current I0 / I0max: 54.9 / 219.6 A Pole pairs: 3 Shaft diameter: 32 mm Shaft length: 50 mm - Shaft with key and keyway DIN 6885 / A10x8x50 - Option 1R Resolver, single pole pair - Option KK Terminal box - Option T1 (DIN-PTC double basic insulation) - Power connection, 8-pole terminal box - Resolver connection, 12-pole terminal box Holding brake: Chjdof Dlzujpfx Albeb Manufacturer: LUST LTI DRIVES Type: NFH10-H/BA Order No.: 718690 Art. No.: Rated voltage: 24 VDC Rated current: 4.5 A Rated power: 108 W Braking torque: 65 Nm Right-angle gearbox WESTFALIA Systemtechnik Hollow shaft output: inner Ø 65 mm Hollow shaft length: approx. 280 mm Gearbox output speed: max 450 rpm Gearbox input speed: max 4500 rpm Gear ratio: 10:1 - Shaft also ground on the outside - Gearbox can be mounted on two flange surfaces - Mounting holes on the gearbox 180 x 180 mm / 180 x 230 mm Overall dimensions L x W x H: 1110 x 250 x 350 mm Total weight: 180 kg Good condition

Condition: used, Angular gear for heating basins for edge banders, edge banding machines, melting unit with granulate container Chodpfx Aljb Uhrujbjb -Manufacturer: Homag -Nummer: 3 pieces available -different designs -Price: per piece -Dimensions: 300/170/H190 mm -Weight: 16.8 kg

Condition: good (used), Gear, angular gear, Stinrad gear, transmission gear, worm gear, angular gear for edge banding -Manufacturer: ZAE, angular gear with cardan joint from the BRANDT KS 25 edge banding machine -Type: W 88 -Translation: i = 2: 1 -Dimensions: 260/100 / H210 mm Chedpfxjgylraj Albeb -Weight: 7.2 kg

Condition: used, Gears, angular gears, stin gear, angular gear, transmission gear -Translation: i = 1: 1 -Drive shafts: dimensions see pictures -Dimension: Ø 225 x 180 mm Chedpsft Aicsfx Albob -Weight: 9.6 kg

Condition: used, heavy gear, angular gear -Translation: 1:16 -Drive shaft hollow shaft: 38 mm -Output shaft shaft: 48 mm -with claw coupling: Chsdpfx Alsdkf Iqsbob -Number: 1 piece gear available -Price: per piece -Dimensions: 470/240/H445 mm -Weight: 59 kg/piece

Condition: used, Synchronous servo motor with holding brake and gearbox, gear motor, electric motor, bevel gearbox motor Motor: Manufacturer: LUST LTI DRIVES Type: LSK-190-4-30-560 T1,P,KK,1R Order No.: 716090 Art. No.: 0970.8015 Machine type: Permanent magnet synchronous servo motor Intermediate circuit voltage of the controller Uzk: 560 VDC Rated power: 12.13 kW Rated speed: 3000 rpm Rated torque Mn: 38.6 Nm Stall torque M0: 61.5 Nm Rated current In: 26.6 A Stall current I0 / I0max: 41 / 164 A Pole pairs: 3 Shaft diameter: 32 mm Shaft length: 50 mm Chsdpfx Asf Dlzqjlbjb - Shaft end with key and keyway DIN 6885 / A10x8x50 - Option 1R Resolver, 1 pole pair - Option KK Terminal box - Option T1 (DIN-PTC double basic insulation) - Power connection, 8-pole connection box - Resolver connection, 12-pole connection box Holding brake: Manufacturer: LUST LTI DRIVES Type: NFH10-H/BA Order No.: 717173 Art. No.: 228-00043 Rated voltage: 24 VDC Rated current: 4.5 A Rated power: 108 W Braking torque: 160 Nm Bevel gearbox WESTFALIA Systemtechnik Shaft end output: Ø 60 mm with key Shaft end length: approx. 120 mm Gearbox output speed: max 450 rpm Gearbox input speed: max 4500 rpm Gear ratio: 10:1 - Gearbox can be mounted on two flange surfaces - Mounting hole on the gearbox 180 x 180 mm / 180 x 230 mm - Gearbox with triple chain sprocket, outer diameter: 147 mm, number of teeth: 17 Overall dimensions L x W x H: 1020 x 250 x 350 mm Total weight: 175 kg good condition 2 units available, price per unit.

Condition: used, Angular gear for heating basins for edge banders, edge banding machines, melting unit with granulate container -Manufacturer: Homag -Dimensions: 440/185/H240 mm Chedsb Uht Ujpfx Albsb -Weight: 30 kg

Condition: used, heavy gear, angular gear -Type: E 880 G -Shaft: Ø 20 mm Chjdpfx Aled N N Dqebob -Length: 50 mm -Flange: Ø 125 mm -Dimensions: 260/280/H160 mm -Weight: 16 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, operating hours: 41,417 h, Mazak Hyper Gear 510 4.0 kW Year of production February 2007 Meter reading 41417 hours MAZATROL operating system very good condition Technical data of the MAZAK HYPER GEAR 510 laser cutter - laser power: 4 kW Csdpswqr Twofx Albshb - feeds in the X/Y/Z axes: 3070/1545/100 mm - dimensions of the work table (length x width): 3000 x 1500 mm - maximum weight of the workpiece: 930 kg - maximum dimensions of the workpiece (length x width x height): 3050 x 1525 x 25 mm - laser type: CO2

Condition: excellent (used), functionality: fully functional, Year of construction: 2002, operating hours: 48,651 h, Mazak Space Gear-510 MKII 2.5 kW Year of manufacture December 2002 - after renovation!!! Very good condition! Meter reading 48651 hours Codjwqr Tdspfx Albjhb Operating system Fanuc L-64

Condition: good (used), Gearboxes, angular gearboxes, stin gearboxes, angular gearboxes, transmission gears -Translation: 2: 1 -Drive shaft: Ø 25 x 45 mm -Price: per piece Codpfx Asfbtgmelbjhb -Number: 4 pieces -Dimensions: 240/120/H235 mm -Weight: 13.15 kg

Condition: used, Geared electric motor, 8.5/1.4kW, angular drive, clutch, brake elevator motor Drive electric motor, 8, 5/1, 4kW, rev. 9-54 angle drive Lift motor Ziehl-Abegg Rfzu180.31-2/12 380V / 50Hz 8, 5/1, 4kW Drive torque: 1114 Nm Rev.: 9-54 rpm Angular drive, clutch, brake gear several pieces for sale from stock. Chsdpjud H Daofx Albjb

Year of construction: 2008, operating hours: 24,663 h, condition: ready for operation (used), functionality: fully functional, working width: 2,200 mm, machine/vehicle number: 0-241-06-7504, TECHNICAL DETAILS Saw blade overhang: 125 mm Main saw motor: 18 kW Feed rate: 1–150 m/min Max. clamping width: 2,200 mm FEEDING SYSTEM Lift table dimensions: approx. 4,300 × 2,200 mm Lift table load capacity: 7 t MACHINE DETAILS Chsdpfx Aezxgf Uslbob Operating hours: approx. 24,663 h (as of 05.10.2023) EQUIPMENT Automatic panel feeding system Lift table feeding system Longitudinal/cross-cutting unit Roller conveyor and transport system

Condition: used, Year of construction: 1988, operating hours: 2,506 h, functionality: fully functional, machine/vehicle number: 032-230, We are offering this Unicontrol 10 window manufacturing machine from Michael Wenig AG. Chjdpfxjzx Emde Albeb It is in used condition but fully functional. Year of manufacture: 1988, Machine No. 032-230 Including control cabinet! Comes with three complete sets of Leitz tools: - IV68 reversible cutting tool with standard profile - IV68 cornice profile for historic buildings - Tools for wood and aluminum windows The following tools are available (as shown in the pictures): 1x straight cutter, vertical and 1x horizontal 1x straight frame cutter, horizontal 1x tenon cutter, vertical, bottom and 1x top 1x cornice profile cutter, horizontal 1x tenon cutter, vertical 7 straight cutters 1x milling head frame, left/right/ top 1x milling head frame, bottom 1x milling head cutter, left/right/ top 1x milling head cutter, 2-wing, vertical 1x milling head cutter, bottom 1x milling head cutter, aluminum, for clipping 1x frame milling head, aluminum, for clipping 1x glass bead cutter, profile, standard 1x glass bead cutter, profile, cornice 1x roller shutter bead cutter It was decommissioned due to lack of space. Further information available upon request. Stored in a weatherproof location in 96231 Bad Staffelstein - Uetzing. Collection at your own expense, including loading. We are happy to help, but due to the weight and the necessary loading equipment, we cannot take over the loading and transport and cannot provide any warranty. Price upon request. Private sale. Old, used machine. No warranty, return, or guarantee claims.

Condition: used, Gearboxes, angular gearboxes, stin gearboxes, angular gearboxes, transmission gears Cedpfjb Uhrwex Albohb -Translation: 1:2 -Drive shaft: Ø 20 mm -Dimensions: 190/190/H110 mm -Weight: 11.7 kg

Condition: ready for operation (used), Year of construction: 1978, functionality: fully functional, overall weight: 9,000 kg, TECHNICAL DETAILS Foot cone angle: 15–55° Pitch circle diameter: 152 mm Tooth height with 21° finishing milling cutter: max. 10.7 mm Tooth height: max. 14.8 mm Tooth width at the tooth root: max. 28 mm Milling cutter diameter: 200 mm Milling cutter diameter according to template: max. 0.21″ (?) Number of teeth range: 8–50 Indexing range: 8–50 mm (?) Machining speed: 49.7 m/min Milling cutter speed: 32.6–49.7 m/min Feed rate: 2–3.1 s/tooth Workpiece spindle Diameter of conical bore at the large end: 99 mm Clamping length: 304.8 mm Taper per foot: 15.4 mm Taper depth: 15.8 mm Countersink behind the taper: 57.2 × 77.9 mm Spindle bore diameter: 22.3 mm MACHINE DETAILS Power of main drive motor: 7.46 kW Speed of main drive motor at 60 Hz: 1,800 rpm Speed of main drive motor at 50 Hz: 1,500 rpm Cjdpfx Aozwmy Nslbehb Speed of hydraulic motor at 60 Hz: 1,800 rpm Speed of hydraulic motor at 50 Hz: 1,500 rpm Speed of coolant pump at 60 Hz: 3,600 rpm Speed of coolant pump at 50 Hz: 3,000 rpm Speed of chip conveyor motor at 60 Hz: 1,800 rpm Speed of chip conveyor motor at 50 Hz: 1,500 rpm Dimensions & Weight Footprint: 3,200 × 2,210 mm Machine weight: approx. 9,000 kg

Condition: good (used), Year of construction: 2012, Lightly used mixing, dispensing, and adhesive application system with a gear pump in good condition: t-s-i mastermix gear basic – Mixing and dispensing system for 2-component silicone adhesives – Two-component gear pump dispensing system – Hose set, 2.5 m, 2-component dispensing gun – Siemens S7-200 control system – Overpressure/underpressure cut-off – Pot life monitoring with acoustic warning – 200-liter component A container – 20-liter component B container – Swivel arm extension 800 mm – Swivel arm height increase 300 mm Codpszq S Ifofx Albohb – Hose set extension 1000 mm – Automatic dispensing when in the "parking" position – Year of manufacture 2012, rebuilt by T-S-I in 2016/17 – System was lightly used – Sale from location Karlsruhe / Southern Germany – Inspection possible by arrangement

Condition: used, Gearboxes, angular gearboxes, stin gearboxes, angular gearboxes, transmission gears -Translation: 1:2 -Drive shaft: Ø 22 mm -Number: 1x gears available -Price: per piece Chodpfxjb Uht Ts Albeb -Dimensions: 180/110/H110 mm -Weight: 13.3 kg

Condition: ready for operation (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 570602, travel distance X-axis: 300 mm, travel distance Y-axis: 400 mm, controller model: Siemens Sinumerik 840 C, swivel angle A-axis (min.): -170 °, swivel angle A-axis (max.): 170 °, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Travel range, X-axis: 300 mm Travel range, Y-axis: 400 mm A-axis: -170° to +170° Chedpfszwmx Eox Albeb X-axis speed: 0.1–5,000 mm/s Y-axis speed: 0.1–5,000 mm/s Workpiece diameter with 1:10 reduction ratio: 300 mm Workpiece diameter with 1:1 reduction ratio: 212 mm Maximum number of teeth: 200 Minimum number of teeth: 6 MACHINE DETAILS Control system: Siemens Sinumerik 840 C Total power requirement: 38 kW Dimensions & Weight Space requirement: approx. 4,200 × 2,200 × 2,100 mm Machine weight: approx. 10,000 kg

Condition: used, Year of construction: 1959, total height: 1,900 mm, total width: 2,200 mm, total length: 1,500 mm, Colour: Blue Empty weight: 2.500 kg - Year: 1959 Codpfx Aljzkui Ssbjhb - Documentation available: Yes - CE certificate present: No - Serial number: 80 - Drive system: Conventional - Power [kW]: 5.0 - Transport dimensions: 1500mm x 2200mm x 1900mm (l x w x h) - Transport weight [kg]: 2500kg - Transport packages [pcs.]: 3 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: ready for operation (used), Year of construction: 1991, functionality: fully functional, travel distance X-axis: 140 mm, travel distance Y-axis: 100 mm, travel distance Z-axis: 300 mm, workpiece length (max.): 400 mm, The design of the base machine is characterized by the following features: - Horizontal arrangement of the workpiece spindle; vertical arrangement of the milling spindle or milling head - The workpiece is mounted between the workpiece spindle stock (left) and the tailstock (right) - The radial slide is mounted on the base (X-axis) - The axial slide moves on the radial slide (Z-axis) - The swivel milling head is equipped with an automatic angle adjustment (A-axis); the swivel slide (Y-axis) moves tangentially to the workpiece diameter TECHNICAL DETAILS Travel range X-axis: 140 mm Travel range Y-axis: 100 mm Travel range Z-axis: 300 mm Tailstock travel W-axis: 420 mm Swivel angle of the end mill head A-axis (left): 50° Swivel angle of the end mill head A-axis (right): 60° Largest millable module with hob cutters according to DIN 8002: 4.5 mm Largest millable module for high-performance milling: 3.0 mm Number of teeth: 2–999 Workpiece diameter with manual loading: max. 200 mm Workpiece diameter with automatic loading: max. 150 mm Workpiece length: max. 400 mm Milling spindle speed range B-axis: 0–1,500 rpm Workpiece speed C-axis: 0–350 rpm Milling tool data Milling tool diameter: 40–102 mm Milling tool length: max. 230 mm Radial front diameter (standard): 16–32 mm Milling coordinates Z-axis: 100–400 mm X-axis: 130–150 mm Y-axis (end face of the milling spindle): 50–230 mm W-axis (end face of the tailstock spindle): 165–585 mm Feed rate X-axis: 3,500 mm/min Feed rate Z-axis: 3,500 mm/min Chodjzwmyijpfx Albeb Feed rate Y-axis: 4,000 mm/min Feed rate W-axis: 5,500 mm/min Feed rate V-axis (portal loader): 80,000 mm/min EQUIPMENT IBH control system Loading device Extensive range of accessories

Condition: ready for operation (used), Klingenberg PNC 30 Gear Measuring Machine Module range: 0.5 - 15 Max. gear outer diameter: 300 mm Gear width, continuously measurable: 400 mm Smallest/largest helix or pressure angle: 0 - 90° Center distance: 0 - 700 mm Diagram recording magnification: 50, 100, 200, 1000, 2000x Codpfxozyghfs Albshb Diagram longitudinal magnification: 0.5, 1, 2, 4, 5, 10, 20x Permissible test gear weight: 200 kg Total connected power of the testing device: approx. 4 kVA Power supply: all mains voltages at 50 + 60 Hz Dimensions of the device with center adapters (L x W x H): 1350 x 955 x 2000 mm Dimensions of the work table for evaluation units (L x W): 1600 x 800 mm Net weight with control cabinet: approx. 1200 kg You are welcome to visit us for a demonstration. We will gladly arrange cost-effective shipping for you! The purchase price includes VAT. You will receive a proper invoice. For foreign customers, a net invoice can also be issued. A valid VAT identification number is required. Subject to prior sale. Visit our shop and view our other offers. The company names and trademarks mentioned are the property of their respective owners and are used solely for identification and description of the products. Deviations from technical data and errors in the description of the item may occur and are reserved.

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, machine/vehicle number: 035-804, input voltage: 400 V, type of input current: three-phase, Equipment: CE marking, Year of construction: 1996, the latest tools were acquired in 2024. Production of wood and wood-aluminum windows. Oppold 67 mm wood and wood-aluminum. Zuani 79 mm wood and wood-aluminum. Zuani 91 mm wood and wood-aluminum. Also, production of entrance doors and lift-and-slide doors. Csdpfozlytxsx Albohb The production line is still fully assembled and functional. Also available for individual sale: UC 6 with Oppold IV 67 tool for 3,500 EUR. Zuani tools IV79 and IV 91 for 8,900 EUR. If you have any questions or require further information, please send us a message or call us.

Condition: good (used), Year of construction: 1987, functionality: fully functional, overall weight: 1,900 kg, total length: 1,690 mm, total width: 1,260 mm, total height: 815 mm, gear ratio: 200, torque: 65,000 Nm, shaft diameter: 200 mm, 2 units of 4-stage industrial gearboxes used in winch applications. Manufacturer: Asug Penig, GDR Type: TGL 34611/10A8-450x200 Year of manufacture: 1987 Maximum torque: 65000 Nm Gear ratio: 200:1 Actual gear ratio: 200.364 Power: n1 950 rpm = 33 kW n1 710 rpm = 24.6 kW Chjdpfx Alezw H Hisbob Dimensions: Shaft d1: Ø 45 mm x 110 mm Shaft d2: Ø 200 mm x 350 mm Shaft height h1: 400 mm Length: 1690 mm Width without shafts: 560 mm Width with 2x shafts: 1260 mm Height: 815 mm Weight without oil: 1900 kg (For design A8, the weight increases to approximately 2000 kg) Oil capacity: 68 kg The TGL 34611 series of gearboxes for conveyor systems and hoisting equipment includes three- and four-stage gearboxes with hardened gears. The shafts are mounted in roller bearings. Splash lubrication is used. Spur gears and shafts are positively connected by means of keyways. The external dimensions of the housing for a given size are the same for both the three- and four-stage versions. In the four-stage version, the drive shaft is located below the plane of the components. The housing is made of cast iron. The gearboxes can be operated in both directions of rotation.

Condition: excellent (used), Year of construction: 1972, functionality: fully functional, For sale: this gear hobbing machine. It is connected and can be tested. Comes with numerous accessories. Technical specifications: Max. gear diameter: 7100 mm Gear width: 1500 mm Max. module: 45 Table diameter: 4000 mm Hob diameter x width: 400 x 500 mm Max. helix angle: 45 degrees Cutter diameter: 500 mm Cutter speed: 9–63 rpm Total power consumption: 47 hp Machine weight: 160,000 kg Chodpfx Alexwlthobob The machine has hydraulic workpiece balancing. A video of the machine can be sent via WhatsApp.