Used Rotating Laser for sale (10,572)

Condition: excellent (used), SINGLE-SIDE EDGE BANDER (LEFT-side) Edges (band in rolls) thickness (Min/Max) mm 0,3 / 3 - in stips / lippings mm max 1 Panels thickness (min/max) mm 14 / 60 (LASER - Max 50) Numerical Control ICOS Open Feeding speed (adjustable) m/min 6 - 30 Top pressure system with rubber belt Spraying unit (Anti-sticking liquid) In-feed fence, adjustable by N.C. Panels in-feed (servo) system A1 / 15 Pre-milling Unit (vertical joint trimmers) 08.378 (2 x Kw 4,5) adjustable by N.C. Glueing Unit (P.U.R. Glue + Quick Melt unit) 283.201 + 283.203 Glueing Unit (Thermofusion with Laser) Laser System LASERLINE Spraying Unit (for anti-release liquid) Band Pressure zone + Edge coils supporting unit (No. 36 + 12 reels) Snipping (end-cutting) 08.42 (Kw 0,2 x 2) work speed up to 30 m/min (0°-25°) Rough Trimming unit 08.0555 HS/LS1 (Kw 1 x 2) Fine Trimming unit (Multi-profile, by N.C. adjustment, for 4 profiles) 08.0587 (Kw 0,66 x 1) Multi-Profile Copying unit by N.C (fine + contour trimming) KFA 30 (Kw 0,5 x 1) max 30 m/min Profile Scraping unit (Multi-profile, by N.C. adjustment, for 4 profiles) 08.0516 Glue scraping unit 08.521 Spraying Unit (for polishing liquid) Buffing unit 08.614 (Kw 0.25 x 4) No. 2 Milling grooving units 08.190 (Kw 4,5 x 2) swivelling 90°/180°/270° (adjustable by CN) Djdpoi Hn Srsfx Al Aeku

Year of construction: 1998, condition: like new (used), 65 Watt YAG laser Dksdpfjd Dhw Nox Al Asu

Condition: new, Year of construction: 2025, BODOR laser cutting machines – top quality at top prices. -Easy programming – with service and training, installation, and commissioning. -Machines with power outputs from 3 kW to 30 kW. Easy to operate and suitable for both beginners and established companies. Dkedpfefbg Hbex Al Aeu

Condition: excellent (used), Various ZEISS Eagle Eye navigators, as shown in the offer. Dsdpfx Alody Apve Asku Manufacturer's product description: Fast quality assurance in body construction In addition to countless bores, edges, cuts, or transitions also need to be measured in automotive construction. Especially in series testing, the inspection of bores is an extremely time-consuming task. With the EagleEye Navigator, almost half the time is saved when inspecting a complete car body. Typical labor-intensive steps of the conventional measurement method are completely eliminated: no installation or removal of hemispherical adapters, no material, storage, and handling costs. Reduced cycle time and high quality And that's not all: The use of the ZEISS EagleEye navigator directly reduces the cycle time of the measurement and simultaneously increases the quality of the stamped parts. The result is a qualitatively accurate and evaluable result with information on the diameter, position, and shape of the measuring element – accurate to the micrometer. With the ZEISS EagleEye navigator, the measuring machine becomes a production tool. Data and price: on request! We will be happy to prepare a detailed offer for you! Note: Our offer is exclusively aimed at professional customers! (Changes and errors in the technical data, information, and prices, as well as prior sale, are reserved!)

Condition: new, Year of construction: 2023, laser power: 6,000 W, We have been trading YAWEI fiber laser machines for over 7 years. We take care of the entire service. All you need is gas and electricity, we take care of the rest. We have already installed 300+ fiber lasers from YAWEI across Europe. Here we offer a new stock machine YAWEI fiber laser machine type HLF1530. Power: 6kW FE up to 25mm / VA up to 15mm / CU up to 8mm Sheet format: 3000 x 1500mm Siemens DsL touchscreen control with LAN/USB Siemens drives Dkjdpoqgcyrsfx Al Aju THK tours automatic changing table with light barriers Precitec Auto Focus Procutter cutting head MAX Photonics resonator with 6kW and German on-site guarantee Small parts conveyor belt Ball transfer table for scratch-free and easy sheet metal handling 24 month guarantee CAD/CAM software Installation Delivery (within Germany) training CE certification The machine is a stock machine. An identically constructed one can be tested under power at any time Give us a call !

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2017, laser power: 6,000 W, CNC laser cutting machine TruLaser 3040 Fiber (L50) 6000 Watt X working area max.: 4000 mm Y working area max.: 2000 mm Z working area max.: 115 mm Control system: Siemens Sinumerik 840D SL Laser power: 6000 Watt Sheet metal thickness steel max.: 25 mm Sheet metal thickness stainless steel max.: 25 mm Sheet metal thickness aluminum max.: 20 mm Sheet metal thickness copper max.: 8 mm Standard equipment Standard features Machine - Closed machine frame - Integrated cabinet with roller shutter - Torque drive in combination with linear direct drives - Closed beam guidance via laser light cable (LLC) - Cooling unit - Integrated control cabinets with internal lighting - Automatic sheet metal changer in longitudinal direction - 19" touch color screen - Longitudinal conveyor belt - Work area lighting - Positioning laser diode - Spraying device - PierceLine - FocusLine - NitroLine - PlasmaLine - Automatic nozzle cleaning - Transport and assembly device TRUMPF Laser - Solid-state laser TruDisk 3001 with one LLC output - Excitation via pump diodes - Laser power control Cutting head - Universal cutting head - Single cutting head strategy - Protective glass against lens contamination - Condition monitoring of the protective glass - ControlLine: Height control and sheet metal edge detection Control system - SINUMERIK 840D SL control system - Simple workshop programming - TruTops Laser via network access - Fast reproduction - Integrated technology data - Automatic shutdown - Programmable cutting gas/pressure selection - ContourLine - FastLine - FlyLine - AdjustLine Dedpfxszlpb Se Al Ajku - Teleservice via Internet Data transfer - USB interface - RJ-45 network connection - Wireless Operation Point (basis for Visual Online Support) Safety - CE marking - Light curtains - Multi-chamber extraction system - Compact dust collection system - Machine enclosure, certified viewing window, door on the right - Sliding roof - Nozzle changer - CoolLine

Condition: as good as new (ex-display), functionality: fully functional, Year of construction: 2020, operating hours: 200 h, machine/vehicle number: 31015, control type: PLC-controlled, degree of automation: manual, actuation type: manual, controller manufacturer: 4JET, overall weight: 350 kg, total length: 1,310 mm, total width: 525 mm, total height: 1,454 mm, power: 200 kW (271.92 HP), laser hours: 200 h, compressed air connection: 5 bar, laser power: 200 W, laser wavelength: 1,064 nm, type of cooling: water, laser type: fiber laser, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, We offer a non-contact, mobile laser cleaning system, model 4JET M200, which was used solely for demonstration and testing purposes. We also offer a wide range of accessories, including: fiber extension cables (3m to 10m), 5 pieces; laser safety goggles; and a mobile laser protection curtain with frame. Dksdpfx Aljzlrzze Asu

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2010, operating hours: 21,713 h, machine/vehicle number: 007, laser power: 4,000 W, sheet thickness steel (max.): 12 mm, sheet thickness stainless steel (max.): 10 mm, sheet thickness aluminum (max.): 8 mm, travel distance X-axis: 2,520 mm, travel distance Y-axis: 1,550 mm, travel distance Z-axis: 300 mm, No minimum price – guaranteed sale to the highest bidder! The machine has been serviced annually (most recently in December 2025); service records are available. Dkedpfx Ajzrnhwjl Aou The Laser Turbo-Blower was replaced in 2021. The X-axis and Y-axis were renewed in 2023 after 27,066 operating hours. TECHNICAL DETAILS Travel range X-axis: 2,520 mm Travel range Y-axis: 1,550 mm Travel range Z-axis: 300 mm Travel range B-axis: 17 mm Cutting capacity, normal steel: max. 12 mm Cutting capacity, stainless steel: max. 10 mm Cutting capacity, aluminum: max. 8 mm Laser power: 4 kW Wavelength: 10.6 µm Laser beam diameter at the outlet of the laser resonator: 27 mm Cutting speed X-axis: 0 to 20 m/min Cutting speed Y-axis: 0 to 20 m/min Travel speed X-axis: max. 80 m/min Travel speed Y-axis: max. 80 m/min Travel speed Z-axis: max. 60 m/min Workpiece weight: max. 330 kg Material size: max. 1,500 × 5,000 mm Table height: 820 mm MACHINE DETAILS Control system: AMNC-F (FS-160I LPB) Minimum measuring unit: 0.001 mm Memory capacity: 10 MB Dimensions & Weight Machine dimensions (L × W × H): 5,745 × 2,630 × 2,151 mm Net weight: 7,700 kg Operating hours (according to counter) Operating hours: 34,401 h Runtime: 21,713 h Cutting time: 11,111 h EQUIPMENT Loading and unloading system Filtration system Manuals The seller can offer dismantling and loading of the machine for an additional fee. Within Germany, the seller can also offer an installation service at the new location.

Condition: ready for operation (used), Micro-Epsilon optoNCDT laser distance sensor ILD2300, used, in good condition, 100% functional, scope of delivery as shown in the photos. Dksdpfx Aljzp Az To Aou

Condition: new, functionality: fully functional, Year of construction: 2026, Equipment: CE marking, Here, you see a pallet rack system designed for space-saving storage of sheet metal in sizes ranging from 1x2 meters to 6x2 meters. Dsdpszrgq Rjfx Al Ajku This is a heavy-duty steel welded construction. Storage weight: 3000 kg All shelves are 100% load-bearing. Easy loading and unloading of sheet metal. Automation connections to laser and punching machines are possible. Advantages at a glance: - Stores 2.5 times more sheet metal than cantilever racks in the same footprint - Neat and organized appearance - No more damaged sheet metal - Large insertion width between the pallet and the frame - Pallets are open on the side, allowing even thin sheet metal to be removed without a crane - Depalletizer can be moved freely (see video) - Standard hot-dip galvanized - CE marking and static calculation - The fire load in the building is reduced as no more pallet wood is required. Request a non-binding offer. The rack system will be manufactured to your required height and length.

Condition: new, Year of construction: 2026, load capacity: 6,000 kg, lifting height: 29,900 mm, total length: 9,140 mm, Rotating forklift Manitou MRT 3060 Drive Diesel Year built 2026 Dedpfxezi Hb Rs Al Aoku Lifting height (mm) 29,900 Lifting weight (kg) 6,000

Condition: new, Year of construction: 2026, load capacity: 6,000 kg, lifting height: 31,000 mm, total length: 9,150 mm, Maximale Tragkraft 6.000 kg Maximale Hubhöhe 30,80 m Maximale Reichweite 26,90 m Drehbereich 360° (endlos) Stützen Typ Scherenstützen mit einzelnem Teleskopausschub (Patent von Magni) Motor Modell Volvo TAD 582 VE Stufe V Volvo TAD 552 VE Stufe IIIA Nennleistung 160 kW (218 PS) bei 2.300 U/min 160 kW (218 PS) bei 2.200 U/min Max. Drehmoment 925 Nm bei 1.380 U/min 910 Nm bei 1.450 U/min Hubraum 5.130 cm3 Zylinderzahl 4 in Reihe Bauart Dieselmotor mit Direkteinspritzung und Turboaufladung Djdpfjy Abh Isx Al Aoku Kühlsystem Wassergekühlter Ladeluftkühler Fahrantrieb Typ Hydraulisch Max. Druck 480 bar Getriebe Dropbox 2 Fahrstufen für Vorwärts- und Rückwärtsfahrt Achsen und Bremsen Typ Achsen mit Planeten-Endantrieben Vorderachse Pendel-Lenkachse mit automatischem Niveauausgleich +/-8 Grad Hinterachse Pendel-Lenkachse mit hydraulischer Sperre Anzahl der Lenkräder Allradlenkung Lenkungsarten Vorderrad-/Allrad-/Hundeganglenkung Betriebsbremse Ölbad-Lamellenbremse an jeder Achse, hydraulisch betätigt Feststellbremse Negativbremse, hydraulisch betätigt Bereifung 445/65 R22.5 Leistungen Max. Fahrgeschwindigkeit 40 km/h Max. Zugkraft am Lasthaken 89 kN Maximale Anhängelast am Abschlepphaken 5.000 kg Steigfähigkeit 41 % Wenderadius (mit Gabelzinken) 6.730 mm Gewichte Leergewicht* 22.700 kg Auf Vorderachse, unbeladen (Ausleger eingefahren und abgesenkt)* 10.500 kg Auf Hinterachse, unbeladen (Ausleger eingefahren und abgesenkt)* 12.200 kg Füllmengen Dieselkraftstoff 270 l 270 l AdBlue 40 l / Hydrauliköl 160 l 160 l Motoröl 16 l 16 l Kühlmittel 40 l 40 l Arbeitshydraulik Anlagentyp Load-Sensing Betriebspumpe Verstellpumpe Max. Hydraulikfördermenge 170 l/min Max. Traglast Auslegerkopf 75 l/min Max. Betriebsdruck 350 bar Verteiler für Ausleger- und Oberwagenbewegungen Elektromagnetisches Proportionalventil, SIL 2 Bewegungssteuerung Zwei 2-Achsen-Joysticks von Danfoss mit Totmanneinrichtung

Condition: used, Year of construction: 2026, load capacity: 6,000 kg, lifting height: 25,800 mm, total length: 9,050 mm, Rotating forklift Magni RTH 6.26 Drive Diesel Dkodpoztf S Asfx Al Asu Year built 2026 Lifting height (mm) 25,800 Lifting weight (kg) 6,000

Condition: new, Year of construction: 2026, load capacity: 8,000 kg, lifting height: 51,000 mm, total length: 11,520 mm, Rotating forklift Magni RTH 8.51 Drive Diesel Dedpfx Aoztgd Hjl Asku Year built 2026 Lifting height (mm) 51,000 Lifting weight (kg) 8,000

Condition: new, functionality: fully functional, Year of construction: 2026, laser power: 20,000 W, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, fiber laser cutting machine - NOW AVAILABLE power: 20000W table size: 6000x2500mm pallet changer Siemens controller with touch screen Siemens drives Precitec Procutter auto focus torch Max resonator chip conveyor offered with: Dksdpfx Alevzqpte Aou warranty CAD CAM software setup delivery optional training this is a new stock machine and could be tested under power any time. please contact us

Condition: good (used), Fork carriage, rotator for wheel loaders, forklifts, telescopic handlers, forklifts, rotator, forklift rotator -Manufacturer: Stabau, forklift rotator 360° continuous rotation -Type: unfortunately without a type designation Dedszkg U Hspfx Al Aeku -Load capacity: approx. 2,500 kg -Mounting dimensions: see photos -Dimensions: 1050/205/H755 mm -Weight: 353 kg

Condition: good (used), functionality: fully functional, Year of construction: 2007, including Sheetmaster, Gripmaster, and Toolmaster Dodpfx Aljzr Ha Ej Asku Year of manufacture: 2007

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, laser power: 4,000 W, X working area max.: 3050 mm Y working area max.: 1550 mm Control: Rexroth IndraMotion MTX Laser power: 4,000 watts Standard equipment: Machine - Sturdy, easily accessible C-frame - Coordinate guidance for high-precision machining - Linear tool changer with 21 tool stations and 4 clamps - Maintenance-free three-phase drive motors - Repositioning device with programmable hold-down - Foot switch for closing clamps - 2 good parts containers - Automatic shutoff Laser station - TruFlow laser - High-frequency excitation - Cooling unit - TASC 3 laser controller - Enclosed beam guidance - Beam tube ventilation with compressed air - Programmable cutting gas pressure - Laser cutting head with 170 mm focal length - Universal quick-change cutting head device UTI with bus connection - LensLine - FocusLine - ControlLine - NitroLine Dkedpfx Aljy Saqgo Aeu - SprintLine - ContourLine - FlyLine - PlasmaLine - High-speed cutting - Additional Xp and Yp axes - Ejector cylinder for laser parts - Fast flap for laser parts 500 x 500 mm - Liftable laser cutting support - Slag cone detection - Laser logbook function Punching station - Electro-hydraulic punching head - Rotatable mono-tool holder - Tool length compensation - Programmable hold-down with adjustable force - Stroke counter for punches - Spray lubrication for punches - Punch slug extraction - Warp detection - Flap for punched parts 500 x 500 mm - Fill level monitoring in the punching console Control - Open control system based on Bosch Rexroth IntraMotion MTX - Operating panel with 15" TFT touchscreen - Program management and 80 GB storage capacity - Diagnostic function with laser logbook - Integrated technology data - Teleservice Data transfer - Network connection RJ45 and USB interface Safety - CE marking - Multi-beam light barriers - Monitoring system for, among others, gas pressure, temperature, cooling water - Hydraulic quick shut-off - Protection against stray radiation - Compact extraction unit - TruFlow 4000 - Vibration-dampened installation - Thread forming function - MultiTool function - Chip conveyor with tilting container - Active die - Ejector for small parts - Brush tables with loading aid - Marking function - Repositioning cylinder - Warp detection

Condition: used, Clamping surface (left-right) 630 mm Clamping surface (front-back) 630 mm workpiece weight / t Dodpfx Ajy Sulfol Aeku

Condition: new, functionality: fully functional, machine/vehicle number: HR14346, Year of construction: 2026, load capacity: 4,500 kg, lifting height: 18,000 mm, fuel type: diesel, mast type: triplex, construction height: 3,040 mm, power: 85 kW (115.57 HP), fork length: 1,200 mm, empty load weight: 14,100 kg, total length: 7,260 mm, drive type: Diesel, construction width: 2,420 mm, Rotatable telehandler Chassis number: HR14346 Fork width: 120 mm Fork thickness: 50 mm ISO class: ISO class 3 = 2,500 - 4,999 kg Mast type: Triplex Gearbox: Hydrostatic Condition: New device Technical condition: New Front tires type: Solid rubber Front tires size: CAMSO A8 158 4LR1 4057020 14PR Front tires condition: New Rear tires type: Solid rubber Rear tires size: CAMSO A8 158 4LR1 4057020 14PR Rear tires condition: New Dkodpfoyn Tcmox Al Asu Description: 12 month factory warranty / Max. 2000 operating hours STVZO, full cabin, CE certificate, interior mirror, exterior mirror, joystick, seat, battery 2x12V wheel chocks TÜV preparation

Condition: new, functionality: fully functional, machine/vehicle number: 15340, Year of construction: 2027, load capacity: 4,500 kg, lifting height: 20,600 mm, fuel type: diesel, mast type: telescopic, construction height: 3,040 mm, power: 85 kW (115.57 HP), fork carriage width: 1,320 mm, fork length: 1,200 mm, empty load weight: 14,900 kg, total length: 6,730 mm, drive type: Diesel, construction width: 2,480 mm, Rotating telescopic forklift Chassis number: 15340 Dodozwrv Aopfx Al Aoku Fork width: 125 mm Fork thickness: 50 mm ISO class: ISO class 4 = 5,000 - 10,000 kg Mast type: Telescopic Speed class: 20 Condition: New machine Technical condition: New Front tire type: Air Front tire condition: New Rear tire type: Air Rear tire condition: New Description: Secure your new machine now – only a limited number of units available! Heater, fully enclosed cab, CE certificate, interior mirror, LED, seat, - Tires – ASCENSO MPB400 – 18–19.5 18PR 165B - Interior rearview mirror - LED work lights front and rear - Starter battery with high capacity – 2 × 12 V – 180 Ah – 1200 A - Wheel chock - Market Germany – 20 km/h (12.4 mph) - Easy Link - CE machine approval - Operating manual German - Maintenance manual German

Condition: used, machine/vehicle number: 1175, Year of construction: 2015, operating hours: 2,763 h, load capacity: 4,000 kg, lifting height: 18,000 mm, overall weight: 13,900 kg, enginetype: Diesel, manufacturer: Merlo Dkodpfx Alezuk Ufo Aeu

Condition: used, Rotating Boring Table Travel X: 2000 mm Table size: Length 1240 mm x Width 1250 mm Bench width: 1030 mm Diameter of the ball screw: Ø 70 mm Djdpfx Aljzwuu Is Asku 2 motors INDRAMAT: 1 travel X motor + 1 table rotation motor Supplied without electrical panel (electrical cabinet to be redone) Protector hennig in average condition Ideal part for retrofitting Total bench length: 5200 mm Width: 1900 mm Height: 900 mm Weight: approx 7 T

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, Bystar 4025 NT 80 for sale Djdpjzw Em Iofx Al Asku C02 laser 4.4kW Bylaer resonator Fully operational and can be seen in production Machine includes Dust extraction and chiller Also included is an additional Bylaser 4400 (4.4kW) Perimeter light guards The machine is unique in that it has two 8000mm change over tables that feed the 4025 machine, two extension work areas at each end of the machine as can be seen in the pictures allowing an 8000mm cutting area. Please feel free to contact if you require any additional information, currently in production but will be available for decommission in November due arrival of new machine.

Condition: new, Year of construction: 2026, Hydraulic grapple for sorting, rotating, for excavators weighing 25-35 tons Technical specifications Dkjdpfx Ajzvw Ubel Aeu - Weight 1980 kg - Maximum opening 2216 mm - Width 1486 mm - Height 2414 mm - Nominal pressure 200-240 MPa - Recommended flow 40-50 Lpm