Used Rotary Dryer for sale (5,459)

Condition: new, Year of construction: 2025, functionality: fully functional, input voltage: 400 V, Electrolux professional tumble dryers, 2 models, UNUSED. - 1x Electrolux TD6-17S, dimensions = 790x1120x1960 mm. 230V/Gas, 50 Hz, 2 kW PRICE = €7000 - 2x Electrolux TD6-16, dimensions = 720x1210x1700 mm, 400V, 60 Hz, 14.3 kW PRICE = €3750 Bjdpozg D Uisfx Adreli The Electrolux TD6-17S is an industrial stack dryer with two drums and a total capacity of 2 x 17 kg. This double tumble dryer is designed for maximum efficiency, fast drying times, and low energy consumption, making it ideal for professional laundries and self-service laundromats.

Condition: not inspected (used), 1 Cordless rotary hammer drill, manufacturer: Hilti, model: TE6-A30, with drill bits, in a case. Blodjzg D S Ispfx Adrji

Condition: excellent (used), Year of construction: 2012, operating hours: 350 h, functionality: fully functional, machine/vehicle number: R-3176, overall weight: 5,500 kg, total width: 1,400 mm, total length: 7,000 mm, temperature: 200 °C, power: 6 kW (8.16 HP), type of input current: three-phase, input voltage: 400 V, input frequency: 50 Hz, Equipment: documentation/manual, For sale is a Binder DRYON DRVF 1400×7 fluidized bed/vibrating dryer for wood chips, compost, biomass, wood shavings, and comparable bulk materials. Bledjzg Dx Uopfx Adrji The system was used exclusively for testing purposes and has only approximately 300–400 operating hours. It is in good condition and fully functional. Key data: (The system has previously been used for steam drying with superheated steam at approximately 200 °C. Conversion to other drying media, such as air or flue gas, is possible in principle with appropriate modifications.) - Dryer width: approx. 1,400 mm - Overall length: approx. 7,000 mm - Input capacity: approx. 2,000 kg/h wet (designed for green waste) - Output capacity: approx. 1,200 kg/h dry (designed for green waste) - Water evaporation: approx. 667 kg/h (designed for green waste) - Output moisture content: ≤ 10% (designed for green waste) - Installed electrical power: approx. 6 kW - Weight: approx. 5,500 kg Upon request, additional components for a complete drying unit can be purchased. These include a filter system, a high-performance radial fan, and the associated drive motor. (see planning drawing) Filter system: NESTRO Lufttechnik GmbH, Type Jet 9525, year of manufacture 2013, factory number FA169096, filter area 282.6 m², max. compressed air 6.0 bar, category EK004182, weight approx. 8,000 kg. Fan / drive motor: High-performance radial fan Type HRV28-450 with drive motor VEM motors GmbH, Type IE2-W21R 315MX2, year of manufacture 02/2013, motor number 180022/0001 H, power 160 kW / 218 HP, voltage 400 V, current 274 A, speed 2,973 min⁻¹, frequency 50 Hz, protection class IP55, insulation class 155, weight approx. 955 kg.

Condition: excellent (used), Here we offer you a chamber dryer. External dimensions approx.: Width: 1,885 mm Depth: 1,200 mm Height: 2,425 mm Internal dimensions approx.: Width: 1,030 mm Depth: 1,000 mm Height: 2,100 mm Internal volume: 2.2 m³ Bljdpszdzixefx Adrsi Rated temperature: 100 °C Operating temperature: 85 °C Heating medium: 3 x 400 V, 50 Hz Heating power: 20 kW Air circulation rate: 4,500 m³/h / 400 Pa Motor power: 1.1 kW Protection class: IP 54 The chamber heating oven must not be used for flammable or explosive materials. The chamber heating oven must not be installed in an explosion-proof area. Continuous chain conveying system External dimensions: Height: 1,880 mm Width: 809 mm Depth: 950 mm Carrier bars: 13 pieces Pitch: 228 mm Carrier bar width: 354 mm Carrier bar depth: 320 mm Usable height: 135 mm Drive motor power: 0.25 kW at 189 Nm Transport speed: average 5 m/min. Load capacity/carrier bar: max. 10 kg Total load capacity: max. 130 kg Total weight when loaded: max. 730 kg Year of manufacture: 2005 Type: Ke/SO Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data and specifications are reserved!) We will gladly answer any further questions you may have over the phone.

Condition: used, TECHNICAL DETAILS - Drum diameter : 976 [mm] - Drum depth : 870 [mm] - Capacity : 34 [kg] - Electric motor : 0.75 [kW] - Reversing motor : 0.37 [kW] - Air flow : 20 [m³/min] - Air outlet : Φ 200 [mm] - Dryer width : 1022 [mm] - Dryer depth : 1180 [mm] Bjdpfxoug U Ryo Adrsli - Dryer height : 1932 [mm] - Net weight : 324 [kg] Power supply - Voltage : 440 [V] - Frequency : 50 [Hz] - Heating : 36 [kW]

Condition: excellent (used), Rotary indexing table Model C 315 k Diameter 315 mm Blodpfx Ajzdt N Dodroi Direct indexing: 15 degrees or indirect indexing via crank and indexing discs Height 135 mm Width 360 mm Depth 560 mm, with crank Weight 75 kg

Condition: new, Year of construction: 2026, functionality: fully functional, table width: 1,300 mm, table length: 2,500 mm, overall weight: 1,550 kg, Equipment: CE marking, documentation/manual, This CNC router is designed to deal with furnishing and 3D milling of any shape or form you want. It has a rotary device that allows you to make balusters, stair posts, and other structures. Wattsan CNC milling machine for medium or big production is simple to operate and will provide reliable results. Bledpfx Ajr D Nmkodrei Wattsan M1 1325 planetary gears allow you to cut hardwoods and soft metals easily. It’s perfect for the furniture industry. With a Wattsan milling machine, you may work with metal, hard wood, plastic, foam rubber, aluminum, and plexiglass. You can give our managers a call for additional details! Wattsan M1 1325 RD machine characteristics: Working area: 1300x2500 mm Spindle: 4.5 kW Machine size: 2700x 3380x1780mm Weight: 1350 kg Virmer provides not only prime machines but also service and delivery. Our engineers and managers are ready to answer all of your questions and provide video assistance if required. Also, owners of Wattsan equipment get lifetime online support. Virmer is located in the Netherlands and works all over Europe. Virmer is Wattsan's official supplier. We provide not only laser engravers, but also metal cutters, welders, markers and cleaning machines. Wattsan is a Chinese manufacturer, which has been creating laser equipment for almost 15 years and keeps evolving with the help of its clients. Thanks to feedback Wattsan made over 50 modernizations, which made machines more reliable, precise and powerful so you could upgrade your business up to the new level. YOU CAN WRITE OR CALL US! WE WILL SELECT THE RIGHT MACHINE FOR YOUR TASK On our company you can find a wide range of machines and components: Laser Metal Cutting Machine; Laser Metal Machine, Fiber Metal Laser, Fiber Metal Laser Engraver; CNC laser machine for metal; Laser machine for wood; CNC laser machine; Laser engraving machine; Laser engraver; Laser cutting machine for plywood; Laser engraver; Laser cutting machine for metal; CNC milling machine; laser marker. Lenses; Chillers; Cooling system for machine; Chiller S&A ; IPG laser, MAX photonics, Raycus; Compressor; Rotary device; Mirror for laser machine.

Condition: good (used), Here, we offer a Busch rotary vane vacuum pump. Busch rotary vane vacuum pump p 0.1 hPa (mbar) Oil: Busch VM 100, 1.00L Weight: approx. 450 kg Type: RA 0040 F 503 Bedpfx Adozdqqljrsli Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We are happy to answer any further questions you may have over the phone. Written orders can be placed via email or fax.

Year of construction: 2016, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 21320-33176, daxner WM 5-A-A 400 Rotating paddles generate centrifugal force, which presses the material through a stationary screen. Particles smaller than the screen mesh size pass through the screen, while particles larger than the mesh size are discharged via the coarse material outlet. Design: Bsdpfx Ajzgt D Tsdrjli → Stainless steel housing with robust front plates on both sides → Rotor shaft with paddle assembly and ball bearings → Double shaft sealing rings → Easy-to-clean design with removable front plate, including quick-release clamps, safety switch, and tilting mechanism → Connecting set for the inlet pipe with a quick-release fastener → Discharge hopper with a joint for the outlet pipe, including a 90-degree bend → Overflow tank made of shatterproof, transparent acrylic glass (capacity: 4 liters) → Drive with a 3-phase AC motor, 0.55 kW; 400 V; 50 Hz Output: → Up to 5,000 kg/h of wheat flour at a 2,000-micron mesh width Screen basket: → Nitex, standard 2,000-micrometer mesh → Diameter: 185 mm, Length: 385 mm, or as specified Option: → Optional dust explosion-proof design (ATEX) Material of sieve: stainless steel Material of coarse material outlet: steel coated Inlet: max Outlet: Outlet 2:

Condition: good (used), functionality: fully functional, machine/vehicle number: C7154, Powtek - gericke rotary sieve housing: steel rotor: steel inlet: stainless steel Ø300mm outlet: stainless steel Ø300mm transition sieve deck: nylon sieve deck 2mm Bedpfx Aovz Smmedrjli coarse outlet: adjustable

Condition: good (used), Year of construction: 2017, 5-Axis CNC Machining Center MAKA DC 7 2 units of MAKA DC 7 for sale. High-performance CNC machining center for 5-axis machining of composite, GRP, and CFRP components, designed with a fixed portal structure. The machining unit is horizontal, and the table is arranged vertically. Machine type: MAKA DC7 Year of construction: 2017 Number of tables: 1 x rotary table for tandem operation Technical data: Travel distances: X-axis: approx. 3,900 mm Y-axis: approx. 1,300 mm Z-axis: approx. 900 mm A-axis: 270° C-axis: 540° Speed: X- / Y- / Z-axis: 60 m/min. A- / B-axis: 10,000°/min. Acceleration: X- / Y- / Z-axis: 3 m/sec² Cube dimensions (working area): X-axis: 2,000 mm Y-axis: 1,000 mm Z-axis: 500 mm Working area (cube dimensions) with a total tool length of 160 mm and a tool diameter of 160 mm. Table design: 1 x steel frame rotary table with dimensions: 1,000 x 2,000 mm. Max. table rotation time: 3 sec. Rotary table with center partition. While one side is being machined, the second side can be loaded or unloaded. 8 units of zero-point clamping systems, 4 units per table side, for quick fixture changes. Vacuum supply: 2 vacuum clamping circuits per table, with vacuum distribution unit, quick-release couplings on the table. 2 vacuum pumps, 1 per table, frequency-controlled, suction capacity approx. 100 m³/h, vacuum tank 250 liters, including frame. Universal head for 5-axis milling with a 90° head and tool change milling spindle C-axis (rotary axis) 540° (+/- 270°) A-axis (swivel axis) 270° (+/- 135°) Speed: 10,000°/min 1 milling spindle HSD Asynchronous motor, water-cooled for tool holder HSK-F63 max. power 12 kW (S1) / 15 kW (S6) max. speed 24,000 1/min Torque support with air supply for angle heads. 1 compressed air nozzle on the milling head, controllable via M-function. Tool changer: 1 carousel tool magazine with 12 positions, mounted on the side. 6 x positions: for tools up to 60 mm in diameter 5 x positions for angle heads and probing system 1 x position for saw blade up to Ø 350 mm. Blsdezgtyhopfx Adrji Control system: 1 machine control system Siemens SINUMERIK 840D SL User memory: CNC 3 MB Control panel with 15" display with graphic color LCD, foil keyboard, and mouse. Drives: Rack and pinion drives in the X and Y axes, ball screw drive in the Z axis, A/C axis with hollow shaft drive. Safety: 1 soundproof cabin, with maintenance door, including interior lighting. 1 automatic high-speed roller shutter door. Accessories: Chip guide plates inside the protective enclosure. Extraction system in the working area, to be connected to the extraction system. Receiver for 3D measuring probe. Tool breakage monitoring system. Both machines are assembled and ready for operation and can be inspected. An extraction system from Keller Absaugtechnik, including complete piping, is available. This extraction system was designed for 2 x MAKA DC 7 and is also for sale. We would be happy to prepare an offer for you!

Year of construction: 1991, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 70024-A8006742, Kek type 800 Designed for high-capacity screening at rates of up to 40 tons per hour. - inlet: 250x250mm - outlet: - outlet 2: - motor: 4kW - screen: included Bledpezgtxwsfx Adroi - material: steel

Condition: used, functionality: fully functional, ISC Recycle offers you a used, high-performance, and carefully selected refrigerated compressed air dryer to guarantee clean and dry air in your industrial networks. Model: PARTENAIR EVO-BLUE-145 Condition: Used Bledpezgtdgsfx Adrei Dew point: +3°C under pressure (ISO 8573-1: 2001 Class = 4) Technology: Proportional power regulation for perfect dew point stability Refrigerant: Environmentally friendly refrigerant with low global warming potential (GWP) Performance: Extremely low pressure drop, guaranteeing optimal energy savings Do not hesitate to contact us for more information.

Condition: new, RT250-8/3-RH-50-4, RT250, Taktomat drum curve rotary table with motor Model: RT250-8/3-RH-50-4 Type: RT250 Condition: New Bjdpferazi Eex Adrjli

Condition: as good as new (ex-display), DES190 + MSM031C-0300-NN-M0-CH0, Zimmer-Group, AC servo motor and rotary module Blodpfxevrf D He Adrji Model: AI00367288 + R911325139 Type: DES190 + MSM031C-0300-NN-M0-CH0 Condition: As good as new

Condition: new, RT160-8/3-320-RH-50-4, RT160, Taktomat drum curve rotary table with motor Model: RT160-8/3-320-RH-50-4 Type: RT160 Blsdpfxsrazkxe Adroi Condition: New

Condition: new, RT200-02-320-RH-20-4, RT200, Taktomat drum curve rotary table with motor Bjdpfx Adjrazk Roroli Model: RT200-02-320-RH-20-4 Type: RT200 Condition: New

Condition: used, RZ 6, Vacuubrand, vacuum rotary vane pump Model: RZ 6 Blodpfx Adjvrf Aisrei Condition: Used

Condition: like new (used), Year of construction: 2012, functionality: fully functional, year of last overhaul: 2024, very good condition, regular service done production capacity 400kg/hour complete briquetting line (RUF press already sold), INDIVIDUAL MACHINES (price: x 1000 eur) : dryer 35 Bledpfjxu Ryujx Adrei crusher / knife mill - 7 wood waste boiler 5 feeder auger 6m 6 m 3,8 belt conveyor 2 pcs 2 Stk. 2,7 sorter with hopper 4,5 screw conveyor 6 pcs 6 Stk. 6,4 exhaust fan with cyclone 1 hopper with drive 2pcs 2 Stk. 6 wrapping machine 3,5 wet sawdust tank 1 fuel tank 1

Condition: used, Rotary table disc conveyor 1700-1600-Ø1500 with ejector 1330-100 RA2025 Technical data rotary table: Length table: 1700 mm width table: 1600 mm diameter turntable: 1500 mm Blsdpfx Adorc D Nreroi Overall height: 100 mm Adjusted table height: 790 mm, can be moved down to 590 mm Electrical data SEW motor: 380-415 V, 0,37 kW Electrical data drum motor: 24V Technical data diverter: Length/ belt length: 1330 mm belt width: 100 mm overall height: 840 mm Electrical data: 380-415 V, 0,25 kW Included in delivery: Turntable with feet Side guide Ejector with stand Optional: Light barriers 24V power supply for drum motor control cabinet/control Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 1969, rotary table diameter 1000 mm grinding height 500 mm grinding head - power requirement 15/5,5 kW total power requirement 30 kW weight of the machine ca. 18 t dimensions of the machine ca. m S I E L E M A N N (Germany) Hydraulic Rotary Table Internal and Face Grinding Machine with two grinding heads and with horizontal workpiece clamping Model RFsB 100 Year 1969 / fully reconditioned by the manufacturer in 1990 _____ Max workpiece Ø 1,000 mm Max. height of workpiece, approx. 400 mm Mounting height under grinding spindles approx. 500 mm Grindable Bore Ø, approx. 50 – 900 mm Max. Workpiece weight approx.. 900 kg Distance between Table bore and column 1.150 mm Table Ø / Face plate Ø, approx. 1,000 mm Table speeds, hydraulic, infinitely variable, right/left 5 – 60 rpm Table/workpiece infeed, 5 steps 0.0025 – 0.025 mm/stroke Table stroke approx. 500 mm Distance between grinding spindle and machine body 600 mm Surface Grinding Head Ø (Segmented wheel) 450 mm Grinding slides stroke, max. 500 mm Grinding slide speeds, infinitely variable 0.2 – 1 m/m Max. Internal Grinding spindle Ø 140/100 mm Grinding cup wheel Ø, up to approx. 200 mm Motor for Surface Grinding 15 kW / Motor for Internal Grinding Spindle 5,5 kW Total electrical load, approx. 30 kW - 380 V - 50 Hz Weight, approx. 18,000 kg Accessories / Special Features • The rotary table carries the workpiece and is also actuating the automatic grinding infeed • The relevant Grinding head can be swivelled in by turning the Column (hydraulic lift) so the workpieces can be ground in one setting with exact angles. • Built-on magnetic face plate, Ø approx. 1,000 mm, with 5 T-slots and stepless adjustment for the magnetism Bodpfx Aou Su Apsdrjli • Automatic workpiece infeed, with automatic depth stop. • Separate Height adjustment of internal grinding head, Grinding spindle Ø 100 mm. • Dressing devices mounted on each grinding head, Separate Switch Cabinet and hydraulic unit, • No Coolant Device available This machine is ideal for grinding bulky and heavy workpieces like housings, gears (!) bearing rings, cylindrical knives, etc. Condition: Good. Machine can be inspected soon under power Delivery : Ex stock as inspected. Payment : Net, after conclusion of contract.

Year of construction: 1980, condition: used, table length 2000 mm table width 1800 mm table load 12,5 t Bledet Hwq Rjpfx Adrei total power requirement 10 kW weight of the machine ca. 7,5 t dimensions of the machine ca. m Table size approx. 2,000 x 1,800 mm Max. weight of workpiece, approx. 12,500 kg Table travel, longitudinal 1,250 mm Table height above floor 920 mm Longitudinal feed 0.63 - 2,000 mm/min Turning feed, with Ø 1,000 mm 1 - 3,150 mm/min Longitudinal quick feed 2,000 mm/min Turning quick feed, with Ø 1,000 mm 3,150 mm/min Weight of machine 7,500 kg External dimensions of machine 3,700 x 2,100 x 920 mm Total electrical load 10 KW - 180 V - 50 Hz Accessories / Special Features * Telescopic covers for the guides. * Infinitely variable table feed. * Optical display for setting and reading the longitudinal adjustment. * Optical display for setting and reading the angle. Condition : Satisfactory to good. Machine can be inspected under power. Delivery : Ex stock as inspected Payment : Net, after conclusion of contract Thank you for your interest.

Condition: like new (used), Year of construction: 2022, operating hours: 9,900 h, INVERTER COMPRESSOR GA 75 VSD, IN LIKE-NEW CONDITION (WE ARE AN OFFICIAL DEALER). NEW UNIT LIST PRICE: EUR 96,968. MAIN FEATURES: MAXIMUM PRESSURE: 13 BAR POWER: 75 kW / 100 HP FLOW RATE: 13,500 LITERS/MINUTE Bsdpfx Aszdf U Todreli

Condition: used, Rotary valve, rotary airlock Bjdpozddq Hefx Adroli Manufacturer: TrennSo Type: AS 600x1400-6 Working width: approx. 1400 mm Rotor with flexible, replaceable rubber lips With free shaft end, without drive Condition: unused

Condition: used, Can be used for pre-shredded plastic waste (hard plastic, film), Throughput approx. 0.5-2 t/h depending on material type Drive power 30 kw Bsdjzddqmepfx Adreli A total of four dryers of this model are available.