Used Rotary Dryer for sale (5,353)

Condition: new, neu ca. 2 - 4 Wochen ab Auftr Türkei 24400 € 468.48 € 3000 kg 150 mm 150 mm 360 ° 135 kgm 400 / 50 V / Hz 1.1 kW Dkedex Urqdopfx Ac Neh 1.1 kW 1200 mm 700 - 950 mm The hydraulic positioners are available in standard sizes for load capacities from 1.000 kg to 3.000 kg. The frame is optimally designed for rotation and tilting operations. The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected. For heavy workpieces, the positioners are mounted to the floor. Tilting and rotation are controlled by steel gears. For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. The rotation speed can be adjusted via a potentiometer.

Condition: new, Year of construction: 2025, neu 2025 020157 prompt, Zwischenverkauf v Türkei 6320 € 121.98 € 1 250 kg 150 mm 150 mm 360 ° 360 kgm 230 / 50 V / Hz 0.37 kW 0.25 kW Dksdpfx Aox Urpmsc Nsh 0.1 - 3 U/min 30 s 600 mm M16x6 mm 550 mm The positioners are available in standard sizes for load capacities from 150 kg to 3,000 kg. The frame is optimally designed for rotation and tilting operations. The positioners consist of a motor, gearbox, table tilting system, steel gears, and control system and are structurally optimally protected. For heavy workpieces, the positioners are mounted on the floor. The tables have radial T-slots that enable quick clamping of the workpieces. Tilting and rotation are controlled by steel gears. For safety, the positioner is equipped with a reduction gear that holds the table in the desired position. Foot pedal Cable for signal to welder Touchpanel for following functions: - rotation speed - operating modi (manual, segmentcycle, full circle) OPTION: Pneumatic centering attachement

Condition: used, Year of construction: 2008, - Manufacturer Efsen/Cefla - Type Woodcure 1400 - Year of manufacture UV 2008, transport/conveyor 1998 - Working width 1,300 mm (1,445) mm - Working height 870 + - 20 mm - Max. part height 70 mm - Number of tubes from above 2 pcs. - Straight tubes 2 pcs. - Tube power 120 W/cm - Suitable for mercury tubes - Suitable for gallium tubes - Manufacturer of transport system Cefla - With cross bar conveyor - Bar spacing 95 mm - Feed adjustable via hand wheel ~ 5-25 m/min - Installation length: 3,500 mm - Width: approx. 2,100 mm - Volts, Hz 400 /50 - Total electrical connection 38 kW Dodevupdcjpfx Ac Nskh - Voltage fluctuations max. +/- 5%

Condition: excellent (used), The machine is ready for operation. Gate size: 110 cm height and 97 cm width. Dksdpfx Asycx Hmoc Noh

Condition: new, Year of construction: 2022, functionality: fully functional, Wema Probst RHM 250 II-H milling machine NEW Dkjdjubbryopfx Ac Njh - Diameters from 100mm to 250mm - Electronic feed control - 2 milling heads - Head 1 = diameter 150-300mm - Head 2 = diameter 100-250mm - feed speed 6-34m/min - complete electrical cabinet + control panel Wema Probst RHM 250 II-H milling machine NEW - Diameters from 100mm to 250mm - Electronic feed control - 2 milling heads - Head 1 = diameter 150-300mm - Head 2 = diameter 100-250mm - feed speed 6-34m/min - complete electrical cabinet + control panel

Condition: ready for operation (used), Year of construction: 2010, operating hours: 80,000 h, functionality: fully functional, machine/vehicle number: C0124000243, volume flow: 250 m³/h, power: 7 kW (9.52 HP), input voltage: 400 V, rotational speed (max.): 1,395 rpm, Rotary vane vacuum pump. In use until January 2025. Maintenance was carried out every 6 months. Last maintenance on June 13, 2024. Dedpovz Almjfx Ac Nskh

Condition: ready for operation (used), Year of construction: 2008, operating hours: 100,000 h, functionality: fully functional, machine/vehicle number: C0107000822, volume flow: 250 m³/h, power: 7 kW (9.52 HP), input voltage: 400 V, input frequency: 50 Hz, rotational speed (max.): 1,470 rpm, Rotary vane vacuum pump. In use until January 2025. Maintenance was carried out every 6 months. Last maintenance on June 13, 2024. Dkedpfx Aovz Ahbec Noh

Condition: reconditioned (used), Year of construction: 2004, AUTOMATIC WINDMILL PRESS WITH MECHANICAL LOCKING AND FEEDING AFTER A COMPLETE RENOVATION Dsdpfx Acjlnanwe Njkh

Condition: used, functionality: fully functional, Year of construction: 2006, Drive via 0.37 kW geared motor Getriebebau-Nord Speed: 1,390 / 13 rpm Dodpfx Acjw U Tmfo Njkh

Condition: used, Year of construction: 2018, machine/vehicle number: 318113001, The machine has been partially overhauled and tested. - Manufacturer: Cefla - Model: UV-R3 - Year of manufacture: 2018 - Working width: 1300 mm - Workpiece height: ~ 3 - 70 mm Dkodpfxsx Tpx Ae Ac Nsh - Number of top lamps: 3 pcs. - With rod conveyor - Rod spacing: 60 mm - Suitable for mercury lamps - Suitable for gallium lamps - Lamp power: max. 120 W/cm - Connected load: 56 kW / 104A - Voltage, Hz: 400 / 50 - Control cabinet integrated under the machine - Feed speed adjustable: ~ 1.25 - 21.25 m/min - Length: ~ 3,500 mm - Width: ~ 2,700 mm - Height: ~ 1,600 mm - Exhaust air volume: 3,600 m³/h - Location: in stock - Voltage, Hz: 400 / 50

Condition: used, Security driver for Rotary heart Diameter 200 mm Bolt circle diameter 133 mm Dkedpfodb Uy Ijx Ac Nsh Cone 106 mm

Condition: new, Year of construction: 2025, functionality: fully functional, load capacity: 1,000 kg, Column lift rotary device 1 tonne load capacity Protec turning device / positioner Syncrolift Double column, remote control wireless and manual Column adjustment: 2x movable Load capacity: 1000 kg Dkodpfox Th N Hjx Ac Noh Minimum working height: 600 mm Maximum working height: 1500 mm Speed: 1 rpm Clamping plate diameter: 500 mm Rotary drive: 0.37 kW Upon request, 2 to 10 tonne load capacities available

Condition: like new (used), Year of construction: 2020, operating hours: 2,900 h, functionality: fully functional, cloos robot Qirox 350 incl. control QC 2 touch sensor, seam tracking, point editor rotary gallow welding machine cloos qineo puls 451, wirde drive, torch, torch hose package Dodox Iu R Hopfx Ac Nskh 2 light beams, 2 start pre selections manipulators on request

Condition: used, functionality: unexamined, Tirini Peon 4.7 M Bridge Mounted Rotary Head Surfacer on 3M Rails Dksdpfsyb Tctex Ac Nsh

Condition: like new (used), Year of construction: 2019, operating hours: 3,500 h, functionality: fully functional, clamping force: 1,000 kN, screw diameter: 30 mm, overall weight: 9,280 kg, ENGEL e-insert 310V/100 rotary, equipped with RD 1.600 rotary table and ENGEL easix articulated robot, as well as CC300 microcomputer for centralized control of the machine and robot. Standard mold installation specifications: minimum mold height 250 mm, opening stroke 350 mm, maximum platen distance 600 mm. Hydraulic drive option ECODRIVE - SHV2. Materials to be processed: POM 30–40% GF, Hostaform C9021. ENGEL e-insert: The vertical machine for specialized tasks requiring increased precision. This machine concept offers optimal conditions for overmolding or assembling pre-fabricated components (metal, glass, electronic modules, plastics), ensuring part retention in the mold and reducing cycle times. Included in the package: highest injection process precision due to the servo-electric injection unit, as well as outstanding energy efficiency from ENGEL ecodrive. Dkodpfx Asyb Smkoc Neh

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, rotary table diameter: 1,000 mm, grinding height: 500 mm, table diameter: 1,000 mm, CNC rotary table grinding machine with 1000 mm magnetic chuck, turret carrier with 3 grinding spindles (external, face, and internal grinding spindle). CNC control Sinumerik 840C, Simodrive 611 drives, coolant tank, currently still in operation, now being dismantled. Delivery also possible as overhauled and with new electrics upon agreement. Total weight 20,000 kg. Dsdpfxjwv Sc Ao Ac Nokh

Condition: like new (used), Year of construction: 2021, operating hours: 10 h, functionality: fully functional, machine/vehicle number: ABT 1/2000-8, type of input current: AC, overall weight: 4,200 kg, input voltage: 400 V, input frequency: 50 Hz, The 2 tons/hour Belt Dryer System (model ABT 1/2000-8) is an industrial drying unit manufactured by ASOS PROSES MAKİNA SAN. VE TİC. A.Ş. (Turkey). It is designed for the continuous drying of granular or particulate materials such as pet food, cereals, grains, feed, agricultural products, and similar bulk goods. The system operates indoors on a single production line, 24 hours per day, under ambient temperatures of 5–35 °C and relative humidity between 60–80 %, at sea level. The machine is engineered to reduce moisture content from 28 % to 12 %, with a feed rate of 2,000 kg/h, evaporating 364 kg of water per hour, and delivering a dry output of 1,636 kg/h. It requires 364,000 kcal/h of thermal energy, typically provided by combustible gas, with a drying temperature range of 50–60 °C. Total electrical consumption is 37 kW, with 46.2 kW installed power, powered at 400 V / 3-phase / 50 Hz, and an estimated nominal current of ≈ 78.5 A. Noise levels are below 85 dB(A) at 1 m. The required installation space is 4 m (width) × 10 m (length) × 4 m (height). The Belt Dryer unit has a drying surface of 16 m², a belt width of 2,000 mm, and a length of 8,000 mm. It uses a single-pass polyester belt. Both upper and lower casings are made of galvanized steel with rock wool insulation on heated surfaces. Inspection hatches and instrument sockets are provided on both sides for easy access and monitoring. Dedsyb Rpdopfx Ac Nskh The system includes a spreader unit for uniform material distribution, a burner chamber (400,000 kcal/h, carbon steel), and a set of circulation and exhaust fans (galvanized steel, direct drive, VSD). Multiple motors (totaling 46.2 kW) drive feeding, mixing, drying, ventilation, and heat exchange equipment. Control is managed through a floor-standing MCC and PLC cabinet (IP55, 600×4000×2200 mm), equipped with a Siemens S7-1500 PLC, 17" SCADA touchscreen (TP1900), Profinet communication, and ABB/Danfoss VSDs. All signal and power cables and galvanized trays are included, along with galvanized structural supports. The system is suitable for industrial-scale drying operations in the food, feed, agricultural, and processing industries, offering stable performance, low noise, and automated control. It is built for durability with galvanized steel construction, easy maintenance access, and optional on-site erection and commissioning by ASOS engineers. Delivery time is typically 10–12 months from advance payment, and the equipment is guaranteed for one year against material and manufacturing defects.

Condition: new, Cefla painting system Dsdewhbrwspfx Ac Nokh

Year of construction: 2025, operating hours: 100 h, condition: like new (used), functionality: fully functional, HMD-G200 — High-Performance Rotary Packaging Machine The HMD-G200 is a robust rotary packaging machine, purpose-built for the automatic filling and packaging of a wide array of products, ranging from fine powders to granular or chunky materials such as nuts, legumes, rice, seeds, or snacks. It merges high precision with intuitive operation, ensuring optimal production efficiency—an ideal solution for small, medium, and large-scale operations across the food, chemical, cosmetics, and pharmaceutical sectors. ⚙️ Main Features Fully Automatic Packaging Solution: Automated workflow from pouch feeding, opening, filling, and sealing to date coding—delivering uninterrupted and highly efficient production processes. Versatile Applications: Suitable for a comprehensive range of products: - Powders: e.g., flour, spices, protein powder - Granular products: e.g., lentils, beans, rice, nuts, snacks, seeds - Granulates or blends Compatible with Pre-Made Bags: Handles high-quality pre-formed pouches made of multilayer laminated film or paper—with or without zipper. Precise Dosing: Features an integrated auger filler or optional volumetric dosing for precise filling by weight—with an accuracy of ±0.3–1.5%. Intuitive Control: Equipped with a modern SIEMENS touch screen for complete management of all parameters via a user-friendly interface. Djdpoxqccmjfx Ac Njkh Hygienic Stainless Steel Construction: All product-contacting components are made from 304 or 316 stainless steel, are compliant with international hygiene standards, and are designed for easy cleaning. Safety & Efficiency: Automatic error detection prevents sealing defects or product loss. Integrated alarms for air pressure, overload, and pouch handling ensure maximum operational safety. 🔩 Technical Specifications Parameter Value Model HMD-G200 Packaging speed 5 – 55 bags/min Bag size Width: 90–200 mm / Height: 150–350 mm Bag type Pre-formed pouch, with or without zipper Power 2.1 kW Power supply AC 380 V ±10%, 3-phase, 60 Hz Air pressure 5 – 8 kg/cm², Air consumption 0.4 m³/min Noise level ≤ 80 dB Bag opening Vacuum system Additional features Date coding, nitrogen flushing, vibration, air evacuation 🧠 Key Components from Industry-Leading Brands Component Brand Touch screen & Control SIEMENS Frequency inverter Bosch Rexroth Temperature controllers & Relays OMRON Pneumatics & Valves AIRTAC / Festo Vacuum pump ORION 🚀 Included in Scope of Delivery - Auger filler for powders and fine granular products - Stainless steel screw conveyor for automated product feeding - Integrated date coder - Horizontal conveyor belt for finished pouch discharge 💡 Your Key Advantages ✅ Reduce labor costs through full automation ✅ High throughput with consistent, repeatable quality ✅ Flexible configuration for powders, nuts, pulses, and blends ✅ Hygienic, robust, and easy to maintain ✅ Simple, intuitive operation with intelligent Siemens controls

Year of construction: 2010, condition: excellent (used), Wachtel Compact 1.8 rotary stove - used - year of production 2010 - with STIR system - gas burner - for metal sheets 58 x 78 - fully assembled - digital control - good technical condition - 3 pieces on offer Dsdergn Tvspfx Ac Nekh - Price for inquiry

Condition: excellent (used), For sale: CNC rotary table from the renowned brand Fadal Engineering (USA), model VH65. Professional 4th axis designed for machining centers, especially Fadal VMC, but integration with other CNC machines is also possible using the appropriate controller. Technical specifications: • Model: VH65 • Table diameter: 165 mm (6.5”) • Gear ratio: 90:1 • Pneumatic brake (M60 ON / M61 OFF) • Industrial multipin connector • Serial no.: 4630298 Condition: used, mechanically functional, normal signs of operation. Solid and heavy construction – ideal for precise 4-axis machining. Djdpfxsw R St Ns Ac Nekh

Condition: used, Year of construction: 2008, functionality: fully functional, Used HAAS rotary table model HRT310 complete with HAAS pneumatic drive and tailstock. Dodpfxewu Uahe Ac Nskh

Year of construction: 2026, condition: reconditioned (used), functionality: limited functionality, machine/vehicle number: 559, Dryer optimized for thick timber or hardwood Usable length: 5000 mm Usable height: 1100 mm Usable width: 1100 mm New electrical cabinet and sensors Controlled drying function Djdpfxoya Ik Ao Ac Njkh Missing external rail and trolley (can be supplied or we will assist the buyer with fabrication) Dryer can be inspected in department 74

Condition: new, Year of construction: 2025, pipe diameter (max.): 60 mm, bending radius (max.): 200 mm, PLACE OF PRODUCTION : TURKEY WARRANTY PERIOD : 12 MONTHS Dkedsvn Euqepfx Ac Neh Steel pipe capacity 60 x 3 mm Easy one-touch control allows any operator to program and automatically save the bending angle Single bending speed Start the bending cycle from the control panel or the built-in foot pedal Designed on a wheeled, handle-mounted cabinet for easy portability.

Condition: new, Year of construction: 2025, pipe diameter (max.): 76 mm, bending radius (max.): 200 mm, PLACE OF PRODUCTION: TURKEY WARRANTY PERIOD: 12 MONTHS Steel pipe capacity 76 x 3 mm Maximum 200 mm Bend to CLR as small as 2 x Ø Touch screen programming of bending angle with multilingual system diagnostics Quick change tool system Digital display of bending angle Dksdsvn Euwepfx Ac Noh Material springback compensation Foot pedal control for hands-free operation