Used Smg for sale (18)

Condition: used, Year of construction: 1997, Pressure 500 t distance between columns 1550 mm stroke 600 mm distance table/ram, max. stroke up, adjustment up 900 mm table surface area 1200 x 1300 mm Ledpfx Ajvuk T Esb Ujhn pressure of drawing cushion in table 250 t stroke of drawing cushion in table 150 mm die cushion area 950 x 950 mm table height over floor 1245 mm side window 1250 mm ram surface 1200 x 1300 mm speed down 750 mm/s speed up 780 mm/s working speed 105 mm/s oil volume 4000 l power requirement 263,0 kW weight 45,0 t Dimensions (WxDxH) 3,3 x 3,3 x 6,1 m height over floor 6,1 m YOM 1978 - overhaul 1997 permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table, pneumatic ejector in ram (0,5 t), cutting impact cushioning with depth stop (motoric adjustable), mechanical ram interlocking in TDC as is where is, WITHOUT putting into operation

Condition: used, Year of construction: 1989, Pressure total: 1400 ton Stroke: 950 mm Daylight: 2000 mm Table surface area : 3600 x 2500 mm Slide area: 3600 x 2500 mm Die cushion capacity in table: 400 ton Die cushion stroke: 500 mm Die cushion pad area: 3060 x 1860 mm Approach speed: 400 mm / sec Lhjdpfxouqdi Uj Ab Uen Working speed: 40 / 80 mm / sec Return speed: 400 mm / sec Oil volume: 5000 l Required power: 450 kW Weight of machine approx.: 240 ton Standard configuration with hydraulic tool clamps on the ram

Condition: used, Double column hydraulic press SMG type HBP 200 - 2000 / 2000 make no. 7.4117 year of construction 1986 - rebuild 2000 pressure force 200 ton. Stand passage front 2050 mm column passage sideways 2030 mm table area 2800 x 2000 mm ram area 2000 x 2000 mm ram stroke 700 mm installation height max. 1850 mm Table height above floor 750 mm ram retraction force 33 ton. Rapid feed speed 500 mm/s Lhjdpfedzp Tcsx Ab Usn Pressing speed 72/36 mm/s Return stroke speed 420 mm/s Safety distance 230 mm Motor power main motor 75 kW Motor power control pump 11 kW Mains connection 380 Volt, 50 Hz - 8-fold flat guide for the ram - Clamping plate with 22 mm T-slots at the ram, 2000 x 1900 mm, thickness 60 mm - Hydraulic ram locking at TDC - Measuring system with glass scale - Electrical control renewed in 2000 with SIEMENS SPS S7 - adjacent switch cabinet - 2-hand control panel adjacent - ground level installation - central lubrication - Operating instructions with circuit diagrams Space requirement of the press standing L x W x H 3700 x 2900 x 5900 mm Machine height complete with motor 5900 mm Space requirement for horizontal transport L x W x H 5900 x 3250 x 2950 mm weight 38 ton. The machine was used as a production press at Volkswagen until 2000. From 2000 the machine was used as a tool testing press in a tool shop. good condition

Condition: used, Year of construction: 1970, machine/vehicle number: Lager-Nr.: 2298, Force: 100 tons Windows: 500mm Daylight: 800mm Distance between columns: 1260mm Table height over floor: 1450mm Table: 1250x1000mm Ram: 1250x1000mm Lodpodc Dcqofx Ab Ushn Speed: Down: 400mm/sec. Work: 72mm/sec. Up: 300mm/sec. Stroke: 500mm Die cushion: 40 tons, stroke: 250mm Requested power: 50PS Weight: 22 tons Height: 4500mm Control Siemens S7 Sick light guards Floor standing

Condition: excellent (used), functionality: fully functional, total height: 2,500 mm, total width: 1,230 mm, total length: 570 mm, pressing force: 40 t, table width: 600 mm, table length: 400 mm, overall weight: 4,000 kg, working height: 400 mm, stroke length: 150 mm, Hydraulic press SMG DS40 Year of manufacture: 2000 Force: 40T Table size width/depth: 600 x 400 mm Clearance: 400mm Slider/cylinder stroke: 150 mm Dimensions press (height x width x depth): 2500-1230-570 mm Weight: 4 tons The press is from closed stamping plant located in Poland,. Still connected to the power supply. Possibility to check the machine in operation. Lhsdpfx Abjwiudpo Usn The press are in very good condition

Year of construction: 2008, condition: excellent (used), SMG HZPU 8000-3000/2100-S1 Hydraulic Drawing Press Brand SMG Lhedpfxen Awd Re Ab Uon Type HZPU 8000-3000/2100-S1 Year 1995 Description Hydraulic Drawing Press H frame hydraulic press Pressing force 800 ton Clamping area Approx. 3,000 x 2,100 mm Installation height Max. 1,400 mm

Condition: used, Year of construction: 1977, pressure 250 t distance between columns 930 mm stroke 200 mm Lhodpfx Asvuk Treb Uon Distance table/ram, stroke up 600 mm table surface area 900 x 860 mm die cushion capacity 100 t die cushion stroke 50 mm die cushion area 350 x 400 mm table height over floor 950 mm side window 380 x 380 mm ram surface 850 x 700 mm feed down 400 mm/s feed up 400 mm/s working feed 30 mm/s oil volume 350 l power capacity 45,0 kW weight 11,5 t Dimensions (WxDxH) 2,0 x 1,2 x 3,4 m permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with oilhydraulic drive, controllable dependent on pressure/time and way, hydraulic drawing cushion in table, mechanical depth stop with hydraulic cutting impact cushioning no foundation pit necessary as is where is, WITHOUT putting into operation

Condition: new, Year of construction: 2023, functionality: fully functional, machine/vehicle number: 580, cutting length (max.): 5,180 mm, total length: 6,400 mm, overall weight: 580 kg, gas-powered mobile saw SMG EUROPA 1000 - rigid structure 100% steel - 100% welded HONDA 25 hp - 800 cm3 engine max. diameter 100 cm - sawing length 518 cm max opening between rollers 71 cm 35mm blades - 22.2 mm pitch - length 4245mm. Blade height locked by electric cylinder; manual positioning handwheel with return spring for fast, precise work. push feed specific trailer for moving to cutting area (optional) Optional sharpening/cleaning kit for blade maintenance optional hydraulic cylinder for taper adjustment Lhodpfx Aoq H H E Nsb Uen extensions and additional rail for cutting long lengths immediate availability

Year of construction: 1978, condition: used, pressure 40 t distance between columns 600 mm stroke 150 mm table surface area 600x410 mm Ledsq Rhkwepfx Ab Uehn ram surface 220x130 mm table height 850 mm weight of the machine ca. 2,5 t

Condition: excellent (used), functionality: fully functional, pressing force: 150 t, table width: 1,000 mm, table length: 850 mm, Equipment: safety light barrier, SMG P 79 press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2016. New Simatic S7 control system and new electrical cabinet. Optical barriers installed. Lhjdpev E Eppsfx Ab Uon Possibility to check the machine in operation - The press is still connected to the power supply. SMG P 79 press A press in very good technical condition for sale from a liquidated stamping shop in Poland Modernized in 2016. New Simatic S7 control system and new electrical cabinet. Optical barriers installed as well. Possibility to check the machine in operation - The press is still connected to the power supply.

Condition: used, Year of construction: 1979, pressure 63 t stroke 200 mm throat 320 mm Lhodpfsvzxrcox Ab Uen dayligth 450 mm table surface area 750 x 600 mm die cushion capacity 6,5 t die cushion stroke 80 mm die cushion area 240 mm table height over floor 800 mm ram surface 500 x 450 mm feed down 300 mm/s feed up 300 mm/s working feed 50 mm/s oil volume 380 l power requirement 12,0 kW Weight 6,5 t dimensions of the machine ca. 1,3 x 2,0 x 2,75 mxmxm with oil-hydraulic drive, hydraulic drawing cushion in table, hydraulic ejector in ram (approx. 0,5 t / 70 mm), hydraulic cutting impact cushioning, mechanical depth stop as is where is, WITHOUT putting into operation Price for commissioning (in given condition) on request

Condition: new, Year of construction: 2023, cutting length (max.): 5,000 mm, total length: 64,000 mm, power: 0.007 kW (0.01 HP), Horizontal log band saw SMG - Canada max. diameter 600mm - cutting length 5 m Ledpfoq R Svqox Ab Uohn kolher petrol engine 9.5 hp max opening between rollers 450mm 3mm x 3665mm blade - 165 teeth 22.2mm pitch

Year of construction: 1978, condition: used, pressure 25 t distance between columns 580 mm stroke 150 mm dayligth 370 mm table surface area 560x400 mm ram surface 400x350 mm hole in the table 80 mm Lsdpfxolp U Are Ab Uehn weight of the machine ca. 2,5 t dimensions of the machine ca. 1500x500x2500 m

Condition: used, Year of construction: 1992, Pressure 200 t distance between columns 1910 mm stroke 600 mm distance table/ram, max. stroke up, adjustment up 800 mm table surface area 1900 x 1150 mm pressure of drawing cushion in table 80 t stroke of drawing cushion in table 300 mm die cushion area 1500 x 950 mm table height over floor 800 mm side window 1000 mm ram surface 1900 x 1100 mm Lhjdovuui Repfx Ab Uen return capacity 36 t speed down 400 mm/s speed up 170 mm/s working speed 30,5 mm/s oil volume 1500 l height over floor 4,85 m height beneath floor 2,6 m power requirement 45,0 kW weight 38,0 t dimensions (WxDxH) 3,05 x 2,8 x 5,55 m year of manufacture 1975 - modernization 1992 permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, hydraulic drawing cushion in table, ram interlocking can be offered without putting into operation, with putting into operation in given condition or alternatively with new control Siemens S 7-1500 F

Condition: used, Year of construction: 1978, pressure 800 t distance between columns 3010 mm stroke 300 mm distance table/ram, max. stroke up, adjustment up 1350 mm table surface area 3000 x 1800 mm table height over floor 500 mm side window 1500 x 1400 mm ram surface 3000 x 1800 mm Ljdjvuk Ipepfx Ab Uohn speed down 300 mm/s oil volume 900 l height over floor 5,4 m height beneath floor 2,1 m power requirement 200,0 kW weight 80,0 t Dimensions (WxDxH) 5,2 x 2,6 x 7,5 m hydraulic high-speed press with oil-hydraulic drive, controllable dependent on pressure/time and way, hydraulic cutting impact cushioning, mechanical depth stop (motoric adjustable), ram interlocking in upper position maximum stroke frequency 50/min (when using automatic feeding devices) as is where is, WITHOUT putting into operation, stored in dismantled condition

Condition: used, Year of construction: 1982, pressure 200 t distance between columns 2030 mm stroke 550 mm Distance table/ram, stroke up 1800 mm Lhjdpfxsvuk Hlo Ab Usn table surface area 2000 x 2800 mm table height over floor 760 mm ram surface 2000 x 2000 mm Side window 2000 mm feed down 400 mm/s power requirement 51,0 kW weight 33,0 t dimensions (WxDxH) 3,25 x 3,5 x 5,4 m Height above floor 5,4 m permitted only for safe tools or fixed screen according to the German Safety Regulations (UVV) with oilhydraulic drive, controllable dependant on pressure and way, ram interlocking no foundation pit necessary as is where is, WITHOUT putting into operation

Condition: used, Year of construction: 1978, pressure 100 t Ledpjvzxp Uofx Ab Uehn stroke 150 mm throat 345 mm dayligth 400 mm table surface area 1200 x 600 mm table height over floor 850 mm ram surface 560 x 500 mm feed down 350 mm/s feed up 350 mm/s working feed 25 mm/s oil volume 560 l power requirement 22,0 kW Weight 8,3 t dimensions of the machine ca. 2,1 x 1,7 x 2,8 mxmxm permitted for manual loading according to the German Safety Regulations (UVV) with oil-hydraulic drive, light guard (Sick), mechanical depth stop with hydraulic cutting impact cushioning, two-hand operation

Condition: excellent (used), Year of construction: 2021, functionality: fully functional, Drive station with frequency inverter and Siemens LOGO! controller For sale: complete drive station equipped with: • Three-phase electric motor with gearbox, • TEBMA frequency inverter for smooth speed regulation (operator panel, control inputs/outputs), Lodpexlngmofx Ab Ujhn • Siemens LOGO! TDE controller with operator panel and display, • Electrical protections, wiring, control box, • Sturdy workshop frame. The unit can be used as: • Training station for learning LOGO programming and inverter operation, • Test station for drive systems, • Auxiliary drive in a workshop or laboratory. Condition: very good, fully functional, ready for operation.