Used Rotary Dryer for sale (5,446)

Condition: used, Year of construction: 2012, Overview This industrial air dryer was manufactured in 2012 by the Swedish company Atlas Copco. The FD760 VSD model is a refrigeration-type dryer designed for continuous operation in compressed air systems up to 14 bar, with a maximum flow capacity of 760 L/s. The unit is still installed and connected, has been regularly maintained, with the latest maintenance completed in August 2025, and is in excellent operating condition. It is immediately available and can be inspected on site. Technical data  - Application: Air dryer for 7 7-bar low-pressure compressor Bdjdpfoxrnn Djx Adrsd - Flow Capacity: 760 L/s - Operating Pressure: Up to 14 bar - Power Supply: 5.6 kW - Refrigerant: R410A - Weight: 380 kg

Condition: used, Year of construction: 2014, Overview  The Gesete XT 500 bottle drying system was manufactured in 2014 and is designed for drying bottles upstream of a labeling machine (Etima). It removes residual moisture to ensure good label adhesion. Technical details - Manufacturer: Gesete - Model: XT 500 Bedpfx Adew N Nkperodd - Year of manufacture: 2014 - Application: Bottle drying before labeling (Etima)

Year of construction: 1988, condition: used, Eubama S5 Rotary Transfer Machine Bjdpfxsdg Da Ij Adrodd Serial Number 5531 Year 1988 Pristine Condition Not been used for 15 years

Condition: excellent (used), 36" Magnetic Table# Model No 18 Bdjdpfxszh Ngmo Adred

Condition: new, AGRE ALUP SCK 10-10 270+ Belt-driven. Space-saving. Cost-effective. Easy to operate. Perfect solution for industrial and craft businesses. Convincing compressed air quality. Refrigerant dryer installed. Sound-insulated screw compressor with belt drive on a 270 l compressed air tank, with integrated refrigerant dryer, integrated cyclone separator, electronic condensate drain, and C55 graphic control. Features in detail: Compression concept: Oil-lubricated screw compressor Cooling: Air-cooled Drive: Efficient IE3 motor, belt drive Control: Fixed speed Controller: Aircontrol 5.0 Refrigerant dryer: Mounted, refrigerant R513A Filtration: Incl. cyclone separator Tank: Horizontal, painted, manufactured according to AD2000 Performance data: Volume flow at operating pressure 9.5 bar = 1.06 m³/min Operating pressure min. / max. 5.5 / 10.0 bar Bjdpfx Aeixt H Njdrjdd Total power consumption at 9.5 bar / full load 10.2 kW Rated motor power; IP55 7.5 kW Oil quantity 4 liters Dimensions and weight: L x W x H = 1530 x 662 x 1531 mm Weight: 310 kg Compressed air outlet: G 1/2'' Compressed air tank capacity: 270 liters

Condition: new, Screw compressor AGRE Model Sonetteo 7.5+ 10 Compact screw compressor unit including refrigerant dryer and compressed air tank, 270 liters. Belt-driven. Space-saving. Economical. Easy operation thanks to the Infologic² Basic control system. Efficient compression stage. Perfect solution for industrial and craft businesses. Convincing compressed air quality. Refrigerant dryer installed. Detailed features: Compression concept: Oil-lubricated screw compressor Cooling: Air-cooled, efficient cooling system Drive: Efficient IE3 motor, belt drive Control: Fixed speed Control system: Infologic² Basic control unit Refrigerant dryer: Installed, refrigerant R513A Tank: 270 liters, horizontal, painted, 11 bar Motor power: 5.5 kW Pressure: 10 bar Delivery rate: 780 liters/min Including time-controlled condensate drain Bodpfehun Tzjx Adrsdd Dimensions L x W x H = 1500 x 1350 x 600 mm

Condition: used, Year of construction: 2009, CNC grinding machine Type/Model: Ri 8-4 Year of manufacture: 2009 Operating hours: 25,726 h Technical data Rotary table diameter: 800 mm Max. grinding/turning diameter: approx. 1,000 mm Max. grinding/workpiece height: approx. 700 mm to 800 mm Max. table continuous load: 2,000 kg Rotary table (C-axis) & guide Bearing: Hydrostatic guides in the X and C axes for maximum damping and wear-free operation Table drive: Direct drive Speed range: 0.01 to 200 rpm Positional accuracy: ± 1.5 arc seconds (smallest increment: 0.0001°) Tool holder & spindle (turret head) Number of spindle positions: up to 4 grinding spindles/tool positions in the automatically swiveling turret head CNC control & axis drives Bdsdjzh Hrtjpfx Adrjd Standard control: Siemens Sinumerik 840D with extended KERN grinding application software X-axis: Linear drive Travel distances (approximate values) X-axis (horizontal): approx. 1,200 mm Z-axis (vertical): approx. 700 mm Dimensions & weight Machine weight: approx. 18,000 kg + peripherals

Condition: new, -User-friendly operating concept -Efficient design for cost-effective and safe operation -Cooling fan speed-controlled from 0-100%, thus eliminating the need for the usual pressure switch and thermostat for fan control -Fewer wearing parts while maintaining a constant pressure dew point -Control system displays five different alarm states and stores them in memory -Refrigeration compressor shuts off below 15°C ambient temperature if no compressed air is flowing through -Clear layout and easy accessibility of all maintenance components -With built-in automatic condensate drain The advantages at a glance -High cost-effectiveness -Excellent price-performance ratio -No unnecessary compressed air losses thanks to the integrated electronic condensate drain -Connected tools and machines are optimally protected -User-friendly operating concept Manufacturer Aircraft Kompressorenbau und Maschinenhandel GmbH Gewerbestraße Ost 6, 4921 Hohenzell, Austria - Air flow rate l/min: 1200 l/min Bdodju T Hrvopfx Adrod - Air flow rate m³/h: 72 m³/h - Maximum pressure: 16 bar - Air connection: 1/2" - Power consumption: 0.2 kW Dimensions and weights: - Length (product) approx.: 325 mm - Width/depth (product) approx.: 430 mm - Height (product) approx.: 445 mm - Net weight approx.: 24 kg

Condition: used, KAESER TAH 6 Refrigeration Dryer - used - Bdedpfx Adewziflerjd ----- Technical Data ----- Maximum pressure: 16 bar, Power supply: 230 Volt

Condition: used, Year of construction: 2003, AVAILABLE from 08/2026 Bodpfxeyifwpe Adrjdd UV dryer, Cefla UV 2000 - Manufacturer Cefla/Sorbini - Type UV 2000 M2 / TTE2500 - Year of manufacture 2003 - Working width 1.300 mm (1.445) mm - Working height 900 + - 40 mm - Operating side right - Max. part height 70 mm - Number of tubes from above 2 pcs. - Straight tubes 2 pcs. - Suitable for mercury tubes - Suitable for gallium tubes - Tube power max. 120 W/cm - Bar transport - Length 2.500 mm - Width 2.300 mm - Height 1.500 mm - Volts, Hz 400 /50 - Total electrical connection 86 A / 36.4 kW - Voltage fluctuations max. +/- 5% Images are only examples of a machine of the same design*

Condition: used, Painting system consisting of: Pos.1 Venjakob belt conveyor - Manufacturer: Venjakob - Working width: 1,300 mm - Length: 3,000 mm - Feed adjustable via handwheel ~ 2.5 – 7.5 m/min - Volt, Hz: 400 / 50 - Colour RAL 7035 Pos.2 Cefla dust extraction machine - Manufacturer: Sorbini - Type: VS/32-E - Year of manufacture: 1998 - Working width: 1,300 mm - Working height: 900 mm + - 20 mm - Operating side: right - Roller conveyor Bdsdpov I Akvefx Adred - Air blowing channel, above 2 pcs. - Air blowing channel, below 1 pc. - Dust remover brush - With ionisation bar from above - With ionisation bar from below - With own drive - With own control - Length ~ 910 mm - Width ~ 2,600 mm - Weight 1,260 kg - Extraction nozzle D 180 + 120 mm - Total connection 7.6 kW - Volt, Hz 400/ 50 Pos.3 Venjakob VEN SRAY Perfect automatic spraying machine - Manufacturer Venjakob - Type. VEN SPRAY PERFECT - Year of construction 2013 - Working width 1,300 mm - Working height 940 + - 20 mm - Operating side left - IR preheating, number of radiators 2 pcs. - Duo-design spray gun drive - Dry suction - Diameter of suction nozzle 600 mm - Exhaust air capacity 10,000 m³/h - Belt transport system - feed speed infinitely variable ~ 4-10 m/min - conveyor belt cleaning system - paint recovery via V-belt system - gun control, EPS-CNC CNC 7000 - colour management system for number of pumps 3+1 pcs. - number of installed airless spray guns 4 pcs. - Quick-change system for spray guns - Remote maintenance system - Dust cover on the outlet side of the machine - Exhaust air recirculation system - Exhaust air control of the suction ventilator - Machine suitable for water-based paints - Machine suitable for solvent-based paints - Length 5,509 mm - Width 4,500 mm + 2,400 mm - Height 3,380 mm + 510 mm - Total connection ~ 20 - 26 kW - Volt, Hz 400/50 - Colour RAL 7035 - Kremlin AVX AirMix spray guns - Small parts container - gun support arm system for quick removal of 4 AirMix spray guns from the spray booth, including quick couplings for pneumatics and material hoses. Pos.4 Venjakob belt conveyor - manufactured by Venjakob - working width 1,300 mm - length 2,000 mm - feed adjustable via handwheel ~ 2.5 – 7.5 m/min - Volt, Hz 400 / 50 - Colour RAL 7035 Pos.5 Cefla pallet dryer - Manufacturer Cefla - Type VN 2000/5500/190.5/30 - Year of construction 2003 - Working width 1,300 mm - Number of pallets 30 pcs. - Pallet length 5,600 mm - Usable pallet length 5,300 mm - Load capacity per pallet 300 kg - Max. part height ~ 110 mm - Clearance between pallets 120 mm - Dimension: centre of pallet to centre of pallet 3,658 mm - Max. part length ~ 5,200 mm - Number of controllable temperature zones 2 pcs. - Supply air flow rate 6,000 m³/h - Exhaust air flow rate 6,000 m³/h - Heat output max. 175 kW - Max. drying temperature ~ 55 - 60 degrees - With heat exchanger, hot water - Without hot water control valves - U-shaped flow direction - Inlet side on the right - Feed speed via frequency converter control ~ 2-20 m/min - Suitable for water-based paints - Suitable for solvent-based paints - Length 7,820 mm mm - Width 6,130 mm - Height 3,905 mm - Total connection ~ 23 kW - Volt, Hz 400 / 50 - Voltage fluctuations max. +/- 5 % - Without control valves and water pumps Pos.6 Cefla belt conveyor - Manufacturer Cefla - working width 1.300 mm - length 2.000 mm - feed adjustable via handwheel ~ 2.5 – 7.5 m/min - volts, Hz 400 / 50 - colour RAL 7035

Condition: used, Year of construction: 2007, UV Dryer, Cefla UV 2000 - Manufacturer: Cefla/Sorbini - Model: UV 2000 M2 / TTE2500 - Year of manufacture: 2007 - Working width: 1,300 mm (1,445 mm) - Working height: 900 +/- 40 mm - Operator side: right - Max. part height: 70 mm - Number of top lamps: 2 pcs. - Lamps, vertically aligned: 2 pcs. - Suitable for mercury lamps - Suitable for gallium lamps - Lamp power, max.: 120 W/cm - Conveyor type: rod transport - Length: 2,500 mm - Width: 2,300 mm - Height: 1,500 mm Bdjdpexn Nlvofx Adred - Voltage, Hz: 400 V / 50 Hz - Total electrical connection: 86 A / 36.4 kW - Voltage fluctuations max.: +/- 5% Images are for reference only and show a similar machine.*

Condition: used, - Manufacturer: Venjakob Bjdpfxjy Ragfo Adrodd - Model: VEN DRY DTK 040 - Used machine - Working width: 1,300 mm - Working height: 880 ± 20 mm - Max. part height ~ 80 mm (more available as an option) - Length of nozzle drying channel 6,000 mm - Air velocity 25 m/s - Max. recirculating air flow rate 7,400 m³/h - Min. supply air 900 m³/h - Min. exhaust air flow rate 900 m³/h - Max. drying temperature ~ 50 degrees - Heating capacity 57.2 kW - Air velocity max. 23 m/s - With heat exchanger, heating water PWW 90/70°C - Belt conveyor 6,500 mm - Feed speed continuously adjustable approx. 3.0 - 7.0 m/min - Location: Blomberg warehouse - Voltage, Hz: 400 / 50 - Electrical connection: 10 kW (4.6 + 1.5 kW) - Voltage fluctuations: max. +/- 5% - Without control valves and water pumps

Condition: used, Year of construction: 2018, machine/vehicle number: 318113001, The machine has been partially overhauled and tested. - Manufacturer: Cefla Bedpfxex Tpx Aj Adrodd - Model: UV-R3 - Year of manufacture: 2018 - Working width: 1300 mm - Workpiece height: ~ 3 - 70 mm - Number of top lamps: 3 pcs. - With rod conveyor - Rod spacing: 60 mm - Suitable for mercury lamps - Suitable for gallium lamps - Lamp power: max. 120 W/cm - Connected load: 56 kW / 104A - Voltage, Hz: 400 / 50 - Control cabinet integrated under the machine - Feed speed adjustable: ~ 1.25 - 21.25 m/min - Length: ~ 3,500 mm - Width: ~ 2,700 mm - Height: ~ 1,600 mm - Exhaust air volume: 3,600 m³/h - Location: in stock - Voltage, Hz: 400 / 50

Condition: used, Year of construction: 2013, machine/vehicle number: A1312006-0030, - Manufacturer Venjakob - Type VEN DRY OIR 38/40 - Year of construction 2013 - Working width 1,300 mm - Working height 940 + - 20 mm - Length of exhaust duct 3,800 mm - Supply air capacity 100 m³/h - Exhaust air capacity ~ 500- 1000 m³/h - Recirculated air capacity ~ 3,000 m³/h Bjdpfx Asxfkbaedrjdd - Max. Drying temperature ~ 30 degrees - Air velocity 0.5 - 2 m/s - IR emitters 12 pcs. - IR heater output 12 x 1.5 kW - Belt conveyor, length 4.000 mm - Location, at the warehouse - El. Power 20KW / 63A - Volt, Hz 400/50 - Voltage fluctuations max. +/- 5 % - Control cabinet with touch screen display

Condition: used, Year of construction: 2007, with light barriers in the inlet area, the dryer only switches on when parts are detected by the light barrier, otherwise the dryer is in energy-savingstandby mode with almost closed mirror halves. Operation via a Siemens panel. - Manufacturer: Venjakob - Type: VEN DRY UV 3D - Year of manufacture: 2007 - Operating side: right - Working width: 1.300mm - Max. Part height: approx. 100mm - Number of tubes: 2 pieces - Suitable for mercury and gallium tubes - 3D for edge drying - Tube power max. 120W/cm - Tube power infinitely adjustable 50-120Watt/cm - With standby mode- With belt conveyor - Feed rate: ~ 2.5 - 7.5m/min. - Length: 3,000mm - Bretie: 2.750mm - Total connection ~45KW - Location: in stock Bedpeu S N R Eofx Adrsdd - Volt/HZ: 400/50

Condition: new, Year of construction: 2025, Firebox output: 175 kW Operating output: 140 kW Bodpfx Adoi Hplrsredd Flue diameter: 200 mm Warm air duct: 1 x 500 mm Firebox length: 950 mm Firebox width: 600 mm Firebox height: 860 mm Air flow rate: 8900 m³/h Power consumption: 3500 W Designed for room volume: 3000 m³ Area to be heated: 500/600 m² Oven height without warm air ducts: 2200 mm Oven width: 930 mm Oven length without flue gas fan: 1700 mm Weight: 615 kg

Condition: new, Year of construction: 2025, Combustion chamber output: 350 kW Working output: 279 kW Flue gas outlet diameter: 200 mm Hot air distribution ducts: 1 x 600 mm Combustion chamber length: 1200 mm Combustion chamber width: 740 mm Combustion chamber height: 1040 mm Air delivery: 17,800 m³/h Hot air fan power consumption: 3 kW Flue gas fan power consumption: 600 W Designed for room volume: 5,000 m³ Bdjdpfx Adjyffylorsd Area to be heated: 1,000 m² Oven height without hot air ducts: 2,500 mm Oven width: 1,100 mm Oven length without flue gas fan: 1,900 mm Weight: 850 kg

Condition: good (used), Year of construction: 1970, table load: 45,000 kg, table width: 2,100 mm, total length: 3,000 mm, Rotary table MITSUBISHI - DIT-A Mitsubishi Rotary table 3000 x 2100 x 45 T V-Axis 1500 mm MACH-ID 6015 Make: MITSUBISHI Type: DIT-A Bdodpowvkczsfx Adrjd Year: 1970 Table Length: 3000mm Table Width: 2100mm Table load: 45000 Movement V-axis: 1500mm Rotation B-Axis: 360.000° Rotation speed B-Axis:0,02 - 0,60Omw/min. Length: 0mm Width: 0mm Height: 0mm Weight: 0kg

Year of construction: 1986, condition: good (used), Swiveling welding rotator, rotary tilting table, container rotator, welding rotator, welding rotator, welding fixture, welding rotator, welding rotator and tilting table, welding rotator, rotary tilting tables positioning device -Table: can be tilted 360° -Clamping diameter: 850 mm Bdjdpohrfk Hsfx Adrod -Drive: 3.5 kW -Axles: 2 pieces -Dimensions: 4000/1480/H1350 mm -Empty weight: 2880 kg

Year of construction: 2021, condition: excellent (used), Swiveling welding rotator, rotary tilting table, container rotator, welding rotator, welding rotator, welding fixture, welding rotator, welding rotator and tilting table, welding rotator, welding rotator tilting table -Manufacturer: HEINRICHSGLÜCK, swiveling welding rotator -Type: DK1.000-P800 -Load capacity: 1000 kg -Control: via foot pedal -Three-jaw chuck: Ø 380 mm, three-jaw chuck bore Ø 150 mm -Base plate: Ø 800 mm -Speed: 0-1.5 rpm Right/Left rotation -Axles: 2 pieces -tiltable: electric -Height adjustment: No Bedpey Ul D Defx Adrjdd -Transport dimensions: 1430/1040/H1175 mm -Weight: 913 kg

Condition: used, Swiveling welding rotator, rotary tilting table, container rotator, welding rotator, welding rotator, welding fixture, welding rotator, welding rotator and tilting table, welding rotator, welding rotator tilting table -Handover: in its current condition as inspected -Condition: without drive motors / control unit, see photos -Welding swivel device: swiveling -Turntable: Ø 700 mm Bdodpfx Adevmrf Tsred -Projection: 930 mm -Axles: 2 pieces -tiltable: via gearbox -Height adjustment: No -Transport dimensions: 1240/730/H1640 mm -Weight: 643 kg

Condition: good (used), Container rotating device, welding rotating device, welding rotating device, welding device, welding rotary table, welding rotary and tilting table, welding rotating device, welding rotary tilting table -Welding turning device: turning length 3130 mm -Turntable: Ø 800 mm -Peak height: 870 mm -Speed: electrically continuously variable 0-3 rpm -Drive: Servo motor 1/1.6 kW with cooling, see photo of nameplate -Direction of rotation: Right/left rotation -Axles: 1 piece -tiltable: No -Height adjustment: No -Transport dimensions: 3890/900/H1420 mm Bdjdpexm Sqrsfx Adrjd -Weight: 880 kg

Year of construction: 1980, condition: good (used), Swiveling welding rotator, rotary tilting table, container rotator, welding rotator, welding rotator, welding fixture, welding rotator, welding rotator and tilting table, welding rotator, welding rotator tilting table -Manufacturer: Gieseking, Motorized welding rotary and tilting table -Type: SD 1 -Load capacity: 1,000 kg -Rotational movement: electrically continuously adjustable 0-1 rpm -Faceplate: Ø 1010 mm -Three-jaw chuck: Ø 290 mm, bore Ø 74 mm -Axles: 2 pieces -tiltable: electric -Height adjustment: No -Transport dimensions: 1750/1170/H1620 mm Bodpsyaniljfx Adrjdd -Weight: 1392 kg

Condition: good (used), Welding rotary device, rotary tilting table, container rotary device, welding rotary device, welding rotary device, welding device, welding rotary table, welding rotary and tilting table, welding rotary device Bsdpsf Nb Dwjfx Adrodd -Three-jaw chuck: Ø 200 mm -Speed: 1/8 to 2 1/4 rpm -Direction of rotation: Right/left rotation -Peak height: 535 mm -Axles: 1 piece -tiltable: No -Height adjustment: No -Dimensions: 925/1100/H700 mm -Weight 188 kg