Used Rolling Mill for sale (16,354)

Year of construction: 1991, condition: good (used), Make: HAEUSLER Type: VRM-HY Year: 1991 Specifications Metric US Standard Rolling width 3000 mm Rolling thickness 3x toproll Ø Nwjdskwcc Nopfx Ahvsd 120 mm Rolling thickness 5x toproll Ø 150 mm Rolling thickness prebending 100 mm Top Roll Ø 910 + 820 + 740 mm Bottom Roll Ø 940 mm Side roll Ø 780 mm Number of rolls 4 Rolling speed 2 + 4 Adjustiment lower roll 200 mm/min. Adjustment side rolls 500 mm/min. Number of driven rolls 2 Power 300 kW Dimensions (Estimate) Length 8000 mm Width 5400 mm Height 5400 mm Weight 290000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Share on

Year of construction: 1980, condition: good (used), Make: HAEUSLER Type: VRM-HY Year: 1980 Specifications Metric US Standard Rolling width 3000 mm Rolling thickness 3x toproll Ø 130 mm Rolling thickness 5x toproll Ø 140 mm Rolling thickness prebending 120 mm Top Roll Ø 950 mm Bottom Roll Ø 850 mm Side roll Ø Njdpjkvm Szefx Ahvjwd 180 mm Number of rolls 4 Rolling speed 2 + 4 Adjustiment lower roll 0 - 400 mm/min. Adjustment side rolls 0 - 400 mm/min. Number of driven rolls 2 Power 132 + 37 kW Dimensions (Estimate) Length 12000 mm Width 5440 mm Height 5650 mm Weight 286000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Year of construction: 1978, condition: good (used), Make: HAEUSLER Type: VRM-HY Year: 1978 Specifications Metric US Standard Rolling width 3050 mm Rolling thickness 3x toproll Ø 60 mm Rolling thickness 5x toproll Ø 70 mm Rolling thickness prebending 50 mm Top Roll Ø 630 mm Bottom Roll Ø 600 mm Side roll Ø 500 mm Number of rolls 4 Rolling speed 0 - 5 Adjustiment lower roll 200 mm/min. Adjustment side rolls 200 mm/min. Number of driven rolls 2 Power Njdpjkvm S Nefx Ahvewd 120 kW Dimensions (Estimate) Length 5790 mm Width 4200 mm Height 4200 mm Weight 85000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Make: WMZ / PITTLER, Model: PVSL N1 2/2, Year of manufacture: 2009, Machine no.: ZN022, Control: Siemens Sinumerik 840D sl Powerline including handwheel, 2 spindles, 2 workspaces, 2 cross slides, max. turning diameter: 140 mm, max. workpiece height: 80 mm, max. spindle speed: 6,300 rpm, 2x 8-position turrets, driven tool stations, chip conveyor by Knoll, extraction unit by ILT, recooling unit by Hydac, workpiece automation with raw part and finished part storage Nwsdpfsx Ahfwex Ahvod +++ Note: Machine is part of an online open sale! +++

Condition: used, Year of construction: 2011, Ma.-No. 327233239, control unit Mazatrol Matrix 2, travel paths X/Z 450 x 150 mm, main spindle, sub-spindle, 2x 8-position tool turrets with driven tool stations, tool holder VDI 40, 2 spindle units, max. spindle speed 5,000 rpm, max. machining length 530 mm, max. spindle bore 51 mm, tool measuring system, operating hours approx. 34,987, gantry loader, make Mazak, type Flex-GL100F, conveyor belt, L 6,000 mm, workpiece table, belt filter unit, make Knoll, type KF 400, chip conveyor, make CROMAR, tool and accessory package Nsdpoyffvtofx Ahvowd +++ Note: This machine is part of an online auction! +++

Condition: used, Year of construction: 2024, Milling machines Travel distance X: 400 mm Travel distance Y :350 mm Travel distance Z: 380 mm Number of axis: 3 milling machine / machining center Control: Haas CNC Steuerung spindle chuck: SK 40 spindle revolutions: 10000 rpm Speed range to: 10000 U/min table size X: 914 mm table size Y: 305 mm max. workpiece weight: 227 kg tool changer: 10 - time input Power : 5,6 kW Torque: 45 Nm Rapid traverse: 15000 m/min feed rate: 12700 mm/min Compact 3-axis CNC vertical machining center Nwsdsyxcdcepfx Ahvod Ideal for small to medium-sized workpieces High spindle speed for precise machining Tool changer for efficient production

Condition: used, overall weight: 2,700 kg, MAZAK QUICK TURN 8 Serial number: 69867 Year of manufacture: 2010 Tool changer: 6 stations Control system: MAZATROL CAM T-2 Weight: approx. 2700 kg Chip conveyor: TSL BAKIMOTO D60W150ST-DN The scope of delivery includes: Workshop cabinet with machine accessories Indexable inserts Turning tools Tool holders Clamping jaws Selection of screws Nsdpsyxb Hijfx Ahvewd

Condition: excellent (used), Year of construction: 2017, MAZAK QUICK TURN 250MY Nedpfx Aoyki Taohvewd Max. turning diameter: 380 mm Max. milling speed: 5,000 rpm Max. spindle speed: 4,000 rpm Max. bar capacity: 80 mm Machine is equipped with: - Mazatrol SmoothG CNC control - KITAGAWA three-jaw chuck BB-210, diameter 254 mm - Tool Eye - C-axis - Y-axis - automatic parts catcher - interface for bar feeder - signal light (3-color LED) - reinforced coolant pump - chip conveyor - standard MAZAK tool package

Condition: like new (used), Year of construction: 2004, Retrofitted: 2025 Numerical control: HEIDENHAIN TNC-530 Technical features Dimensions Table dimensions: 4500 x 2000 mmNumber of T slots: 11T slots dimensions: 22 mm Traverses of axis X axis traverse: 4000 mmY axis traverse: 3000 mmZ axis traverse: 1000 mmVertical capacity (VC): 500 / 1500 mm  (in direct exit)Distance between columns: 2500 mm Milling head Universal manual UM40Tool clamping system: HydraulicTaper nose: ISO50Speed range: 20 - 3.000 r.p.m. (5.000 r.p.m. direct exit)Spindle power: 30 kW Feedrates Feedrate: 7000 mm/minRapid feedrate (X / Y,Z): 15000 / 12000 mm/min Weight and dimensions Maximum weight on table: 10000 KgMachine weight approximate: 45300 KgMachine dimensions approximate: 10926 x 4768 x 5110 mm Accesories Guarding: 2 sliding doors and new perimetral wire-mesh security ernal coolant. Electronic handwheel: New HR-510 Sales conditions Guarantee: 6 months mechanical partsConditions and sale price: On request View all technical features Nsdpfx Ajyf Rqvshvewd

Condition: like new (used), Year of construction: 2004, Retrofitted: 2025 Numerical control: HEIDENHAIN TNC-320 Technical features Dimensions Table dimensions: 4500 x 1100 mmNumber of T slots: 8T slots dimensions: 22 mm   Traverses of axis Longitudinal traverse X: 4000 mmCross traverse Y: 1200Vertical traverse Z: 1000 Milling head Head type: NEW Universal Auto-indexing (UDG / every 2.5º)Tool clamping system: HydraulicTaper nose: ISO 50 (DIN 69871)  /  Pull stud: DIN 69872Speed range: 20 - 3000 r.p.m.Spindle power: 29,8 kW Feedrates Feedrate: 5000 mm/minRapid feedrate (X / Y,Z): 15000   /   10000 mm/min Weight and dimensions Maximum weight on table: 8000 kgMachine weight approx.: 23500 kgMachine dimensions approx.: 11100 x 5392 x 3400 mm Accesories Guarding: 2 front doors and a new perimetral wire-mesh ctronic handwheel: New HR-510Coolant: External Sales conditions Warranty: 6 months mechanical partsPrice and sale conditions: On request View all technical features Nodpfxjyw Uqxs Ahvjwd

Condition: like new (used), Year of construction: 1998, Retrofitted: 2026 Numerical control: SIEMENS 840D Nwjdpoyf Rq Aefx Ahvsd Technical features Dimensions Table dimensions: 5000 x 2000 mmNumber of T slots: 13T slots dimensions: 22 mm Traverses of axis X axis traverse: 5000 mmY axis traverse: 3250 mmZ axis traverse: 1000 mmDistance between columns: 2500 mm Milling head Head type: C5E- 2 axis continuous headTool clamping system: HydraulicTaper nose: BT 50Speed range: 40 - 4000 rpmSpindle power: 37 kW / 372 Nm Feedrates Feedrate: 2 - 5000 mm/minX-Y,Z Rapid feedrate: 7200 / 12000 mm/min Weight and dimensions Max Weight on table: 25000 kgMachine weight: 40500 kgMachine dimensions: 12700 x 5070  x 4900 mm Accesories Guarding: 2 doors + perimeter wire-mesh fenceAutomatic tool changer: ATC-60Electronic handwheel: New SIEMENS 6FX2007-1AC04Coolant: External Sales conditions Warranty: 6 months mechanical partsConditions and price sale: On request   View all technical features

Condition: used, Year of construction: 2019, x-travel 660 mm y-travel 406 mm z-travel 508 mm Control MAX5 distance spindle /table 102 - 610 mm table surface area 762 x 406 mm T-slots (number x width x distance) 3 x 18 H8 x 100 mm table load 682 kg Nwsdpfx Aeyw Tncjhvsd spindle tunring speed 12.000 U/min spindle drive 11 kW torque 61 Nm tool taper SK 40 number of tool places 20 Pos. tool diameter 89 mm Tool diameter with free secondary positions 127 mm tool length - max. 250 mm weight of tools 7 kg spindle hours ca. 1.664 h In our assessment, the machine is in good used condition and can be inspected under power by appointment. Technical features & accessories: - Electronic handwheel - Synchronous thread cutting - Internal coolant supply 20 bar Accessories, tools, and clamping devices shown are only included in the scope of delivery if specifically stated in the additional information. Technical data and specifications are subject to change without notice. Prior sale is reserved.

Condition: used, Year of construction: 2016, x-travel 1.020 mm y-travel 700 mm z-travel 500 mm Control Siemens 828D table dimensions 1.050 x 700 mm Nwodpjyw Tm Eofx Ahved spindle tunring speed 15.000 U/min tool taper BBT-40 In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: used, Year of construction: 2008, x-travel 600 mm Nwodpfjyw Tmxjx Ahvjd y-travel 450 mm z-travel 30 mm Control Roeders RFM 600 DS table-size 700 x 550 mm spindle tunring speed 42.000 U/min tool taper HSK 40 number of tool places 20 Pos. In our assessment, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Technical data and specifications are subject to change without notice and errors. Prior sale is reserved.

Condition: good (used), Double-end tenoner, edge processing machine, scoring motor, chipper motor, spindle motor, milling motor Nwedpfsb A Nx Dsx Ahvjd -Power: 0.23 kW -Speed: 18000 rpm at 300 Hz -Dimensions: 210/70/H100 mm -Weight: 2 kg

Condition: used, Used Christy Turner hammer mill model LB7. Infeed is 252mm dia by 295mm length. Unit driven by 15kW, 1460rpm motor. Rotor housing is 205mm diameter by 400mm long. Unit has mild steel blunt swinging hammers approximately 10mm thick. Includes discharge hopper. All mounted on a mild steel stand. Weight: Estimated: Lbs250.0 Nwsdpeyw Tcgefx Ahvod Dimensions: 700mm X 1450mm

Condition: used, Used Oliver & Batlle model HM-15 stainless steel bead mill. Has stainless steel jacketed chamber which measures approximately 450mm long x 250mm diameter. Nwsdpfoyw Tbvsx Ahvod Approximate total capacity 15 litre (product dependent). This equipment has a stainless steel rotor belt driven by 18.5kw, 415volt, 3/50, 1460rpm motor. Click on the link below to see a video of the machine running.

Condition: as good as new (ex-display), 1 unused universal milling head for retrofitting to conventional, NC or CNC milling machines or boring mills of any kind, "HURON" system, swivels over 2 axes, every angle adjustable. Spindle taper: ISO 40 Reach approx. 360 mm Designed drive power: 10 HP Max. speed: 1,800 rpm Nwsdpfedbny Eex Ahvjd Weight: approx. 82 kg Accessories / Special features: • Manual tool clamping • Main spindle and all shafts and gears made of case-hardened and tempered chrome-nickel steel • 2 rotatable axes making every setting angle possible! "HURON" system • Tapered drives ground according to "KLINGELNBERG" system • Main spindle bearings made of high-precision tapered roller bearings • 1 tool drawbar • Operating manual Delivery time: immediate, subject to prior sale Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), Year of construction: 1994, SAC F4 – year 1994 – very well-preserved, maintained condition, still in production. In 2005, the machine was upgraded to a more modern control system. SAC F4 TL – year 2002 – machine with full equipment, currently in storage (only the nameplate and a picture from the internet available). Included are tools for the production of Euro-style windows and doors, thickness 78 and 92 mm, brand Vydona – drawings attached. Price for this set (2 machines + tools): €9,000 Nwodpfx Ahsyw R Iajvjd

Condition: excellent (used), Year of construction: 2021, Traverses X Y Z: 508 x 406 x 356mm, Table 1016 x 353mm, Spindle taper BT40, 20Hp spindle motor, Nwsdjyw R Hpopfx Ahvod Spindle Speed 10000rpm, HAAS Control, 20 Station ATC, coolant.

Condition: used, Year of construction: 1978, functionality: fully functional, wheel diameter: 500 mm, Bevel Gear Milling Machine ZFTKK 500 (spiral bevel) For sale: bevel gear milling machine ZFTKK 500 designed for machining spiral bevel gears. The machine is ideal for gear production applications, offering high precision and consistent repeatability. Technical specifications: Max. gear diameter: 500 mm Max. module: 10 mm Nwodpfx Aoyw Rpkehved Max. face width: 71 mm Number of teeth: 6 – 100 Max. ratio: 1:6 Radial adjustment: 30 – 220 mm Bevel angle adjustment: 0 – 90° Cutting speed: 40 – 80 m/min Machine in very good technical condition, ready for operation.

Condition: used, functionality: fully functional, travel distance X-axis: 6,300 mm, travel distance Y-axis: 1,100 mm, travel distance Z-axis: 1,500 mm, spindle speed (max.): 1,800 rpm, spindle speed (min.): 10 rpm, table width: 1,000 mm, table length: 8,000 mm, CNC Bed Milling Machine Zayer MF3 8000 CNC For sale: bed milling machine from the well-known manufacturer Zayer, model MF3 8000 CNC. The machine is designed for machining large and long workpieces, ensuring high precision and rigidity. Technical specifications: Travels X/Y/Z: 6300 x 1100 x 1500 mm Table size: 8000 x 1000 mm Spindle speed: 10 – 1800 rpm Nwodpfxeyw N Ras Ahved Spindle power: 18.5 kW Spindle taper: ISO 50 CNC control: Heidenhain TNC 320 Universal milling head: 360° swivelling Machine in very good technical condition, ready for operation.

Condition: good (used), Year of construction: 2007, control 840 D Nwedewzyp Uepfx Ahvod x-axis 2500 mm y-axis 2500 mm z-axis 1700 mm Control system - Siemens Sinumerik 840 D Max. workpiece weight - 6000 kg Spindle diameter - 130 mm Quill stroke - 700 mm Tool holder - ISO 50 DIN 69871 - AD Max. torque at the spindle - 1847 Nm Total power requirement - 65 kW Machine weight approx. 45 t Space requirement approx. 10.9 x 9.3 x 5.7 m

Condition: good (used), Year of construction: 2002, workpiece dia. 40 mm max. module 2 min. module 0,1 workpiece length - max. 665 mm weight 4,5 t spindle bore diameter 82,5 mm Control Siemens total power requirement 5,5 kW Technical data max. module 2 Pitch 0.5 - 25 mm Number of speeds multi-speed / multiple max. workpiece diameter40 mm max. workpiece length180 mm Milling cutter diameter max.80 mm max. milling cutter width12 mm Z-axis (milling length with counter point)90 mm Z-axis (milling length without counter point)113 mm Milling head swivelling angle30° / 30° Nwodpfx Ajv Ucdvjhvjd Description Gear hobbing and thread cutting machine. LAMBERT - 124 CNC The machine is in a well-maintained condition.

Condition: used, Year of construction: 2003, max. Spindle speed 5000 U/min. travel -x axis 160 mm travel -z axis 450 mm numbers of turret head positions 12 tool taper VDI 30 Control Heidenhain iT Plus Dimensions (L x W x H) 4,5 x 2,5 x 2,5 m weight of the machine 3700 kg CNC Turning- and Milling Center | DMG GILDEMEISTER - CTX 310 Additional equipment: - C-Axis Nwedpfev Ehawex Ahved The machine is in good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: CTX310 | CTX-310