Used Three-Roll Mill for sale (21,569)

Year of construction: 1997, condition: used, Manufacturer: G.B.P Snc ItaliaType: three-roll millMaterials: stainless steelModel: R80Year: 1997Power: 0.37 kW3 cylinders, Ø 80 x 250 mm Nwedey D Ug Hopfx Aa Dog

Condition: used, Type: Three-roll mill Roll width: 150 mm Nwedpfxey Abb Is Aa Dog Roll diameter: 75 mm Number of rolls: 3 Safety sensor Control panel    

Condition: ready for operation (used), Year of construction: 2012, Available for immediate pickup at our location: Three-roll round bending machine AK – Bend Type ASM 140 – 20/4 Year of manufacture 2012, only a few operating hours Bending length 2050 mm Sheet thickness 4.5 mm Minimum bending radius 4 mm Roller diameter 140 mm Smallest diameter 210 mm Weight 1530 kg Center rollers driven by electric motor Top roller can be swung out to the side Main motor with braking device Nwsdpfjy U Ekkjx Aa Dog Taper bending attachment Mobile control panel with foot pedal Motorized rear roller adjustment Digital display for rear roller Induction-hardened rollers Price: Euro 7,250.00 plus VAT, ex warehouse.

Condition: good (used), sheet width: 1070 mm plate thickness: 1,6 mm roll dia. top roll: Ø 70 mm roll dia. bottom roll: Ø 70mm weight of the machine ca.:t dimensions LxWxH: 1,9 x 0,6 x 1,12 m Njdpfx Ajg Rypmsa Djwg - upper roll can be swing out - operation via hand wheel

Condition: good (used), functionality: fully functional, Roll Mill 30 HP for Silver, Copper Nwsdpfxsy Sz Tvs Aa Djg

Year of construction: 1971, condition: excellent (used), functionality: fully functional, Roll mill CARL WEZEL BW350 61 HP Nwjdpfx Aasy Sz S Ee Deg Under power

Condition: ready for operation (used), A granite three-roll mill, presumably made by Rhenania, which was used for marzipan, is available. On-site inspection is possible. Nedpsy Rthcefx Aa Dewg

Year of construction: 2009, condition: used, Drive with 3 milling motors ensures a very stable structure (steel profiles can be machined from 3 sides in a single clamping). Locking mechanism for the lift of the horizontal motors prevents profiles from being scratched when inserting and removing them. Processing of profile widths up to 300 mm possible (e.g., mailboxes) using only the vertical milling motor. Specification: - Equipped with 1 vertical and 2 horizontal milling motors - Pneumatic workpiece clamping with 2 horizontal clamping cylinders - 3 pneumatic spray nozzles - Milling area of the vertical motor (L x D): 365 x 230 mm Nedpfx Aasy Nm Erj Dewg - Milling area of the horizontal motors (L x H): 250 x 100 mm - Maximum profile height: 150 mm - Operation via switches and 4 hand levers

Condition: good (used), Burgess Three roll sheeter Nwodpfx Ajy Ayckja Djg Stainless, three roll sheeter, with top mounted hopper, 450mm rollers, two fluted rollers and one smooth, on mobile frame, 3Ph

Condition: like new (used), Dalian XK-550 roller mill complete (control, hydraulics, motor). Good condition, factory-assembled, ready for immediate use. Type: Dalian XK-550 Roller width: 550 mm Design: closed, industrial roller mill Working length: 1500 mm Roller speed: 18–30 m/min Speed ​​ratio: 1:1.27 Gap adjustment: hydraulic Max. gap: ~0.5–12 mm Nwsdpfx Aey Eyy Uoa Dog Capacity: 2–6 t/h Power: 110kW Material: hardened cast iron rollers

Condition: good (used), functionality: fully functional, Year of construction: 1975, Three-roll plate bending machine by Kramer, model RH III 80 x 1000. Working length: 1000 mm. Roll diameter: 80 mm. Nodpfx Aasww I Tms Dewg

Condition: used, working width: 1020 mm Nedpeda I Itefx Aa Djwg metal sheet thickness: 1 mm upper roller-Ø: 55 mm below roller-Ø: 55 mm space needed: 1370 x 570 x 1100 mm

Condition: good (used), functionality: fully functional, Year of construction: 1978, machine/vehicle number: 4303, working width: 3000 mm metal sheet thickness: 15 mm metal sheet thickness when bending: 10 mm Nwsdpjd D Nxxofx Aa Deg upper roller-Ø: 320 mm below roller-Ø: 310 mm working speed: ca. 5,5 m/min electrical connection: 380 V kW weight: ca. 17000 kg space needed: 5450 x 2100 x 2450 mm

Condition: used, Year of construction: 2000, functionality: fully functional, 1x Used Bühler MDDL / MDDK Rollers are worn and can be re-grooved at an additional cost. Complete mill is already dismantled. Includes 4 drive motors. Nwjdpfxsyudt Ns Aa Deg Spare parts can be supplied at extra cost.

Year of construction: 1975, condition: excellent (used), daylight width: 70 mm speed: approx. 15 m/min working direction: any Njdpfep E Efvsx Aa Djwg work roll diameter: 80 mm

Year of construction: 2000, condition: excellent (used), daylight width: 170 mm speed: approx. 25 m/min working direction: any work roll diameter: 120 mm Nwsdjp E Eglspfx Aa Dsg barrel length: 150 mm backup rolls: backup block/chain

Condition: excellent (used), strip width: 6 - 200 mm strip thickness: 6 – 0,5 mm speed: max. 100 m/min working direction: any work roll diameter: 250 mm barrel length: 250 mm roll core for rolling rings: 190 mm Njdpfxsp E Ed Rs Aa Dewg

Year of construction: 1998, condition: ready for operation (used), A hydraulic 3-roll plate rolling machine Omcca is available. Working length: 2050mm, max. plate thickness rolling/pre-bending: 8mm/6mm, roll diameter: 200mm. Machine dimensions X/Y/Z: approx. 3200mm/900mm/1500mm, weight: approx. 3300kg. On-site inspection is possible. Nwsdpoycwrzjfx Aa Dog

Condition: ready for operation (used), A two-roll plate rolling machine Fasti is available. Roll diameter: 130mm, working width: 2150mm, max. sheet thickness: 3.5mm. Machine dimensions X/Y/Z: approx. 2900mm/650mm/1100mm, weight: approx. 1200kg. Documentation available. An on-site inspection is possible. Nwjdpfsx U Dwvex Aa Deg

Condition: new, functionality: fully functional, Year of construction: 2026, RCMI 280 Three-roll profile bending machine Technical characteristics: Section modulus 720 cm³ Main shaft diameter 280 mm Side shaft diameter 280 mm Outside diameter of the bending rolls 720 mm Adjustable rolling speed 0-4 m/min Installed power 44 kW (60 hp) Weight 34,000 kg Standard equipment: Hydraulic adjustment of the side rolls 3 rolls powered (3 hydraulic motors + 3 planetary reduction gears) Independent lateral profile guide rollers, adjustable in 6 directions, fully hydraulic Automatic scope rotation speed compensation Complete universal rolls set for standard profiles and beams (12 pieces) Tool kit for machine equipment Nsdpsiivhdsfx Aa Dswg Low-voltage control on mobile operator panel Safety device according to regulations Technical documentation and CE certificates Digital displays for the rolls position of the side rolls

Condition: new, functionality: fully functional, Year of construction: 2026, HAV 3293 Plate width: 3200mm Top Roll diameter: 930mm Side rolls diameter: mm 800 Machine weight: 150 Ton Rolling capacities (Y:260Mpa/Ø 4650mm): 3200mmx155mm Njdjiivg Sjpfx Aa Dewg Prebending capacities (Y:260Mpa/Ø 4650mm): 3200mmx115mm

Condition: new, functionality: fully functional, Year of construction: 2026, FACCIN HAV 3162 variable three-rolls bending machine Electronically controlled, hydraulic three-rolls bending machine Technical specifications: Number of Rolls: Three Geometry of the side rolls: variable Working length: 3050 mm Top roll diameter: 620 mm Side rolls diameter: 550 mm Pressure force against the top roll: 630 tons Working pressure at nominal force: 250 bar Guaranteed installed power: 55 kW (75 hp) Guaranteed maximum rotation speed: 3.5-7 m/min Guaranteed machine weight: 45,000 kg Length: 7,600mm Width: 3,700mm Height: 3,100mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 75 mm Bending performance (full working width) 48 mm Nodpfxsiivgyj Aa Dowg from a pipe diameter of 3,100 mm Rolling capacity (full working width) 55 mm Bending performance (full working width) 40 mm from pipe diameter 805 mm Standard equipment: variable geometry with linear guides for rolls movement Extra long release arm for increased frame stability Electronic parallelism system EPS Hardened rolls for high wear protection All rolls ground after heat treatment Siemens S7-HMI PLC control PGS-CLASSIC control with Siemens touch panel Hitech hydraulic and electric package Simultaneous rotation and rolls movement Safety trip wire with emergency stop and CE certification central lubrication Water cooling for the hydraulics cone bending device Prepared for retrofitting supports and roller conveyors FACCIN Advantage Package AP

Condition: new, functionality: fully functional, Year of construction: 2026, Specifications R-62 Standard rolls diameter: 460 mm Diameter of the central / side shafts: 180 /160 mm Motor power: 15 kW Rotation speed: 0-7m/min Net weight: 8,000 kg Standard version R-62S: Vertical working position Hydraulically variable speed of rotation on all three rolls with hydraulic motor. one motor for the top roll, one motor for the side rolls Nodpfjiinllex Aa Dewg Automatic speed compensation between top and side rolls Hydraulic adjustment of the side rolls Digital displays for the position of the side rolls Fully hydraulically adjustable guide rolls SKF ball or roller bearings in all journals Hardened gears running in oil Hanging control unit with mini joysticks for all control functions with digital displays Emergency push button Complete set of adjustment tools Operating and maintenance manual

Condition: new, functionality: fully functional, Year of construction: 2026, Three rolls variable axis bending roll Make FACCIN, model HAV/S 3145 Nwedoc S N Nqjpfx Aa Djg Technical specifications: Number of Reels: Three Geometry of the side rollers: variable Working width: 3000 mm Top roller diameter: 450 mm variable three-roller bending machine

Condition: new, functionality: fully functional, Year of construction: 2026, Hydraulically controlled three-roller bending machine Make BIKO, model B3 2021 Technical specifications: Number of Reels: Three Geometry of the side rollers: linear guides Working width: 2000 mm Top roller diameter: 215 mm Side roller diameter: 195 mm Guaranteed installed power: 7.2 kW Guaranteed maximum rotation speed: 5 m/min Guaranteed machine weight: 3,000 kg Length: 3,700 mm Width: 1,000mm Height: 1,100 mm Guaranteed capacities: for material with a yield point of 260 N/mm² Rolling capacity (full working width) 13 mm Bending capacity (full working width) 9 mm from pipe diameter 1075 mm Rolling capacity (full working width) 9 mm Bending performance (full working width) 7 mm from pipe diameter 280 mm Standard equipment: Double linear guide system for the roller movement Extremely wide bearing blocks MCS double bearing system for the roller rotation Extra heavy double hinged release Hardened rolls for high wear protection Hydraulic parallelism system of the side rolls Digital display for the position of the side rolls cone bending device Safety trip wire with emergency stop and CE certification Njdpfx Aajcuxp Tj Dewg Mobile control panel