Used Cold Pilger Rolling Mill for sale (7,219)

Condition: used, Year of construction: 2016, Technical details: Ibedoudf Evopfx Afijc weight: 22 t

Year of construction: 1975, condition: excellent (used), daylight width: 70 mm speed: approx. 15 m/min Isdsp E Efvepfx Afijbc working direction: any work roll diameter: 80 mm

Condition: used, Thread rolling machine, cold rolling machine, thread rolling machine, profile rolling machine Manufacturer PEE-WEE Type P 24 Q serial no. LC2403099 year of construction 2004 Rolling force max. 24 ton. Tool diameter max. 200 mm Rolling spindle diameter 69,85 mm Tool bore diameter 70 mm (nominal diameter) Tool length, tool length max. 180 mm Workpiece diameter max. 50 mm Rolling spindle speed 22 - 44 - 95 - 190 rpm Motor power hydraulics approx. 3 kW Motor power roller drive 5.5 kW Mains connection 400 Volt, 50 Hz - Swivel roller spindle for threaded continuous rollers - Rolling spindle speed in 4 stages via gear changeover - Hydraulic system integrated in the machine bed Space requirement L x W x H 2000 x 1750 x 2550 mm Weight approx. 3 tons good condition Ibodpfxsh A S Hto Afijc Grooving rollers: The thread rolling tools with the same pitch as the workpiece form the thread by penetrating into the workpiece up to the nominal diameter. The thread length is maximum as long as the rolling tools are wide. Continuous rolling: When the thread length is greater than the rolling tool width. Through-feed tools have 3 sections - the infeed, the calibration section and the outfeed. Grooved rollers have no pitch and are swiveled with the pitch angle of the profile to be rolled. Pitch rollers differ from grooved rollers in that they have a pitch in the profile. The sum of the pitch angle and the swivel angle gives the pitch angle in the workpiece.

Condition: used, Year of construction: 1987, rolling capacity max. NA t workpiece diameter 38 mm workpiece length 500 mm total power requirement 24 kW weight of the machine ca. 10 t dimensions of the machine ca. m Max.Ø tool slide stroke 760 mm Max.Ø rack length 610 mm Length of workpiece between centres, approx. 500 mm Max. tooth width / profile width 92 mm Max. workpiece Ø 38 mm Tailstock stroke on outboard support, hydraulic, approx. 500 mm Module range 0.3 - 1.3 Total electrical load, approx. 24 kW - 380 V - 50 Hz Ijdpfx Aet Hw D Dofiebc Weight, approx. 10,000 kg Accessories / Special Features * KBH Workpiece Feed Device, standing parallel to the machine, at present set-up for feed-in and feed-out of shaft-formed workpieces, approx. Ø 16 x 200 mm long, with prism conveyor belt and lifting station for 2 shafts (blank and finished part), as well as workpiece positioning control. * Originally, external gears were formed on the machine using pinion cages (no. of teeth = 25), Ø approx. 32 mm x 14 mm long, workpiece Ø approx. 80 x 80 mm long. * Various accessories: * Separate switch cabinet. * Separate hydraulic unit, 900 l. * Coolant device in the machine. * Control panel with malfunction message in plaintext, etc. Roto Flo machines are ideal for mass production of smaller gears/profiles. The coldforming process is a lot faster and more economical than other chip removing methods. Workpieces are clamped between 2 live centres and 2 synchronous opposed directional coldforming racks simultaneously engage the workpart and start rotation. During rotation, the profile is formed successively within one stroke. In the calibrating zone, the profiling and surfacing performance of the tool are optimised. Profiles do not require a run-out. The coldforming process requires a rigid and heavy duty construction of the machine, which ensures the required precision over the years. Between 25,000 and 100,000 working cycles can be performed with one set of racks, also for serrations. Condition : Very good. Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract. Thank you for your interest. We always have a good selection of gear machines available. Please let us know what you need.

Year of construction: 1998, condition: excellent (used), machine/vehicle number: ExCello Serial Number 3888, MICHIGAN Rotoflo Type 3237 Cold Forming Machine. Original Serial Number: 4590 ExCello Serial Number 3888 Ibsdpfxofnk Ehj Afijc New 1975 rebuilt by ExCello late 1990’s Country of Origin: USA For the coldforming of profiles for serrations (straight or angular), spiral teeth, oil grooves, threads and knurls. Capacity: Maximum slide stroke 1065 mm Maximum rack length 915 mm Maximum profile diameter 50 mm Maximum profile length 125 mm Standard module range 0.3 to 1.25 Motor size 15 kW Hydraulic tank capacity 1000 l Overall floorspace width of machine 5014 mm Width of machine 2768 mm Depth with outboard support 4165 mm Height 2000 mm Approximate weight of machine 11,700 kgs Complete with: Hydraulically operated outer support assembly to accommodate part length universal headstock, Universal rack holding feature.

Year of construction: 2004, condition: good (used), 4-Hi CRM Rolling Mill Froehling Head Froehling is a very renowned brand for its reliability and robustness in the field of Rolling Mills, this 4-stage rolling mill allows precise and fast milling. Below are the features: Manufacture: - FROEHLING (Germany) - New 1969 - Upgrades 1984 and 2004 Material: - Aluminum alloys - copper - brass - low carbon steel Strip Width: - 282 (300) mm / 11.1" (11.8") Strip Thickness: - 0.15 - 1.20 mm commonly processed - 2.00 mm max thickness Coil Size: - ID - 400 mm (15.75") - OD - 1500 mm (59") Mill Speed: - 400 m/min (1312 fpm) Work Rolls: - Diameter - 130 mm (5.12") - Face - 340 mm (13.4") Back/up Rolls: - Diameter - 390 mm (5.12") - Face - 335 mm (13.4") Drive: - 250 kW ABB DC motors / converters - New 2004 Controls: - ABB PLC - Vollmer Automatic Gauge Control Ibedpog Ryqkjfx Afisc - Hydraulic AGC System - Bending system Completed with: - Uncoiler - Recoiler - Belt wrapper - unloading car - Hydraulic power units - Electrical control cabinets (2002) Many sets of work rollers and backup rollers as spare We have all electrical and mechanical drawings, Software key and everything needed to reassemble and restore the function of this machine. It was dismantled after have worked until last day. If you have any questions, please let us know Sold EXW dismantled and loaded on truck. Ready for any inspection from any customer interested in. SEND US YOUR PROPOSAL IF YOU ARE INTERESTED ON THIS MACHINE, WE WILL DO OUR BEST TO HAVE A GOOD BUSINNES TOGETHER.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, machine/vehicle number: 109 956, workpiece diameter (max.): 38 mm, workpiece length (max.): 500 mm, TECHNICAL DETAILS Workpiece Rack Length: max. 610 mm Iodpswx H R Tsfx Afiebc Workpiece Diameter: 38 mm Module Range: 0.3 – 1.3 Max. Slide Stroke: 1130 mm Max. Rolling Bar Length: 915 mm Max. Profile Outer Diameter (Standard): 50 mm Max. Profile Width (Standard): 125 mm Gear Cutting (Rollability): 0.3–1.25 Machine Cycle Times Tailstock forward (approx. 300 mm stroke): 1.0 s Rolling bars forward: 4.2 s Tailstock return (approx. 300 mm stroke): 1.5 s Rolling bars return: 4.8 s Loading/Unloading (manual): 5 s MACHINE DETAILS Weight & Dimensions Total Weight (without automation): 12,200 kg Overall Width: 5,014 mm Machine Width: 3,104 mm Depth without cantilever: 2,564 mm Depth with cantilever: 4,166 mm Hydraulic System Hydraulic Tank: 1,000 l Hydraulic Operating Pressure: 80 bar Electrical Equipment Operating Voltage: 400 V / 3 phases Frequency: 50 ±1 Hz Coolant System Tank Capacity: 260 l Pump Pressure: 3 bar Pump Flow Rate: 24 l/min Cooling Water Supply for Hydraulic Tank (Quantity): 10 l/min Cooling Water Connection for Hydraulic Tank (Temperature): 20 °C EQUIPMENT Full enclosure included Tailstock included Hydraulic system included Oil system included

Year of construction: 2000, condition: excellent (used), daylight width: 170 mm speed: approx. 25 m/min Ijdpfx Afsp E Eglsiobc working direction: any work roll diameter: 120 mm barrel length: 150 mm backup rolls: backup block/chain

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Iedsuz If Nepfx Afijbc Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, machine/vehicle number: 109987 - 2800015, workpiece diameter (max.): 38 mm, workpiece length (max.): 500 mm, stroke length: 1,950 mm, Suitable for chipless cold forming of profiles such as splines (straight or helical), spiral gears, oil grooves, CV joints, threads and knurls TECHNICAL DETAILS Workpiece diameter: 38 mm Workpiece length: 500 mm Rack length – max.: 610 mm Max. slide stroke: 1,950 mm Max. rolling bar length: 1,400 + 330 mm Max. profile external diameter (standard): 60 mm Max. profile width (standard): 175 mm Rollable profiles for involute gears (module range): 0.3–2.0 MACHINE DETAILS Machine weight: 10 t Total power requirement: 52 kW Current type: 3 Ph Frequency: 50 Hz Operating voltage: 400 V Rated current: 99 A Overall width: 5,014 mm Ijdpfxswm Hqvs Afiebc Machine width: 4,560 mm Depth without boom: 2,541 mm Depth with boom: 4,165 mm Height: 2,100 mm Total weight (without automation): 14,500 kg Drive power: 45 kW Hydraulic tank capacity: 1,000 l EQUIPMENT - Machine in horizontal design - Complete enclosure - Tailstock - Hydraulic system - Oil system

Condition: excellent (used), strip width: 6 - 200 mm strip thickness: 6 – 0,5 mm speed: max. 100 m/min working direction: any Ijdpfxsp E Ed Rj Afiebc work roll diameter: 250 mm barrel length: 250 mm roll core for rolling rings: 190 mm

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 109853 - 280028, workpiece diameter (max.): 38 mm, workpiece length (max.): 500 mm, TECHNICAL DETAILS EX-CELL-O Cold Rolling Machine with Felsomat (1999) Design: Horizontal Area of application: Chipless cold forming of profiles such as splines (straight or helical), spiral gears, oil grooves, CV joints, threads, and knurls Ibjdpfewmb Trox Afisc Workpiece data Workpiece diameter: 38 mm Workpiece length: 500 mm Profile width: 92 mm Profile outer diameter (standard): 50 mm Profile width (standard): 125 mm Rollable profiles for involute gears: 0.3 - 1.25 m Rolling bar length: 610 mm Travel movements Slide stroke: 760 mm Cycle times Tailstock forward (at approx. 300 mm stroke): 1.0 s Rolling bars forward: 3.0 s Tailstock retraction (at approx. 300 mm) Stroke): 1.5 s Rolling bars return: 3.5 s Loading/unloading (manual): 5.0 s Cycle time: 14.0 s Gear cuts/hour at 100% Ne: 260 MACHINE DETAILS Overall width: 5,014 mm Machine width: 2,360 mm Depth without boom: 2,541 mm Depth with boom: 4,165 mm Height: 2,100 mm Machine weight: 10 t Electrical design – Voltage/Frequency: 380/50 V/Hz Total power requirement: 24 kW Drive power: 22 kW EQUIPMENT - Complete enclosure - Tailstock - Hydraulic system - Oil system

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, workpiece diameter (max.): 160 mm, rotational speed (max.): 300 rpm, workpiece length (max.): 25 mm, TECHNICAL DETAILS Description: Hydraulic internal rolling machine for tapered or cylindrical back rolling of profiles on sliding sleeves, sliding gears, or similar parts. Workpiece Data Workpiece diameter: 160 mm Workpiece length: 25 mm Workpiece internal gearing, adjusted approx.: 85 mm Workpiece external: 75 - 140 mm Workpiece width approx.: 16 - 36 mm Workpiece external pressure ring, adjusted: 160 mm Travel and setting data Maximum travel of the rolling carriage: 60 mm Center distance between workpiece and rolling wheel: 22 mm Rolling wheel speeds, continuously adjustable: 30 - 300 rpm Rolling pressure, continuously adjustable (at 100 bar): 6.1 t Control system: SIEMENS PLC Monitoring control: LAUER PCS 900 / BRANKAMP C 90 with screen display MACHINE DETAILS Machine weight approx.: 4,500 kg Ibedpfx Ajwmb Rksfioc Space required approx.: 2.5 x 2.5 x 2.1 m Spindle drive approx.: 6 kW Total drive: 14 kW Total power requirement: 14 kW Operating voltage: 400 V Frequency: 50 Hz EQUIPMENT - Workpiece carousel loading device for 18 workpieces with workpiece inspection station - Workpiece transport device - Changeover time to a different workpiece size: 30 min / Machining time per workpiece approx.: 25 s - Workpiece storage for intermediate storage - Separate hydraulic system - Separate control cabinet - Coolant system Note: Working areas are approximate and depend on the workpiece and tool conditions.

Condition: used, Year of construction: 1991, functionality: fully functional, total height: 3,888 mm, total length: 10,207 mm, total width: 4,498 mm, type of input current: three-phase, filling opening width: 2,200 mm, stroke length: 60 mm, For sale is a used but technically well-maintained machine, which was reliably in production operation until the end of June 2024. Despite its age, it still provides a solid foundation for use in manufacturing applications. Iedswzk Alepfx Afiebc Technical Details and Features: Year of manufacture / Last use: In production until the end of June 2024 Control system: Original condition, fully functional Condition: Used, but in good technical condition Strip feeder: Modern strip feed for efficient material handling Drive: Equipped with robust drive couplings Clutches: Fitted with large clutches featuring cup seal technology, as found in the latest machine design – ensuring reliable power transmission Compaction: Compaction units correspond to proven standard design Crimping rollers: Used profile and condition, but well maintained – no major damage Conveyor belts: Used, but in working condition Viewing panels: Made from Makrolon, should be replaced The machine is currently dismantled but can be inspected. Summary: This machine is ideally suited for companies seeking proven and reliable technology at an attractive price. Thanks to the modern strip feed and up-to-date clutch technology, efficient production processes remain possible. With manageable maintenance requirements (e.g. replacement of the Makrolon panels), the machine can be quickly integrated into existing production lines. Inspection by appointment possible.

Condition: good (used), Year of construction: 2008, functionality: fully functional, filling opening width: 1,400 mm, total width: 4,950 mm, total height: 4,443 mm, total length: 8,093 mm, type of input current: three-phase, stroke length: 60 mm, For sale is a used but technically well-maintained machine, which was in reliable operation until the end of June 2024. The machine is in full working order and is ideally suited for immediate re-use or as a solid base for custom modifications. Technical Features & Equipment: Modern belt feed The machine is equipped with a contemporary belt feed system, ensuring efficient and precise material handling. Drive couplings with bell-type sleeves Robust bell-type sleeves in the drive couplings provide reliable power transmission – easy to maintain and built for longevity. Large couplings, final stage version The machine is already fitted with the upgraded large-size couplings according to the latest machinery specification, offering enhanced stability and performance. Standardized compaction units The installed compaction units meet current industry standards, delivering consistent and powerful processing. Kneading rollers – good profile, used condition The kneading rollers are in a used but fully functional condition, with good tread profile remaining. Conveyor belts – used, but in good condition The conveyor belts show typical signs of wear but remain fully functional and well-preserved. Ibedpfswzkuzjx Afiec Note: The Makrolon viewing windows should be replaced as they display age-related signs of use. The machine is currently dismantled but can be inspected on site. This machine offers an excellent combination of reliability and modern technology, ideal for operations seeking a proven solution with up-to-date equipment features. For further questions or to arrange a viewing appointment, please do not hesitate to contact us.

Condition: like new (used), operating hours: 12 h, i3 Microclean UPGRADE DX PALLET SHAVING (€2,000) Like New – 1-Year Warranty Includes hoses and multiple nozzles. This machine is designed for industrial cleaning, scaling, and large-scale projects. A key advantage of this unit is its minimal use of new-generation electronics, resulting in enhanced reliability. The i3 Microclean is among the most powerful and aggressive machines currently available on the market and is in excellent condition. COLD JET machines are suitable for industrial cleaning, heavy-duty decontamination, and large projects. The absence of complex, modern electronics ensures maximum operational reliability and simplified maintenance. This machine remains in outstanding condition. Cold Jet i3 Microclean & Dry Ice Press – Complete Blasting Solution, Including the Following Equipment: • COLD JET i3 Microclean (12 operating hours) • 1 x 20’ blasting hose • 1 x Cold Jet applicator • 1 x nozzle Price: €24,500 This is one of the most highly regarded dry ice cleaning systems globally. With no sensitive electronics, it offers exceptional reliability and cost-effective maintenance. For inquiries or to schedule a viewing, please contact DrDryice. All machines come with a 1-year warranty. Cold Jet machine repair and maintenance services available. We also supply new Cold Jet machines – contact us for details. Worldwide shipping available. Cold Jet dry ice machine for sale dry ice blasting machine for sale dry ice blaster for sale buy dry ice blasting equipment Dry ice blasting machine for sale Cold Jet Aero 30 for sale Cold Jet Aero 40FP for sale Cold Jet Aero 40HP for sale Isdpfxjxga Tzo Afisbc Cold Jet Aero 75 for sale Cold Jet Aero 75 DX for sale Used Cold Jet machines for sale dry ice blasting systems – various Cold Jet models available Cold Jet dry ice machine repair and maintenance i3 Microclean Dry ice press

Condition: refurbished (used), Year of construction: 2006, operating hours: 1,716 h, functionality: fully functional, machine/vehicle number: 0071, input voltage: 220 V, overall weight: 59 kg, compressed air connection: 6 bar, air demand: 1 m³/h, Selling a micro-cleaner, Device work like Demo, some times for rent. Work hours is original. All is work. Ijdpfxjtth Spj Afiebc

Condition: excellent (used), Year of construction: 1990, the machine in perfect condition very good machine This is a combo machine pelletizer and sandblasting machine (two in one) very low operation hours Iedpfx Aohmi Ucofiobc

Condition: like new (used), functionality: fully functional, Year of construction: 2017, operating hours: 9 h, i3 Microclean & Dry Ice Press (can possibly be purchased separately) !!!! Condition: Like New | 1-Year Warranty Includes hoses and multiple nozzles. This machine is suitable for industrial cleaning, from detail work to very large-scale projects. A key advantage of this unit is its lack of new-generation electronic components, ensuring durability and ease of maintenance. It is one of the most aggressive and effective dry ice blasting machines on the market. The machine is in excellent condition. The COLD JET machine is ideal for industrial cleaning, tackling both small and large jobs. Its straightforward, electronics-free design makes it exceptionally reliable and cost-effective to maintain. For sale: Complete Cold Jet i3 Microclean & Dry Ice Press Blasting Package, comprising: COLD JET i3 Microclean (Only 9 operating hours) - 1 x 20’ (6 m) Blasting Hose - 1 x Cold Jet Applicator - 1 x Nozzle Price: €27,500 Recognized as one of the best machines in its class worldwide, the absence of electronic systems enhances its reliability and reduces maintenance costs. For inquiries or to schedule a viewing, please contact us at DrDryice. All machines sold are covered by a 1-year warranty. We offer repairs and maintenance services for all Cold Jet machines. New Cold Jet machines are also available—please contact us for more information. Ibsdpfx Afow In Iwoiec Worldwide shipping available. Key search terms: - Cold Jet dry ice machine for sale - Dry ice machine for sale - Dry ice blasting machine for sale - Dry ice blaster for sale - Buy dry ice blasting machine - Dry ice blasting equipment – dry ice blasting | dry ice machine | dry ice blaster - Cold Jet Aero 30 for sale - Cold Jet Aero 40FP for sale - Cold Jet Aero 40HP for sale - Cold Jet Aero 75 for sale - Cold Jet Aero 75 DX for sale - Used Cold Jet machine for sale - Dry ice blasting machines – various Cold Jet models - Service and repair of Cold Jet dry ice machines - i3 Microclean - Dry Ice Press

Condition: like new (used), Year of construction: 2007, operating hours: 151 h, functionality: fully functional, warranty duration: 12 months, Coldjet Aero30 Machine is as new This machine is suitable for industrial cleaning, both for everyday tasks and for very large projects. A key advantage of this machine is the lack of complex new-generation electronics, making it one of the most robust and aggressive machines on the market. The machine is in excellent condition. Cold Jet Aero 30 Dry Ice Blasting Machine – Complete with the Following Equipment: COLDJET AERO 30 DRY ICE (151 HOURS RUN) - 1 x 20’ Blasting Hose - 1 x Cold Jet Applicator - 2 x Nozzles NEW Price: €14,900 Iedpfxewg R Rme Afiebc NO VAT NO TAX This is one of the best machines in the world. It is entirely free from unnecessary electronics, ensuring reliability and keeping maintenance costs low. For inquiries or to arrange a viewing, please contact us – Dr.Dryice. All machines sold come with a 1-year warranty. We provide repairs and maintenance for Cold Jet machines. New Cold Jet machines available on request – please contact us. Worldwide Shipping. Cold Jet dry ice machine for sale dry ice machine for sale dry ice blasting machine for sale dry ice blaster for sale buy dry ice blasting machine dry ice blasting unit – dry ice blasting | dry ice machine | dry ice blaster Cold Jet Aero 30 for sale Cold Jet Aero 40FP for sale Cold Jet Aero 40HP for sale Cold Jet Aero 75 for sale Cold Jet Aero 75 DX for sale Used Cold Jet machine for sale dry ice blasting machine for sale Dry ice blasting machines, various Cold Jet models Cold Jet dry ice machine maintenance and repair

Condition: like new (used), functionality: fully functional, operating hours: 112 h, LIMITED EDITION No. 60 Cold Jet Limited Edition 20th Anniversary. COLD JET AERO 75 DX 20BAR 300PSI This machine is suitable for industrial cleaning, remediation, and large-scale projects. The key advantage of this unit is its minimal use of advanced electronics, making it one of the most robust and aggressive dry ice blasting machines available on the market. The machine is in excellent condition. Cold Jet Aero 75 DX Dry Ice Blasting Machine Complete with the Following Equipment: COLD JET AERO 75 DX DRY ICE Blaster (112 operating hours) Includes: - 1 x 20’ Blasting Hose - 1 x Cold Jet Applicator - 2 x Nozzles NEW Price: €21,800 This is one of the top-performing dry ice cleaning machines in the world. It contains no sensitive electronics, which makes it highly reliable and cost-effective to maintain. For inquiries or to schedule a viewing, please contact us at DrDryice. All machines sold come with a 1-year warranty. We provide repair and maintenance services for Cold Jet equipment and also supply new Cold Jet machines. Contact us for further information. Worldwide shipping available. Cold Jet dry ice machine for sale Dry ice machine for sale Dry ice blasting machine for sale Dry ice blaster for sale Buy dry ice blasting machine Dry ice blasting – dry ice blasting equipment | dry ice machine | dry-ice blaster Cold Jet Aero 30 for sale Iedpew Ixcrjfx Afisbc Cold Jet Aero 40FP for sale Cold Jet Aero 40HP for sale Cold Jet Aero 75 for sale Cold Jet Aero 75 DX for sale Used Cold Jet machines for sale Dry ice blasting machines for sale Dry ice blasting machines Cold Jet various models Maintenance and repair of Cold Jet dry ice machines

Condition: like new (used), Year of construction: 2012, operating hours: 191 h, functionality: fully functional, compressed air connection: 20 bar, pressure: 20 bar, Cold Jet Aero 40 HP This machine is suitable for industrial cleaning, from routine tasks to very large projects. The advantage of this unit is its lack of next-generation electronics, making it straightforward and robust. It is considered one of the most aggressive and effective machines on the market. The machine is in excellent condition. Cold Jet Aero 40 HP Dry Ice Blasting Machine – Complete with the Following Equipment: - COLD JET AERO 40 HP DRY ICE BLASTER (191 HOURS RUN) - 1 x 20’ Blasting Hose - 1 x Cold Jet Applicator - 2 x Nozzles (NEW) Price: €19,500 This is one of the best machines available worldwide. It contains no electronic control systems, which makes it extremely reliable and reduces maintenance costs. For inquiries or to arrange a viewing, please contact DrDryice. All machines are sold with a 1-year warranty. We offer repairs and maintenance for Cold Jet machines and also supply new Cold Jet models. Contact us for more information. Worldwide shipping available. Relevant keywords: Isdpfxowyk Uxo Afiebc Cold Jet dry ice machine for sale dry ice machine for sale dry ice blasting machine for sale dry ice blaster for sale buy dry ice blasting machine Dry ice blasting machine | dry ice blaster | dry ice cleaning Cold Jet Aero 30 for sale Cold Jet Aero 40FP for sale Cold Jet Aero 40HP for sale Cold Jet Aero 75 for sale Cold Jet Aero 75 DX for sale Used Cold Jet machine for sale dry ice blasting machine for sale Cold Jet dry ice blasting machines various models Maintenance and repair of Cold Jet dry ice machines

Condition: used, Year of construction: 2008, operating hours: 256 h, functionality: fully functional, compressed air connection: 9.6 bar, operating pressure: 10 bar, Cold Jet Aero 75 This machine is ideal for industrial cleaning, heavy-duty, and large-scale projects. Its key advantage is the absence of complex modern electronics, making it highly reliable and straightforward to maintain. Recognized as one of the most aggressive and efficient machines available on the market, this particular unit is in excellent condition. Cold Jet Aero 75 Dry Ice Blasting Machine Complete with the Following Equipment: - COLD JET AERO 75 DRY ICE (256 HOURS RUN) - 1 x 20’ Blasting Hose - 1 x Coldjet Applicator - 2 x Nozzles (NEW) Price: €16,500 Ibodpjwynncefx Afioc Considered one of the best machines worldwide—no onboard electronics, ensuring reliability and low maintenance costs. For inquiries or to arrange a viewing, please contact us at DrDryice. All machines are sold with a 1-year warranty. We also perform repairs and maintenance on Cold Jet machines, and supply new Cold Jet units. Get in touch for more information. Worldwide shipping available. Cold Jet dry ice machine for sale dry ice machine for sale dry ice blasting machine for sale Dry ice blaster for sale buy dry ice blasting machine Dry ice blasting machine – dry ice blasting | dry ice machine | dry-ice blaster Cold Jet Aero 30 for sale Cold Jet Aero 40FP for sale Cold Jet Aero 40HP for sale Cold Jet Aero 75 for sale Cold Jet Aero 75 DX for sale Used Cold Jet machine for sale Dry ice blasting machine for sale Dry ice blasting machines – various Cold Jet models Service and repairs for Cold Jet dry ice machines

Condition: like new (used), Year of construction: 2008, operating hours: 12 h, functionality: fully functional, warranty duration: 12 months, Cold Jet Aero 75 DX Machine – Like New Condition This machine is designed for industrial cleaning, including the toughest large-scale applications. A key advantage of this model is that it does not feature complex new-generation electronics, making it highly reliable and easier to service. It is regarded as one of the most powerful dry ice blasting units available on the market. The machine is exceptionally well-maintained and in pristine condition. Specification: COLD JET AERO 75 DX DRY ICE BLASTING MACHINE (ONLY 12 OPERATING HOURS) Package Includes: - 1 x 20’ Blasting Hose - 1 x Cold Jet Applicator - 2 x Nozzles (NEW) Price: €21,800 This is one of the top-performing dry ice blasting machines worldwide. With no complex electronics, it is dependable and cost-effective to maintain. Estimated New Price: €42,000 For inquiries or to arrange an inspection, please contact DrDryice. All machines are sold with a 1-year warranty. Iodpfewg R Edsx Afiobc We provide repairs and maintenance for Cold Jet machines. We also offer new Cold Jet systems. Please contact us for further information. Worldwide Shipping Available. Keywords: Cold Jet dry ice machine for sale Dry ice machine for sale Dry ice blasting machine for sale Dry ice blaster for sale Buy dry ice blasting machine Cold Jet Aero 30 for sale Cold Jet Aero 40FP for sale Cold Jet Aero 40HP for sale Cold Jet Aero 75 for sale Cold Jet Aero 75 DX for sale Used Cold Jet machine for sale Dry ice blasting machine for sale (various Cold Jet models) Maintenance and repair of Cold Jet dry ice machines

Condition: like new (used), Year of construction: 2019, operating hours: 1,450 h, functionality: fully functional, Dry Ice Dosing & Bagging System. Automated Production & Bagging System. Automatic Dosing & Packaging System for Dry Ice Pellets. New price currently around € 250,000 Description: Complete system for dosing and packaging dry ice pellets. Fully automated process with high capacity and reliability. Specifications: * Dosing capacity: up to 10 drops/min of 800 g (tolerance ±5%) * Packaging capacity: up to 25 bags/min (depending on bag size) Isdpfx Afsw Ttxfeijbc * Maximum bag width: 230 mm, maximum film width: 600 mm * Works with 40-micron BOPP film (optional with perforation and print) * Includes: vibration dosing system, conveyors, bagging machine, accumulation table Advantages: * Fully automated dosing, filling, and packaging * Stable and reliable operation, approved in validation tests * Eco-friendly and efficient solution for dry ice production * Usable for up to 1,600 operating hours per year