Used Residual Ozone Destroyer for sale (1,022)

Condition: new, Year of construction: 2022, DOBOT Robot CR12A CRA Collaborative Robot Series – Safe, Flexible, and Self-Learning Collaborative Robot Building upon the safety, efficiency, flexibility, and user-friendliness of the CR series, the CR12A surpasses the payload limit of 12 kg, opening up a wider range of applications for collaborative robots. With a working radius of 1200 mm, the CR12A meets the demands of heavy-duty picking, packaging, palletizing, and welding in the automotive, home appliance, logistics, and metalworking industries. User-Friendly Design for Faster Deployment The CR12A features the industry’s first dual-channel end-effector design, allowing direct connection to multiple end tools. It also provides a visual status indicator on the base for intuitive recognition of the operating state. Greater Possibilities with High Payload and Large Reach The CR12A offers a working radius of 1200 mm and a maximum payload of 12 kg. Thanks to an advanced motion control algorithm, the CR12A operates with improved stability and exhibits up to 50% less residual vibration during rapid emergency stops. Nwedpfjyibamsx Ahvec 24 Interface Ports for Maximum Flexibility The CR12A supports Profinet and Ethernet/IP communication protocols and integrates seamlessly with PLC systems. It features 24 digital I/O ports, leading the industry in supporting both PNP and NPN wiring for hassle-free application expansion. High Level of Protection for Safe Collaboration Both the robot housing and controller unit are rated IP54 for protection. In case of overload, the robot automatically triggers an alarm. The CR12A is also equipped with an innovative electromagnetic brake system that reduces the drop height of the end tool in the event of a power failure. Application Scenarios: - Assembly - Sorting - Adhesive Application - Placement - Palletizing - Material Handling - Welding

Condition: used, Year of construction: 2017, power: 2.2 kW (2.99 HP), input voltage: 400 V, volume flow: 1,593 m³/h, suction capacity: 1,593 m³/h, filter area: 9.5 m², total height: 2,200 mm, total length: 1,800 mm, total width: 1,000 mm, overall weight: 350 kg, nominal flow rate: 1,447 m³/h, negative pressure: 2,200 Pa, nominal power: 2.2 kW (2.99 HP), space requirement height: 2,200 mm, space requirement length: 1,800 mm, space requirement width: 1,000 mm, transport length: 1,800 mm, transport width: 1,000 mm, transport height: 2,200 mm, tank capacity: 240 l, No. 04517 Mobile extraction unit / mobile dust extractor Schuko Vacomat 140/160 XPe Unused, year of construction 2017, in new condition Extraction diameter 140 / 160 mm, can be changed using a reducer Residual dust value H3, 0.1 mg/m3 Suitable for extracting combustible dusts The Vacomat 140/160 XPe mobile dust extractor is ideal for single machine extraction. Air volumes of up to 1593 m3/h can be conveyed with this extraction system using the vacuum method, e.g. for dedusting sliding table saws, jointers or thicknessers. The dust/chip mixture is discharged into a dust-tight chip collection container (240 l) with an inserted plastic bag. A vacuum channel holds the plastic bag securely in the collection container. Viewing windows make it easier to check the fill level. The Vacomat 140/160 XPe mobile dust extractor automatically monitors its extraction performance via a pressure cell and guarantees maximum operational safety. In the Vacomat 140/160 XPe, a vibrating motor cleans the filter bags electro-mechanically. No connection to compressed air and therefore no compressor is required. It can be controlled via the query of the woodworking machine using potential-free contacts. The Vacomat 140/160 XPe mobile dust extractor is fitted with patented SchukoCone filter bags as standard. The SchukoCone filter bags are particularly suitable for fine dusts. Nominal volume flow 1447 m3/h Vacuum pressure 2200 Pa Motor power 400 V, 2.2 kW Filter area 9.5 m2 Filter material dust class “M” CE-compliant GS-tested Complete technical documentation available Transport dimensions approx. 1800 x 1000 x 2200 mm LWH Weight approx. 350 kg To avoid possible misunderstandings, an on-site inspection is possible and recommended by appointment Sold as is Nsdpsygbbhjfx Ahvewc Technical specifications, condition description, year of construction and scope of delivery according to manufacturer's brochure or previous owner, without guarantee Subject to prior sale For used machines, any warranty is excluded, the following applies: “sold as seen” Terms of payment: Prices plus VAT, payment before collection or dispatch Terms of delivery: ex warehouse

Condition: new, Year of construction: 2025, Dobot Robot CR3A Collaborative Robot Series – Safe, Flexible, and Self-Learning Collaborative Robot Building on the safety, efficiency, flexibility, and user-friendliness of the CR series, the CR3A exceeds the 3 kg payload limit, opening up a broader range of applications for collaborative robots. With a working radius of 620 mm, the CR3A meets the requirements for heavy-duty picking, packing, palletizing, and welding in the automotive, home appliance, logistics, and metalworking industries. User-Friendly Design for Faster Deployment The CR3A features the industry's first dual-channel end effector design, allowing direct connection to multiple end tools. It also offers a visual status indicator on the base for intuitive recognition of operating status. Increased Versatility with High Payload and Large Reach The CR3A offers a working radius of 620 mm and a maximum payload of 3 kg. Thanks to an advanced motion control algorithm, the CR3A operates more stably and exhibits 50% less residual vibration during rapid emergency stops. Njdjyia E Ijpfx Ahvewc 24 Interface Ports for Greater Flexibility The CR3A supports Profinet and Ethernet/IP communication protocols and can be seamlessly connected to PLCs. It is equipped with 24 digital I/O ports with industry-leading support for both PNP and NPN configurations, facilitating easy application expansion. High Protection Level for Safe Collaboration Both the robot arm and control unit comply with the high IP54 protection rating. In case of overload, the robot automatically triggers an alert. The CR3A also features an innovative electromagnetic brake safety system that minimizes end-tool drop distance in the event of a power failure. Application Scenarios: - Assembly - Sorting - Gluing - Placement - Palletizing - Handling - Welding

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 2009094, Year of construction: 2019, operating hours: 90 h, load capacity: 1,620 kg, lifting height: 4,060 mm, free lift: 897 mm, load center: 600 mm, fuel type: electric, mast type: triplex, construction height: 1,995 mm, battery capacity: 270 Ah, battery voltage: 24 V, fork carriage width: 1,500 mm, fork length: 1,200 mm, fork width: 100 mm, fork thickness: 40 mm, tire condition: 100 %, front tire type: polyurethane tires (non-marking), rear tire type: polyurethane tires (non-marking), empty load weight: 2,905 kg, total height: 1,995 mm, total length: 2,141 mm, total width: 1,500 mm, color: orange, Equipment: CE marking, adjustable boom, fork extension, front guard, full service history, pallet forks, retractable fork, Genkinger EGY-S 18/40 4-Way Forklift with Pantograph DEMO UNIT Excellent condition, after full service. Full documentation Fully operational Including battery and charger Drive: Electric (4-way; can drive sideways) Fork Lift Height (mm): 50 – 4060 mm Operation: Tiller-driven with Pantograph Nwodpoyh Uftofx Ahvsc Residual Load Capacity up to 2,500 mm: 1,620 kg at 600 mm LSP Residual Load Capacity up to 3,000 mm: 1,530 kg at 600 mm LSP Residual Load Capacity up to 3,500 mm: 1,440 kg at 600 mm LSP Residual Load Capacity up to 4,000 mm: 1,350 kg at 600 mm LSP

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, - loading table for jumbo sizes 6000 x 3210 mm with integrated transport belts - laminated glass cutting module with cutting length : 4600 mm 4 unloading arms Njdpfjyh T Ruox Ahvjwc new heating element from december 2025 min. glass thikness : 3 + 3 mm + PVB max.glass thikness: 8 + 8 mm + PVB Knife separation : After automatic cutting and separation the PVB is cut by a blade giving a clean edge without any residue PC control system windows PC " View Plus " including flat screen monitor with cutting pattern display and optimisation import Lay out attached in photos

Condition: new, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,650 mm, loading space volume: 93 m³, Chassis Version with continuous chassis reinforced, new body manufactured in a self-supporting design with corresponding reinforcements in the lower flange for particularly high stability and strength, cross member 140 mm high reinforced version (for high ground loads) additional reinforcement as gusset plate in the front lower flange/vehicle frame area, chassis made of galvanized steel up to the support structure, (trailer construction max. 39,000 kg) Axles and suspension "Disc brake 22.5" Jost (DCA) axle units version, 3x9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard Infocenter, electronic brake wear indicator BVA-readable in the tractor unit (display), 1st axle with traction aid (new EC regulation, without tractor unit equipment), (on request against MP 1st + 3rd axle liftable) Tires and wheels 6 wheels with tires of size 385/65 R 22 .5 according to manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75?22.5 ET 120 Nwjdpjgcw Rmofx Ahvec Seatposts mechanical support winches with two speeds, 2x 20 ton support load with swivel foot, Braking system according to E.G. standard?EBS E-system Wabco with RSS system (roll stability support) and premium modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system, electrical system according to the guidelines of the EC standard 91/633 and 97/28 with 2 five-chamber lights type Aspöck Europoint 3 integrated in the aluminum rear end, 24 volt system with 1?15 pin and 2x7 pin. Socket, with side clearance lights in LED design, 2 reflective panels on the rear, 2 white position lights at the front and 2 at the rear. red, 2 separate LED reversing lights integrated in the U-protection Structure/trough "structure fully welded inside" reinforced side walls, front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn Aluminum trough, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide completely welded with lower and upper belt, plank profiles fully welded inside, floor laid as a sliding floor system on 140 mm aluminum cross beams, floor forklift load approx. 9 ton/m2 cross beams mounted accordingly closely (approx. 350 mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in straight design, special aluminum corner profiles in beveled design, smooth rear wall in straight design with 2 aluminum wing doors 50/30 mm thick with 2 pivot rods Locks in the welded aluminum rear frame attached to Teflon bearings and stainless steel bearings, doors secured in the open position with a chain on each side, hard wear plates on the side walls approx. 2,000x1,500x4mm fully welded, running residual emptying wall with Kevlar tarpaulin approx. 1,800 mm long plus side with Kevl. -Plane sealing, service door in front wall with ladder turning inwards Hydraulic system "Cargo - Floor" sliding floor system Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE?HD sliders plus anti-lifting slide bearings, type CF 10 mm floor version, hydraulics with approx. 200 mm working stroke, fixed halves on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the sliding floor, electric. Rear left control with radio control integrated in a lockable waterproof box, without hydraulic hoses Accessories 6 PV

Condition: new, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,650 mm, loading space volume: 93 m³, Chassis Version with continuous chassis reinforced, new body manufactured in a self-supporting design with corresponding reinforcements in the lower flange for particularly high stability and strength, cross member 140 mm high reinforced version (for high ground loads) additional reinforcement as gusset plate in the front lower flange/vehicle frame area, chassis made of galvanized steel up to the support structure, (trailer construction max. 39,000 kg) Axles and suspension "Disc brake 22.5" Jost (DCA) axle units version, 3x9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard Infocenter, electronic brake wear indicator BVA-readable in the tractor unit (display), 1st axle with traction aid (new EC regulation, without tractor unit equipment), (on request against MP 1st + 3rd axle liftable) Tires and wheels 6 wheels with tires of size 385/65 R 22 .5 according to manufacturer's choice (Br-Go-Co) on silver steel rims, 11.75?22.5 ET 120 Seatposts mechanical support winches with two speeds, 2x 20 ton support load with swivel foot, Braking system according to E.G. standard?EBS E-system Wabco with RSS system (roll stability support) and premium modulator, spring brake system acting on two axles with operation at the rear, aluminum air tank system, electrical system according to the guidelines of the EC standard 91/633 and 97/28 with 2 five-chamber lights type Aspöck Europoint 3 integrated in the aluminum rear end, 24 volt system with 1?15 pin and 2x7 pin. Socket, with side clearance lights in LED design, 2 reflective panels on the rear, 2 white position lights at the front and 2 at the rear. red, 2 separate LED reversing lights integrated in the U-protection Structure/trough "structure fully welded inside" reinforced side walls, front wall load 17,250 dkn, side and rear wall 13,400/10,400 dkn Aluminum trough, side walls 30 mm thick aluminum plank profiles (2-3 mm) 600 mm wide completely welded with lower and upper belt, plank profiles fully welded inside, floor laid as a sliding floor system on 140 mm aluminum cross beams, floor forklift load Nedpfx Ahsyh S Aievewc approx. 9 ton/m2 cross beams mounted accordingly closely (approx. 350 mm), aluminum front wall with 600 mm plank profile 2-3 mm thick in straight design, special aluminum corner profiles in beveled design, smooth rear wall in straight design with 2 aluminum wing doors 50/30 mm thick with 2 pivot rods Locks in the welded aluminum rear frame attached to Teflon bearings and stainless steel bearings, doors secured in the open position with a chain on each side, hard wear plates on the side walls approx. 2,000x1,500x4mm fully welded, running residual emptying wall with Kevlar tarpaulin approx. 1,800 mm long plus side with Kevl. -Plane sealing, service door in front wall with ladder turning inwards Hydraulic system "Cargo - Floor" sliding floor system Sliding floor system in the floor with hydraulically moved aluminum profiles on aluminum square profiles with approx. 880 PE?HD sliders plus anti-lifting slide bearings, type CF 10 mm floor version, hydraulics with approx. 200 mm working stroke, fixed halves on the front wall, separate option for connecting the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and design to be specified, operating pressure 190-max. 240 bar, aluminum end pieces welded into the sliding floor, electric. Rear left control with radio control integrated in a lockable waterproof box, without hydraulic hoses Accessories 6 PV

Condition: new, maximum load weight: 28,320 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 13,535 mm, loading space width: 2,480 mm, loading space height: 2,750 mm, loading space volume: 92 m³, Equipment: ABS, Chassis: Version with continuous chassis, newly manufactured in self-supporting ALU construction with corresponding reinforcements in the lower chord for particularly high stability and strength, cross member 140mm high reinforced version (for high floor load) additional reinforcement as gusset plate in the front lower chord/vehicle frame area, chassis made of galvanized steel up to support structure Axles and suspension: Disc brake 22.5, Jost (DCA) axle units, 3x9 tons with DCA air suspension, lifting and lowering, Wabco Smartboard Infocenter, electronic brake wear indicator BVA readable in the SZM (display), 1st axle with starting aid (new EC regulation, without SZM equipment), (on request against MP 1st + 3rd axle liftable) Tires and wheels: 6 wheels with tires size 385/65 R 22.5 according to manufacturer's choice (Br-Go-Co) on steel rims silver, 11, 75x22.5 ET 120 Kingpin: 2" - screwed into a 10 mm thick plate Fifth wheels: mechanical landing gear with two speeds, 2x 20 tons drawbar load with swivel foot Brake system: according to E.G. standard, EBS E system Wabco with RSS system (Roll-Stability-Support) and Premium Modulator, spring brake system acting on two axles with operation at the rear, ALU air reservoir system Nedjfi Nmwspfx Ahvowc Electrical system: according to the guidelines of EC standard 91/633 and 97/28 with 2 five-chamber lights type Aspöck Europoint integrated in the ALU rear end, 24 volt system with 1x15 pole and 2x7 pole socket, with side outline lights in LED design, 2 reflective panels on the rear, front pole lights 2x white, rear 2x red, 2 sep. halogen reversing lights integrated in the U-protection Body/body: Body fully welded on the inside, reinforced side walls Side walls, front wall load 17,250 dkn, side and rear wall 13,400 dkn/10,400 aluminum trough, side walls 30mm thick ALU plank profiles (2-3 mm) 600mm wide completely welded in with bottom and top chord, plank profiles fully welded inside, floor laid as a moving floor system on 140mm ALU cross beams, floor stacker load approx. 9 to/m2 Cross beams mounted correspondingly narrow (approx. 350mm), design, special aluminum corner profiles in bevelled design smooth rear wall in straight design with 2 ALU hinged doors 50/30mm thick with 2 espagnolettes Locks in welded-in ALU rear frame fixed in Teflon bearing and Inox bearing, Doors secured in open position with one chain on each side, hard wear plates on the side walls approx. 2000x1500x4mm fully welded, moving residual emptying wall with Kevlar tarpaulin approx. 1800mm long plus side brushes with Kevlar tarpaulin seal, service door in front wall with ladder turning inwards Hydraulic system: Moving floor system in the floor with hydraulically moved ALU profiles on ALU square profiles with approx. 880 PE-HD sliders plus anti-lifting plain bearings, type CF 10mm floor version, hydraulics with approx. 200mm working stroke, fixed halves on the front wall, separate possibility for connection of the hydraulic line under the vehicle with fixed halves, line size NW 21, fixed halves with size and design still to be specified, operating pressure 190-max.240 bar, ALU end pieces welded into the sliding floor, electrical operation behind left with remote control integrated in a lockable watertight box, without hydraulic hoses Accessories: 6 PVC mudguards with 2 anti-spray mud flaps, 6 PVC splash plates above the wheels, 1 ALU e-wheel holder, lateral ALU collision protection in folding design, 1 tool box approx. 860x460x400mm in plasti

Condition: new, mileage: 300 km, power: 330 kW (448.67 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,700 mm, loading space volume: 44 m³, loading space length: 7,720 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, tail-lift, * Orten Kettliner swivel wall system * 4-row load securing * DEKRA certified * Beverage certificate * Draft beer certificate * 2,000 kg Bär tail lift * Storage box for E-Ant * StreamSpace driver's cab 2.3/170 * Liftable trailing axle * Retarder * Rear view camera * Sun visor * Fully air-suspended * Air conditioning * Distance cruise control * High beam assistant and cornering light * Trailer stabilization program * Cockpit Multimedia Interactive * Lane keeping assistant * Stability control assistant * Attention assistant * Traffic sign assistant * Active Brake Assist * Active Sideguard Assist * ATS warranty 3 years/450,000 km Matching tandem swivel wall trailer available for an additional charge: Make: Orten Loading space dimensions: 7,720 x 2,480 x 2,200 mm * SAF axles * Disc brakes * Fully air-suspended * Orten Kettliner body Nedoyh Sw Tjpfx Ahvewc * 4-row load securing * DERKA certified * 2,000 Bär tail lift ----Financing example from our bank: Leasing: Monthly rate: from 2,177.00 ¤ Down payment: 15% Term: 60 months, residual value: 30% Leasing: Monthly rate: from 2,699.00 ¤ Down payment: 0% Term: 60 months, residual value: 30% Creditworthiness required. Offer subject to change ----Special equipment: Front axle load 8.0 t, driver's side airbag, trailer stabilization program TSA, standard and DuoMatic brake connection, interactive multimedia cockpit, compressed air horn, driver assistance system: high beam assistant and cornering light, vehicle without rear underrun protection, 150 A generator, regulated, 12-speed gearbox - type: G 211-12, automatic air conditioning, 3-part fender, 3-part fender with splash guard, fuel tank: 500 ltr. aluminum, left, 2-cyl. air compressor, reinforced engine brake, 7.5 t trailing axle steered, load-relieving, liftable, wheelbase variant 4900 mm, frame overhang 2250 mm, rain sensor, acoustic reversing alarm (external warning signal), tail lift switch, additional key with remote control (2), drawers under parapet, seat cover / upholstery: Velours passenger seat, seat cover/upholstery: Velours driver's seat, seats in the driver's cab: armrests on both sides of the passenger seat, seats in the driver's cab: comfort driver's seat, sun visor outside, sun blind on the side window, driver's door, storage flap outside on the left, additional 24V socket in the passenger footwell, preparation for 4 surrounding cameras (display in the on-board monitor), preparation for cool box/refrigerator, curtain for sleeping cabin, seat belt warning device Other equipment: Emissions standard EURO 6, storage above the windscreen with cover, axle configuration: 6x2, Actros 5, Actros driver's cab L, heated approach/front mirror, trailer brake 2 - line, connections on the left, trailer socket 24V/15-pin, exhaust to the right outside, equipment package: Powertrain 2, outside mirror camera MirrorCam, 220 Ah battery, batteries arranged next to each other, rear axle differential lock, torque increase 12th gear, compressed air connection in the driver's cab, steel compressed air tank, compressed air unit with Condensate monitoring, medium compressed air unit, automatic switch-on for driving lights (light sensor), driver assistance system: Attention Assist (fatigue detection sensor), driver assistance system: Autonomous emergency braking assistant (Active Brake-Assist 5), driver assistance system: Lane departure warning system, driver's cab: rigid cab entrance, driver's cab: chrome interior package, driver's cab: hydraulic tilting device

Condition: new, mileage: 300 km, power: 330 kW (448.67 HP), fuel type: diesel, overall weight: 26,000 kg, axle configuration: 3 axles, brakes: retarder, color: white, gearing type: automatic, emission class: euro6, total width: 2,550 mm, total height: 3,700 mm, loading space volume: 44 m³, loading space length: 7,720 mm, loading space width: 2,480 mm, loading space height: 2,200 mm, Year of construction: 2025, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, tail-lift, * Orten Kettliner swivel wall system * 4-row load securing * DEKRA certified * Beverage certificate * Draft beer certificate * 2,000 kg Bär tail lift * Storage box for E-Ant * StreamSpace driver's cab 2.3/170 * Liftable trailing axle * Retarder * Rear view camera * Sun visor * Fully air-suspended * Air conditioning * Adaptive cruise control * High beam assistant and cornering light Nsdoyh Sw Hjpfx Ahvewc * Trailer stabilization program * Cockpit Multimedia Interactive * Lane keeping assistant * Stability control assistant * Attention assistant * Traffic sign assistant * Active Brake Assist * Active Sideguard Assist * ATS warranty 3 years/450,000 km with matching tandem swivel wall trailer: Make: Orten Loading space dimensions: 7,720 x 2,480 x 2,200 mm * SAF axles * Disc brakes * Fully air-suspended * Orten Kettliner body * 4-row load securing * DERKA certified * 2,000 Bär tail lift ----Financing example from our bank: Leasing: Monthly rate: from 2,177 euros Down payment: 15% Term: 60 months, residual value: 30% Leasing: Monthly rate: from 2,699 euros Down payment: 0% Term: 60 months, residual value: 30% Creditworthiness required. Offer subject to change ----Special equipment: Front axle load 8.0 t, driver's side airbag, trailer stabilization program TSA, standard and DuoMatic brake connection, interactive multimedia cockpit, compressed air horn, driver assistance system: high beam assistant and cornering light, vehicle without rear underrun protection, 150 A generator, regulated, 12-speed gearbox - type: G 211-12, automatic air conditioning, 3-part fender, 3-part fender with splash guard, fuel tank: 500 ltr. aluminum, left, 2-cyl. air compressor, reinforced engine brake, 7.5 t trailing axle steered, load-relieving, liftable, wheelbase variant 4900 mm, frame overhang 2250 mm, rain sensor, acoustic reversing alarm (external warning signal), tail lift switch, additional key with remote control (2), drawers under parapet, seat cover / upholstery: Velours passenger seat, seat cover/upholstery: Velours driver's seat, seats in the driver's cab: armrests on both sides of the passenger seat, seats in the driver's cab: comfort driver's seat, sun visor outside, sun blind on the side window, driver's door, storage flap outside on the left, additional 24V socket in the passenger footwell, preparation for 4 surrounding cameras (display in the on-board monitor), preparation for cool box/refrigerator, curtain for sleeping cabin, seat belt warning device Other equipment: Emissions standard EURO 6, storage above the windscreen with cover, axle configuration: 6x2, Actros 5, Actros driver's cab L, heated approach/front mirror, trailer brake 2 - line, connections on the left, trailer socket 24V/15-pin, exhaust to the right outside, equipment package: Powertrain 2, outside mirror camera MirrorCam, 220 Ah battery, batteries arranged next to each other, rear axle differential lock, torque increase 12th gear, compressed air connection in the driver's cab, steel compressed air tank, compressed air unit with Condensate monitoring, medium compressed air unit, automatic switch-on for driving lights (light sensor), driver assistance system: Attention Assist (fatigue detection sensor), driver assistance system: Autonomous Emergency Braking Assist (Active Brake Assist 5), driver assistance system: Lane Keeping Assist, driver's cab: rigid cab entrance, driver's cab: chrome interior package, driver's cab: hydraulic tilting device, driver's cab: L Strea

Year of construction: 2002, condition: ready for operation (used), With inlet control, base inspection, mouth surface inspection, 270° side wall and residual liquid inspection, for glass and PET bottles, machine needs overhauling. Nsdpfjf Evwzjx Ahvowc

Year of construction: 2000, condition: ready for operation (used), Compressed air supply: 6-12bar, running direction: right to left, inspection of: 2x sides, bottom, opening, 2x thread, residual liquid (HF and IR). Nwedpefgwtfofx Ahvec

Year of construction: 2005, condition: ready for operation (used), Drying capacity: 2x120W/cm, total drying capacity: 14000W, working width: 600mm, lamp type: 2x120W/cm, cooling: integrated, vacuum cassette: adjustable, conveyor belt speed: adjustable, machine dimensions X/Y/Z: approx. 3900mm/1200mm/1300mm, weight: approx. 700kg, operating hours: approx. 4400h. Including ozone extraction and a new measuring device UV-Integrator Full-UV with integrated heat shield and calibration certificate. 2 converters, 2 lamps and the belt have been replaced. Documentation available. On-site inspection is possible. Nedsu Afz Rspfx Ahvowc

Year of construction: 2014, condition: ready for operation (used), An industrial Pyreg pyrolysis plant for the thermochemical utilization of biogenic residual materials is available. Fuel capacity: 500kW/module, max. fuel throughput capacity per module: 1375kg/year, min. fuel lower heating value on dry basis: 10MJ/kg, max. fuel moisture content: 50%, biochar production: 40kg/h, thermal heat output (exhaust gas heat): 150kW, power consumption: approx. 7.5kW. Plant dimensions X/Y/Z: approx. 9000mm/3000mm/3000mm, weight: approx. 10000kg, control system: PLC. Documentation available. An on-site inspection is possible. Nodpex Sywgjfx Ahvowc

Condition: ready for operation (used), Year of construction: 2016, A screw press for dewatering purposes is available. Screw diameter: 400mm, residual moisture range: 35%-45%, throughput range: 1t-4t/h, weight: approx. 4400kg. Documentation available. An on-site inspection is possible. Nwedpfx Asxvruvshvjc

Condition: ready for operation (used), Year of construction: 1988, A complete beer keg cleaning and filling system Leifeld + Lemke, today IW-Anlagentechnik, is available. Throughput capacity: approx. 120kegs/h, keg/barrel formats: 20l/30l/50l, control system: Siemens S7, control system retrofit: 2008. 1) Keg exterior cleaning machine Schöttiger + Schäfer KHAH 240, max. cleaning capacity: 240kegs/h, operating cleaning capacity: 140kegs/h, drive rollers: 2, transfer rollers infeed/outfeed: 1/1. 2) Keg pre-cleaning machine Leifeld + Lemke KVR 300, year of manufacture: 1988, max. washing capacity: 180kegs/h, operating washing capacity: 120kegs/h, design: stainless steel, process: centering, residual emptying with air purging, mixed water pre-cleaning, waiting and soaking station, caustic cleaning and pre-filling. 3) Keg main cleaning and filling machine Leifeld + Lemke KFR 401, year of manufacture: 1988, filling line capacity: 60kegs/h, design: stainless steel, process: centering, internal cleaning station, 2x sterilization stations, filling process preparation, filling station, waiting station. 4) CIP cleaning station for kegs, max. cleaning capacity: 180kegs/h, cleaning agent tanks: 5, tank volume: 650l, tank contents: caustic 1/caustic 2/acid/hot water/mixed water. Furthermore, the system includes the complete pallet conveyor, keg conveyor and a Kuka robot for depalletizing and palletizing of the kegs. Documentation available. On-site inspection is possible. Nwsdoycigkspfx Ahvsc

Year of construction: 1994, condition: ready for operation (used), A small compressor system including separator, dryer and tank is available. 1) Compressed air receiver MetaCon, year of manufacture: 1994, nominal volume: 1000l, operating temperature range: -10°C/50°C, max. operating overpressure: 11bar. 2) Compressor Atlas Copco GA 18, year of manufacture: 1994, air volume flow: 36.4l/s, max. operating pressure: 10bar, motor power: 18.5kW, speed: 1500rpm. 3) Air dryer Schneider Druckluft GmbH DK 3000 N, max. inlet temperature: 50°C, max. operating pressure: 16bar, refrigerant: R134a, refrigerant charge: 700g, operating overpressure: 17bar. 4) Oil-water separator Donaldson Ultrasep Plus 30, max. residual oil content: 10mg/l, max. compressor capacity: 30m³/min, oil adsorption capacity: 25l, machine dimensions X/Y/Z: approx. 900mm/1000mm/400mm, weight: approx. 70kg. An on-site inspection is possible. Nodpfxsx Ih D Ts Ahvewc

Year of construction: 2007, condition: ready for operation (used), A complete bottle filling, sterilizing, capping, labelling, cartoning and palletizing line for the wine industry is available. Bottle filling capacity: 4000 bottles/h, bottle format sets: 1l and 0.75l Schlegel/Bordeaux/Bugunder/0.5l/0.25l, sterilizer capacity: 4000 bottles/h, capper capacity: 8000 bottles/h, labelling capacity: 10000 bottles/h, capping capacity: 10000 bottles/h, carton formats: 12 and 6-bottle crates/12 and 6-bottle cartons, palletizing capacity: 1000 cartons/h. Line components: 1) Normpack Compact Form CF 670/980 carton folding machine, year of manufacture: 2000, output: approx. 650 cartons/h, 2) Stork VV-24 L.W. bottle filling machine, Year of manufacture: 1977, 3) Silmo ST XII/110 v ozone immersion bath sterilizer, year of manufacture: 1983, bottle formats: all standard wine bottles, 4) Miho LC 2000 caustic tester, year of manufacture: 2003, 5) Kapsler Robino & Galandrino Monoblocco Fenix 3, year of manufacture: 2002, 6) Syscona Unicount closure checker with counter for cork and metal closures, 7) Garnep Lebetta 4/3/18 1320 labeller, year of manufacture: 2017, including 2x wet gluing units, 3x SK units, camera system for rough alignment of bottles and domino laser for imprints, 8) Adelski PP2004 Longcap automatic capping machine, year of manufacture: 2007, 9) Adelski MCA PV 6541/1/210 AVM2104 automatic capping machine, year of manufacture: 1999, 10) Corker Bertolaso Delta, year of manufacture: 1977, 11) Carton sealing machine Normpack NCF-047, year of manufacture: 2001, including hot melt gluing unit, 12) Packaging machine Kettner Robot Junior Packer BE 2-T, year of manufacture: 1992, 13) Pallet loading machine Kettner Pressant Universal 1200, year of manufacture: 1992, 14) Crate labeling machine Weber Legi-Air 40XX, year of manufacture: 2004, 15) Dryer Okema T3, year of manufacture: 1999, 16) Carton printing machine Blum CompactLine 3. 0, number of heads: 8, printing options: double-sided, 17) Silmo 40g ozone generator, year of manufacture: 1983, 18) Schaberger glass lifting machine, year of manufacture: 1977, including new glass head, 12-bottle crate head and bottle table. Documentation available. On-site inspection is possible. Nsdpfjvur Htsx Ahvswc

Condition: used, mileage: 208,110 km, power: 390 kW (530.25 HP), first registration: 09/2019, fuel type: diesel, empty load weight: 13,700 kg, maximum load weight: 12,300 kg, overall weight: 26,000 kg, axle configuration: 6x4, wheelbase: 3,300 mm, brakes: retarder, color: orange, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, cruise control, differential lock, electronic stability program (ESP), fog lights, onboard computer, parking heater, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden, ClassicSpace cab, Mercedes PowerShift 3, company property, 1x comfort seat, 1x bunk, seat heating, rear window, electric mirrors, heated mirrors, left electric window, right electric window, air conditioning, sun visor, cruise control, auxiliary heater, air horn, ABS (anti-lock braking system), traction control (ASR), retarder, PTO, differential lock, fog lights, work lights, leaf suspension, trailer coupling with air and electric connections, aluminum fuel tank, container lock, underrun protection, rear stabilizer, roof hatch, remote control, green environmental badge. Wheelbase: 3300 mm Body: Palfinger tele skip-loader system with remote control, 8 t front axle, rear axle: planetary gear 13.4 t with 300 mm crown wheel, electronic braking system with ABS and ASR (ABS can be deactivated), disc brakes with full protection front and rear, secondary water retarder, condensate monitoring for compressed air system, front axle stabilizer, smoker's package, lower bunk, residual heat utilization, additional hot water heater, construction site filter, PSM, ClassicSpace, comfort locking system, offroad driving program, Mercedes PowerShift 3, multimedia touch radio, pre-installation for toll recording, LED daytime running lights, high-performance engine brake, protection plate under bumper, transmission oil cooling, Grounder, refrigerator, MB 124-10c MPA PTO normal/economy speed. ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors! Njdpfx Ahsx I I Dajvowc

Condition: excellent (used), functionality: fully functional, mileage: 745,880 km, power: 330 kW (448.67 HP), first registration: 10/2017, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 4x2, wheelbase: 4,220 mm, fuel: diesel, brakes: retarder, color: blue, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of beds: 2, Equipment: ABS, AdBlue, Bluetooth, EBS, USB port, air conditioning, blind spot assist, central locking, cruise control, differential lock, electric window regulation, electronic stability program (ESP), fog lights, fridge, full service history, hill-start assist, lane keeping assist, navigation system, onboard computer, parking air conditioner, parking heater, power assisted steering, power mirror, retarder, seat heater, second fuel tank, soot filter, spoiler, tachograph, tire pressure monitoring, traction control, Mercedes-Benz Actros 1845 LS GigaSpace Standard Tractor Unit Engine OM471, inline 6-cylinder, 12.8 L, 330 kW (449 hp), 2200 Nm Euro VI C (6) Mercedes PowerShift 3 automated transmission Retarder Leaf/air suspension Differential lock ABS/EBS/ASR Bi-xenon headlights Electronic Stability Program (ESP) Radio/navigation system with Bluetooth, comfort version Lane Keeping Assist Adaptive Cruise Control (ACC) Proximity Control Assist (ACC) Attention Assist Active Brake Assist 4 Turning Assist Automatic climate control Parking air conditioning Auxiliary hot water heater, cab residual heat utilization Driver airbag 2x beds/sleeping bunks Refrigerator Safety Pack Classic Climate Pack L-cab GigaSpace, 2.50 m, flat floor Rain/light sensor Nwsdpeyh Ezxjfx Ahvec Wheelbase 3700 mm Full side skirts ALCOA Dura-Bright rims Fuel tank 570 l, left, 650 x 700 x 1450 mm, aluminum Fuel tank 430 l, right, 650 x 700 x 1100 mm, aluminum AdBlue tank 60 l, left Tyres: | 1st axle 385/55 R22.5 tread depth 10mm | 2nd axle 315/70 R22.5 tread depth 11mm

Condition: new, Year of construction: 2025, Air table Resopal Left 100 x 100 cm Right 100 x 100 cm Air corners Wide cover plate (standard), narrow cover plate (40 mm) incl. control Technical data: Cutting width: 1,150 mm Insertion depth: 1,150 mm Maximum insertion height: 165 mm Safety pressure: 30 daN Pressure (min): 150 daN Pressure (max): 4,500 daN Saddle speed (return): up to 300 mm/s Knife speed: 45 cycles/min Residual cut (automatic, without cover plate): 25 mm Residual cut (automatic, with cover plate): 95 mm Display: 18.5" capacitive touchscreen Automatic programming: graphical, with intuitive user interface Nodow Dp N Nepfx Ahvjwc Positioning accuracy: 1/100 mm thanks to DPS system Knife change: fast and precise with OptiKnife system Available at short notice

Condition: used, mileage: 473,765 km, power: 310 kW (421.48 HP), first registration: 05/2012, fuel type: diesel, empty load weight: 9,580 kg, maximum load weight: 16,420 kg, overall weight: 26,000 kg, tire size: 315/70R22.5, axle configuration: 6x2, wheelbase: 4,600 mm, next inspection (TÜV): 08/2026, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: air, number of seats: 3, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, cruise control, differential lock, fog lights, onboard computer, parking heater, power assisted steering, seat heater, spoiler, traction control, trailer coupling, Vehicle location: Bovenden, StreamSpace, Active Brake Assist, Economy Pack Basic, Mercedes PowerShift 3, Large cab, 1x comfort seat, double passenger bench, 2x bunk, heated seat, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, cruise control, electric sunroof, auxiliary heater, air horn, ABS (anti-lock braking system), traction control (ASR), retarder, roof spoiler, lift/lower function, differential lock, fog lights, work lights, air suspension, trailer hitch with air and power, 2x aluminum fuel tanks, last axle liftable, underrun protection, side aluminum underrun protection, green emission sticker. Nwedpfjx Hx N Dsx Ahvjc Wheelbase: 4,600 mm. Body: BDF swap chassis SAXAS MWX 74-S for 7.15m to 7.45m swap containers. Driving school equipment. Front axle air-suspended, 8t front axle, rear axle with 440 hypoid gear set 13t, 7.5t trailing axle unloadable & liftable, electronic brake system with ABS and ASR, disc brakes front and rear, secondary water retarder, condensation monitoring for compressed air system, front underrun protection made of aluminum, additional stabilizer for rear/trailing axle, ambient lighting, comfort beds upper and lower, residual heat utilization, additional thermal insulation, auxiliary hot water heating, electric lift roof, hill start assist, communication interface (KOM), illuminated Mercedes star, StreamSpace, comfort central locking, rain/light sensor, Economy drive program, Mercedes PowerShift 3, pre-equipment for toll collection, tank capacity: 2x 630 l, LED daytime running lights, cornering light, ESP, roll stability assist, lane keeping assist, distance assist, driver attention assist, Active Brake Assist 2, tire pressure monitoring, driver's airbag, refrigerator, Comfort Pack Classic, Safety Pack Top, Economy Pack Basic. ACCESSORY INFORMATION WITHOUT WARRANTY. Subject to changes, prior sale, and errors!

Condition: used, Year of construction: 2014, with jointing cutter aggregate including DIA tools Jointing thickness up to 40 mm, workpiece thickness up to 3 mm Combination milling station with R 2.5 mm radius Technical description: - Hot-melt glue application to the workpiece for edge material up to 3 mm - 60 mm workpiece thickness without jointing aggregate, 40 mm workpiece thickness with jointing aggregate - Maintenance-free, coated glue pot - HF end-trimming station (16,000 rpm) for front and rear edge overhang - HF milling station (16,000 rpm) with interchangeable insert cutter (combination design) and fine adjustment of the cutter from the operator side - Spare spaces for additional processing aggregates (Hebrock system) - Feed rate approx. 10 m/min - Adjustable cut depth for the end trimming saw - Signal lamp for workpiece sequence - Robust chain drive - Ergonomically arranged control panel - Double roller top pressure beam - Aggregate view windows from machine rear and operator side - PLC control including touchscreen Technical data: - Feed rate 10 m/min - Panel thicknesses from 8 - 40 mm - Weight: depending on configuration, approx. 1400 kg - Dimensions (L x W x H): 5000 x 1445 x 1600 mm Airtronic for machines up to 8 mm edge thickness, 1 unit Technical data: - Edge thickness from 1.2 mm – 3.0 mm possible - Maximum panel thickness 25 mm - Feed speed 7 – 10 m/min depending on edge material - Ready for operation in 3 min - Air consumption approx. 800 l/min for the entire machine - Power supply up to 32 A / 16 kW for the entire machine, higher power connection required for machines with grooving saw - Extraction as previously - PLC control is mandatory Upgrade to 8 mm edge thickness, 1 unit (up to max. 40 mm workpiece thickness) Including pneumatic saw adjustment Separate pneumatic cutter adjustment, 1 unit, controllable from the operator panel (straight/radius) Buffing station (polishing mop), 1 unit Corner rounding cutter, 1 unit, including combination tool and pneumatic adjustment for chamfer/radius Maximum workpiece thickness: 40 mm Minimum workpiece length: 300 mm Radius R 2.0 mm Radius scraper, 1 unit, including pneumatic lift device, Radius R 2.0 mm Flat scraper, 1 unit, with pneumatic insertion control Glue station quick-change system in preparation, 1 unit, without second glue pot, including the ability to process PU adhesive with the machine, without glue discharge system underneath Special cleaning system for PU glue discharge underneath, 1 unit 60 mm panel thickness for machines with jointing, 1 unit; maximum workpiece thickness with jointing aggregate: 60 mm; jointing thickness: 40 – 60 mm; workpiece thickness up to 2 mm Special infeed fence for overloaded panels, 1 unit (16 mm and 19 mm thickness), maximum laminate overhang: 8 mm Separate extraction for jointing aggregate, 1 unit, directly at jointing cutter vertically upward, d=80 mm for optimal extraction performance, strongly recommended from AKV 3005 DK-F onwards Ball bearing for corner rounding cutter, 24.1 mm, 1 unit Ball bearing for corner rounding cutter, 24.2 mm, 1 unit Nesting for the combination milling aggregate, 1 unit, for processing workpieces with cup hinge borings (bottom side only) Nesting for the radius scraper aggregate, 1 unit, for processing workpieces with cup hinge borings (bottom side only) Release agent sprayer, 1 unit Cleaning agent sprayer, 1 unit, to facilitate removal of glue residue Nwodpfx Aheyfp N Dovsc Antistatic spray device, 1 unit, mandatory for airtronic; antistatic coolant is sprayed onto the in

Condition: new, power: 294 kW (399.73 HP), axle configuration: 4x2, color: green, driver cabin: day cab, gearing type: automatic, suspension: air, Equipment: ABS, EBS, air conditioning, For inquiries regarding the vehicle, Mr. Seidel will be pleased to assist you by telephone. Iveco AD200X40/P HR OFF 4x2 Tipper + Crane Crane: Palfinger PK 12.501 SLD 5, radio remote control, 5th and 6th control circuit for grapple operation, 2-point stabilizers Nwjdpfx Aoyhykbshvec Axle configuration: 4x2, 2 axles, rear axle drive, cab type AD MY, EU emission level, engine: Cursor 9, 400 HP, Euro VI, transmission: 12-speed HiTroniX automated gearbox, HR portal axle drive version, air suspension on rear axle, disc brakes, suited for mixed application, for road and light off-road use, vehicle set-up OFF, wheelbase 3,800 mm, engine speed 2,200 rpm, standard oil dipstick and oil filler on gearbox, steel rims, emission standard EURO VI E, speed limiter 90 km/h, steel bumper, one-piece design (Heavy: three-piece), manually operated cab tilt mechanism, front halogen headlights, fog lights, first aid kit, black exterior cab add-ons, AD MY low roof cab, electrically adjustable and heated exterior mirrors, standard cab roof insulation, electronic immobilizer and second vehicle key, sun blind for driver's side window, rear wall storage with 2 compartments, dashboard: plastic with black trim, EC type approval, 10-inch instrument cluster, manually operated air conditioning, plastic steering wheel, digital EU tachograph 4.1, static passenger seat, air suspension on rear axle, parabolic spring on front axle, alternator 2160 watts (24 volts x 90 amps), rear shock absorbers, 2-cyl. air compressor, 630 ccm, standard total-train brake system, rear/front stabilizer, steel air reservoirs (quantity depending on suspension and trailer version), mechanical battery master switch on chassis right side, batteries: 180 Ah (Heavy) / 170 Ah (Eurocargo), deletion of rear underrun guard, trailer version for use with continuous braking system, fuel tank 290 liters, aluminum, trailer socket for 24V, 15 pin, rear frame overhang 1,848 mm, 4G connectivity box including TCO service contract, radio with Bluetooth, DAB+ and 7-inch display, tire pressure monitoring system (TPMS) with internal sensors, VDI interface for telematics services (FMS) version 4.0, transmission software ECO-Roll (freewheeling function), lane departure warning system (LDWS), driver drowsiness attention warning system, warning triangle (ECE-27 compliant), hill start assist (Hill Holder) for comfortable starts on gradients, reversing camera monitoring system, blind spot monitoring system (BSIS) on right side, intelligent speed assistant (ISA), forward monitoring (MOIS), pneumatic parking brake, pre-wiring for alcohol interlock (ALC), NOISE ECE 51/03, ECAS air suspension with 2 sensors, rocking mode (free rocking mode), auxiliary drive NH/4C for pump, right, manually operated roof hatch, cab with air suspension, headlight protection grilles, transparent exterior sun visor on cab roof, revolving beacon pre-installation, hot water circulation pump suitable as rest-period heater, uses residual engine heat and circulates it through system, pneumatic signal horn behind bumper, luxury air-suspended, heated, multi-adjustable driver's seat, right armrest (not in Eurocargo version), lumbar support and headrest, with...

Condition: used, Year of construction: 1996, Suction nozzle diameter: 160 mm Maximum volumetric flow rate: 1770 m³/h Rated volumetric flow rate: 1448 m³/h Airflow monitoring: differential pressure indicator Vacuum: 1570 Pa Filter area: 10.5 m² Residual dust content: less than 0.2 mg/m³ Sound pressure level: Chip sack volume: Filter cleaning: pneumatic, jet cleaning Motor power: 2.2 kW Machine length: 1600 mm Machine width: 700 mm Nsdpfeyffx Iox Ahvewc Machine height: 2200 mm Weight: