Used Rapid Pk 100 for sale (65)

Condition: good (used), Underfloor sliding table saw, crosscut saw, sliding table saw, miter saw, panel saw, table saw, circular saw, precision circular saw -Manufacturer: Rapid, Table saw, Saw unit: swivels 45° -Type: Pk 100 -Motor power: 2.5 kW / 2850 rpm -Saw blade: Ø 250 mm, (max. Ø 300 mm) -Cutting height 75 mm with saw blade Ø 250 mm (max. approx. 100 mm) Iedpfeyvpm Ssx Akxeia -Cutting width: 350 mm -Miter cut: up to 45° -Dimensions 850/850/H1310 mm -Weight: 176 kg

Condition: used, Year of construction: 1981, functionality: fully functional, Connection rating 380V 3.0kW 6.7A Weight approx. 300 kg Cutting width 900 mm Homemade table extension Sliding table Fixed angle stop at 90° PSV blade guard (homemade) Unit tiltable up to 45° manually Manual height adjustment Extraction port 100 mm Parallel fence missing Machine is fully functional Ijdpjq Au N Ejfx Akxeia

Condition: used, Underfloor circular saw, crosscut saw, pull saw, chop saw, sliding table saw, table saw, circular saw, precision circular saw -Manufacturer: Rapid, table saw saw unit: 45° pivotable -Type: Pk 100 -Motor power: 2.5 kW / 2850 rpm -Saw blade: Ø 175 mm, (max. Ø 300 mm) -Cutting height 37 mm with saw blade Ø 175 mm (max. ca. 100 mm) Iiodpjm Sk H Ijfx Akxea -Cutting width: 350 mm -Miter cut: up to 45° -Dimensions 940/860/H1390 mm -Weight: 162 kg

Condition: good (used), Underfloor circular saw, crosscut saw, pull saw, chop saw, sliding table saw, table saw, circular saw, precision circular saw -Manufacturer: Rapid, table saw saw unit: 45° pivotable -Type: Pk 100 -Motor power: 2.5 kW / 2850 rpm -Saw blade: Ø 250 mm, (max. Ø 300 mm) Isdpfxjm Sk Hys Akxoia -Cutting height: 70 mm (max. ca. 100 mm) -Cutting width: 345 mm -Miter cut: up to 45° -Chip extraction: with gate valve for connection to a central extraction system -Dimensions 1020/850/H1300 mm -Weight: 188 kg

Condition: used, machine/vehicle number: 14018, Rotor diameter: 500 mm Rotor width: 1000 mm Rotor knives: 5 x 2 Iodpfx Aeyr Tygekxoia Stator knives: 2 rows Infeed opening approx. 600 x 1000 mm Drive motor: 45 kW

Year of construction: 1977, condition: ready for operation (used), A Rapid heavy-duty granulator is available. Only unreinforced polyolefins were ground with the mill, so it was not subjected to any load. Flour chamber opening X/Y: 1050mm/600mm, motor power: 75kW, rotor knives: 2x5, stator knives: 2, sieve: 8mm, throughput: depending on material. Machine dimensions X/Y/Z: approx. 2750mm/2100mm/2850mm, machine weight: approx. 4550kg. Documentation available. On-site inspection is possible. Iisdovwcxfjpfx Akxea

Condition: used, Year of construction: 2016, weight max. in kg 1000 kg fork length 1150 mm stroke height 800 mm weight of the machine ca. 145 kg Electric scissor lift pallet truck from Rapid Type: REE.1000 Year of manufacture: 2016 Condition: used, in working order Iiedpfx Aksu S R Dmexsa Note: without charging station and without battery!

Condition: excellent (used), CATALOG NO. 6631 TECHNICAL DATA - Loading hopper opening: 285x305mm - Motor: 7.35 kW - Number of knives: 3 pcs + 2 counter knives - Knife size: 300x75mm - Screen (2 types): 10mm, 8mm - Extraction nozzle diameter: 100mm - Dimensions (L/W/H): 1070x900x1980mm - Weight: 613kg ADVANTAGES – Swedish production – Additional screen included – Very good condition – Used chipper Ijdpfx Asy Drh Iekxeia Net price: 22,900 PLN Net price: 5,450 EUR Net price calculated at 4.2 PLN/EUR (In case of significant exchange rate fluctuations, price may change)

Condition: used, Year of construction: 1986, total length: 1,900 mm, total height: 2,420 mm, total width: 1,700 mm, Empty weight: 2.000 kg - Year: 1986 - Documentation available: No - CE certificate present: No - Serial number: 70.144 - Main motor power [kW]: 45 - Rotation speed [rpm]: 1470 - Rotor width [mm]: 780 - Number of shafts [pcs.]: 1 - Opening width [mm]: 440 - Opening length [mm]: 6500 - Sieve perforation [mm]: 7 - Number of fixed knives [pcs.]: 10 - Transport dimensions: 1900mm x 1700mm x 2420mm (l x w x h) - Transport weight [kg]: 2000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Isdpfsy Dthvex Akxsia Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: used, machine/vehicle number: 14037, Rotor diameter: 260 mm Rotor width: 450 mm Rotor knives: 3 Ijdjyr Ty Tjpfx Akxjia Stator knives: 2 Infeed opening approx. 440×400 mm Drive motor: approx. 11 kW

Condition: used, machine/vehicle number: 12047, Rotor diameter: 260 mm Rotor width: 300 mm Rotor blades: 3 Stator blades: 2 Inlet cross-section approx. 260 x 300 mm Drive motor: 7.5 kW Iodpjyr Tvhsfx Akxoia

Condition: used, machine/vehicle number: 12916, Rotor diameter: 350 mm Rotor width: 450 mm Rotor blades: 3 Stator blades: 2 Iodsyr Trpspfx Akxoia Inlet cross-section approx. 350 x 450 mm Drive motor: 18.5 kW

Condition: used, machine/vehicle number: 12258, Rotor diameter: 350 mm Rotor width: 450 mm Iijdpfxeyr Tn Dj Akxoa 3-blade rotor 2 rows of stator blades Inlet cross-section approx. 350 x 450 mm Drive motor: 18.5 kW

Condition: used, machine/vehicle number: 11666, Rotor diameter: 280 mm Isdjyr Tmmopfx Akxoia Rotor width: 300 mm 3 blade rotors 2 rows of stator blades Inlet cross-section approx. 300 x 280 mm Drive motor 11 kW With noise protection box, noise protection hopper, and exhaust fan

Condition: used, machine/vehicle number: 30432, operating hours: 4,378 h, load capacity: 4,900 kg, empty load weight: 5,490 kg, This Carer Rapid electric forklift, model: R49-NCS, is being auctioned online as part of our industrial auction / machinery auction due to the site closure of ContiTech Transportsysteme. Iiedpfxsyz Sy Se Akxoa

Year of construction: 2017, condition: used, Pneumatic material feed Travel length: 800 mm (multi-stroke possible, max. 2,400 mm) Max. saw blade diameter: 500 mm Iiedpfx Akokrgiusxja Cuts between 45° and 90° possible Saw blade RPM: 2850 revolutions per minute. Continuously adjustable saw feed Minimum quantity spray device Piece counter with shut-off automatic Weight: 600 kg

Year of construction: 2004, condition: excellent (used), Mill Rapid 1528, 2.2 kW, inlet 38 x 42 cm, height 173 cm, 12 knives, 2 pastry boards, 2002, 2004. Iijdpfx Aeyzmw Eekxsa

Condition: ready for operation (used), functionality: fully functional, RAPID Machinery Generation III automatic hot foil stamping machine, designed for industrial printing and packaging applications. The machine features two heated stamping heads, digital temperature control and continuously adjustable speed. Heavy-duty construction ensures stable and reliable production. Technical Specifications: • Manufacturer: RAPID Machinery Co. (Sydney, Australia) • Machine type: Automatic hot foil stamping machine • Series: Generation III • Number of stamping heads: 2 heads • Head positioning: adjustable left / right • Maximum stamping width: approx. 300–350 mm • Maximum material thickness: approx. 0.1 – 1.5 mm • Processable materials: paper, cardboard, plastic substrates • Temperature range: approx. 80 – 200 °C • Temperature control: independent digital control per head • Operating speed: continuously adjustable • Operating modes: automatic / single pull Iijdpfjyghr Hox Akxoa • Counter system: digital batch counter • Drive system: electric • Power supply: 3-phase, 400 V, 50 Hz (typ.) • Safety equipment: emergency stop, CE-compliant safety system • Frame construction: heavy-duty industrial steel frame • Country of manufacture: Australia

Condition: excellent (used), Screening and sorting machine for bulk materials or small metal components. Very good condition – complete, equipped with original drive, control cabinet, and a set of calibration screens. • Manufacturer: SCHWANOG Günter KG, Villingen / Schwarzwald • Model: RAPID SBM 63G • Year of manufacture: 1972 • Drive: Bauknecht motor 0.55 kW, 380/220 V, 2850 rpm • Control cabinet: Carl Kurt Walther GmbH, Wuppertal • Robust steel construction, stable frame with transport wheels • Power supply: three-phase 400 V • Complete set of screening sieves in wooden frames (numbers 1–6) • Sieve mesh range: from 2 mm to 15 mm • Adjustable and exchangeable screens • Main switch, start/stop controls, and overload protection • Very good condition – dismantled from the plant, mechanically fully functional The machine is ready for operation after a basic inspection. Ideal for: metalworking shops, foundries, industrial laboratories, sorting granulates, sand, or components. Iiedpfx Akoxmt Eqoxea

Condition: used, Double Mitre Saw RAPID Type DGL 5000 / 500 Iedjyxy S Dopfx Akxsia In need of repair - control unit non-functional Year of manufacture: 1993 Cutting length: 5000 mm Shortest cut length: 350 mm Saw blade diameter: 500 mm - Control unit non-functional Space requirement (L x W x H): 7200 x 1700 x 1850 mm Weight: 1250 kg We are making space Affordable machine – ideal for export

Year of construction: 1993, condition: excellent (used), Extraction system for aluminium and PVC swarf Iiodped Rx H Esfx Akxea Dimension: 800x1000x2370

Year of construction: 1992, condition: used, machine/vehicle number: 7375, cutting length: 5000 mm disk of circular saw-Ø: je nach Bedarf 420 - 500 mm Iodpjz E Snjfx Akxsia space needed: 6400 x 1400 x 1700 mm weight: ca. 1600 kg

Year of construction: 1992, condition: good (used), functionality: fully functional, Manufacturer: Rapid Type: 1415 Grinding chamber dimensions: 150 x 140 mm Power: 1.5 kW Iijdpfx Aoyyp Uqokxoa New knives

Condition: defective spare-parts repository (used), functionality: unexamined, Machine is not overhauled! Ijdeu Ivrqopfx Akxsia With table extension

Condition: used, Aluminium saw with a cutting length of up to 600 mm with hydro-pneumatic feed Adjustable angle between 45° and 90° Pneumatic material clamps suction Max. saw blade diameter: 500 mm Very good condition Iedpfx Aet Nay Hokxjia