Used Radial for sale (872)

Condition: excellent (used), Caser radial drill mod. F50-1250 complete with cube Bsdov Hngmepfx Aafocu

Condition: good (used), MAS VR8A Arm 2500 mm MC 6 Bcodpfoxx Dapjx Aafeu 10,000 kg

Condition: good (used), 12 speeds 44–1500 rpm. TAI PIIN TPR-1100. MODEL: 1100 Year of manufacture: 1994-11 Drilling capacity in steel: approx. 40 mm Drilling capacity in cast iron: approx. 55 mm Tapping capacity: steel approx. M25, cast iron approx. M38 Arm length: 1100 mm Travel over slide arm: approx. 900 mm Spindle taper: Morse taper MT4 Spindle speed: 44–1500 rpm, 12 steps Automatic feed: 0.05 / 0.09 / 0.15 mm/rev (3 steps) Spindle stroke (quill travel): 250 mm Column diameter: approx. 260 mm Box table: approx. 635 × 520 × 415 mm Base dimensions: 1725 × 715 × 180 mm Max. machine height: approx. 2530 mm Bcsdpfx Aaoxxv Raofju Spindle motor power: approx. 2.2 kW (3 hp), 2-speed motor Transport dimensions: Height: 2000 mm x Width: 720 mm x Length: 1750 mm Weight: 1850 kg

Condition: used, Year of construction: 1990, Radial Drilling Machine Z3050 x 16 I Spindle: Ø 80 mm Spindle exit: 300 mm Spindle speed: from 25 to 2000 RPM Arm travel: 1600 mm Year of construction: 1990 Column diameter: Ø 320 mm Maxi distance spindle nose/table: 1800 mm Bcjdpfx Aaexxax Uofeu Mini distance spindle nose/table: 1200 mm Table useful dimensions: 1700 x 1000 mm Tailstock CM5 Hydraulic clamping trolley + arm + column Auto advance non-functional Lubricant pump Voltage: 380 V Dimensions (L x W x H): 2400 x 1200 x 3200 mm Weight: approx 4 T

Condition: repair required (used), Year of construction: 2013, operating hours: 50,000 h, functionality: limited functionality, overall weight: 19,200 kg, fuel type: electric, color: blue, V2002A VAPOUR RADİAL FAN Production: PİLLER Year of manufacture: 2013 Power: 560kW, 560A, 690 VOLT VFD ACS 800,ABB electric motor RPM: 3806 Dıscharge pressure saturated :1825 mbar Mass flow vapour: approx. 26130 kg/hour Suction side:DN400 Pressing side: DN400 Impeller diameter: 1410 mm, Impeller material: Duplex 1.4462 Overall dimensions: Height 2250 x width:1250 x length:3450mm Net weight with engine: approx. 6.5 t SKF Block bearing : 1036019-09 (squeeze oil damper) V2002B VAPOUR RADİAL FAN Production: PİLLER Year of manufacture: 2013 Power: 630kW, 630A, 690 VOLT VFD ACS 800, ABB electric motor RPM: 3806 Dıscharge pressure saturated:2371 mbar Mass flow vapour: approx. 26710 kg/hour Suction side:DN400 Pressing side: DN400 Impeller diameter: 1410 mm, Impeller material: Duplex 1.4462 Overall dimensions: Height 2250 x width:1250 x length:3615mm Net weight with engine: approx. 7.2 t SKF Block bearing : 1036019-09 (squeeze oil damper) Bcsdpfoxwyaiox Aafeu V2002C VAPOUR RADİAL FAN Production: PİLLER Year of manufacture: 2013 Power: 500kW, 500A, 690 VOLT VFD ACS 800, ABB electric motor RPM: 3806 Dıscharge pressure saturated:2900 mbar Mass flow vapour : approx. 27278 kg/hour Suction side:DN400 Pressing side: DN400 Impeller diameter: 1260 mm, Impeller material: Duplex 1.4462 Overall dimensions: Height 2250 x width:1250 x length:3491mm Net weight with engine: approx. 5.5 t SKF Block bearing : 1036019-09 (squeeze oil damper) Microcracks on casings and on impeller B. Air cooling of M3BP 355LKB2 IMB3/IM1003 ( 560 kW ) motor is improved with a higher capacity cooler. Old one is also available.

Condition: new, Drilling capacity cast iron / steel ----- 31.5 / 25 mm Tapping capacity cast iron / steel ----- 20 / 16 mm Speed range ----- (8) 100 ~ 1600 rpm Spindle stroke ----- 135 mm Unload ----- 300 ~ 720 mm Spindle intake ----- MK3 Spindle feed ----- 0.08 / 0.14 / 0.22 mm/omw Cube table----- 250 x 250 x 250 mm Column diameter ----- 150 mm Bjdpfx Asq E Izmeafocu Foot ----- 1200 x 620 mm Maximum distance spindle - base ----- 275 ~ 680 mm Motor ----- 1.1 KW Voltage ----- 400V / 3 Phase Weight ----- 580 KG INCLUDING * Cooling system * CE plug * SCHNEIDER electrics OPTION * Floor cabinet

Condition: ready for operation (used), functionality: fully functional, feed length X-axis: 1,015 mm, feed length Y-axis: 600 mm, drilling capacity: 40 mm, spindle speed (max.): 2,000 rpm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Bcsdpfx Aexwcyfsafou Drill holder mount: MK 4 Drilling capacity: 40 mm Table size: 1,445 mm x 810 mm X-axis: 1,015 mm Y-axis: 600 mm Spindle speed: 2,000 rpm MACHINE DETAILS Space required (LxWxH): 0.82 m x 2.01 m x 2.5 m Machine weight: 2,815 kg

Condition: good (used), Year of construction: 2013, machine/vehicle number: 157098, Offer 25404 Technical Data: - Drilling capacity in steel ST 60: 32 mm - Boring capacity (enlarging): 40 mm - Drill spindle taper: MT 4 - Drill spindle stroke: 250 mm - Arm reach min / max: 200 / 1000 mm Bcedpfx Aasxvzx Dsfou - Arm vertical travel: 600 mm - Min / max distance spindle - base plate: approx. 550 - 1060 mm - Machined base plate clamping area: W 700 - 800 mm - Spindle speeds: 71 - 1800 rpm - 4 feeds: 0.13 - 0.54 mm/rev - Drill spindle drive: 400 V / 2.2 kW - Cube table - Coolant system - Space requirement approx.: W 750 x H 2350 x D 1750 mm - Weight approx.: 1300 kg

Condition: good (used), Maximum drilling diameter in steel 50 mm Minimum overhang (minimum distance of the spindle axis from the body) 450 mm Maximum overhang (max. distance of spindle axis from the body) 1600 mm Minimum spindle speed 20 1/min Bcodpfx Aettriweafju Maximum spindle speed 2000 1/min

Condition: used, Year of construction: 1987, Work table 750mm x 1200mm Arm travel 800mm Tool holder MK 3 Drilling capacity 28mm in steel Thread cutting device Coolant system Documentation Bjdpfx Aaoxpfhvofocu

Condition: used, Year of construction: 1991, Work table 600mm x 1200mm Column travel 600mm Tool holder MK 3 Drilling capacity 28mm in steel Tapping device Coolant system Bcodpfxoxpfglj Aafju Documentation

Condition: ready for operation (used), Year of construction: 1989, functionality: fully functional, throat depth: 2,005 mm, drilling capacity: 55 mm, spindle speed (max.): 1,200 rpm, column diameter: 360 mm, stroke length: 855 mm, TECHNICAL DETAILS Drilling capacity in steel (diameter): 55 mm Boring capacity: 80 mm Thread cutting: approx. M40 Arm reach min.: 320 mm Arm reach max.: 2,005 mm Column diameter: 360 mm Boom travel: 855 mm Clamping surface: 1,000 mm - 1,700 mm Automatic feeds: 0.06 - 1.00 mm/rev Bcedpfxsxn Nbdo Aafeu Spindle speed: 30 - 1,200 rpm Spindle taper: MT 5 Drive power – spindle motor: 400 V / 5.5 kW Quill stroke: 240 mm Spindle to base plate: 1,000 mm - 1,700 mm MACHINE DETAILS Dimensions & Weight Dimensions: 2.99 m x 1.12 m x 2.85 m Machine weight approx.: 4,800 kg EQUIPMENT Electric central clamping Box table Hydraulic vice Coolant device

Condition: like new (used), Year of construction: 2021, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Machine design • Work table 1800 x 600 mm with 4T-slots • Boom travel 1050 mm • Drill spindle SK 40 with tool clamping device • Stepless speed programming • Stepless spindle feed via three-phase servo motor • 2 T-slots 18 mm on the machine base frame at the back • 2 T-slots 18 mm on the machine base frame on the left • Thread cutting device • Central lubrication • Coolant device • Machine light • CE marking • Safety device • USB interface Dimensions and travel paths Tool holder SK 40 Column diameter mm 195 Table dimensions mm 1800 x 600 Number of T-slots 4 Distance between T-slots mm 125 Spindle stroke (Z axis) mm 200 Column stroke (W axis) mm 410 Distance from lower edge of spindle - min mm 70 Top edge of table max. mm 680 Distance from bottom edge of spindle - min mm 970 Floor max. mm 1580 Drilling radius mm 540 - 1590 Work table height mm 900 Cutting values Drilling performance into solid material St 60  40 GG 22  50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 – 2000 Feed drives X-axis - AC - servo motor kW 0.25 Y-axis - AC - servo motor kW 0.25 Z-axis - AC - servo motor kW 4.50 W-axis - AC - servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (W): m/min. 3 Feeds continuously variable mm/min 5 – 2000 Accuracy Positioning accuracy X, Y axis to 1200 mm mm ± 0.075 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Hydraulic unit for clamping kW 0.75 Total connected load kVA 13.0 Weight Danumeric 440 (without packaging) with table 1800 x 600 mm kg 2800 CNC control Axes: 4 (X, Y, Z, W), expandable Processor: 32-bit CPU Screen: TFT flat screen backlit, easy to read from all sides, 215 x 160 mm Position information: Cartesian or polar, absolute or incremental dimensions, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, material-dependent cutting data suggestions Bcjdexn A Spopfx Aafsu Tool management: max. 500 tools Sub-program technology: yes Machining cycles Standard software options: programming in dialog, 38 zero point shifts, turning and mirroring, teach-in for X, Y, Z, restart in the program with optional functions for targeted entry Zero point determination: cycles for determining zero points by manually probing the workpiece for: - any rectangular parts clamped - any round parts clamped - transfer of cast and burnt parts - angular position detection for round parts by probing reference edges or surfaces Test graphics Graphic display of drilling patterns Data interfaces USB

Condition: ready for operation (used), Ventilator Radial Brand: Radial Driving: 19 kW Bsdpfx Aajv Swqfsfjcu

Condition: new, Year of construction: 2013, shaft A2 changeable with CALZONI MR 1800 / N5 inclusive flange FL 4 D75 ( connection tubes) ( 2 pieces available) REPARATION SET FOR RADIAL PISTON MOTOR IAM1800 / C model 2013 - new consisting of: 1 x rotary distributor 1 x distributor plate 1 x bearing wave 1 1 x bearing wave 2 Bcedpfx Aajhpihzsfsu 1 x seal kit (2 pieces available) jöma price: € 700,- / 1 set

Condition: used, Radial Drilling Machine BERGONZI type UT 25 Spindle: CM3 Spindle exit: 150 mm Spindle speed: from 130 to 900 RPM Arm travel: 500 mm Max height table/spindle nose: 900 mm Column: Ø 180 mm 2 speeds motor Auto descent Return Spring defective Electric arm rise Delivered with: 1 cube Length 500 mm x Depth 400 mm x Height 450 mm 1 false table Lubricant pump Voltage: 380 V Length: 1500 mm Width: 900 mm Total height in height position: 2300 mm Weight: approx 1,2 T Bsdpsxu Icysfx Aafocu

Condition: used, Radial Drilling Machine SCHLUMBERGER type RF6 Bcodpfjxu Icmox Aafsu Manual raising Cone: CM4 Spindle speed: from 35 to 1800 RPM Table size: 1000 x 650 mm Column slide travel along bed: 750 mm Maxi distance spindle nose/table: 700 mm (in high position) Mini distance spindle nose/table: 250 mm (in low position) Manual up/down of table + column Automatic descent Rotation at 360° on column Hydraulic column locking Drilling / tapping function Lubricant pump Voltage: 380 V Width: 1400 mm Depth: 900 mm Height in low position: 2650 mm Height in high position: 3000 mm Weight: approx 3 T

Condition: used, Radial Drilling Machine SCHLUMBERGER 36-12 Spindle: Ø 110 mm - Right rotation Cone: CM4 Spindle exit: 200 mm Rotation: from 40 to 750 RPM Table size: 1000 x 700 mm Slide travel: 700 mm Automatic descent Recent electrical panel Lubricant pump Voltage: 380 V Back table dimensions: 1200 x 750 mm Bsdoxu Ibpspfx Aafscu Machine support dimensions: 1400 x 1200 mm Total height in height position: 2800 mm Total height in low position: 2550 mm Weight: approx 3,5 T

Condition: used, Radial Drilling Machine OTTO MULLER Spindle: CM4 Spindle speed: from 70 to 1400 RPM Front table size: 1350 x 550 Back table size: 1000 x 400 mm Slide travel: 1000 mm Maxi distance spindle nose/front table: 600 mm Bcedpoxu Iarefx Aafeu Motor: 2 speeds Maxi column rise: 400 mm Auto descent Drilling/tapping function Spindle speed adjustment by belt variation Hydraulic locking Lubricant pump Voltage: 380 V Dimensions in low position: W 1500 x D 2400 x H 2300 mm Weight: approx 2 T

Condition: used, Radial Drilling Machine GSP type 49S22 Spindle: Ø 125 mm Cone: CM6 Spindle exit: 600 mm Spindle speed: from 17 to 1050 RPM Arm travel: 1800 mm Maxi height column travel: 1800 mm Column diameter: Ø 600 mm Total column height: 3000 mm Spindle speed: 11 kW Drilling/tapping function Mechanical locking of the column Hydraulic locking of the trolley Bcsdpjxu H Uujfx Aafou Auto descent Delivered with one cube Cube dimensions: L 800 x W 560 x H 600 mm Table size: L 3300 x W 1400 x H 320 mm Voltage: 380 V Weight: 12 T

Condition: like new (used), Motor power: 3.7 kW (5 HP) Table dimensions: 1200 × 800 mm Cutting angle adjustment: 3 positions Speed: 3000 RPM Voltage: 380 V Bcodpfexup Hmsx Aafsu

Condition: used, Press machine, REMS Power-Press XL ACC, used equipment Manufacturer: Rems Type: Power-Press XL ACC Bjdpfx Aexlp T Ieafscu Pressing range: Ø 10 – 108 mm (up to 110 mm) Pressing force: 32 kN Motor: 450 W universal motor Power supply: 230 V or 110 V, 50–60 Hz Weight: approx. 5.5 kg Dimensions (H x W x D): 800 x 335 x 230 mm Cable length: 2900 mm Accessories: more than 400 types of REMS pressing jaws, adapters for other manufacturers Additional features: Automatic retraction (Automatic Circuit Control – ACC) Rotatable pressing jaw holder with automatic lock Compatible with pressing jaws from other manufacturers Fast pressing, e.g., Geberit Mapress stainless steel Ø 108 mm connection in 15 seconds Press jaws: 76.1; 88.9; 108 mm

Condition: excellent (used), functionality: fully functional, total height: 3,100 mm, drilling capacity: 50 mm, total width: 960 mm, total length: 2,180 mm, spindle speed (max.): 1,500 rpm, spindle speed (min.): 38 rpm, spindle mount: MK 5, overall weight: 3,200 kg, type of input current: three-phase, Heavy radial drilling machine in very good and clean condition, including a large drilling cube and various quick-change tool holders. Bodpsxtf T Tsfx Aafecu

Condition: ready for operation (used), functionality: fully functional, Offered here are several used centrifugal fans, including Siemens electric motors, available in various power ratings and sizes. The fans can be used for either intake or exhaust ventilation. They originate from a kiln system and are therefore heat-resistant. Currently, 5 fans are available for sale. 1x Alko Therm GmbH RZR 15-630 Siemens 1LA2186-4AA60-ZA11 22 kW / 1460 rpm 1x Gebhardt Ventilatoren RZR 11-0560 LG/90 Siemens 1LA7163-4AA60 11 kW / 1460 rpm 1x Alko Therm GmbH RZR 15-710 Siemens 1LA2207-4AA60-ZA11 30 kW / 1465 rpm 1x Alko Therm GmbH RZR 15-710 Bcedpfxoxfzrij Aafsu Siemens - 1x Alko Therm GmbH RZR 15-0630 1x Gebhardt Ventilatoren RZR 11-0560 LG/90 Siemens 1LA7163-4AA60Z 11 kW / 1460 rpm Centrifugal fan, radial blower, radial ventilator

Condition: used, Year of construction: 1984, bore capacity in steel (diameter) 80 mm arm length 2000 mm workpiece height max. ca. 1300 mm Bcsdpoxqrc Njfx Aafsu borehole diameter in Stahl 80 mm borehole diameter in Guss 100 mm threading in St 60 M 68 mm spindle turning speed range 16 - 1250 U/min Spindle Speed 32 Stück spindle bore diameter / taper 110 mm / MK 5 spindle stroke 550 mm number of feeds 18 feed 0,06 - 3,0 mm/U distance spindle/base plate 480 bis 1800 mm column diameter 500 mm spindle drive 11 kW stroke drive 4 kW total power requirement 15 kW weight of the machine ca. 8500 kg base area 3190 x 1250 x 3600 mm with work table 1200 x 1200 x 720 mm, weight approx. 800 kg