RADIAL DRILL

Z3063x20

Condition: reconditioned (used), Year of construction: 1988, functionality: fully functional, This 2A576 radial drilling machine has been completely overhauled and restored to full producbon capacity. Basic technical data: Drilling diameter: in steel 80 mm / in cast iron 100 mm Headstock travel along the arm: 2000 mm Max drilling radius: 2500 mm Spindle travel: 500 mm Spindle: ISO50 Stepless sefng of spindle feed rates Spindle speed range: 2-1600 rpm. Column diameter: 500 mm Main drive engine power: 7.5 kW Dimensions L/W/H: 4180/1280/4125 mm Weight: 12 tons Fpsdpfsur H I Nsx Akvjk This drilling machine meets the minimum safety and health requirements set out in Direcbve 2009/104/EC, known as the "Tools Directive". Machine ready for checking under power in our warehouse in central Poland.

Condition: new, functionality: fully functional, Year of construction: 2026, LOADING, UNLOADING, LOADING DOCK, ACCESS, MOBILE RAMP 15T RAMP, 2M WIDTH TM-GROUP ONE OF THE BEST CHOICE ON THE MARKET ✅ Specification: - Manufacturer: TM-GROUP - Maximum load capacity: 15 tons - Internal ramp width: 2150 cm - Ramp barriers on both sides - Ramp rollers for easy movement - Central handle for moving the ramp with a forklift - Angle and flap height adjustment - Lubricated moving parts - Equipped with a winch - Custom ramp dimensions available for an additional fee - Height adjustment with motor (optional) - ! ATTENTION: ADJUST THE WIDTH OF THE NOZZLE TO THE MINIMUM UTILITY NICHE ! ✅ Raid Lattice: - Galvanized grid with anti-slip grooves. Reliable and safe base. The forklift and pedestrian traffic are guaranteed the best possible grip and solid support. ✅ Handle for a forklift (can be installed on both sides): Fpjdpfx Akemt D Sbevjk - Convenient and quick attachment for a forklift allows the ramp to be transported in all directions. The specially designed handle allows you to maneuver the ramp even in confined spaces. ✅ Additional adjustable or fixed safety supports - Work safety is essential, the ramp is equipped with a support system known from truck semi-trailers. Solid legs guarantee a stable base under the transported load. ✅ Chain to connect to a truck, wagon or fixed storage ramp A solid steel chain is another advantage of our ramp, additionally the protection excludes the possibility of the ramp moving during loading work. ✅ Solid side rails: - Safety barrier with the possibility of unscrewing and installing a frame/roof (the roof is optional) ✅ Electric control of ramp height: - The smooth electro-hydraulic drive uses a high-end 230V pump. ✅ Double sided hand pump: - Hydraulic pump for height adjustment when it is not possible to connect to the electro-hydraulic power supply - two-sided lifting. ⭐️ We offer the following variants: ⭐️ - Driveway widths in 1900 - 2000 cm, 2150 cm and 2500 cm PREMIUM. - Mobile ramps in tonnage of 10 tons, 15 tons and 20 tons and 25 tons PREMIUM. - Thickness of overrun grids 3 - 5 cm. - Colors: red, blue and black. - Mobile ramp with tarpaulin.

Condition: excellent (used), Year of construction: 2009, Brand: Oerlikon / SAF Fedpfslffdyjx Akvepk Model: LP100 Year 2009 Type: Self-aligning/Self-centering Capacity: 100T Diameter range: 2000 to 4500 mm. Turning speed: 100-1200mm/min. Wheel width: 235mm Wheel diameter: 450mm Distance between translation wheels: 1930mm between tabs Translation speed: 4m/min. It has a cable control with buttons for the direction of rotation, speed variator and translation of the turner. Power: Three-phase 380V They have manual and Ce.

Condition: used, Year of construction: 1999, CMA Roby5-EX-R Painting robot, complete. From the supply are excluded the spray gun, the spraying pump, and the HF generator Fpedpfsq Sdc Uox Akvek

Condition: used, Year of construction: 1978, Technical details: bore capacity in steel (diameter): 100 mm arm length: 400 - 2100 mm cantilever adjustment vertical: 100 mm spindle taper MT: 50 drill depth: 415 mm spindle stroke: 400 (Skala) mm column turnable: 360 ° column diameter: Ø 500 mm Fedpfju Id Awsx Akvopk distance drilling head - clamping area: min./max.: 400 / 1.800 mm number of spindle speeds: 12,5 ... 1.600 / 15 step U/min feed: 0,063 ... 2,5 / 15 step mm/U table clamping surface:: L x B: 2.000 x B: 950 mm total power requirement: ca. 35 kW weight of the machine ca.: o. Würfel = 8,0 t dimension machine xH: 3,40 x 1,16 x 3,51 m further information: - drilling spindle travel horizontal 1.700mm Equipment: - incl. drilling cube (horizontal surface: 1000 x 1000 x 500 mm, central bore Ø 35mm; 6 T-slots), (vertical surface: 1,000 x 500mm, 3-T-slots) - control panel - coolant system *

Condition: new, bore capacity in steel (diameter) 60 mm bore capacity in cast iron (diameter) 70 mm threading cutting capacity: M50 throat 420 mm bore stroke 260 mm spindle taper MK 5 feed range - spindle 0,1-0,2-0,3-0,4-0,5-0,6 mm/U spindle turning speed range 64 - 1210 U/min transmission ratio 12 Stufen column diameter 220 mm table surface area 600 x 600 mm total power requirement 4 kW weight of the machine ca. 0,82 t dimensions of the machine ca. 0,7 x 1,2 x 2,7 m Equipment: - Gears made of hardened and ground steel - Front speed selector lever Fjdpfx Ajfg U Tuskvopk - Gear lubrication by automatic oil pump - Integrated coolant device - Machine lamp - Rotatable and tiltable table - Automatic feed with electromagnetic clutch - Handwheel for manual fine feed - automatic tool ejector - Integrated electrical controls in the drill head - Pushbutton for EMERGENCY STOP - Switch for right / left rotation - Height-adjustable chip protection hood with microswitch - CE mark

Condition: refurbished (used), Year of construction: 1997, 1997 CMA Roby 5 EX Anthropomorphic painting robot (self-learning) complete with electrostatic gun and generator. Sames generator and gun. Fsdpfjxwctfex Akvjpk

Condition: good (used), Year of construction: 1999, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, • Worktable 1200 x 750 mm with 5 T-slots • Arm travel 1050 mm • Drill spindle Morse taper 4 • Infinitely variable speed control • Infinitely variable quill feed • Thread cutting device • 2 T-slots (18 mm) each, machine base rear and left • Machine lamp • Central lubrication • Table surface machined on all sides • Safety guard on drill • Coolant system Dimensions and Travel Tool holder MT 4 Column diameter mm 195 Table dimensions mm 1200 x 750 Number of T-slots 5 T-slot spacing mm 125 Quill stroke mm 220 Column stroke mm 450 Distance spindle nose to table min. mm 40 max. mm 710 Distance spindle nose to base plate min. mm 840 max. mm 1510 Drilling radius min. mm 540 max. mm 1590 Working table height mm 900 Machining Data Drilling capacity solid material St 60 Ø 45 mm GG 22 Ø 55 mm Thread cutting St 60 M 36 GG 22 M 45 Main Spindle Drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle Speed range rpm 15 - 2800 Torque Nm max. 250 Constant from rpm 15 - 200 Feed Drives Feed, stepless mm/rev 0.02 - 0.7 Fpjdsylnpijpfx Akvsk Feed force N 12,000 Electrical Data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 9.3 Weight DANUFLEX 145 (without packaging) with 750 x 1200 mm table kg 2,600 Documentation Operating manual, incl. Lubrication and hydraulic diagram Electrical schematic

Condition: new, cutting diameter 330 mm capacity 90 degrees: flat 510 x 320 mm capacity 90 degrees: square 320 x 320 mm capacity 45 degrees: flat 350 x 320 mm capacity 45 degrees: round 320 mm capacity 45 degrees: square 300 x 300 mm capacity 60 degrees: flat 230 x 310 mm capacity 60 degrees: square 200 x 200 mm capacity 60 degrees: round 200 mm turning speed range: 15 - 100 m/min dimensions of saw-band 4640 x 34 x 1,1 mm engine output 4,0 kW weight 1190 kg Equipment: - robust electro-hydraulic semi-automatic band saw machine (INDUSTRY) - with miter cuts from 45° right to 60° left * Miter adjustment via large turntable - MEP microprocessor control EVO to control all functions Fpsdjxaa Tzspfx Akvjk * front right, rotatable - optional manual or automatic lowering of the saw bow * stepless adjustment of the saw bow lowering - saw band guide made of hard metal plates - hydraulic saw band tension - including digital value display - 2x saw band speeds - 1x BI-metal saw band - coolant device - 1x angle stop - chip removal brush - machine base frame with forklift pockets - operating instructions in German Functioning of semi-automatic operation: - electro-hydraulic clamping of the vice - electro-hydraulic lowering of the saw bow - electro-hydraulic raising of the saw bow - electro-hydraulic opening of the vice

Condition: excellent (used), Year of construction: 2017, Model UR3 CB3 – year 2017 – used but in perfect working condition – with original packaging Robot weight: 11 kg Payload: 3 kg Maximum reach: 50 cm IP rating: IP64 Average power consumption: 125 W Fjdpfowx E Rrex Akvjpk Repeatability: ± 0.01 mm Linear speeds: 1 m/s Power cable length: 6 m Arm – Control box cable length: 6 m Teach Pendant (control tablet) cable length: 4.5 m Price: €8,500.00 (+VAT)