Used Radial Drilling Machines for sale (66,828)

Condition: used, Radial drilling machine with table WEBO type HRH 100 / 3000 Machine No. 10009555/7 -- 1110185 -- 6046 -- Year of manufacture 1979 Drilling capacity: Ø 100 mm in ST 60 at a feed rate of 0.5 mm/rev. Nominal overhang: 3000 mm Maximum overhang: max. 3100 mm Spindle mount: MK 6 Spindle speed: 22.4 - 1600 rpm, 36 steps Feed rate: 0.05 - 2.5 mm/rev, 18 steps Distance spindle - baseplate: 970 - 2335 mm Quill stroke: 325 mm Swivel range of the arm: 360° Traverseable on bed, bed length: 7500 mm Clamping area of the table: 8000 x 2100 mm - Electric central clamping device - Drilling unit on the machine bed, traversable lengthwise by electric motor - Table consisting of 2 clamping plates with 7 x T-slot, (length 4000 x width 2100 x plate thickness 360 mm) Space requirement L x W x H: 8000 x 4550 x 4300 mm Maximum height: 4300 mm Transport height (bed with drilling machine): approx. 3150 mm Iedpfxjfbt Huj Ahbetn Transport weight (bed with drilling machine): approx. 20 tons Transport dimensions table: L x W x H 4000 x 2100 x 900 mm (2 plates stacked on top of each other) Transport weight table: approx. 14 tons Good condition

Condition: used, Year of construction: 1985, Bohrleistung in Stahl (-Ø 45 mm throat 1250 mm workpiece height max. 1100 mm swival range ° height adjustment 745 mm base plate surface area 1450 x 920 mm Itsdpfx Ahovcrmpobjn Bohrspindel-Ø/ Aufnahme 90 mm / MK 5 bore spindle stroke 355 mm max. torque on the spindle 250 Nm feed power 14000 N turning speed range 20 - 1200 U/min feed range 0,063 - 0,63 mm/U power capacity 3,7 kW weight of the machine ca. 3,0 t dimensions of the machine ca. 2,1 x 0,9 x 3,3 m • cube table 650 x 650 x 500 mm, • coolant device

Condition: used, Year of construction: 1978, 40 1008 rated current 20 A Ijdpfx Aowg Hunohbstn voltage 24 V weight of the machine ca. 3,5 t

Condition: good (used), Year of construction: 1995, Used radial drilling machine from Foradia Model: GR 50 1200 Itedpoytb Eyjfx Ahbon Arm length: 1200 mm Drilling capacity up to: 50 mm Year of manufacture: 1995

Condition: good (used), Year of construction: 1996, Radial drilling machine type Reform RB50x12 for sale in good condition. Capacity: Max. 50mm in steel. Arm lenght: 1250mm Spindle distance to column min: 350mm Taper: MK5 Stroke: 315mm Spindle speeds: 25 – 2000 rpm, in 16 steps Feed rates: 0.04-3.2 mm/rev Main motor 3kW Weight: 3000kg Dimensions: 2150x1060x2840mm Itedexftk Rjpfx Ahbjn Machine clamps hydraulically, equipped with emergency stop. Under power in our warehouse.

Condition: used, bore capacity in steel (diameter) 120 mm arm length 2500 mm workpiece height max. ca. 1800 mm bore capacity in cast iron 160 mm drilling radial min./max. 880 / 2825 mm throat min. 555 mm column diameter 650 mm bore spindle diameter /taper 90 / MK 6 mm diameter of quill 160 mm bore spindle turning speed range 10 - 660 U/min bore depth 650 mm feeds 0,07 - 3,0 mm/U distance spindle/base plate min. 300 / max. 2100 mm vertical adjustment of the arm 1150 mm Iedpfxovh Ncxs Ahbetn base plate surface area 3000 x 1550 mm total height of machine 4500 mm total power requirement 15 kW weight of the machine ca. 16 t - right-/left spindle run - thread cutting device Accessories: DRO HEIDENHAIN on X-and Z-axis (arm and boring depth)

Condition: new, Year of construction: 2026, A large and stable radial drilling machine with a large range of revolutions which ensures precise and fast machining. Machine features Large weight and sturdy design ensure stability and vibration-free operation Cube table provides adjustability and easy fixture of workpiece Control panel located at the front of the machine for improved convenience Ground column surface provides easy, precise arm travel Machine equipped with manual head and column arm limiter Large speed range for accurate and quick machining Technical data Maximum drilling diameter 35 mm (cast iron); 30 mm (steel) Itedoi D Da Ajpfx Ahbon Distance from spindle to base 360–1300 mm Distance from spindle axis to column surface 260–1300 mm Spindle extension 200 mm Spindle taper MK4 Spindle speed ranges (6): 75, 130, 240, 380, 660, 1200 rpm Spindle feed ranges (3) 0.10; 0.16; 0.25 mm/turn Vertical arm travel speed 1.3 m/min Arm rotation 360° Main motor power 2.2 kW Lifting motor power 0.75 kW Worktable dimensions 510×380×305 mm Machine dimensions 800×1800×2150 mm Weight 1400 kg Default equipment B16 (3-16 mm) Drilling chuck B16/MK4 Drilling chuck mandrel MK4/MK3 reduction Wedge for taper removal The price is a net price. Price does not include shipping costs. For more information, please contact us by phone or e-mail. We invite you to familiarize yourself with the offer on our website.

Year of construction: 1981, condition: used, machine/vehicle number: 77-8101, Lg-Nr. 01501, Technical specifications: Itodpob Ennksfx Ahbsn - Drilling capacity in steel 28 mm - Thread cutting device - Drill spindle mount MK 3 - Drill spindle stroke 160 mm - Table dimensions approx. 750 x 500 mm - Overhang up to approx. 620 mm - Vertical stroke of the arm 600 mm - Column diameter 250 mm - Spindle speeds in 12 steps 80 - 2800 rpm - 3 feed rates 0.1 + 0.15 + 0.25 mm/rev - Drill spindle drive 400 V / 5.5 kW - Coolant system - Space required approx. W 1100 x H 1550 - 2150 x D 950 mm - Weight approx. 1200 kg - Operating manual

Condition: used, Radial drilling machine WEBO Type R4bR Serial No. 15 / E195 Year of manufacture: approx. 1965 Drilling capacity: 50 mm Spindle taper: MT 5 Maximum spindle outreach: approx. 1250 mm (to column) Clamping surface: 1400 x 1000 mm Column diameter: 315 mm Spindle speed: 30 - 1325 rpm, 9 steps Feed: 0.12 - 2 mm/rev, 9 steps Electrical connection: 380 Volt, 50 Hz - Spindle speed in 9 steps - Motorized height adjustment of the boom Isdpfxsu T Ty He Ahbstn Required floor space for operation (L x W x H): 220 x 100 x 285 cm Transport dimensions (L x W x H): 220 x 100 x 260 cm (without motor for height adjustment) Weight: approx. 2.8 t.

Condition: new, Year of construction: 2024, Power: 1.35kW Speed range: 230 - 3100 rpm Speed steps: 9 Spindle holder: MK-2 Drilling stroke: 85 mm Spindle projection: 140 - 540 mm Iedpfjuix Sgjx Ahbetn Table size: Table size: 500 x 740 mm / 250 kg load capacity Head inclination: 90° left / 45° right Column diameter: 80 mm Quick-action chuck: 1 - 16 mm Weight: 240 kg

Condition: good (used), functionality: fully functional, Radial drilling machine BWF BR40 * 15 speeds * min. speed: 22.4 rpm Iodpjviu Nmefx Ahbotn * max. speed: 2800 rpm T slot table: * Length: 1600mm * Width: 800mm Machine dimensions: * Length: 2500mm * Height: 2800mm * Width: 1000mm

Condition: good (used), Asquith radial drilling machine offered. Type: ODI X-travel: 910 mm Z-travel: 640 mm Itsdpfeh U Iaxox Ahbjn Stroke spindle: 350 mm Diameter spindle: 65 mm Speed max: 1550 RPM Table: 510 x 1000 mm Bed: 1280 x 795 mm Dimensions: 240x125x293 cm LxWxH For more information call us or send an e-mail.

Condition: new, bore capacity in steel (diameter) 50,0 mm arm length 350 - 1.590 mm workpiece height max. 645 - 1.240 mm turning speeds 25 - 2000 U/min spindle taper MT 5 MK base plate 980 x 1.600 mm threading 42 M quill stroke 320 mm total power requirement 4,0 kW weight of the machine ca. 3.500 kg. range L-W-H 2450 x 980 x 2840 mm Description : - Large-sized base plate - ideal for processing large workpieces - Thick-walled, polished column for increased sliding properties of the boom - Extension arm and drill head with independent hydraulic clamping - Simple height adjustment of the extension arm using a lifting motor - Ideal for drilling, countersinking, reaming and thread cutting - Hardened and ground gears, running in an oil bath - Good sliding of the drill head on the boom thanks to the ground surface scope of delivery : - Cube table - Reducing sleeves MK 5/4, MK 4/3, MK3 / 2 - LED machine light - First filling with Shell Tellus 46 - coolant device - lifting motor - hydraulic motor - operating tool - Height-adjustable protective cover Ijdexaad Tspfx Ahbjtn

Condition: new, bore capacity in steel (diameter) 40.0 mm threading 30 M workpiece height max. 380 - 785 mm arm length 985 mm spindle taper 4 MK boring head swiweling right/left -80 / +80 Grad table surface area 1210 x 520 mm turning speeds 50 - 2000 U/min column diameter 220 mm column diameter 220 mm table surface area 1210 x 510 mm quill stroke 200 mm feed range - spindle 0.08 - 0.50 mm/U total power requirement 2.2 kW weight of the machine ca. 2800 kg dimensions of the machine ca. 2450 x 1200 x 2720 mm characteristics - A variety of clamping and machining options thanks to the construction-related construction Itjdpoxaadyefx Ahbjn - Electromotive height adjustment of the drill head without adjusting the Drilling position, ideal for deep hole drilling - Drill head can be swiveled 180 °, boom can be moved back and forth and horizontally pivotable - Thread cutting device and 6 automatic drilling feeds in the Basic equipment included - Large table surface (1195 x 500 mm) for simultaneous clamping several workpieces - Digital speed and drilling depth display included in the scope of delivery - Quick set-up of the drill head on the workpiece, the clamping takes place hydraulically - Heavily ribbed column ensures great rigidity of the boom - Stable construction guarantees vibration-free work - As standard with electronically infinitely variable speed control scope of delivery - Electromagnetic spindle feed - Digital speed display - Digital drilling depth display - Electromotive drill head adjustment - First filling with Shell Tellus 46 - Keyless chuck 1 - 13 mm / B 16 - Drill chuck arbor MK 4 / B 16 - Reducing sleeve MT 4/3, 4/2, 3/1 - Thread cutting device - LED machine light - coolant device - Height-adjustable protective cover

Condition: excellent (used), CATALOGUE NUMBER 8005 TECHNICAL DATA - Number of spindles: 21 pcs - Distance between extreme spindles: 640 mm - Distance between spindles: 32 mm - Pneumatic clamps: 2 pcs - Table surface dimensions: 870x560 mm - Height to table surface: 900 mm - Feed cylinder stroke: 65 mm - Vertical/horizontal and angled drilling adjustment Itjdpfxozr U Ece Ahben - Drilling unit adjustment, pneumatic - Main motor: 1.5 kW - Dimensions (L/W/H): 1000x1150x1240 mm - Weight: 370 kg ADVANTAGES - For 21 spindles – drill bit mounting with quick-release couplings - Vertical, horizontal and angled drilling - Unpainted - Used drilling machine, very good condition Net price: 7900 PLN Net price: 1840 EUR, depending on the exchange rate of 4.3 EUR (Prices may vary due to significant exchange rate fluctuations)

Condition: good (used), Drilling capacity: Ø 50 mm Spindle fitting: MT5 Spindle speeds: 18 - 2,000 rpm Spindle stroke: 400 mm Maximum horizontal arm travel: 1,250 mm Maximum spindle to floor plate distance: 1,600 mm Itjdpoy Ia Azefx Ahben Equipped with: - Thread-cutting device - Drilling table Machine weight: 4,500 kg Machine dimensions (LxWxH): 2,800 x 1,000 x 3,500 mm

Condition: used, functionality: fully functional, Manufacturer: MAS-KOVOSVIT Machine type: Radial drilling machine Condition: used, good technical condition, ready for operation Isdpfx Aex Uqcfjhbjtn Technical specifications: • Drilling capacity in steel: 80 mm • Drilling capacity in cast iron: 110 mm • Arm length: 4,000 mm • Vertical arm travel: 1,600 mm • Horizontal head travel: 3,470 mm • Spindle taper: Morse 6 • Spindle diameter: 65 mm • Spindle stroke: 475 mm • Spindle speed: 9–1,400 rpm • Feed rate: 0.035–2.8 mm/rev • Distance spindle nose to table: 710–2,785 mm • Max. workpiece height: 2,785 mm • Drilling diameter range: 80–300 mm • Swing range: 0°–360° • Total power: 13.8 kW • Weight: approx. 19.5 t • Overall dimensions (L×W×H): 6,010 × 1,800 × 5,205 mm Equipment: • 2 worktables Location: Machine in stock in central Poland. Further information available upon request.

Condition: new, Year of construction: 2026, CORMAK 3040x1300 Radial Drill Press The CORMAK 3040x1300 radial drill press is an advanced industrial machine designed for precise drilling operations in materials such as steel and cast iron. The machine features a robust column construction and a wide range of radial arm adjustments, providing excellent stability and flexibility when machining large workpieces. Its key advantage is the ability to drill holes up to 40 mm in diameter while maintaining high precision. Main advantages of the CORMAK 3040x1300 radial drill press Heavy-duty construction weighing 1400 kg – ensures exceptional stability and vibration reduction, resulting in precise drilling and extended cutting tool life. Adjustable radial arm with a reach of 360–1300 mm – enables drilling in large and irregular workpieces without repositioning, increasing flexibility and reducing setup time. MK4 spindle taper with six speed settings (75–1200 rpm) – allows precise adjustment of machining parameters for different materials, enabling drilling holes up to 40 mm in steel and cast iron. 200 mm spindle stroke – allows deep drilling in a single cycle, improving production efficiency. 2.2 kW main motor – provides high torque for reliable continuous operation with optimized energy consumption. 0.75 kW arm lifting motor – enables smooth and fast vertical adjustment of the radial arm at a speed of 1.3 m/min, improving operator ergonomics. Cube worktable measuring 510 × 380 × 305 mm – allows secure mounting of irregularly shaped workpieces, increasing machining safety and accuracy. Ergonomic control panel – positioned at the front of the machine for intuitive operation and quick parameter adjustment, minimizing downtime. Ground column surface – ensures smooth and precise arm movement, eliminating play and improving positioning accuracy. Manual head and arm locking system – increases safety and stability during drilling by preventing uncontrolled movement. Three spindle feed rates (0.10, 0.16, 0.25 mm/rev) – provide precise control of the drilling process according to the material and machining requirements. Standard equipment B16 drill chuck (3–16 mm) Drill chuck arbor B16/MK4 Reduction sleeve MK4/MK3 Drift key Cube worktable 510 × 380 × 305 mm Operating manual Technical specifications Parameter Value Maximum drilling diameter 40 mm Spindle axis to column distance 360–1300 mm Spindle axis to table surface distance 260–1300 mm Itsdpfx Ahsi D Daqjben Spindle stroke 200 mm Spindle taper MK4 Number and range of spindle speeds 6: 75, 130, 240, 380, 660, 1200 rpm Number and range of spindle feeds 3: 0.10; 0.16; 0.25 mm/rev Vertical arm travel speed 1.3 m/min Arm rotation 360° Main motor power 2.2 kW Arm lifting motor power 0.75 kW Worktable dimensions 510 × 380 × 305 mm Machine dimensions 800 × 1800 × 2150 mm Weight 1400 kg

Condition: new, Year of construction: 2026, The RD700 VARIO is built on a solid column structure that ensures stability and vibration resistance. The radial arm enables precise head positioning from 300 to 700 mm relative to the column, while a quill stroke of 130 mm allows comfortable drilling in one setup. Key Components Spindle: Morse taper MT3 with drawbar, stepless speed control, maximum drilling capacity 32 mm. Feed system: Automatic spindle feed with three ranges, integrated with tapping mode. Main motor: 1.5 kW, 400 V, designed for continuous operation. Table and base plate: 250×250×250 mm cube table and 900×620 mm work plate with T-slots. Precision and Performance With stepless speed regulation and digital indicators, the RD700 VARIO guarantees high machining accuracy and repeatability. The automatic feed and tapping mode reduce cycle times, while the rigid construction minimises vibrations and extends tool life. Applications The CORMAK RD700 VARIO radial drilling machine is ideal for mechanical workshops, toolrooms, production plants, and maintenance departments. It is perfect for machining steel elements, welded structures, machine parts, and industrial components. Standard Equipment Cube table Base Drill chuck 3–16 mm / B18 Mandrel MT3 / B18 Reducing sleeve MK3 / MK2 Cooling system Tapping mode Digital spindle speed indicator Digital drilling depth indicator Adjustable height guard Basic tool set Safety guards User manual CE certification Ijdpfeyccn Usx Ahbjtn Technical Data *The price quoted is for the machine itself, excluding optional/additional equipment, installation, transport and training— please contact our consultant for more details. Parameter Value Maximum drilling capacity 32 mm Maximum tapping capacity M22 Spindle taper MK3 Minimum spindle speed 75 rpm Maximum spindle speed 2,500 rpm Speed change Stepless (75–438 / 438–2,500) Automatic feed range (3) 0.08 / 0.14 / 0.22 mm/rev Spindle–column distance 300–700 mm Spindle–table distance 0–430 mm Spindle–base plate distance 175–680 mm Vertical arm travel 505 mm Horizontal head travel 400 mm Quill stroke 130 mm Column diameter 150 mm Cube table size 250 × 250 × 250 mm Base plate work area 900 × 620 mm Motor power 1.5 kW Power supply 400 V Width 1,220 mm Depth 640 mm Height 1,750 mm Weight approx. 722 kg

Condition: excellent (used), functionality: fully functional, Soraluce TR3 2500 radial drilling machine, drilling capacity in steel: 80mm, drilling capacity in cast iron: 100mm, boring capacity: 100mm, spindle diameter: 100mm, Morse taper: 5, quill stroke: 310mm, number of speeds: 12, ranging from 25 rpm to 1440 rpm, with slotted table or indexing head. Weight of the radial drilling machine: 11 tons + table or indexing head. Iedpfx Aszbzy Hjhbotn

Condition: ready for operation (used), Year of construction: 1984, total width: 1,600 mm, overall weight: 5,500 kg, arm 1600 mm; drilling capacity 55 mm; hydraulic clamping; stroke 6000 mm; weight 5500 kg. Iedjy Dqy Nepfx Ahbjtn

Condition: as good as new (ex-display), 21-spindle single-head drilling machine, suitable for all carpentry needs, ideal for joining a work center to save time and release it from horizontal drilling operations. PNEUMATIC HEAD ROTATION - with lock and stop reference from 0° to 90°at any angle. SIDE REFERENCE FENCES - Adjustable cast iron fences on a metric scale thanks to a magnify glass and nonius. PATENTED SPIRAL SYSTEM - Device for boring depth adjustment, allowing an easy and quick set-up on a millimetric scale according to the different drill lengths. no of drilling spindles 21 # Ijdpfsd Supgsx Ahbjtn distance between drilling spindles 32 mm working width 640 mm max drilling depth 65 mm no. of pneumatic work piece clamps 2 # work piece dimensions max 900 x 3000 x 60 mm motor 1,5 kWm 50 Hz, 400 V, 2800 rpm pneumatic pressure requirement 6-8 bar compressed air consumption 10 l/cycle suction DM 80 mm machine dimensions L x W x H = 1030 x 1030 x 1285 mm weight 240 Kg

Condition: good (used), 1 used radial drilling machine manufactured by Stimin type GR 820 H No. 773 year 2004 Itsdpjtzctmjfx Ahben Technical data: Drilling capacity 80 mm throat 1600 mm Drill spindle holder MK 6- drill spindle stroke 390 mm Spindle speed, 24 steps 20 - 1400 rpm Clockwise and counter-clockwise rotation Feed rate, 12 steps 0.045 - 1.5 mm/rev Drive 400 V / 14.5 kva Clamping of the arm and drilling unit electromechanical Distance machined machine bed - drilling quill min. approx. 400 mm max. approx. 1800 mm usable machine bed with 4 T-slots 1170 x 2185 mm Coolant device 2 clamping tables Space requirement approx. L 2600 x H 3950 x W 1300 mm Weight approx. 8500 kg

Condition: used, Year of construction: 1997, bore capacity in steel (diameter) 32 mm Itjdpeztf Ausfx Ahbsn arm length ca. 920 mm

Condition: used, Year of construction: 1957, Technical details: bore capacity in steel (diameter): 32 mm arm length:: 1000 horizontal adjustment of the boring slide: 700 mm vertical adjustment of arm: 600 (motorisch) mm swivel range of the arm: 90° rechts/links Grad distance table - lower edge spindle: min./max.: 200 / 1120 mm spindle taper MT: 4 bore spindle stroke: 420 (manuell-automatisch) mm range of revolutions per minute - continous: 20 - 2000 / 3 step U/min feed: 01, / 0,2 / 0,3 / 0,4 / 0,8 / 1,2 mm/U column diameter: 250 mm base plate surface area: 1100 x 600 mm total power requirement: 4,6 kW weight of the machine ca.: 2,5 t Ijdjvhbpqspfx Ahbjtn dimension machine xH: 1,8 x 0,8 x 2,5 m Tool ejection via expulsion wedge Equipment: Coolant system with pump (without feed) Drill cube L: 760 x W: 500 x H: 510mm / horizontal surface 760 x 500mm and vertical surface 760 x 510mm Machine ilumination *