Used Radial Drilling Machines for sale (64,812)

Condition: good (used), Year of construction: 1988, Fast Radial Drilling Machine Hersteller: Donau Type: DR 40 DIGI STEUERUNG: NC Steuerung Construction year 1988 EINSATZBEREICHE - BOHREN Bohrleistung Gesamtloch (Stahl): 40 mm Neck (max): 800 mm SPINDLE / PIN Spindle speed (min): 335/min Cedpsikvcasfx Ab Tjhf Spindle speed (max): 1800/min Anzahl der Gänge: 2 Werkzeugaufnahme: MK 4 ON SPECIFICATION Table surface: 1200 x 750 mm ELEKTRISCHE VORSCHRIFTEN Mains voltage: 400 V Mains frequency: 50 Hz ABMESSUNGEN / GEWICHTE Width: 2500 mm Depth: 1250 mm Total height: 2500 mm Weight 2.6 t Drive 6kw

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Equipment: lighting, rotational speed infinitely variable, type plate available, Out of insolvency: Erlo Iberdrill AZ 34 Year of construction 2020 Speeds infinitely variable via potentiometer 80-2010 rpm automatic feed 0,1--0,2--0,3 Digital speed display Coolant pump Thread cutting function with foot switch working light Pinol stroke 150mm throat depth 300mm Mounting MK 4 Csdpfx Asrfxqljb Tjhf Röhm Supra 3-16mm drill chuck Table clamping surface 330x320mm Height of the machine 1930mm Weight approx. 350kg 3KW power 380 Volt

Condition: used, throat depth: 1,600 mm, Radial Drilling Machine BREDA R50 Arm reach: 1600 mm Drilling capacity in steel: diameter 50 mm Automatic feed: 0.06 - 1.0 mm/rev Codpfx Absxv A H Ao Tohf Spindle speed: 30 - 1200 rpm

Condition: good (used), Year of construction: 2013, machine/vehicle number: 157098, Offer 25404 Technical Data: Chjdsxvzx Dspfx Ab Tof - Drilling capacity in steel ST 60: 32 mm - Boring capacity (enlarging): 40 mm - Drill spindle taper: MT 4 - Drill spindle stroke: 250 mm - Arm reach min / max: 200 / 1000 mm - Arm vertical travel: 600 mm - Min / max distance spindle - base plate: approx. 550 - 1060 mm - Machined base plate clamping area: W 700 - 800 mm - Spindle speeds: 71 - 1800 rpm - 4 feeds: 0.13 - 0.54 mm/rev - Drill spindle drive: 400 V / 2.2 kW - Cube table - Coolant system - Space requirement approx.: W 750 x H 2350 x D 1750 mm - Weight approx.: 1300 kg

Condition: good (used), Maximum drilling diameter in steel 50 mm Minimum overhang (minimum distance of the spindle axis from the body) 450 mm Csdpfx Abjttriws Tshf Maximum overhang (max. distance of spindle axis from the body) 1600 mm Minimum spindle speed 20 1/min Maximum spindle speed 2000 1/min

Condition: new, Drilling capacity steel ----- 50 mm Motor ----- 4 KW Speed range ----- 25 ~ 2000 r/min Spindle stroke ----- 315 mm Unloading ----- 350 ~ 1600 mm Spindle mounting ----- MK5 Spindle feed ----- 0.04~ 3.2 mm/rev Cube table----- 630 x 500 x 500 mm Column diameter ----- 350 mm Foot ----- 2400 x 1000 x 200 mm Maximum distance spindle - foot ----- 350 ~ 1220 mm Weight ----- 3500 KG Cedpfxega Ty Ne Ab Tohf INCLUDED * Hydraulic clamping ! * Cooling system * CE plug * SCHNEIDER electricity

Condition: excellent (used), functionality: fully functional, drilling capacity: 40 mm, spindle speed (max.): 1,655 rpm, spindle mount: MK 4, overall weight: 2,500 kg, type of input current: three-phase, Radial Drilling Machine OOYA RE 1000 Radial Drilling Machine for Sale in Excellent Condition Manufacturer: OOYA Machinery Works Co. Ltd "JAPAN" Type: RE-1000A Speed ​​range 50% 12 Segments 32-1655 r/min (50 Hz) Projection 1000 mm Spindle holder MK 4 Drilling capacity in steel (diameter): 35 mm Cedpfx Abewvufge Tjhf Drilling capacity in cast iron (diameter): 40 mm Arm vertical travel distance: 650mm Spindle diameter: 60 mm Column diameter: 320 mm Clamp base plate: 1020x650mm Clamping block: 450 x 650 x 500 mm ca Spindle diameter: 60 mm Column diameter: 320 mm Power: 3 x 200v 50Hz (Japanese voltage standard) Main motor: 2.2 kW Arm lift motor: 1kw Coolant pump motor: 50 watts Weight: 2.5 t Space requirement approx. 2.1 x 1.16 x 3 m If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: used, Year of construction: 1978, 40 1008 Cedpewg Hunsfx Ab Tohf rated current 20 A voltage 24 V weight of the machine ca. 3,5 t

Condition: used, Radial Drilling Machine BERGONZI type UT 25 Spindle: CM3 Spindle exit: 150 mm Spindle speed: from 130 to 900 RPM Arm travel: 500 mm Max height table/spindle nose: 900 mm Column: Ø 180 mm 2 speeds motor Auto descent Return Spring defective Electric arm rise Delivered with: 1 cube Length 500 mm x Depth 400 mm x Height 450 mm 1 false table Lubricant pump Voltage: 380 V Length: 1500 mm Width: 900 mm Cjdpfexu Icyex Ab Tjhf Total height in height position: 2300 mm Weight: approx 1,2 T

Condition: ready for operation (used), Year of construction: 1986, arm 1250 mm, drilling capacity 55 mm, hydraulic locking Cjdpfexdht Dsx Ab Tshf

Condition: new, throat depth: 1,600 mm, drilling capacity: 50 mm, Drilling diameter in steel [mm]: 50 Distance from spindle axis to column [mm]: 350 - 2000 Horizontal travel of the spindle head [mm]: 1600 Distance from spindle nose to base machining surface [mm]: 320 - 1220 Vertical arm movement [mm]: 600 Arm swivel angle [°]: +/- 360 Spindle taper [-]: MT5 Spindle speed range [rpm]: 20 - 1600 Number of spindle speeds [-]: 16 Chjdpfx Aev Evkdob Tef Spindle feed range [mm/rev]: 0.4 – 3.2 Number of spindle feeds [-]: 16 Quill extension [mm]: 300 Main motor power [kW]: 4 Machine dimensions (LxWxH) [mm]: 3000x1060x2800 Weight [kg]: 4500

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 7694, table width: 250 mm, table length: 300 mm, overall weight: 200 kg, spindle speed (max.): 1,420 rpm, No reserve price – guaranteed sale to the highest bidder! The machine is being auctioned due to a business liquidation. Placing a bid obliges the buyer to collect the machine on time between 26.01.2026 and 29.01.2026! TECHNICAL DETAILS Spindle speed: 160 to 1,420 rpm Table dimensions: 300 x 250 mm Number of T-slots: 2 MACHINE DETAILS Dimensions & weight Dimensions (L x W x H): 700 x 450 x 1,900 mm Chjdpfxexqntks Ab Tef Weight: 200 kg

Condition: good (used), Year of construction: 1995, Used radial drilling machine from MAS Capacity ø 63mm Chodpfjxqfx Dex Ab Tef Equipped with drilling cube

Condition: used, Year of construction: 2015, arm length 3000 mm taper MK 5 hydraulic clamping ja dismantled nein Chodpfxow Syk Eo Ab Tjf

Condition: used, Radial Drilling Machine SCHLUMBERGER type RF6 Manual raising Codpjxu Icmjfx Ab Tjhf Cone: CM4 Spindle speed: from 35 to 1800 RPM Table size: 1000 x 650 mm Column slide travel along bed: 750 mm Maxi distance spindle nose/table: 700 mm (in high position) Mini distance spindle nose/table: 250 mm (in low position) Manual up/down of table + column Automatic descent Rotation at 360° on column Hydraulic column locking Drilling / tapping function Lubricant pump Voltage: 380 V Width: 1400 mm Depth: 900 mm Height in low position: 2650 mm Height in high position: 3000 mm Weight: approx 3 T

Condition: not inspected (used), functionality: fully functional, Maintained radial drilling machine drilling capacity in steel: 40,0 mm throat: 1300 mm tool holder: MK4 max. swivel angle: +/- 180 degrees quill stroke: 280 mm Min. distance column - drilling spindle (X) 593 mm Max distance column - drilling spindle (X) 1473 mm Speed: 52 - 2000 rpm (12 steps) Feed rate: 0,05-0,1-0,2-0,3 mm/rev (4 steps) column diameter: 250 mm spindle diameter: 68 mm clamping area: approx. 1445 x 810 mm operating voltage: 400 V Total power requirement: 5.5 kW Machine weight: approx. 2815 kg. Space requirement (L x W x H): 2010 x 820 x 2495 mm Equipment: - electric height adjustment - hydraulic clamping of the drilling slide and the column - cube clamping table with T-slots Codjirngajpfx Ab Tjhf - automatic spindle feed - R/L run of the drilling spindle - electric height adjustment from boom - speed adjustment manual - feed adjustment manual - handwheel for drill carriage adjustment We will be pleased to demonstrate the machine under power on site. All data without guarantee. Subject to prior sale. The object of purchase is sold under exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations of the seller and for any injury to life, limb and health.

Condition: used, Year of construction: 1978, Technical details: bore capacity in steel (diameter): 100 mm arm length: 400 - 2100 mm cantilever adjustment vertical: 100 mm spindle taper MT: 50 drill depth: 415 mm spindle stroke: 400 (Skala) mm column turnable: 360 ° column diameter: Ø 500 mm distance drilling head - clamping area: min./max.: 400 / 1.800 mm number of spindle speeds: 12,5 ... 1.600 / 15 step U/min feed: 0,063 ... 2,5 / 15 step mm/U table clamping surface:: L x B: 2.000 x B: 950 mm total power requirement: ca. 35 kW weight of the machine ca.: o. Würfel = 8,0 t dimension machine xH: 3,40 x 1,16 x 3,51 m further information: - drilling spindle travel horizontal 1.700mm Equipment: - incl. drilling cube (horizontal surface: 1000 x 1000 x 500 mm, central bore Ø 35mm; 6 T-slots), (vertical surface: 1,000 x 500mm, 3-T-slots) - control panel Chjdpfx Abeu Id Awe Tjf - coolant system *

Condition: not inspected (used), functionality: unexamined, machine/vehicle number: 10100, table width: 300 mm, table length: 400 mm, spindle speed (max.): 1,400 rpm, drilling depth: 150 mm, No reserve price – guaranteed sale to the highest bidder! The machine is being auctioned due to company closure. Placing a bid obliges timely collection between 26.01.2026 and 29.01.2026! TECHNICAL DETAILS Spindle speed: from 200 to 1,400 rpm Drilling depth: up to 150 mm Table dimensions: 400 x 300 mm Slots: 2 MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 800 x 600 x 1,900 mm Weight: 300 kg Chjdexqdw Ejpfx Ab Tjf

Condition: used, Year of construction: 1999, ja Hydraulische klemmung weight of the machine ca. 3,3 t t Codpfx Ajw Syf Aeb Tshf

Condition: used, Radial Drilling Machine SCHLUMBERGER 36-12 Spindle: Ø 110 mm - Right rotation Cone: CM4 Spindle exit: 200 mm Rotation: from 40 to 750 RPM Chodpsxu Ibpofx Ab Tjf Table size: 1000 x 700 mm Slide travel: 700 mm Automatic descent Recent electrical panel Lubricant pump Voltage: 380 V Back table dimensions: 1200 x 750 mm Machine support dimensions: 1400 x 1200 mm Total height in height position: 2800 mm Total height in low position: 2550 mm Weight: approx 3,5 T

Condition: used, Year of construction: 1976, Technical details: bore capacity in steel (diameter): 32 mm arm length: ./x. . 400 / 50 mm drill head horizontal traverse: 400 mm drilling head vertical adjustable: 400 mm bore spindle stroke: 150 mm Codpfxowi Iqvj Ab Tohf spindle taper MT: 4 grinding spindle speed: 100 - 2000 U/min Arm length: Spindel: min./max: ca. 400 / 50 mm cantilever adjustment vertical: 850 mm cantilever adjustment horizontal: 400 mm arm: Länge: 1360 arm horizontal: schwenkbar mm/min number of revolutions per minute of drill spindle:: 100...2 step U/min. feed steps: 0,1 / 0,2 / - step mm/U Table dimensions: 00 x 510 mm distance table - lower edge spindle: min./max.: 350 / 800 mm total power requirement: 2,4 kW weight of the machine ca.: 1,8 t dimension machine xH: 1,3 x 1,3 x 2,25 m Equipment: 2x foot rail Attachment option for a vertical table Accessories: Various clamping devices *

Condition: used, Radial Drilling Machine OTTO MULLER Spindle: CM4 Spindle speed: from 70 to 1400 RPM Front table size: 1350 x 550 Back table size: 1000 x 400 mm Slide travel: 1000 mm Maxi distance spindle nose/front table: 600 mm Motor: 2 speeds Maxi column rise: 400 mm Auto descent Drilling/tapping function Spindle speed adjustment by belt variation Hydraulic locking Chodpfx Aexu Iareb Tsf Lubricant pump Voltage: 380 V Dimensions in low position: W 1500 x D 2400 x H 2300 mm Weight: approx 2 T

Condition: used, Year of construction: 1972, Technical details: bore capacity in steel (diameter): 25 mm distance drilling head - clamping area: min./ max.: 200 / 600 mm drill head horizontal traverse: 400 mm drilling head vertical adjustable: 200 mm bore spindle stroke: 150 mm spindle taper MT: 3 grinding spindle speed: 102 - 2000 / 12 step U/min Arm length: min. / max. 200 / 600 mm Table dimensions: horizontal 930 x 390 mm Table dimensions: vertical 600 x 630 mm dimension machine xH: 1,4 x 1,1 x 2,1 m Codowtcttepfx Ab Tehf The machine is currently in the technical department. Boom: Length: 1250mm; vertical adjustment 200mm; horizontal adjustment 400mm, swivel 360°. i.D. *

Condition: used, Radial Drilling Machine GSP type 49S22 Chsdpfx Asxu H Uujb Tof Spindle: Ø 125 mm Cone: CM6 Spindle exit: 600 mm Spindle speed: from 17 to 1050 RPM Arm travel: 1800 mm Maxi height column travel: 1800 mm Column diameter: Ø 600 mm Total column height: 3000 mm Spindle speed: 11 kW Drilling/tapping function Mechanical locking of the column Hydraulic locking of the trolley Auto descent Delivered with one cube Cube dimensions: L 800 x W 560 x H 600 mm Table size: L 3300 x W 1400 x H 320 mm Voltage: 380 V Weight: 12 T

Condition: used, Technical details: bore capacity in steel (diameter): 32 mm arm length:: 275-800 workpiece height max.: 1.040 mm horizontal adjustment of the boring slide: 180 mm vertical adjustment of arm: 800 mm distance table - lower edge spindle: 1.040 max -350 min mm spindle taper MT: MK 4 range of revolutions per minute - continous: 63 - 1.600 / 8 step U/min swivel range of the arm: 360 Grad feed: 0,125/0,200/0,315 mm/U column diameter: 180 mm base plate surface area: 730 x 500 mm weight of the machine ca.: 1,2 t dimension machine xH: 1,75x0,56x1,97 m Cooling water system with pump and supply to the spindle * Chsdpfxswa Rzle Ab Tsf