Used Radial Drill for sale (5,344)

Condition: good (used), Year of construction: 2015, total width: 1,800 mm, total length: 3,700 mm, total height: 4,300 mm, overall weight: 14,000 kg, Maximum drilling capacity in steel: 75 mm Length:3700mm Lsdpjzi S Snofx Aftehi Width:1800mm Height:4300mm Weight:14000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: refurbished (used), Year of construction: 1996, functionality: fully functional, drilling capacity: 40 mm, quill stroke: 200 mm, quill diameter: 80 mm, Dimensions and travel paths Tool holder SK 40 Table dimensions mm 4000 x 800 Number of T-slots 6 Distance between T-slots mm 140 Distance between spindle bottom edge min. mm 140 Table top edge max. mm 740 Drilling radius min mm 540 max. mm 1590 U-axis travel path mm 2600 Y-axis travel path mm 1050 Quill stroke (Z-axis) mm 200 Column stroke (W-axis) mm 400 Cutting values Drilling capacity into solid material St 60 mm 40 GG 22 mm 50 Thread cutting St 60 M 36 GG 22 M 42 Main spindle drive AC motor, frequency-controlled kW 5.5 at 100% duty cycle. Speed range: min -1 15 - 2800 Torque Nm max. 250 constant from min -1 15 - 200 Feed drives X-axis - AC servo motor kW 0.25 Y-axis - AC servo motor kW 0.25 Z-axis - AC servo motor kW 4.50 W-axis - AC servo motor kW 2.50 U-axis - AC servo motor kW 2.50 Rapid traverse speeds (X/Y/Z): m/min. 7.5 / 7.5 / 5 Rapid traverse speeds (U/W): m/min. 7.5 / 3 Feed rates infinitely variable mm/min. 5 - 2000 Feed force N 12000 Accuracy Positioning accuracy X, Y axis up to 1200 mm mm ± 0.075 Repeatability X, Y axis mm ± 0.03 Positioning accuracy Z axis mm ± 0.05 Repeatability Z axis mm ± 0.03 Positioning accuracy W axis mm ± 0.05 Repeatability W axis mm ± 0.03 Electrical data Operating voltage / frequency V / Hz 400 / 50 Control voltage V 24 Total connected load kVA 13.0 CNC control Axes: 5 (X, Y, Z, W, U), expandable Screen: TFT flat screen backlit, easy to read from all sides Position information: Cartesian or polar, dimensions absolute or incremental, Unit of measurement: mm or inch or in degrees Interpolation: 2 axes (X, Y) Technology database: tool management, tool suggestions according to machining type, cutting data suggestions depending on material Tool management: max. 500 tools Sub-program technology: yes Machining cycles: cycles for centering, drilling, thread cutting, reaming, countersinking and boring, freely programmable cycle for special tools, dwell time possible for each cycle Chip breaking / chip removal: possible for drilling cycle Drilling patterns: row of holes, circle of holes, matrix Basic software: programming in dialog, 38 zero point shifts, turning and mirroring, teach-in for X, Y, Z, restart in the program with optional functions for targeted entry Zero point determination: cycles for determining zero points by manually touching the workpiece for: - any clamped right-angled parts - any clamped round parts - mediation of cast and burnt parts - Angular position detection for round parts by touching - reference edges or surfaces Data interfaces USB interface Ljdpfx Afjv If T Tjtshi Painting (new painting) Standard painting, two-component textured paint Machine upper part light gray RAL 7035 Machine lower part signal blue RAL 5005 Documentation Operating and programming instructions Electronics circuit diagram Spare parts drawings Test report for mechanics, electrics and safety equipment

Condition: excellent (used), Year of construction: 1972, machine/vehicle number: 42 473, Manufacturer: Meuser Type: M 70 R Year of manufacture: 1970 Condition: very good, fully functional Technical data: Overhang: 1800 mm Drill spindle mount: MK6 Drilling capacity, max.: 120 Table size: 2000 x 1100 mm Rotary table: 700 x 700 x 500 mm Weight: 8000 kg With support column Hydraulic and electrical diagrams are available. Lhjdpfx Afjlp Iqmotei

Condition: used, Clamping cube for radial drilling machine Clamping plate, clamping cube, clamping block Clamping surface on top: L x W = 600 x 500 mm Clamping surface on the side: L x H = 600 x 460 mm Overall height: 505 mm T-slots: 20 mm Lodpfezinz Sox Aftohi T-slot spacing: 150 mm Overall dimensions L x W x H: 680 x 500 x 505 mm Weight: 150 kg Good condition

Condition: good (used), Machines pictures 1 to 9 Gillardon price 9500,-€ Technical data: - Drilling capacity into solid steel ST 60 32 mm - Drilling capacity GG 25 40 mm - Thread cutting ST 60 M 27 - Drill spindle holder MK 4 - Quill stroke 150 mm - 12 drill spindle speeds 102 - 2000 rpm - 3 drilling feeds 0.1 - 0.3 mm - min. / max. distance spindle - table 310 / 610 mm - Drilling radius min / max 400 / 1200 mm - Table height 720 mm - Table size 1200 x 500 mm - Drive 400 V / 1.6 / 2.9 kW - Space requirement approx. W 1200 x H 2800 x D 2300 mm - Weight approx. 1500 kg - with: - Thread cutting device - hydr. columns + boom clamping - Coolant device - Vertical T-slots on the rear side of the machine Machine 2 pictures 10 to 15 HKS 34 MT Price 16.500,-€ Drilling capacity 45mm Ledpju Nm Niofx Aftshi Table size : 1200 x 560 mm drilling capacity 45mm Spindle holder MK 4 quill stroke 170mm Speed / steps 70-2000 rpm Feed rate / steps 0.1 0.2 0.3mm/rev Motor 2.9 KW

Condition: new, Technical data: Drilling capacity steel Ø: 50 mm Drilling capacity cast iron Ø: 60 mm Tapping steel Ø: 40 mm Tapping capacity cast iron Ø: 50 mm Diameter of the column: 300 mm projection (min/max): 305 - 1275 mm travel of the spindle head (horizontal): 970 mm distance spindle nose - base plate (min/max): 438 - 1330 mm Traverse height of the cantilever: 625 mm Clamping surface of cube table : 635 x 520 x 420 mm size base plate : 1830 x 785 x 185 mm spindle mounting: MK 5 spindle stroke: 270 mm Speeds: (12) 44 - 1206 min-1 feeds: (3) 0.06 / 0.10 / 0.20 mm/rev. Motor power, approx.: 3,7 kW Total height, max.: 2795 mm Weight, approx.: 2300 kg Lsdpfx Afep Atipotjhi Features: - Simple one-button operation with integrated circuit for automatic release of swing arm movement, automatic stop and automatic clamping. - Boom arm and drill head with independent hydraulic clamping. - A special lift safety device prevents the arm from falling off abruptly or moving on its own, even after a long period of use and corresponding wear. This safety device protects the operator from injury even if the threaded nut is excessively worn. - The column, arm and gearbox can be clamped simultaneously by pressing a button. Standard Equipment: - Threading device - Coolant device incl. pump - machine light - cube table 635 x 520 x 420 mm - Operating tools in box - Operating instructions and spare parts list - protection device for spindle - CE

Condition: new, Radial drilling machine with hydraulic clamping and thread cutting device. Technical data: Drilling capacity steel Ø: 50 mm Drilling capacity cast iron Ø: 60 mm Thread cutting steel Ø: 40 mm Thread cutting cast iron Ø: 50 mm Diameter of the column: 320 mm Projection (min/max): 330 - 1650 mm Travel of the spindle head (horizontal): 1320 mm Ljdsuxrtfopfx Aftjhi Distance spindle nose - base plate (min/max): 465 - 1405 mm Travel height of the cantilever: 670 mm Clamping surface cube table: 630 x 500 x 500 mm Base plate size: 2550 x 970 x 200 mm Spindle holder: MK 5 Spindle stroke: 270 mm Speeds: (12) 37 - 1253 1/min Feed rates: (3) 0.06 / 0.10 / 0.20 mm/rev Motor power, approx.: 3.7 kW Max. total height: 2790 mm Weight, approx.: 3300 kg Features: - Simple one-button operation with integrated circuit for automatic release of swing arm movement, automatic stop and automatic clamping. - Boom arm and drill head with independent hydraulic clamping - A special lifting safety device prevents the arm from dropping abruptly or moving on its own, even after a long period of use and corresponding wear. This safety device protects the operator from injury, even if the threaded nut is excessively worn. - The column, arm and gearbox can be clamped simultaneously by pressing a button. Standard equipment: - Tapping device - Coolant device incl. pump - Machine light - Cube table 635 x 520 x 420 mm - Operating tools in box - Operating instructions and spare parts list - Protective device for spindle - CE

Condition: good (used), Table size: - horizontal: 500 x 600 mm - vertical: 310 x 600 mm Tiltable: 90° Dimensions L x W x H, approx.: 700 x 520 x 520 mm Weight, approx.: 280 kg Leded Tticopfx Aftshi Art. No.: WW12214

Condition: used, Year of construction: 1988, Dalmastroj BRB-3 Conventional quick-feed radial drilling machine Condition: Used Year of manufacture: 1988 Technical data: Drilling capacity in steel: Ø 30 mm Overhang: 430 - 1000 mm Column diameter: 200 Workpiece height: 500 mm Drill spindle taper: MK 4 Speed range: 100 to 1120 rpm (8 speeds) Head swivel: 360° Motor power: 1.4 / 1.8 kW Connection: 400 V Machine weight: approx. 2100 kg incl. accessories Equipment: - Coolant foot with pump - Thread cutting device Lhjdpfxszhuale Aftei - Drilling depth stop - Drill chuck

Condition: good (used), Year of construction: 1962, High speed radial drilling machine, radial drilling machine, drilling machine, boom drilling machine, high speed radial drilling machine -Clamping table: 400 x 1100 mm Lhedoirax Ujpfx Aftei -Projection: 930 mm -Taper mount: MK4 -Engine power: 1.35/1.8 kW -Speed: 41-1700 rpm -Columns: Ø 200 mm -Spindle stroke: 125 mm -Thread cutting device: YES -Feed: 0.075 - 0.3 mm/rev -Dimensions: 1800/1235/H2240 mm -Weight: 1500kg

Year of construction: 1963, condition: used, Radial drilling machine, drilling machine, boom drilling machine, universal drilling machine, milling machine -Projection: 645 mm -Taper mount: MK3 -Speeds: 95 - 1050 rpm -Columns: Ø 190 mm -Spindle stroke: 195 mm -automatic feed: 0.05/0.10/0.20 mm/rev -Clamping table: 735 x 520 mm Lodpfx Asdvnbxeftohi -Dimensions: 1350/705/H2170 mm -Weight: 1100 kg

Condition: used, Year of construction: 1976, machine/vehicle number: 2791, functionality: fully functional, throat depth: 1,300 mm, drilling capacity: 50 mm, We are selling our radial drilling machine, which is still in use and in working order. Weight approximately 2.5 tons. Will be gladly loaded to the buyer; shipping/transportation costs are borne by the buyer. Ledpfx Ajwku H Teftjhi

Condition: ready for operation (used), Year of construction: 2012, WAGNER PRC 40 – Outrigger drilling machine / Radial drilling machine - Year of manufacture: 2012 - CE marking - COMPLETE TECHNICAL DATA – SEE PHOTO - Automatic feed - Morse taper MK 4 - Speed range: 25-2000 RPM - Coolant system Lsdpfxezi Av Ds Aftohi - Rotary table - Documentation Dimensions: L x W x H 2.5 x 1.1 x 2.65 meters / Weight: 3500 kg Errors and omissions excepted.

Condition: ready for operation (used), Radial Drill, Used Equipment Brand: CSEPEL Model: R.F. 2a Lsdpsw Db Nujfx Aftohi Description: Column Diameter: 350 mm Vertical Travel of the Arm: 1200 mm Horizontal Travel of the Drill Head: 1000 mm Vertical Travel of the Spindle: 400 mm Spindle Diameter: 65 mm 12 Spindle Speeds: 47.5 – 2100 RPM 8 Feed Rates: 0.048 – 1.2 m/min Motor Power: 9 HP

Condition: ready for operation (used), Radial Drilling Machine, Kovosvit VO 50, Used Machine Manufacturer: Kovosvit (Czech Republic) Model: VO 50 Arm length (throat depth): 1250 mm Drilling capacity in steel: max. 50 mm Drilling capacity in cast iron: max. 60 mm Ljdpfxew Hanhj Aftehi Spindle stroke: 310 mm Spindle taper: Morse taper MK-5 Speed range: 28–2500 RPM Feed range: 0.05–2 mm/rev Motor power: 4 kW Installed power: 6 kVA Machine dimensions (LxWxH): 3120 x 1030 x 2750 mm Weight: approx. 4200 kg

Condition: used, Year of construction: 1997, Technical details: bore capacity in steel (diameter): 32 mm x-travel: 750 mm y-travel: 520 mm drill capacity in cast iron: 45 mm revolution per minute: 90 - 4500 U/min feed steps: 6 bore spindle stroke: 250 mm boring spindle diameter: 30 mm drill spindle - Morse Taper: MK4 vertical adjustment of the arm: 520 mm throat max.: 1000 mm throat min.: 250 mm column diameter: 400 mm swivel range of the arm: 180 ° table clamping surface LxW: 1150 x 800 mm total power requirement: 3,5 KW weight of the machine ca.: 2000 kg dimension machine xH: 1,7 x 1,07 x 2,61 m The KOVOSVIT VO 32 is a robust and versatile radial drilling machine designed for industrial applications. The machine is suitable for drilling, boring, countersinking, reaming, and tapping operations in steel, cast iron, and other materials. Thanks to its swiveling radial arm and large reach, even large and heavy workpieces can be machined conveniently without the need for complex repositioning. Lsdpfx Aezgwgfjftehi The machine features a massive cast-iron construction, a powerful main drive, and an automatic feed system. The drilling head can be moved along the radial arm, providing a large working area. Its solid design ensures high precision, reliability, and a long service life, even under continuous operation. *

Condition: like new (used), Donau Donauflex 135 High-Speed Radial Drilling Machine Manufacturer: Donau Model: Donauflex 135 Year of manufacture: 2020 Condition: Very good, used but like new Available immediately from stock. Lhedjzgvmqepfx Aftei

Condition: excellent (used), Year of construction: 1988, Drilling capacity in steel (diameter) 40 mm Overhang 1,250 mm Spindle mount MK 5 Drilling spindle stroke 355 mm Lhodszgdfbjpfx Aftoi Speed range 20 – 1200 rpm Machine weight approx. 3.0 t

Condition: as good as new (ex-display), Year of construction: 2024, Optimum OPTIdrill RD 6 Precise, solid radial drilling machines of top quality. Ideal for versatile use in single-part and series production. • Versatile application range, such as drilling, reaming, and threading • Electrically braked motor • 24V DC electrical system and 2-channel safety chain according to DIN EN 12717 • Heavy, solid, high-quality cast iron • Wide reach thanks to horizontally adjustable machine head • Clearly arranged control panel • Smooth-running swivel and travel axes • Elaborately machined column swivel with optimized clamping for maximum stability and minimal clamping offset • Robust, torsion-resistant boom construction • Boom height adjustment via powerful motor drive and lifting spindle • Drill head gear running in an oil bath • Boom guideways hardened and precision-ground • Chrome-nickel steel gears, hardened and precision-ground, ensuring quiet and smooth operation • Drill head and column can be clamped together or separately or loosened • Right-left rotation • Solid, precise drilling table, generously dimensioned • Hardened and ground clamping table with parallel T-slots • Machine light • Overload protection • Thick-walled cast iron column ensures smooth operation and stability • LED lamp • Coolant system with coolant tank in the machine base RD 6 / RD 7 • Column is hydraulically clamped Dimensions and Weights Column diameter 320 mm Length approx. 2670 mm Width/Depth approx. 1120 mm Height approx. 2760 mm Weight approx. 3200 kg Extension arm Rotation angle 180° Drilling capacity Lhedpfx Aswa Tc Softsi Drilling capacity steel (S235JR) 50 mm Continuous drilling capacity steel (S235JR) 45 mm Drilling table T-slot size 14 mm T-slots Number: 4 T-slot spacing: 180 mm Maximum distance between spindle and drilling table: 1420 mm Clamping table length: 630 mm Clamping table width: 500 mm Clamping table height: 500 mm Clamping table T-slot size: 22 mm Number of T-slots on the clamping table: 3 Clamping table T-slot spacing: 150 mm Min. distance between spindle and clamping table: 0 mm Max. distance between spindle and clamping table: 910 mm Min. distance between spindle and drilling table: 465 mm Speed range: Speed range: 44 – 1023 rpm Number of speed ranges: 12 Electrical data: Total power consumption: 6.5 kW Connection voltage: 400 V Mains frequency: 50 Hz Machine base: Working surface length: 2550 mm Working surface width: 970 mm Motor(s) Spindle motor drive power: 4 kW Drive power Cantilever arm lifting motor 1.5 kW Coolant pump power of drive motor 90 W Hydraulic clamp drive 0.75 kW Spindle Quill stroke 270 mm Spindle mount MT5 Quill feed speed 0.06 – 0.2 mm/rev Quill feed speeds 3 Travel path Drill head travel (horizontal) 1250 mm Arm stroke (vertical) 680 mm Maximum spindle-column distance 1600 mm Minimum spindle-column distance 350 mm

Condition: excellent (used), functionality: fully functional, RADIAL DRILLING MACHINE BREDA Lsdoziluvepfx Aftjhi 1250 X 55 MODEL R55 TYPE: 125 USED MACHINE INTERNAL CODE: SVR 319

Condition: good (used), Year of construction: 1968, machine/vehicle number: 68113, Offer 24456 Technical data: - Drilling capacity in steel ST 60 approx. 60 mm - Drilling capacity, enlarging holes approx. 80 mm - Thread cutting up to approx. M 40 - Drill spindle mount MK 5 - Drill spindle stroke 380 mm - Overhang min. / max. approx. 420 / 2000 mm - Column diameter approx. 500 mm - Stroke of the arm approx. 1350 mm - Min. / max. distance: - Spindle – base plate approx. 370 - 1700 mm - Work area on base plate approx. 1100 - 2300 mm - 12 spindle speeds 19 - 1900 rpm - 9 feed rates 0.09 - 0.75 m/rev - Drill spindle drive 400 V / 10 kW - E - central clamping system - Coolant system - Space required approx. W 1400 x H 3400 x D 3600 mm - Weight approx. 7500 kg Lsdpfx Aszii Sfsftehi

Condition: ready for operation (used), functionality: fully functional, RADIAL DRILLING MACHINE Lhodpfxoziciqo Aftji DORMAC 1250 X 50 RAPID 50 MODEL USED MACHINE INTERNAL CODE: SVR 219

Condition: excellent (used), Radial drilling machine P50 Lhodpfjziazdox Aftei

Condition: used, Year of construction: 1980, taper MK 3 feed: 4 Stufen 2580 x-travel 2500 mm throat 1000 mm 1000/2800 mm Lhsdpezfqmpjfx Aftji weight 3,7 t

Condition: good (used), bore capacity in steel (diameter) 28 mm arm length 700 mm workpiece height max. 1300 mm tool taper MK3 feeds 0,1-0,3 mm/U spindle turning speed range 100-1.220 U/min total power requirement 1,4 kW weight of the machine ca. 1,3 t dimensions of the machine ca. LBH 1,8 x 0,8 x 2,3 m Incl. cube table Lhodpfozfqmcox Aftsi Incl. drilling feed Mechanical clamping