Used Radial Drill for sale (5,500)

Condition: used, Year of construction: 1974, throat max. 2000 mm throat min. 405 mm bore capacity in steel (diameter) 65 mm bore capacity in cast iron 80 mm spindle taper MT 5 drilling depth in one stroke 475 mm vertical adjustment of arm 875 mm base plate surface area 2455 x 1100 mm spindle turning speed range 19 - 1320 U/min feeds 0,07 - 2,9 mm/U Gksdpfx Asw Id Exefioc total power requirement 10 kW weight of the machine ca. 8 t

Condition: ready for operation (used), Technical data without guarantee Working range Drilling capacity: 60 mm Drilling capacity, cast iron: 70 mm Tapping capacity, cast iron: M 50 Tapping capacity, steel: M 45 Max. drilling depth: 315 mm Gedjw Ilrmjpfx Afiskc Swing: 350 mm - 1600 mm Distance spindle nose - table surface: 350 mm - 1250 mm Drill head travel (horizontal): 1250 mm Main spindle Speed range: 38 rpm - 2000 rpm Spindle taper: 5 MT Feed Feeds: 0 mm/min - 300 mm/min Drive power Main drive motor power: 4 kW Lifting motor: 1.5 kW Dimensions and weight Dimensions (L x W x H): 2.49 m x 1.05 m x 2.78 m Weight: 3800 kg

Condition: repair required (used), Witzig & Frank high-speed radial drilling machine LEO 32 AS Gksdpfx Astrnr Tsfijc Defects: (Clamping no longer works, running noises present)

Condition: used, Clamping plate with T-slots made of cast steel/grey cast iron Base plate for radial drilling machine Assembly table, assembly station, base plate for column slewing crane Length 1850 mm Width 915 mm Plate thickness 230 mm Table surface with T-slots 1030 x 750 mm - Clamping surface with T-slots 22 mm, spacing = 250 mm - Top side milled parallel to the underside = clamping surface - Underside also milled, ribs rest flat and support Godpfxoh R D Uzs Afiskc - Ideal as a base plate Net weight 1140 kg good condition

Condition: good (used), DONAU DR 40 Z - High-Speed Radial Drilling Machine incl. Tools - Drill spindle taper MK 4 - Quill diameter 55 mm - Quill stroke 220 mm - 18 spindle speeds 35-1800 rpm - Drill feeds 0.075–0.60 mm/rev - Column height adjustment 450 mm - Drilling radius min/max 305–1005 mm - Table size 1200x600 mm - Drilling capacity / steel 40 mm - Drilling capacity / cast iron 50 mm - Thread cutting unit / steel / M33 - Thread cutting capacity / cast iron / M45 - Various tools included, see photos Dimensions: LxWxH 1.9x2.3x2.8 meters / Weight 1800 kg Errors and omissions excepted. Godpew En Slofx Afiokc

Condition: new, Drilling capacity cast iron / steel ----- 31.5 / 25 mm Tapping capacity cast iron / steel ----- 20 / 16 mm Speed range ----- (8) 100 ~ 1600 rpm Spindle stroke ----- 135 mm Unload ----- 300 ~ 720 mm Spindle intake ----- MK3 Spindle feed ----- 0.08 / 0.14 / 0.22 mm/omw Cube table----- 250 x 250 x 250 mm Column diameter ----- 150 mm Gedpfxjq E Izmj Afiekc Foot ----- 1200 x 620 mm Maximum distance spindle - base ----- 275 ~ 680 mm Motor ----- 1.1 KW Voltage ----- 400V / 3 Phase Weight ----- 580 KG INCLUDING * Cooling system * CE plug * SCHNEIDER electrics OPTION * Floor cabinet

Condition: used, Year of construction: 1974, throat max. 2000 mm throat min. 405 mm bore capacity in steel (diameter) 65 mm bore capacity in cast iron 80 mm spindle taper MT 5 drilling depth in one stroke 475 mm vertical adjustment of arm 875 mm base plate surface area 2455 x 1100 mm spindle turning speed range 19 - 1320 U/min feeds 0,07 - 2,9 mm/U total power requirement 10 kW weight of the machine ca. 8 t Gksdpsw Id Ersfx Afiec

Condition: ready for operation (used), Rotational speed: 37-1900/min, an inspection is possible. Gksdjqvnmfepfx Afioc

Condition: good (used), Stock no.: 3024 Manufacturer: GSP Year of manufacture: Type / Model: 405T125 Machine no.: 2913 Drilling capacity: 40 mm Spindle taper: MK 4 Gkedpfew Rkc Aox Afisc Speed range: 40 to 1,800 rpm Feed: 0.09 to 0.36 mm/rev Control: conventional Arm reach: 250 to 1,250 mm Cube table: 800 x 560 x 600 mm Footprint: 1,800 x 800 mm Total connected load: kW Accessories/Equipment: clamping cube Condition: good, ready for operation Weight: approx. 1 t Dimensions: 2,000 x 800 x 2,500 mm

Condition: used, Radial drilling machine CSEPEL type RFh 75 / 1500 Machine no. No. 13704 Year of construction 1985 Drilling capacity in steel Ø 75 mm Drilling capacity in cast iron Ø 90 mm Spindle holder MK 5 Nominal throat depth 1500 mm Largest projection of the spindle 1500 mm (to the column) Smallest projection of the spindle 440 mm (to the column) Distance spindle nose - clamping surface 370 - 1700 mm Cantilever height adjustment 950 mm Table size / clamping surface 1800 x 1100 mm Column diameter 450 mm Pinol stroke 380 mm Spindle speed 19-1900 rpm 21 steps Feed rate 0.047-2mm/rev. 12 steps Motor power 11 kW Mains connection 380 Volt, 50 Hz, 15 kW - Clockwise/anticlockwise rotation of the drilling spindle via hand lever switch - Hydr. gear shift for spindle speed and feed speed - Hydro-mechanical central clamping - Motorized boom height adjustment - Without coolant device - Machine light - Operating instructions Gksdpfx Aolhwr Refioc Space requirement: Length 2720 mm x width 1170 mm x height max. 3770 mm Transport height with motor on the column: 3500 mm Transport height without motor on the column: 3250 mm Weight: 6.3 tons good condition

Condition: good (used), COLETT / GAMESA - Radial drilling machine, mobile use possible using crane - Arm approx. 1200mm Godpfxsw Dpn Es Afiekc - Universal angle head - Spindle speeds 95 - 750 rpm - Automatic feeds - Morse taper MK 4 - Arm height adjustable approx. 1400mm - Control cabinet - retrofit Dimensions: LxWxH 2x1x2.1 meters / Weight 1500 kg Errors and input mistakes excepted.

Condition: new, Year of construction: 2024, Power: 1.35kW Speed range: 230 - 3100 rpm Speed steps: 9 Spindle holder: MK-2 Drilling stroke: 85 mm Spindle projection: 140 - 540 mm Table size: Table size: 500 x 740 mm / 250 kg load capacity Head inclination: 90° left / 45° right Column diameter: 80 mm Quick-action chuck: 1 - 16 mm Weight: 240 kg Gksdpouix Sgofx Afioc

Condition: not inspected (used), Maintained radial drilling machine drilling capacity in steel: 40,0 mm throat: 1300 mm tool holder: MK4 max. swivel angle: +/- 180 degrees quill stroke: 280 mm Min. distance column - drilling spindle (X) 593 mm Max distance column - drilling spindle (X) 1473 mm Gkodpfxsirngao Afijc Speed: 52 - 2000 rpm (12 steps) Feed rate: 0,05-0,1-0,2-0,3 mm/rev (4 steps) column diameter: 250 mm spindle diameter: 68 mm clamping area: approx. 1445 x 810 mm operating voltage: 400 V Total power requirement: 5.5 kW Machine weight: approx. 2815 kg. Space requirement (L x W x H): 2010 x 820 x 2495 mm Equipment: - electric height adjustment - hydraulic clamping of the drilling slide and the column - cube clamping table with T-slots - automatic spindle feed - R/L run of the drilling spindle - electric height adjustment from boom - speed adjustment manual - feed adjustment manual - handwheel for drill carriage adjustment We will be pleased to demonstrate the machine under power on site. All data without guarantee. Subject to prior sale. The object of purchase is sold under exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of obligations of the seller and for any injury to life, limb and health.

Condition: used, Technical details: bore capacity in steel (diameter): 32 mm arm length:: 1250 workpiece height max.: - mm distance column till spindle centre: 1250 mm drill head horizontal traverse: 980 mm vertical adjustment of arm: 800 mm distance table - lower edge spindle: 2,05 x 9,2 x 2,85 mm spindle taper MT: MK4 bore spindle stroke: 280 mm range of revolutions per minute - continous: 28-1.195 3 Steps U/min Gsdpfxjwid Aus Afiskc swivel range of the arm: 90 Grad feed: 0,1/0,2/0,3/0,4/0,8/1,2 6 Steps mm/U column diameter: 300 mm base plate surface area: 1.370 x 750 mm weight of the machine ca.: - t dimension machine xH: 2,05 x 9,2 x 2,85 m Cooling water system with feed Table with clamping surface 1,370mm x 750mm incl. drilling cube *

Condition: ready for operation (used), Radial Drilling Machine, Kovosvit VO 50, Used Machine Gksdpow Hanhsfx Afisc Manufacturer: Kovosvit (Czech Republic) Model: VO 50 Arm length (throat depth): 1250 mm Drilling capacity in steel: max. 50 mm Drilling capacity in cast iron: max. 60 mm Spindle stroke: 310 mm Spindle taper: Morse taper MK-5 Speed range: 28–2500 RPM Feed range: 0.05–2 mm/rev Motor power: 4 kW Installed power: 6 kVA Machine dimensions (LxWxH): 3120 x 1030 x 2750 mm Weight: approx. 4200 kg

Condition: used, Radial drilling machine WEBO Type R4bR Serial No. 15 / E195 Year of manufacture: approx. 1965 Gkjdeu T Ty Hjpfx Afisc Drilling capacity: 50 mm Spindle taper: MT 5 Maximum spindle outreach: approx. 1250 mm (to column) Clamping surface: 1400 x 1000 mm Column diameter: 315 mm Spindle speed: 30 - 1325 rpm, 9 steps Feed: 0.12 - 2 mm/rev, 9 steps Electrical connection: 380 Volt, 50 Hz - Spindle speed in 9 steps - Motorized height adjustment of the boom Required floor space for operation (L x W x H): 220 x 100 x 285 cm Transport dimensions (L x W x H): 220 x 100 x 260 cm (without motor for height adjustment) Weight: approx. 2.8 t.

Condition: good (used), Maximum drilling diameter in steel 50 mm Gksdpfx Asttriwsfioc Minimum overhang (minimum distance of the spindle axis from the body) 450 mm Maximum overhang (max. distance of spindle axis from the body) 1600 mm Minimum spindle speed 20 1/min Maximum spindle speed 2000 1/min

Condition: new, Drilling capacity steel ----- 50 mm Motor ----- 4 KW Speed range ----- 25 ~ 2000 r/min Spindle stroke ----- 315 mm Unloading ----- 350 ~ 1600 mm Spindle mounting ----- MK5 Spindle feed ----- 0.04~ 3.2 mm/rev Cube table----- 630 x 500 x 500 mm Column diameter ----- 350 mm Foot ----- 2400 x 1000 x 200 mm Maximum distance spindle - foot ----- 350 ~ 1220 mm Weight ----- 3500 KG Gksdpfxega Ty Ns Afioc INCLUDED * Hydraulic clamping ! * Cooling system * CE plug * SCHNEIDER electricity

Condition: used, Technical details: bore capacity in steel (diameter): 50 mm arm length: 360-1600 mm Gjdpfx Afjwutvhsiskc workpiece height max.: 320-1220 mm spindle stroke: 315 mm spindle taper: MK 5 bore spindle turning speeds : 25-2000 U/min spindle speed levels: 16 table clamping surface:: 630 x 500 x 500 mm total power requirement: 4 kW dimensions of the machine ca.: 2600 x 1120 x 2600 mm weight of the machine ca.: 3,5 t 1 pc. radial drilling machine Z3050 x 16/2- Tradefair demonstration machine/NEW Special features: - Sturdy cast iron body - Cube table - Gearbox with hardened and ground gears in an oil bath - Thread cutting via spindle reversal - Hardened and ground heavy column - Right-left rotation - Drilling depth limitation - High spindle torque - Feed overload clutch - Quiet operation - Hydraulic, switched feed and spindle gear with preselection - Hydraulic clamping of the stop, column, and drill head *

Condition: used, Year of construction: 1978, 40 1008 rated current 20 A voltage 24 V Gsdpfxswg Hune Afiekc weight of the machine ca. 3,5 t

Year of construction: 1988, condition: ready for operation (used), Drilling capacity: 35mm, drill spindle taper: MT4, quill stroke: 285mm, reach: 300mm-1000mm, speed: 2500rpm, arm length: 500mm, spindle-to-base plate distance: 1000mm, base plate dimensions X/Y: 1150mm/780mm. An on-site inspection is possible. Gedpfxew Nq Sue Afiekc

Condition: used, Radial drilling machine with plate field WEBO type HRH 100 / 3000 Machine. No. 10009555/7 -- 1110185 -- 6046 Year of manufacture 1979 Drilling capacity Ø 100 mm in ST 60 at feed rate 0.5 mm/rev. Nominal throat depth 3000 mm Max. throat depth max. 3100 mm Spindle holder MK 6 Spindle speed 22.4 - 1600 rpm 36 steps Feed rate 0.05 - 2.5 mm/rev 18 steps Spindle - base plate distance 970 - 2335 mm Pinol stroke 325 mm Swivel range of the arm 360 movable on bed, bed length 7500 mm Gsdpjfbt Huefx Afiokc Clamping area panel field 8000 x 2100 mm - Electrical central clamping - Drilling unit can be moved lengthwise on the machine bed by electric motor - Panel field consisting of 2 clamping plates with 7x T-slot, (length 4000 x width 2100 x panel thickness 360 mm) Space requirement L x W x H 8000 x 4550 x 4300 mm Maximum height 4300 mm Transport height (bed with drilling machine) approx. 3150 mm Transport weight (bed with drilling machine) approx. 20 tons Transport dimensions of panel section L x W x H 4000 x 2100 x 900 mm (2 panels stacked on top of each other) Transport weight panel field approx. 14 ton. good condition

Condition: good (used), Year of construction: 1973, bore capacity in steel diameter 55 mm arm length 1600 mm Gsdpfx Afsvwgnkoiokc workpiece height max 1600 mm - drilling capacity full bore (steel) 55 mm - throat (max) 1600 mm - workpiece height (max) 1600 mm - sleeve stroke 350 mm - space requirements -left/right- 2700 mm - space requirements -front/back- 1100 mm - total height 3400 mm - total weight approx. 4500 kg feed for quill 1: 0,056 - 2,5 mm/min. turning speeds 20 - 2000 U/min tool taper MK 5

Condition: used, Year of construction: 1999, arm length ca. 10 cm Gkjdpfx Afewk Rapjiec T-slots Aufspannwürfel ja dimensions of the machine ca. 80 x 60 cm

Condition: repair required (used), bore capacity in steel diameter / mm arm length 1000 mm workpiece height max / mm - throat (max) 1000 mm - sleeve stroke 250 mm MILLING SPINDLE / HEAD / - spindle revolutions (min) 47.5 /min - spindle revolutions (max) 2120 /min - spindle diameter 60 mm - space requirements -left/right- 2000 mm - space requirements -front/back- 750 mm - total height 2160 mm - total weight approx. 2500 kg Gkedpfevmtlhjx Afiec Machine is not 100% OK, and needs an overhaul. - Height adjustment and cross adjustment must be repaired